Hi there,
is there a possibility to change die vibration-level like it is for the calculator through registry tweak?i couldn't find any entry for this...or does one have to add an entry in the registry?
Thx!
Related
Hi.
I have just installed the phone enabled rom. Everything is fine, but it is an english version. Actually I managed to switch everything from english to german EXCEPT the hardware keyboard. I have figured out the following keys in the registry:
HKCU\ControlPanel\Keybd (this is already known and does not seem to have any effect)
HKLM\System\CurrentControlSet\Control\Keyboard Layout (this seems to activate one of the defined layouts in the 'Layout'-key)
HKLM\System\CurrentControlSet\Control\Layouts
Could anyone, who has a german keyboard layout running, check what his/her entries in these three keys are?
If anyone has another solution for this issue, I would be happy to hear from you.
Thanks alot.
Don't know wether this is the solution, but there are lots of keyboard layouts listed in:
HKLM/System/CurrentControlSet/Control/Keyboard Layouts
The German Layout has the key number 00000407.
Maybe you only need to enter that number as value in:
HKU/Default/Keyboard Layout/Preload
Good luck
retir0
Hi
Thanks for your reply. The country code for German is known, I have tried that, but it caused some major problems including not working keyboards (not even the virtual keyboard). Only transcriber was still working.
That is why I thought the registry keys
HKLM\System\CurrentControlSet\Control\Keyboard Layout
HKLM\System\CurrentControlSet\Control\Layouts
would have more effect.
If you look into the "layouts" you will find "00000409" which defines the US keyboard layout. There you will find a "Layout File" that is called "KbdNopALL.DLL" and another value called "Layout Text" containing the value "US". I was wandering if changing any of these keys would enable the QWERTZ layout of the keyboard. So if anyone that uses a QWERTZ Layout could check what settings there are in these keys (e.g. "Layout File" is the same, but "Layout Text" is "DE" or "GER"). Does anyone know anything about the "KbdNopAll.DLL"?
Looking into "00000409" I find the "Layout File" 'KBDUS.DLL' and the "Layout Text" 'US'.
By contrast in "00000407" the values are 'KBDGR.DLL' and 'German'.
I've scanned the whole registry but didn't find any KbdNopAll.dll-file on my German version Shift.
Hope I could help a bit.
retir0
hmm, maybe someone should make a Keyb.cab or REG file, that switch automaticly the right Language codes into registry.
I remember, that this issue comes up all new releases of a WWE ROM, I think there is the solution in some older posts ;-)
Anybody knows how to make a *.cab file or a Reg file for pocket PC´s?
If I know that, I can make a "batch" file for easy changing to german Keyboard layout ;-)
got it
i finally got it.
i had a false entry in
HKLM/hardware/devicemap/keybd/CurLang
the value 407 was entered in Decimal which results in a wrong Hexadecimal value. Now I have entered 407 as a hex value which equals 1031 in decimal. now the layout is correct.
damn complicated that is....
thanks for your help everybody
retir0 said:
Looking into "00000409" I find the "Layout File" 'KBDUS.DLL' and the "Layout Text" 'US'.
By contrast in "00000407" the values are 'KBDGR.DLL' and 'German'.
I've scanned the whole registry but didn't find any KbdNopAll.dll-file on my German version Shift.
Hope I could help a bit.
retir0
Click to expand...
Click to collapse
I've got the same problem with my German Treo 750. Hardware keyboard swaps z and y. I've changed all registry entries, but what I need is a kbdgr.dll to change the contents of my new created 00000407 to Layout File KBDGR.DLL and the Layout Text to German.
Has anyone got an idea where I could get this kbdgr.dll for WM 6.0?
I googled my fingertips bleeding, but only found the dll for xp - and I'm sure that this wouldn't work with my Treo.
Regards and thanks,
Reiner
Is there really nobody with a German Treo 750 to help me?
Regards,
Reiner
Hi
Can someone tell me where I can find APM Settings on the Touch HD?
I'm looking for a similar value like "SystemAPMPhoneSetting" on the Raphael.
Thanks!
My elfin auto suggest words when using keyboard on a black horzontal line above the keyboard. How can I switch to the original WM vertical list method? Is there a reg key to change?
Thanks!
I think thats build into your SIP.
Which means you cant change it, you can try googling it though.
I'd really like to get rid of that black bar as well.
Is there some way you can change the SIP?
A solution
Ok I found out how to do it and it just requires a couple of small registry changes.
Change the following entries under registry key: HKLM\System\CurrentControlSet\Control\Layouts
Ime File: compime.dll (compime.dll was in my Windows directory so I didn't need to copy it)
Layout Text: COMP IME
Soft reset and the old autocomplete that we all know and love is back, e.g. a small box with all the suggestions.
jeremy89632 said:
I think thats build into your SIP.
Which means you cant change it, you can try googling it though.
Click to expand...
Click to collapse
May not be as the keyboard is the standard WM keyboard, not the HTC one. Additionally, for some time, I managed to make the black bar go away and revert to the drop down list. But recently, I did a deep registry celarning using memmaid and somehow something was changed and it caused the blacj bar to appear again...
Wondering where in the Registry should I look for this....
Galadai said:
Ok I found out how to do it and it just requires a couple of small registry changes.
Change the following entries under registry key: HKLM\System\CurrentControlSet\Control\Layouts
Ime File: compime.dll (compime.dll was in my Windows directory so I didn't need to copy it)
Layout Text: COMP IME
Soft reset and the old autocomplete that we all know and love is back, e.g. a small box with all the suggestions.
Click to expand...
Click to collapse
I see entries under the Layouts: (Which one to change for normal Windows Mobile Keyboard?)
00000409
Layout File kbdNopAll.dll
Layout Text US
PS2_AT kbdNopAll.dll
e0010409
Ime File \windows\eT9ime.dll
Keyboard Layout 00000409
Layout Text eT9 IME
e0010804
Ime File xime.dll
Keyboard Layout 00000409
Layout Text Mobem IME
Which one should I change? Or do I creat a new entry? Thanks for your help!
--------------------
Found put that I should change e0010409 from eT9ime.dll to compime. Problem is that I can;t find this file on my elf.... continuing to look
Ok, what I want to do is customize the way the keyboard menu looks - I want to remove some of the entries, and move some of the other inputs on the main menu for example - I'd like to delete Phone Keypad, compact QWERTY and move RESCO 6.0 entries to main.
I looked for an answer and couldnt find one. I tried to delete Touch Input reg entry, but had to do hard reset... None known by me way helped me assign different keybord as default - tried sipchange and sktools...
Does anyone have a useful idea???
Hi guys, I'm looking forward to change the SIP input method without going into Settings....
When I tap&hold the SIP icon (for example in the Message application), I'm prompted with the usual list of available SIPs, but that list shows only the "TouchInput" entry and not the "abc" keyboard entry I'm looking for.
How can I do that?
I also tried to set the registry entry HKLM/Software/HTC/ezsip/BioToShowMenu to 1 (+softreset) but nothing has changed.
Please help!
Thanks !!
Too bad no one replied.
Solved!
Solved!
I found a solution.
You need to set the registry key HKLM\Software\HTC\ezsip\currentSIP with the following values:
ABC keyboard: 2560
QWERTY full keyboard: 3328
QWERTY short keyboard: 2816
Bye