Related
Need help!
I have been messing with this phone for afew days now can't seem to get it to work. When I power the phone on all I see on the screen is green screen that says "IU BUILD! Test Only" this ws the result of a hard reset. The device is sim unlocked but I don't believe it's super cid unlocked. I'm unable to do anything except for hard resets and bootloader screen. I was going to try to reflash the original rom but can't seem to find any, I only have access to the sp3 roms which I can't use since it's not super cid unlocked. Any help would be great!!!
iMate OEM ROM
http://rapidshare.com/files/61129896/SP3_WWE_2.4.33.11.zip
Here is a link to an iMate OEM ROM. Start in bootloader and execute this to see if you can recover your device. You haven't shared much about what you phone is or how it ended up like it is. You are correct that it needs an OEM ROM, then application unlocked then Super CID unlocker before flashing a custom ROM. Good Luck and report back you results.
The phone is a Krome IQ700. In bootloader mode it shows IPL 0.27 SPL 1.01.0109 Typhoon UI. Another problem is active sync does NOT see the phone. When attempting to load any rom I get error 264. I think I might have to load rom with SD the only proble is I've never had to do this before so any help would be great. I could honestly live w/o the phone but I think this would be a great learning expirence. Thanks in advance.
after attempting your reply my phone is now dead and will not power on ...
nwdrifter said:
after attempting your reply my phone is now dead and will not power on ...
Click to expand...
Click to collapse
Remove the battery and memory card, wait 30 minutes then re-insert the battery. Hold in the camera button and then plug in the USB. If it is still alive, it will open in bootloader (Red, Green, Blue) mode.
still dead... what do you think happened?
nwdrifter said:
still dead... what do you think happened?
Click to expand...
Click to collapse
I had this once when my oem battery died. I was able to jumpstart it and get it to recharge using a 9v battery to kick it up from nearly 0V.
If you have a battery meter, you can test the contacts, looking for 4v across the battery terminals (remove battery from phon to test). If you get < 2v then you battery does not have enouge juice to power up.
Once you get power back, do you have the ROM from your OEM? You should be searching for it in the mean time. If I find anything on it, I will let you know as well.
Everything I see on your phone specs appears that it should respond and behave like all of the other Typhoons/Sp3's. As long as you followed the unlocking steps from Karhoe's post (second sticky on typhoon main page), your device should not be a brick. If you recover power, you may want to first flash an WM5 ROM from one of the posts then try to flash WM6 as this is the prescribed method starting from WM2003.
i cant get my wizard to go to bootloader ? is there a way to force it ?
thnx
about: force bootloader.
Hello my friend, please use the search options, is easy to find answer for your questions. Here you will find the solution:
http://forum.xda-developers.com/showthread.php?t=294107
note: use the wiki
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
I suggest you back to your Official rom first then start over again. I do this many times. Activesync always loose its connection before start flashing. It's a normal procedure. When you mention that your Wizard is still up and on the way, what you mean exatcly? Be more specific bringing point details on where you are stuck for instance. Then I'll try to help you out.
Good luck.
cellphoneman said:
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
Click to expand...
Click to collapse
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
joco2560 said:
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
Click to expand...
Click to collapse
epimazzo said:
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
Click to expand...
Click to collapse
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Try to enter in a bootloader mode by hold on the camera button while pressing the reset button. You'll go to bootloader. If not, remove battery one more time, wait seconds and put it in back. Then, force bootloader again and try to charge through powerwall. You should get an orange light or similar during recharging. Check your model. Hope it helps you this time.
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
which version is it ,G3 or G4,and which Rom were trying to upgrade with.
Well,if its a G3 then,there's some power problem,but if it's a G4 and you tried to flash a Rom with IPL/SPL included,well its a brick.
Yeah...unfortunately zabardast_1 is right about your device. If it is a G4 and you flashed a G3 ROM, you could have bricked your techtoy! Hope you knew what you was doing at that time!
Try to always provide enought information regarding your environment and device so we can help you out better!
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.
In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab
Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl
same in my mobile error 300
i am still trying the rom without any success. please help
i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.
stuck in bootloader
i have the same problem.
eror 300
pls help
me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair
Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2
Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali
Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
D'you mean
working Herald or any HTC?
I have the same prob
I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse
i have the same problem.
error 300
pleas help
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse
no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)
I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
I've been reading through threads for almost 2 hours and I can't seem to find one direction to go in. I have the wing in bootloader mode now as it won't boot up normally anymore, just freezes at the 'T-mobile' screen. I know I need the original RUU but can not seem to find it. I'm interested in flashing it with one of the custom roms but am open to suggestions on the best ones. I've read over a few and they all have only slight differences to me unless I've read them wrong.
IPL 4.10.0002
SPL 4.10.0000
Any help will be greatly appreciated!
Furthermore, I have tried to flash it while in the bootloader mode with a few different files and I'm getting the same error every time. It makes it to about 3% and restarts the phone and the RUU reports that the image file is corrupt...
hopefully this will help.
epicphotoeye said:
Furthermore, I have tried to flash it while in the bootloader mode with a few different files and I'm getting the same error every time. It makes it to about 3% and restarts the phone and the RUU reports that the image file is corrupt...
hopefully this will help.
Click to expand...
Click to collapse
next time search. but i thought id be nice and search for you
http://forum.xda-developers.com/showthread.php?t=345411
Why thank you sir. Guess I wasn't using the right term... I looked for 'hearld ruu' and didn't think to use 'wing' either way it ended up working however I thought I'd add this little bit in for someone incase it happens to them.
right after running this program and starting the RUU, my phone reset at 1% but I immediately held down the camera button and put it back into bootloader mode and it seemed to continue right from where it left off...
Thanks again!
epicphotoeye said:
Why thank you sir. Guess I wasn't using the right term... I looked for 'hearld ruu' and didn't think to use 'wing' either way it ended up working however I thought I'd add this little bit in for someone incase it happens to them.
right after running this program and starting the RUU, my phone reset at 1% but I immediately held down the camera button and put it back into bootloader mode and it seemed to continue right from where it left off...
Thanks again!
Click to expand...
Click to collapse
and remememer to hard-spl before trying to flash any other rom!