Help me fix my phone - Fascinate General

I'm a total newbie when it comes to flashing ROMs and whatnot.
I got clockwork installed correctly and downloaded the superclean ROM to my SD card.
I rebooted into recovery and tried a data wipe/factory reset. It ran and ran and ran for over an hour and I couldn't find any info on the web about how long it should take so I pulled the battery thinking it was hung.
I now boot up and it goes into Android System Recovery. At the bottom it says "Manual Mode"
The SD card is still installed.
It gives me the following options but I can't select any of them.
Reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe data cache partition
What can I do?

fstbusa said:
I'm a total newbie when it comes to flashing ROMs and whatnot.
I got clockwork installed correctly and downloaded the superclean ROM to my SD card.
I rebooted into recovery and tried a data wipe/factory reset. It ran and ran and ran for over an hour and I couldn't find any info on the web about how long it should take so I pulled the battery thinking it was hung.
I now boot up and it goes into Android System Recovery. At the bottom it says "Manual Mode"
The SD card is still installed.
It gives me the following options but I can't select any of them.
Reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe data cache partition
What can I do?
Click to expand...
Click to collapse
Select apply sdcard:update.zip, and press home softkey. this will take you to green recovery screen.

Odin
Your going to have to use odin! Search for instructions on flashing back to stock using odin!

Juno_Reactor said:
Select apply sdcard:update.zip, and press home softkey. this will take you to green recovery screen.
Click to expand...
Click to collapse
Awesome... that booted me back into my previous rom.... wish I would have known that earlier.
How long should I wait for Clockwork to wipe my data?

fstbusa said:
Awesome... that booted me back into my previous rom.... wish I would have known that earlier.
How long should I wait for Clockwork to wipe my data?
Click to expand...
Click to collapse
a data wipe should take no longer than 15-20 seconds...a cache wipe is usually almost instant

tapout27 said:
a data wipe should take no longer than 15-20 seconds...a cache wipe is usually almost instant
Click to expand...
Click to collapse
why is mine hanging when doing the wipe? Anything I can do to wipe it a different way?

fstbusa said:
why is mine hanging when doing the wipe? Anything I can do to wipe it a different way?
Click to expand...
Click to collapse
Did you flash clockwork within rom manager? There should be an option for the fascinate. Do it twice just for grins. The reboot into cwm and try it again.

tooch01 said:
Did you flash clockwork within rom manager? There should be an option for the fascinate. Do it twice just for grins. The reboot into cwm and try it again.
Click to expand...
Click to collapse
Yep I did that first.... I just attempted it a couple of times this morning and it seemed to work today.
It didn't get hung up saying "Wiping Data...." It went to another line and said Formatting Data and sat there for about 30 seconds and completed the wipe. I"m not sure what was different than what I did last night but it worked.

Related

Can't wipe Dalvik-cache from Recovery?

It gives me an error "Run 'wipe dalvik' via ADB.
Should I be able to run it from the recovery? I suspect my recovery ROM copied incorrectly. Is there any way I can reflash the ROM without doing a factory reset and re-rooting.
If not, then will doing a factory reset via Recovery work? And will the phone need to be reprogrammed to work on Sprint with my number, etc?
Thanks!
fatkitty420 said:
It gives me an error "Run 'wipe dalvik' via ADB.
Should I be able to run it from the recovery? I suspect my recovery ROM copied incorrectly. Is there any way I can reflash the ROM without doing a factory reset and re-rooting.
If not, then will doing a factory reset via Recovery work? And will the phone need to be reprogrammed to work on Sprint with my number, etc?
Thanks!
Click to expand...
Click to collapse
Go download the 1.5.2 recovery ROM, flash it the same way you did the original instructions are there. If you still have the issue, post back.
I have had simaler problems in the past and sometimes I was able to just reboot the system and use the fresh kitchen go to create nandroid backup in the kitchen it used adb to reboot into recovery and then everything worked fine after that.
on the other hand there have been a couple times where I just had to bite the bullet RUU and reroot then flash a backup.
hope this helps a little
dam KCarpenter you lurk here as much as I do. lol
wtphoto said:
dam KCarpenter you lurk here as much as I do. lol
Click to expand...
Click to collapse
HAHA Refresh every hour or so lol.
But I was reposting to say that you should try to wipe from the pre kitchen and see what happens there.
I re-pushed and flashed 1.5.2 recovery. I still get the "run wipe davilk from ADB" error when trying to wipe it from within the recovery rom.
What do you mean wipe it from pre-kitchen? Could someone please post some instructions.
Is there a command to run it via CMD?
I have never had it work.. even on multiple Heros. and MANY Recover re-loads
tyrnight said:
I have never had it work.. even on multiple Heros. and MANY Recover re-loads
Click to expand...
Click to collapse
I get force closes on any update I do. I thought clearing the cache fixes this problem?
If not can someone point me to instructions on starting from scratch? I would like to factory reset it but I need to know if I'll have to re-activate the phone to work on Sprint, or if it just works?
They are talking about on the Fresh Pre Kitchen 0.2 . Also if you do a wipe you will not have to activate the phone it will just reinstall the OS. I actually clearfed rteh cache using the pre-kitchen and it works fine now
athlet1c said:
They are talking about on the Fresh Pre Kitchen 0.2 . Also if you do a wipe you will not have to activate the phone it will just reinstall the OS. I actually clearfed rteh cache using the pre-kitchen and it works fine now
Click to expand...
Click to collapse
I see. I just factory reset my phone.
Now the question is; since I still I have my recovery ROM do I still need to root the phone again?
fatkitty420 said:
I see. I just factory reset my phone.
Now the question is; since I still I have my recovery ROM do I still need to root the phone again?
Click to expand...
Click to collapse
Oh, so I did a factory reset, re-rooted the phone, and installed Modaco's newest custom ROM.
I'm still getting force closes.
If I clear the cache will it fix the errors?
it depends if you just used the wipe data/factory reset in the recovery menue or if you actually used the RUU to reflash back to stock. if you used the RUU then yes you will have to reroot if you just used the recovery menue then no you will not have to.
wtphoto said:
it depends if you just used the wipe data/factory reset in the recovery menue or if you actually used the RUU to reflash back to stock. if you used the RUU then yes you will have to reroot if you just used the recovery menue then no you will not have to.
Click to expand...
Click to collapse
Great, I think I have this figured out now.
I went ahead and used Fresh's pre-Kicthen. It seems to be working great now.
Thanks guys!
Np good luck
and remember if you like any of flipzmode's stuff visit his site www.geekfor.me and help him out by either donating or at least click the adds
wtphoto said:
Np good luck
and remember if you like any of flipzmode's stuff visit his site www.geekfor.me and help him out by either donating or at least click the adds
Click to expand...
Click to collapse
I read "at least click the adds" wrong in my head and it turned out someting really dirty...
I have some problems.
I can not wipe cache and after install ROM I've got 'Force Close' apps.
How can I resolve that issues? I install again ROM and still ocurs errors.
Pls give me instructions what I must do.
Thanks
Why was I referred to this as a fix? For one, the command isn't even posted. Is their a command to wipe the dalvik-cache? If yes, what is the command that I would run?
I notice two options:
-w
Wipe the data partition
-d
Flash the data partition
Well if you don't use a2sd, this is the fix
That's a known "issue", the wipe script gives an error because it tries to wipe the dalvik-cache from the ext partition after it erased the dalvik-cache from /data. Since you don't have an ext partition it will exit and throw the error.
Don't worry about it, your dalvik-cache IS WIPED, even when you see the error.
Thanks regaw_leinad,
I kept attempting it with the latest fresh-toast rom but it would continue rebooting. It's the only rom that wouldn't have a successful dalvik wipe. I gave up and went back to damageless's SprintUpdate2.zip.
Thanks,
Zac

Cannot flash any ROM's

Hello, I have recently been unable to flash ROM's succesfully.
I have Clockwork MOD 4.0.0.2 installed as it came with CF-Root, and I am on stock 2.3.5 KI3.
I have tried flashing several roms, and while it says install complete, whenever it restarts, it is on a boot loop, where it won't go past the Galaxy S II bit with the yellow triangle, I have to flash the stock rom again using odin to even use the phone, I have tried to flash other recovery versions, like 4.0.0.14 and 5.1.2.6 (I think it is) but they all come up with errors mounting or getting recovery.log or something, could you please help?
Did you try to do a full wipe?
Most issues can be resolved by this.
In the CWM menu chose the factory reset/full wipe. (Don't worry it won't touch your files on the internal SD card)
Do a cache wipe and in the advanced menu do a dalvik cache wipe.
Some recommend to do this procedure twice, but you should be settled with doing it once
Let me know if it helped?
theMartyMcfly said:
Did you try to do a full wipe?
Most issues can be resolved by this.
In the CWM menu chose the factory reset/full wipe. (Don't worry it won't touch your files on the internal SD card)
Do a cache wipe and in the advanced menu do a dalvik cache wipe.
Some recommend to do this procedure twice, but you should be settled with doing it once
Let me know if it helped?
Click to expand...
Click to collapse
Yeah I did all that, didn't help, the progress bar gets half way and says complete :S I have downloaded the ROMs several times aswell incase they were corrupt, still didn't help.
Take out the battery, wait a bit, put it back in. Do all the wipe and formatting procedures (perhaps twice) and format the internal sd card as well and wipe the battery stats (just to be sure)
Sent from my GT-I9100 using XDA App
Backup EFS folder 1st....
ultramag69 said:
Backup EFS folder 1st....
Click to expand...
Click to collapse
That's probably not a bad idea.
Here's how:
http://forum.xda-developers.com/showthread.php?t=1068193

[Q] PLEASE HELP - JellyTime for A-501 - Stuck on Blank Screen

I Flashed JellyTime ROM available here. I updated the Gapps too. The whole installation went smooth. Tab started with JT logo and then went blank. I waited for like 10 minutes and nothing happened. I tried twice but same result. So I went back to ICS4.0.3 stock.
Can some tell me if there is a newer JT ROM or am i doing someting wrong? I wiped cache and dalvik before flash.
PLEASE HELP:crying:
PuruTiger said:
I Flashed JellyTime ROM available here. I updated the Gapps too. The whole installation went smooth. Tab started with JT logo and then went blank. I waited for like 10 minutes and nothing happened. I tried twice but same result. So I went back to ICS4.0.3 stock.
Can some tell me if there is a newer JT ROM or am i doing someting wrong? I wiped cache and dalvik before flash.
PLEASE HELP:crying:
Click to expand...
Click to collapse
You have the V8 unlocked bootloader installed, correct? If not, you'll need to have it installed first.
If so, and a recent CWM installed,
sequence should be;
a. Wipe data/factory reset
b. Wipe Cache
c. Wipe Dalvik
d. Format /system
e. Install JT
Moscow Desire said:
You have the V8 unlocked bootloader installed, correct? If not, you'll need to have it installed first.
If so, and a recent CWM installed,
sequence should be;
a. Wipe data/factory reset
b. Wipe Cache
c. Wipe Dalvik
d. Format /system
e. Install JT
Click to expand...
Click to collapse
Great!! Thanks a lot!
Only step I had missed was format /system. I thought factory reset did just that, apparently I was wrong!
Thanks again. Loving my JB on A-501.
Just one issue, Google now voice search doesn't work.
And I noticed there is a phone app. So can I make a call??

Stuck on "Starting apps." on Quarx cm-10-20130527

After a battery empty, I restarted my Defy+. But now it got stuck on "Starting apps." at the end of the boot.
I have to wipe data to make my phone ending the boot.
If I restore data which I previously backup in recovery mode, I'm still stucked with "Starting apps."
How can I debug the settings or data that avoid that? I really want to restore my data.
ronpub said:
After a battery empty, I restarted my Defy+. But now it got stuck on "Starting apps." at the end of the boot.
I have to wipe data to make my phone ending the boot.
If I restore data which I previously backup in recovery mode, I'm still stucked with "Starting apps."
How can I debug the settings or data that avoid that? I really want to restore my data.
Click to expand...
Click to collapse
Are you using the new Teamwin recvoery to flash?
Ive had the same issue ( and many more besides that) for me, to fix the problem i did this:
Go back to recovery (Teamwin) and wipe everything
re-boot, go back to recovery (team win) and flash an older rom with clock work mod recovery, and let it boot.
re- start the phone and then go back to recovery ( clockwork mod) and flash the newer CM10 rom from clcokwork mod (First wipe everything /data/dalvik/cache/factory re-set)
2Pints said:
Are you using the new Teamwin recvoery to flash?
Ive had the same issue ( and many more besides that) for me, to fix the problem i did this:
Go back to recovery (Teamwin) and wipe everything
re-boot, go back to recovery (team win) and flash an older rom with clock work mod recovery, and let it boot.
re- start the phone and then go back to recovery ( clockwork mod) and flash the newer CM10 rom from clcokwork mod (First wipe everything /data/dalvik/cache/factory re-set)
Click to expand...
Click to collapse
Thanx,
Yes Teamwin delivered with cm-10-20130527.
What I done without success:
*Flash older ROM and restore more older data with CWM
*Push with adb unzipped
I should have flashed 10 to 20 times changing some steps each time. Each time I done wipe cache, dalvik and sometimes a data format and a wipe system.
I abandoned the idea to restore my data. Have to reenter all settings manually (find and enter account settings for CSip or some solooong preshared key for Vpncilla and so on).
Then what is positive: I format my data partition to ext4. I learnt a lot from very fragmented information for all those steps. I have a fresh new install.
ronpub said:
Thanx,
Yes Teamwin delivered with cm-10-20130527.
What I done without success:
*Flash older ROM and restore more older data with CWM
*Push with adb unzipped
I should have flashed 10 to 20 times changing some steps each time. Each time I done wipe cache, dalvik and sometimes a data format and a wipe system.
I abandoned the idea to restore my data. Have to reenter all settings manually (find and enter account settings for CSip or some solooong preshared key for Vpncilla and so on).
Then what is positive: I format my data partition to ext4. I learnt a lot from very fragmented information for all those steps. I have a fresh new install.
Click to expand...
Click to collapse
You can use Nandroid Manager to use ur data while the phone is booted, so install it, it will find ur backup, and the u can do a restore of ur apps, with data.
hackergnome said:
You can use Nandroid Manager to use ur data while the phone is booted, so install it, it will find ur backup, and the u can do a restore of ur apps, with data.
Click to expand...
Click to collapse
"Nandroid Manager currently supports nandroid backups created by TWRP and Clockworkmod (v5.xx and v6.xx) based recoveries! ".
Very nice app then. Thank you too late. I immediately install it.

GT-I9505 Bricked

Hi, I have a big problem.
I flashed this ROM on the phone: I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX-FULL
And all was fine.
A few days later, the phone started lag a lot and google services (like the play store) crashed.
So, I put the teamwin recovery, I tried to do a "wipe data", but data, system, efs, cache results impossible to mount.
At this point I flashed again: "I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX-FULL.", the phone has booted, but the process "system" and google services crashed.
I flashed the clockwork recovery, I mounted and formatted "data", "cache", "system" wipe data factory, wipe cache and wipe Dalvik cache and then I flashed with odin the file "I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX -FULL. ", but the phone didn't pass the write "samsung".
At the end, I downloaded the file I9505XXUDMHB_I9505ITVDMI2_ITV and I flashed with the "pit", but the phone still not pass the bootanimation. Please, help.
Thanks.
Chuck Bartowski said:
Hi, I have a big problem.
I flashed this ROM on the phone: I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX-FULL
And all was fine.
A few days later, the phone started lag a lot and google services (like the play store) crashed.
So, I put the teamwin recovery, I tried to do a "wipe data", but data, system, efs, cache results impossible to mount.
At this point I flashed again: "I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX-FULL.", the phone has booted, but the process "system" and google services crashed.
I flashed the clockwork recovery, I mounted and formatted "data", "cache", "system" wipe data factory, wipe cache and wipe Dalvik cache and then I flashed with odin the file "I9505XXUDMH8-PRE-ROOTED-KNOX_FREE-ODEX -FULL. ", but the phone didn't pass the write "samsung".
At the end, I downloaded the file I9505XXUDMHB_I9505ITVDMI2_ITV and I flashed with the "pit", but the phone still not pass the bootanimation. Please, help.
Thanks.
Click to expand...
Click to collapse
did you wipe data and cache with stock recovery after flashing?
samersh72 said:
did you wipe data and cache with stock recovery after flashing?
Click to expand...
Click to collapse
no... i will try.
EDIT: It works, thanks
samersh72 said:
did you wipe data and cache with stock recovery after flashing?
Click to expand...
Click to collapse
I've a similar problem now, I've wiped the data and cache via stock recovery, but can't get past the Samsung splash screen.
edgasket said:
I've a similar problem now, I've wiped the data and cache via stock recovery, but can't get past the Samsung splash screen.
Click to expand...
Click to collapse
reflash the stock using another version of odin, i prefer 3.04, untick "auto-reboot", when it says "pass" remove battery, insert it, boot into recovery, wipe data and cache, reboot
samersh72 said:
reflash the stock using another version of odin, i prefer 3.04, untick "auto-reboot", when it says "pass" remove battery, insert it, boot into recovery, wipe data and cache, reboot
Click to expand...
Click to collapse
Legend! thanks, that worked... I'm on MH8 now, but at least it's working
samersh72 said:
reflash the stock using another version of odin, i prefer 3.04, untick "auto-reboot", when it says "pass" remove battery, insert it, boot into recovery, wipe data and cache, reboot
Click to expand...
Click to collapse
I've done it again... i was updating from MH8 to MJ7, used 3.04 but got stuck in a bootloop again - I've followed the steps above but it hasn't worked for me this time anything else I can try?
---------- Post added at 10:29 PM ---------- Previous post was at 10:21 PM ----------
Also tried this
Flash stock firmware with the appropriate pit file, after "pass", unplug usb cable, pull battery out for a minute, insert it, boot into recovery, wipe data and cache, reboot.

Categories

Resources