well my wing has never had any serious problems but about three days ago when i was sending an sms and pressed the W button the volume goes all the way doen to silent but now it goes down to silent without pressing anything at all and prevents me doing anything ive reset the phone to factory mode anyone have any ideas what i can do?
try using anoth rom if anything call tmobile
i dont think changing the rom is gonna fix it and tmobile wants me to pay for another phone because of my warranty which isnt up with them but up with assurion
Does this only happen once or all the time? Mine seems to be stuck scrolling down until a button is pushed - like the down button is being held down each time it powers on.
Edit - It seems that it is the volume button that is causing the issue for me. It seems the up works, but pressing it down tends to do nothing and each time the phone is reset or turned back on the volume will go down and with the sound turned on for each key press you heard it beeping constantly.
Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
frustin said:
Anyone else get these syptoms?:
the volume control on the side, when I press the up or down once, it goes to the volume slider screen. One would expect that pressing the volume up, to move it up and then down, to move the volume down right?
Well on mine; if you press the volume button once, it goes to the volume screen ok, but if you press it again, it takes you back to the previous screen without altering the volume. The same happens for both up and down buttons.
Click to expand...
Click to collapse
As of today I have the exact same issue ! I installed sdkcerts.cab and FInixNOverBatteryIconsOnly.cab but uninstalled and the issue is still there
have you had any luck in finding out what's causing it, not overly enthusiatic about doing a hard reset which will probably be mentioned ?
I have the same issue, after installing some apps on my new Blackstone the Volume-settings feature was gone...
Any Ideas?
regards+thx
ps: please don't tell me to hard reset ;-)
I also have sdkcerts.cab and FInixNOverBatteryIconsOnly.cab installed (and many other applications), but my volume buttons work as expected. Maybe it has something to do with device lock?
Regards!
MHoefler said:
Maybe it has something to do with device lock?
Click to expand...
Click to collapse
MHoefler, thank you, nice hint!
After uninstalling S2U2 the volume buttons are working!
I am using S2U2 1.35, will looking for a new build...
regards
s2u2
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
needacloud said:
i had the same issue with s2u2. after enabling the volume button within the s2u2 settings it works fine again.
Click to expand...
Click to collapse
yes, just re-installed it.. same issue.. and then with setting "Volume Control = ON" it is working.
thank you
well spotted MHoefler !! all sorted now after enabling the volume in S2U, happy again
Yes, work with volume control "on" setting but, the volume control at call is locked!!
Any solution for up or down the volume at calls (with S2U2 installed)?
Regards.
You may try a hard reset.
Black Antitoon said:
You may try a hard reset.
Click to expand...
Click to collapse
Yes Black, I know that hardreset works but I wanna use S2U2.
It is clearly a bug in s2u2 and until it gets fixed there is not satisfactory solution unfortunately.
That seems. Just wait for new release.
sgbmad said:
Any solution for up or down the volume at calls (with S2U2 installed)?
Click to expand...
Click to collapse
I found the solution at the diamond-forum. You have to set "Don´t use the keyboard hook" at the S2U2-Settings to "ON" and the S2U2-Volume-Control to "OFF" -then all works perfect!!!
Thanks nick007, I'll try it.
EDIT: Yes, it works! And the hardware buttons does not pick up/ignore the calls.
thank you, but for me that doesn't work correctly: With these settings i can control the system and ring volume during a call properly, but i can't change the actual 'in-call-volume' (which means the volume how loud i can hear the other party talk)... can anyone check this?
regards jan
Yes hausen, I can change "in-call-volume".
Before you uninstall S2U2...
I had this issue as well, and suspected it had something to do with having the volume buttons captured in Mortplayer and Coreplayer. Glad to see they weren't the issue so i can keep controlling them the way i like
But be careful when getting rid of S2U2!
I had S2U2 installed as well and uninstalled it without setting the volume control, and the volume buttons remained broken! I had to install S2U2 again, activate its volume control and THEN uninstall it to get volume control back! So if you want to uninstall, be sure to fix the volume controls beforehand.
Well, it seems like i really messed it up.... My volume buttons are still broken
I get the same symptoms as described earlier (volume buttons call up the volume screen, pressing a second time does not change volume but closes the volume screen instead), but in addition i noticed pressing the volume buttons while on the volume screen actually generates up arrow/down arrow keys! You can see this on many of the manilla screens where suddenly items become selected, but in other programs as well. The volume key press that calls up the volume screen doesn't seem to generate an arrow key, or it doesn't get sent to the current program.
So a couple of things i did that could have broken it:
I remapped the volume keys in Mortplayer.
I remapped the volume keys in Coreplayer.
I had S2U2 installed.
I tried to "fix" things with AEBplus.
The symptoms are always there, even after a soft reset without having run either Mortplayer or Coreplayer. I think the system's response to the volume key has changed, and the volume keys still send volume commands because explicitly remapping the keys to volume keys with AEBplus doesn't change anything. I even tried remapping another key to generate volume commands, but that just seems to keep calling up the volume screen, even if it's already active!
So i'll be struggling with this for a while it seems.... but if anyone has any suggestions or insights.....?
I have the same problem ... DOWN volume key is not working.
The annoying thing is that if I try to soft-reset the device it works but I get into bootloader. I have to press the UP volume key and keep it pressed until HTC logo appears, or else I still get into bootloader. So, I don't know what to say, but for me at leat, it might be a hardware problem.
Another thing is that when I go to hard-reset screen, none of the buttons work. I mean is I try to press volume UP or DOWN, nothing happens. Today I succeded in hard-reseting the device but the problem still persists.
I hate this thing and I hope that somehow this problem can be solved. Good luck to everyone.
PS: I will try to get official rom, radio, and SPL on my diamond, and maybe that will clear the problem because it is annoying at least.
Hope you guys have better luck then me.
Hello.
I have got salt on my HTC Touch HD, so the volume up button is from time to time "pressing itself". When it's not, the button don't work if I try to press it, but then suddenly it starts to increase the volume, even though I don't press it.
Now I would like to just disable it, since the physical button don't work anyway, so I can't use it anyway, it just irritates me.
So, any suggestions?
Thanks for ANY help I can get...
HD2 is a masterpiece but as with all masterpieces, there are some setbacks if one of the things do not work.
I dropped my HD2 and the volume key (hard key on the left) stopped working. That means....
THERE IS NO WAY IN HELL, I CAN CHANGE THE IN-CALL VOLUME!!!
The system volume and ringtone has nothing to do with it. Even if the system volume is reduced, the in-call volume (voice of the other person) remains unchanged.
Is there any way i can have a soft button or soft key or any alternate to incall volume hard button?
I am in a serious mess, so help will be REALLLLLLLYYYYYY APPPRECIATED
You can download and install Audio Manager (Free at Market) . It has a feature that allows you to change in-call volume without the need to be in a real call, unfortunately though I don't think you can change it while in call
i don't have an answer for the original question, but i would just like to advise the OP that volume keys not working is really a messed up situation because you will also be UNABLE to access bootloader or the hard reset option.
jumping to bootloader and hard reset CAN be done by booting into WinMo. there is an icon in the start menu->settings called "Clear Data" that will do hard reset. and there is a small program available somewhere (don't remember the name) that will reboot into the bootloader.
the interesting question is, what do you do if your WinMo stops being able to boot the day you need the hard reset or bootloader?
The irony is my call volume is at maximum.
Is there any way I mean ANY WAY i can reduce the call volume without the volume rocker buttons?
I mean any registry tweaks or something?
I tried the HKCU --- control panel----sounds profiles---incall volume tweak but that did not work.
I am stuck...I really need help
yahya.hamid said:
The irony is my call volume is at maximum.
Is there any way I mean ANY WAY i can reduce the call volume without the volume rocker buttons?
I mean any registry tweaks or something?
I tried the HKCU --- control panel----sounds profiles---incall volume tweak but that did not work.
I am stuck...I really need help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=6119182&postcount=1
Get it repaired... bro nothing 4 the incall volum
E...
Sent from my HTC HD2 using XDA App
Hello all,
I have recently done an upgrade to WM6.5 (Energy ROM) and now, when listening to music in PocketMusic 5.3.5, screen turns on by pressing the volume buttons to change volume, and the "ding" sound is played as when changing the volume manually. Also the Manila screen for changing volume is displayed and I have to cancel it. In stock WM6.1 it just changed the volume and screen stayed off. I have already tried playing with PocketMusic settings (like using system volume enabled/disabled, or key compatibility mode) and nothing helped.
I don't know if this is an issue with WM6.5 itself or with the particular ROM so I posted my question here (hopefully ok).
I liked to have the phone in my pocket and change volume just using my hand without taking the phone out. Well, those are the small annoyances that get me, but maybe someone has an idea or fix here, please? I already searched (on google and on these forums as well) but that didn't yield any results...
Mek7 said:
Hello all,
I have recently done an upgrade to WM6.5 (Energy ROM) and now, when listening to music in PocketMusic 5.3.5, screen turns on by pressing the volume buttons to change volume, and the "ding" sound is played as when changing the volume manually. Also the Manila screen for changing volume is displayed and I have to cancel it. In stock WM6.1 it just changed the volume and screen stayed off. I have already tried playing with PocketMusic settings (like using system volume enabled/disabled, or key compatibility mode) and nothing helped.
I don't know if this is an issue with WM6.5 itself or with the particular ROM so I posted my question here (hopefully ok).
I liked to have the phone in my pocket and change volume just using my hand without taking the phone out. Well, those are the small annoyances that get me, but maybe someone has an idea or fix here, please? I already searched (on google and on these forums as well) but that didn't yield any results...
Click to expand...
Click to collapse
you should try to re-mapping volume buttons with AEB Plus
Thank you for your reply.
I have installed the app but I am afraid it cannot do what I want.
I don't want to remap volume keys permanently - I still want to control the volume as it is now - but only when the screen is on. When screen is off, volume should be changed "on background" - without the ding sound and without turning the screen on. Hopefully I explained it right. Any more suggestions, please?