Hi.
I have just installed the phone enabled rom. Everything is fine, but it is an english version. Actually I managed to switch everything from english to german EXCEPT the hardware keyboard. I have figured out the following keys in the registry:
HKCU\ControlPanel\Keybd (this is already known and does not seem to have any effect)
HKLM\System\CurrentControlSet\Control\Keyboard Layout (this seems to activate one of the defined layouts in the 'Layout'-key)
HKLM\System\CurrentControlSet\Control\Layouts
Could anyone, who has a german keyboard layout running, check what his/her entries in these three keys are?
If anyone has another solution for this issue, I would be happy to hear from you.
Thanks alot.
Don't know wether this is the solution, but there are lots of keyboard layouts listed in:
HKLM/System/CurrentControlSet/Control/Keyboard Layouts
The German Layout has the key number 00000407.
Maybe you only need to enter that number as value in:
HKU/Default/Keyboard Layout/Preload
Good luck
retir0
Hi
Thanks for your reply. The country code for German is known, I have tried that, but it caused some major problems including not working keyboards (not even the virtual keyboard). Only transcriber was still working.
That is why I thought the registry keys
HKLM\System\CurrentControlSet\Control\Keyboard Layout
HKLM\System\CurrentControlSet\Control\Layouts
would have more effect.
If you look into the "layouts" you will find "00000409" which defines the US keyboard layout. There you will find a "Layout File" that is called "KbdNopALL.DLL" and another value called "Layout Text" containing the value "US". I was wandering if changing any of these keys would enable the QWERTZ layout of the keyboard. So if anyone that uses a QWERTZ Layout could check what settings there are in these keys (e.g. "Layout File" is the same, but "Layout Text" is "DE" or "GER"). Does anyone know anything about the "KbdNopAll.DLL"?
Looking into "00000409" I find the "Layout File" 'KBDUS.DLL' and the "Layout Text" 'US'.
By contrast in "00000407" the values are 'KBDGR.DLL' and 'German'.
I've scanned the whole registry but didn't find any KbdNopAll.dll-file on my German version Shift.
Hope I could help a bit.
retir0
hmm, maybe someone should make a Keyb.cab or REG file, that switch automaticly the right Language codes into registry.
I remember, that this issue comes up all new releases of a WWE ROM, I think there is the solution in some older posts ;-)
Anybody knows how to make a *.cab file or a Reg file for pocket PC´s?
If I know that, I can make a "batch" file for easy changing to german Keyboard layout ;-)
got it
i finally got it.
i had a false entry in
HKLM/hardware/devicemap/keybd/CurLang
the value 407 was entered in Decimal which results in a wrong Hexadecimal value. Now I have entered 407 as a hex value which equals 1031 in decimal. now the layout is correct.
damn complicated that is....
thanks for your help everybody
retir0 said:
Looking into "00000409" I find the "Layout File" 'KBDUS.DLL' and the "Layout Text" 'US'.
By contrast in "00000407" the values are 'KBDGR.DLL' and 'German'.
I've scanned the whole registry but didn't find any KbdNopAll.dll-file on my German version Shift.
Hope I could help a bit.
retir0
Click to expand...
Click to collapse
I've got the same problem with my German Treo 750. Hardware keyboard swaps z and y. I've changed all registry entries, but what I need is a kbdgr.dll to change the contents of my new created 00000407 to Layout File KBDGR.DLL and the Layout Text to German.
Has anyone got an idea where I could get this kbdgr.dll for WM 6.0?
I googled my fingertips bleeding, but only found the dll for xp - and I'm sure that this wouldn't work with my Treo.
Regards and thanks,
Reiner
Is there really nobody with a German Treo 750 to help me?
Regards,
Reiner
Related
Hi,
In the office I have a qtek 9000 spanish version (spanish keyboard). I have upgraded to O2 english rom. Everything is fine but the keyboard. Some specials keys (colon, semicolon, etc) doesnt match keyboard because the rom "thinks" my keyboard is an "english keyboard". Is there any way to change it? maybe remapping the scan codes? may be applying a pach)?
Thanks
Was just looking into this...
I was just checking the other forums on this and came across some interesting posts in the wizard section on remmapping keyboard by way of a reg edit. Here is the data pertaining to the wizard. You can probably do the same with the Universal. CREDIT GOES TO OAINOT for this.
Now we need a small registry hack.
1. Use a registry editor like total commander.
2. Go to \HKCU(HK Current User)\ControlPanel\Keybd\Locale.
3. Change the value of the key "Locale" from "0809" to "0407". "0407" is the locale ID for Standard German. You can find other Locale ID suitable for you at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx.
4. Do a soft reset and enjoy. All the keys and symbols have fixed right.
Try this.
I found this info by doing a forum search for "QWERTZ" (the german keyboard layout).
Good Luck and let me know how it goes.
Cyb
Also check out AE Keyboard Mapping Software
Thanks, I have solved it in other way.
I ve changed the key HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty from 66569 (english) to 68617 (spanish) and works fine
hello
i have qwertz keyboard
and Italian rom
how i must change the key?
HKEY_LOCAL_MACHINE\SOFTWARE\OEM
why I don't see qwertz key in the registry?
if
I must create new one?
Hi Forum,
I installed the japanese IME as it was discribed at another forum (http://www.firstloox.org/forums/showthread.php?s=c973622a044a5a4a87c1f6099f097d74&t=4510), and it seems to work almost perfect on my qtek 9100, new German ROM installed. Only problem: the program changes the keyboard settings, means that I can't use the symbol- key (function+space) any more, so ä, ü, ö, ', ... are gone. I already tried AEKMap, when downloading the German keyboard file, it doesn't show up within the program. I inserted a new string called "Locale" to the registry-settings at HKCU/ControlPanel/Keybd etc., as it was posted here http://forum.xda-developers.com/viewtopic.php?t=44489
-nothing helped. Do I miss something?? I will go to Japan next Saturday and desperately neeeeeed a Japanese IME- but also my German keyboard layout!
Greetings from Berlin,
Andreas
Hi again, some more information: It seems that the keyboard is working, the only thing which doesn't work is the "symbol"-key (the "blue dot + space"-combination). Does anybody know if there's something hidden in the registry how I can re-map it and get it back to work??
Thanks,
Andreas
There's a text file you'd need. You can easily create this yourself, though it might help to just find it somewhere.
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
A pre-made on is in:
http://forum.xda-developers.com/viewtopic.php?t=43680&highlight=french+german
Hi ZeBoxx,
doesn't work for me, unfortunately. As I said, the layout of the keyboard is ok, only thing is the missing function of the "symbol"-key. I played around with different keyboard settings, they all work ok BUT this symbol think doesn't. Any other ideas??
Andreas
Did you specifically read this last part?
Symbols List - Changing the symbols when using the Sym hardware key along with a regular key (select devices)
Change the Symbols List
To change the Symbols List simply find the file "\Windows\sym.txt", and edit + save this file. The structure of the file is pretty straight-forward:
On each line, type the regular letter or number for the key as it is when normally pressed. Follow that letter up with the alternative characters ('Symbols') in the order you wish for them to appear. For example, from a WWE ROM:
eèéêë
This will replace the letter 'e' when using the Sym key with 'è', then when striking the Sym key again with 'é', then 'ê', and so on.
Click to expand...
Click to collapse
Sure, but as I said, it's not the problem that this text file is wrong or anything- it seems that the symbol key doesn't work at all. No matter how many times I use this combination (blue dot + space), nothing changes, no effect on any letter/symbol/etc.
In the meanwhile I did a hard reset, installed all the apps again, same issue. I uninstalled the japanese IME, back to normal. I'm pretty sure that this prog changes some registry setting I need for the use of the symbol-key- I searched the whole registry, but since I'm not familiar at all with this I didn't find anything helpful...
Andreas
got exactly the same problem. Searching Internet and all but I dont find any solution: there must be a registry entry enabeling it but where...
Yep, got the same problem. Finding it hard to search for relevant problems to do with this. Any help would be apprieciated.
I bought an almost new O2 XDA mini S with iMate software (why is iMate's SW so popular?) and as its keyboard is mapped as a German one it was all fine until I haven't reinstalled the system yesterday. While getting to know the device better I even came across an option to change keyb's layout (then I saw that the signs on the buttons don't correspont to what I type, so I left it set to German).
As I said, after the format English became the default layout and it's very hard to type now.
Where/how can I set it to German layout. I'm not sure if I had installed something that allowed me to do that prior to reinstallation.
Thanks in advance
u will have to do a small registry tweak as follows :
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0407 German
u will need a software to access the registry like resco explorer or total commander
or u can read this :
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=easy+tweaking
Thanks tunx. I think that was what I did when changed to English for the first time
Hi, I have the german keyboard too and I was wondering if would it be possible to switch the z and w keys like on an english keyboard?
read the above link
or do this yourself :
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
0409 English US
0407 German
Anybody knows what is value for Polish keyboard layout?
oleyek said:
Anybody knows what is value for Polish keyboard layout?
Click to expand...
Click to collapse
It's listed here http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
Tnx, I wasn't sure where exactly to put that code
Hi guyz
Is there anyone out there know how to fix my keyboard problem? Please Help Me. I bought my O2 Trion From HK and they have reflash the firmware with HTC firmware which is meant for QWERTY keyboard layout but my keyboard layout is QWERTZ. It works fine when i bought it and now after i hard reset it my "Z" button become "Y" and my "Y' button become "Z".
thanks guyz for helping me
Saint said:
Hi guyz
Is there anyone out there know how to fix my keyboard problem? Please Help Me. I bought my O2 Trion From HK and they have reflash the firmware with HTC firmware which is meant for QWERTY keyboard layout but my keyboard layout is QWERTZ. It works fine when i bought it and now after i hard reset it my "Z" button become "Y" and my "Y' button become "Z".
thanks guyz for helping me
Click to expand...
Click to collapse
Have you tried registry changes?
UK/US layout (QWERTY):
HKCU\ControlPanel\Keybd\Locale = 1033 (DWORD decimal)
German layout (QWERTZ):
HKCU\ControlPanel\Keybd\Locale = 1031 (DWORD decimal)
French layout (AZERTY):
HKCU\ControlPanel\Keybd\Locale = 1036 (DWORD decimal)
EDIT: WORKS FOR MANY WM5 DEVICES BUT NOT HERMES (SEE FOLLOWING POSTS)
Mike
Hi Mike
Thanks for your help but i am new in this area can u please tell me how to change the registry please.
thanks once again for your help
i really appreciate it
Saint said:
Hi Mike
Thanks for your help but i am new in this area can u please tell me how to change the registry please.
thanks once again for your help
i really appreciate it
Click to expand...
Click to collapse
Well you need a registry editor this one is free PHM:
http://pocketland.de/util/getdownload.php?regedit.Mrln_ARM.cab&id=22357
Download to your desktop (do not open it) and then move it to your Device using active sync. In active sync use the explore tab to open up your device. If you have a storage card go there and drag and drop the file onto storage card. If not put it in device main memory.
That done disconnect from PC and use file explorer to hunt for the file and tap it to run it. If offered a choice choose install to Storage Card. If not main memory. Once installed go to your programmes and open PHM.
Navigate using PHM to the keys shown in my first post and change the numbers accordingly.
Post again with problems.
PS changing registry has potential risks. There is a chance that if you d something wrong you will need to hard reset again. Are you willing to take the chance?
PPS You may need to soft reset. Do not just poke stylus in hole. LONG press on off switch until a message pops up. Say yes. Device will reset.
Mike
Hi Mike
sorry to border you again i have manage to install and iin my device i can only find \HKCU\ControlPanel\Keybd only and inside it it has got InitialDelay and Repeat Rate
i cant find \HKCU\ControlPanel\Keybd\locale
however i can find \HKCU\keyboard layout\preload\1 its value is e0010409
is that the one?
thanks for your help
Hang on while I check mine!
Mike
just go ahead and take your time hopefully u can help me
thanks
OK, it seems the info I gave above re keys to change does not apply to Hermes specifically. However there are registry changes you can make. The following information is taken from the "wiki" link on brown bar top of page:
Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
The suitable value for German Hermes keyboard is 20407 (132103 in decimal). =qwertz
The suitable value for Spanish Hermes keyboard is 2040a (132106 in decimal).
Probably Hermes use 20+country ID (409=WWE, 407=German, 404=Trad. Chinese, etc...) format for keyboard layout value.
The above settings does not work with the latest Hermes firmware, the following is required.
[HKEY_CURRENT_USER\keyboard layout\Preload]"Default"="e0010414"[HKEY_CURRENT_USER\keyboard layout\Preload\1]"Default"="e0010414"[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]"Layout"="132116"
The last setting is the same as in the above solutionThese settings are for Norwegian keyboard, country code : 0414Tested on fw. 1.31.502.1
Note: For those with a Chinese Keyboard Layout, Changing the Preload will affect Outlook, particularly when composing e-mails. Typing e-mail addresses will not auto-load from your address book for some reason. This can be fixed but deleting the [HKEY_CURRENT_USER\keyboard layout\Preload] folder and all its contents. As of now, no known side effects from deleting the folder has been found.
A list of other layouts:
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
Note2: For those using a Japanese layout (i.e. Softbank X01HT) with newer ROMs should use 30411 Hex. (197649 Dec) as value for keyboard layout in order to get ',' and '.' properly mapped:
[HKEY_CURRENT_USER\keyboard layout\Preload]"Default"="e0030411"[HKEY_CURRENT_USER\keyboard layout\Preload\1]"Default"="e0030411"[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]"Layout"="197649" Hope rhat all makes sense
Mike
thanks mike for your help. even though it is not working but i appreciate your effort for helping me.
thanks mate you the champ
Saint said:
thanks mike for your help. even though it is not working but i appreciate your effort for helping me.
thanks mate you the champ
Click to expand...
Click to collapse
Hi Saint. Sorry it's not working but perhaps it's worth another go - and don't forget do not do standard soft reset after changes use the long press on on/off button. The reason I say this is that there are folks out there who have said it does work (though they were going Qwertz to qwerty, but still, - see here:
http://forum.xda-developers.com/showthread.php?t=273332
Good luck
Mike
thanks alot mike it works now. it is such a wonderful that you can help me with this. thanks once again
Pleased it's working
Happy days!
Cheers
Mike
Qwertz in WM6
Though our company IT expert went through the regedit settings, in WM6 this fix seems not to work.
A cab file would be the solution (without German editing or word suggestion)
Anybody out there with a QWERTZ hardware input running WM6?
Would be very very very happy to get help
When you people make these changes to the registry it is advisable to put the phone to sleep for at least 1 minute to make sure the registry values get saved...
shogunmark said:
When you people make these changes to the registry it is advisable to put the phone to sleep for at least 1 minute to make sure the registry values get saved...
Click to expand...
Click to collapse
Great, My Trion may sleep even 24 hours if only the regedit settings would work...
They refer to WM 5 settings and not WM6. As such, no values can be set at the correct three.
Damn. I need that cab file badly...
i dont know what can i say
i really thank you so so so so much "mikechannon". i dont need aekmap anymore.
friends as mikechannon said;
Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
The suitable value for German Hermes keyboard is 20407 (132103 in decimal). =qwertz
The suitable value for Spanish Hermes keyboard is 2040a (132106 in decimal).
Probably Hermes use 20+country ID (409=WWE, 407=German, 404=Trad. Chinese, etc...) format for keyboard layout value.
it really works perfectly
thanks thanks thanks
My O2 XDA Mini S has a QWERTZ keyboard layout, and the WM software uses QWERTY layout, thats why whwn I type using the keyboard, Ive always misused the Y with the Z, and vise versa. Also the symbols are all rumnbled into places. Is there a way I can use the QWETZ layout using the english WM, because I believe that the QWERTZ layout maybe compatible to WM German version. (I dont understant german, so I need the english version). Please help, because I dont think I can do anything with the physical layout of my keyboard so I just need a modification with the software.
you need to edit the keyboard language in the registry. the default is 0409 for english. im not sure what the german one is, but check the wiki, i'm sure you can find out some more info in there.
look at the next post, i figured it out
-Nstefanelli-
Code:
HKCU\ControlPanel\Keybd\Locale = 0407
You have to edit the registry, you need to change it from 0409 to the above.
Good luck.
-Nstefanelli-
Hi. I'm not able to safe any keys in the registry.
Done and rebooted. Edit was gone.
Maybe issue with my Registry editor?
I use the german keyboard as well. The easiest solution to that is the Registry wizard
ftp://ftp.xda-developers.com/Upload/cabs/RegistryWizard_PPC.ARMV4.cab
There you just change the keyboard to German and done with it.
As to the other, you should always wait a couple of minutes before reboot, looks like it actually take some time for the system to write it back into the registry.
In addition, it's moire than just the one key to change.
Bye
In here any simular cab like this, but for Czech qwertz keyboard?
Thanx in advance!
roland valentini said:
I use the german keyboard as well. The easiest solution to that is the Registry wizard
ftp://ftp.xda-developers.com/Upload/cabs/RegistryWizard_PPC.ARMV4.cab
There you just change the keyboard to German and done with it.
As to the other, you should always wait a couple of minutes before reboot, looks like it actually take some time for the system to write it back into the registry.
In addition, it's moire than just the one key to change.
Bye
Click to expand...
Click to collapse
Thanks.
But this location is not working for me
I have the same problem again....
This fix worked for me with wm5 but I just upgraded to wm6 and kb went to qwerty mode (the hardware is a qwertz).
I tried adding the above-mentioned key to the recommended location, and it did not work (that key does not initially exist on wm6).
I also found two keys: \\\registry\hkcu\keyboard layout\preload\default, and \\\registry\hkcu\keyboard layout\preload\1\default, and both of them had e0010409 as the value. I changed them both to e0010407 and tried coldboot after each (one and then both) and it still doesnt thinks its a qwerty keyboard.
Any ideas guys?
Thanks -- AshayinFLA