Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
frustin said:
Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
Click to expand...
Click to collapse
As of today I have the exact same issue ! I installed sdkcerts.cab and FInixNOverBatteryIconsOnly.cab but uninstalled and the issue is still there
have you had any luck in finding out what's causing it, not overly enthusiatic about doing a hard reset which will probably be mentioned ?
I have the same issue, after installing some apps on my new Blackstone the Volume-settings feature was gone...
Any Ideas?
regards+thx
ps: please don't tell me to hard reset ;-)
I also have sdkcerts.cab and FInixNOverBatteryIconsOnly.cab installed (and many other applications), but my volume buttons work as expected. Maybe it has something to do with device lock?
Regards!
MHoefler said:
Maybe it has something to do with device lock?
Click to expand...
Click to collapse
MHoefler, thank you, nice hint!
After uninstalling S2U2 the volume buttons are working!
I am using S2U2 1.35, will looking for a new build...
regards
s2u2
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
needacloud said:
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
Click to expand...
Click to collapse
yes, just re-installed it.. same issue.. and then with setting "Volume Control = ON" it is working.
thank you
well spotted MHoefler !! all sorted now after enabling the volume in S2U, happy again
Yes, work with volume control "on" setting but, the volume control at call is locked!!
Any solution for up or down the volume at calls (with S2U2 installed)?
Regards.
You may try a hard reset.
Black Antitoon said:
You may try a hard reset.
Click to expand...
Click to collapse
Yes Black, I know that hardreset works but I wanna use S2U2.
It is clearly a bug in s2u2 and until it gets fixed there is not satisfactory solution unfortunately.
That seems. Just wait for new release.
sgbmad said:
Any solution for up or down the volume at calls (with S2U2 installed)?
Click to expand...
Click to collapse
I found the solution at the diamond-forum. You have to set "Don´t use the keyboard hook" at the S2U2-Settings to "ON" and the S2U2-Volume-Control to "OFF" -then all works perfect!!!
Thanks nick007, I'll try it.
EDIT: Yes, it works! And the hardware buttons does not pick up/ignore the calls.
thank you, but for me that doesn't work correctly: With these settings i can control the system and ring volume during a call properly, but i can't change the actual 'in-call-volume' (which means the volume how loud i can hear the other party talk)... can anyone check this?
regards jan
Yes hausen, I can change "in-call-volume".
Before you uninstall S2U2...
I had this issue as well, and suspected it had something to do with having the volume buttons captured in Mortplayer and Coreplayer. Glad to see they weren't the issue so i can keep controlling them the way i like
But be careful when getting rid of S2U2!
I had S2U2 installed as well and uninstalled it without setting the volume control, and the volume buttons remained broken! I had to install S2U2 again, activate its volume control and THEN uninstall it to get volume control back! So if you want to uninstall, be sure to fix the volume controls beforehand.
Well, it seems like i really messed it up.... My volume buttons are still broken
I get the same symptoms as described earlier (volume buttons call up the volume screen, pressing a second time does not change volume but closes the volume screen instead), but in addition i noticed pressing the volume buttons while on the volume screen actually generates up arrow/down arrow keys! You can see this on many of the manilla screens where suddenly items become selected, but in other programs as well. The volume key press that calls up the volume screen doesn't seem to generate an arrow key, or it doesn't get sent to the current program.
So a couple of things i did that could have broken it:
I remapped the volume keys in Mortplayer.
I remapped the volume keys in Coreplayer.
I had S2U2 installed.
I tried to "fix" things with AEBplus.
The symptoms are always there, even after a soft reset without having run either Mortplayer or Coreplayer. I think the system's response to the volume key has changed, and the volume keys still send volume commands because explicitly remapping the keys to volume keys with AEBplus doesn't change anything. I even tried remapping another key to generate volume commands, but that just seems to keep calling up the volume screen, even if it's already active!
So i'll be struggling with this for a while it seems.... but if anyone has any suggestions or insights.....?
I have the same problem ... DOWN volume key is not working.
The annoying thing is that if I try to soft-reset the device it works but I get into bootloader. I have to press the UP volume key and keep it pressed until HTC logo appears, or else I still get into bootloader. So, I don't know what to say, but for me at leat, it might be a hardware problem.
Another thing is that when I go to hard-reset screen, none of the buttons work. I mean is I try to press volume UP or DOWN, nothing happens. Today I succeded in hard-reseting the device but the problem still persists.
I hate this thing and I hope that somehow this problem can be solved. Good luck to everyone.
PS: I will try to get official rom, radio, and SPL on my diamond, and maybe that will clear the problem because it is annoying at least.
Hope you guys have better luck then me.
I have got T-mobile wing for few weeks and now the volume feature keeps turning down on me and that little volume window pops up. It interferes with my call and will not let me text because of it. HELP PLEASE!!!!
Even I had done Hard Reset more than once but it comes back again and again after a day or two.
Can anybody suggest any solution other than just hard reset? As i have done hard reset various times....
have you flashed a custom rom if so try reflashing it that miht do the trick, if your using the rom that came with the phone it might be a issue with your phone might have to return it and get a new one
I am using the standard rom that came with my phone, no custom roms.
Your volume button is probably slightly stuck.
But I can use the volume button to try to turn up the volume .. sometime I win and sometimes that malicious thing wins turning down the volume..
Somebody knows about how to disable that little volume popup or HOW TO DEACTIVATE THE VOLUME SLIDER in T-Mobile wing?
rehan81 said:
But I can use the volume button to try to turn up the volume .. sometime I win and sometimes that malicious thing wins turning down the volume..
Somebody knows about how to disable that little volume popup or HOW TO DEACTIVATE THE VOLUME SLIDER in T-Mobile wing?
Click to expand...
Click to collapse
No easy way I can think of other than butchering the volume control altogether (by killing the dll's responsible.)
Has anyone else experienced the failure of the volume up/down switch whilst using the hTC music player and headset?
Having launched a playlist and attached the headphones, you can't turn the volume up or down using the volume buttons on the phone once the phone has entered standby/locked mode. But you can mute the volume by pressing and holding the volume down button, the un-mute by pressing volume up.
Even more annoying is the fact that if you press volume up/down BEFORE the phone goes into standby/locked (so that the volume slider is displayed on the phone screen), the volume up and down DOES work once the phone is in standby mode.
Must be a fix for hTC to release on this one. Its very annoying not to be able to control volume using the phone buttons without having to make sure the volume slider is displayed on the phone first.
Yes, I have noticed this as well, I have the same problem.
It is related to the separate settings for 'system' and 'ring' volume. If you revert back to the single volume setting, the buttons will work in standby.
HTC first told me to do a hard-reset (I did, doesn't help), then asked me to send in the device for repairs. IMO this is a software issue, so sending it in for repairs will do little if nothing to get it fixed. I've yet to receive a reply on that.
Appelsap said:
It is related to the separate settings for 'system' and 'ring' volume. If you revert back to the single volume setting, the buttons will work in standby.
Click to expand...
Click to collapse
Ah right, good to know that at least, thanks. But as you say, its surely easily fix-able with a software patch.
Is there any setting in Touch2 where in we can click on the volume icon & change the volume without using the volume key
For touch2 we can only change the volume using the volume key, i would like to change the volume using the volume icon just like in WinMo 6, 6.1
I don't get this at all. . . using the buttons on the side of the phone is the easiest way to adjust volume, period.
If the 15 levels of selectable volume via volume keys dont meet the accurate reqirements (i'm quite partial to having no more nor less than 73% myself),
you can always slide over to Settings > Sounds
you can then adjust volume from 0% to 100% for the rings & system seperately.
Hi Weznezz,
I am happy using the volume keys, but i would also like to know if there is any possibility of using the volume icon, to change the volume from the screen.
In previous WM builts you could do that indeed which I also liked......for some reason they took it away......
Will search and when I find something report back....
Hi Frank,
Thank you very much for understanding my request. Will be waiting for your response.
Regards,
Frank is a good guy, and i mean it
Hi every1,
Recently i have faced a lot of problems after my hd2 falled and screen braked - including the fact that mobile phone repair "fixed" my volume control buttons so good that after 1 week "volume -" button isn't working.
Atleast volume+ is working, so no problems with magldr and software rewriting will be faced.
So i have a q: can i do remapping of my hardware keys? I would like that the volume- and "search" button on hd2 wp7 would change their places, so i would be able to turn volume down when required(30/30 is very very loud), also would be nice to found out how to change the current system volume via registry editor(i think so it's possible). Also mb it's possible instead of doing things that i mentioned before - creating and easy app which would have 2 buttons Volume+ and Volume- so i could control whole system volume
So, i'm looking forward to hear from you soon guys and i hope so i would be able to enjoy music over headphones again,
Paul