Related
HELP ME!!!
I had, aku2.3 and I tied to update with this ROM,
I did everything like in guide:
1 hard reset
2 Active sync with out align screen
3 Run UPGRADE_ROM.bat and wait until finish sound
4 hard reset again
...and all i have is blue screen:
1 Pl 1.00
SPL 2.13.0000
GSM 02.30.21
OS 3.0.0.0
WM doesn't start. HELP ME I can not work appropriately without my PPC ...I will be grateful for your help
dooogie
Hi Profs,
there are some problems with a Artemis Update SPL (USPL) v.01. I've found this problem is several topic but there was no solution for it.
#1:
http://forum.xda-developers.com/showpost.php?p=1739577&postcount=413
#2:
http://forum.xda-developers.com/show...44#post1745844
#3
http://forum.xda-developers.com/showpost.php?p=1713596&postcount=1
The problem:
use USPL to get rid of the CID....count goes up to 100% screen shows black with green text, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use win XP.
i even tried without memory card and phone card....and nothing seems to work.......
ipl 1.14.0001
spl 1.14.0000
gsm 02.07.90
os 1.14.0.0
Who has any clue...?
With other words:
I've just got back my P3300 from repair, they changed the main board. With the previous main board I was able to upgrade the device and I was using the B&B versions.
But with this new board I'm not able to upgade the SPL. When I try to upgade the device after and start the start_uspl .exe the 10...20... ....100 my device become an interresting "blue screen" status and only the reset help to get out from this status. If I start the RomUpdateUtility.exe after the upgrade I got the error message #270
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
ExtROM version: 3.12.405.102
This is not the solution for the problem. I've tried it:
Plug in USB cable. Hold voice recorder button and press reset button. Bootloader will appear (Three color stripes). Then you may flash up ROM. (This works only for RUU installation types, not for PDAmobiz modified installator) Original english HTC P3300 ROM you may download form here: http://wiki.xda-developers.com/index...temis_Upgrades ....
Please help us to solve this problem....
Probably the same problem
This should be the same:
Hello POF,
I was directed to this link by Rudegar because I want to change the french ROM to English ROM.
The relevant data of my PDA is:
The version of the ROM: 1.14.406.1 FRE
Date of ROM: 9/27/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ROM extension version: 1.14.406.101
I tried exactly the way you described in the USPL_manual and everything went well till I got to a stage where I was asked to click the update button which I did. After then there was a window which showed "updating from current version to version 9.99". I was confused at this point but clicked "continue" and after this stage I got an error message and there was no longer a connection bw my PDA and my computer.
Thanks,
Jonat
Reply With Quote
http://forum.xda-developers.com/showpost.php?p=1784337&postcount=430
Also the same
Problem "lost connection PDA-PC"
Hi,
first I would like to thank you for goooood job to many people here !
Back to my problem. I have HTC Artemis (T-Mobile MDA Compact III), OS WM6 T-Mobile Czech version.
I ran start_uspl.exe on my computer. The part in DOS based screen seems to finish everytime OK, but finally the connection with PC is lost. Therefore when the PDA Phone ROM Update Utility starts cheking version the error "lost connection with PC" appears . PDA stay in "black screen" mode and only hard reset start it again as usual.
Does anybody have the same problem? Any idea, how to solve it ?
Thanks
http://forum.xda-developers.com/showpost.php?p=1773030&postcount=426
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
lenocs said:
then pops to white. I need to do a soft reset to get it running again.
Click to expand...
Click to collapse
What im saying is when it pops to white, dont soft reset it, just start the upgrade.
Anthony2oo5 said:
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Click to expand...
Click to collapse
that what i also do When the screen goes white, don't restart. Just start your RUU
lenocs said:
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
Click to expand...
Click to collapse
Same situation as above. Depending on the Artemis, the screen might go white or black. Just don't freak out and keep on flashing the USPL. It WILL work and then reboot. Then you can flash the actual ROM you want.
Hello from an absolut newbie trying his first upgrade,
And I have just experienced the same problem than lenocs.
I have run start_uspl.exe, but when the screen is suposed to become white or dark, it becomes dark and the artemis is in fact totally off and connection is lost.
Anyway I supossed that it was because the scrren got black and I tried to run the update utility, but I´ve got an error (the terminal is disconnected or similar) and nothing happens.
I have had to soft reset the terminal and fortunatelly it seems that I still have my previous ROM and it seems that it works. But, do you know if there could be some "side effect" because the first step of start_uspl script?
Anyway I would like to move to WM6, so, any suggestion would be really appreciated.
Thank's a lot
When you restart, what is the USPL number?
Ooopppssss!
I didn't pay attention.
As I've said, I'm a newbie, so I was just woried because I thought I had "bricked" my new atemis.
How can I know now the USPL number?
Anyway I tried the star_uspl again (I'm a crazy newbie) and it failed. The artemis went off almost inmediately.
Thank you very much for your help
SpiggyTopes said:
When you restart, what is the USPL number?
Click to expand...
Click to collapse
solved ... at least for me
I think the problem is in SPL version 3.13 (or maybe anyone newer than 1.11).
Try different Artemis USPL - for me worked version from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
It's very confusional, because file sizes and also dates are the same as in unfunctional version, but this one worked.
Hope it'll help you as it helped to me.
Maybe this can help you
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Rocheau said:
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Click to expand...
Click to collapse
do u have ur card in the phone while updating
you are suppose to remove the card
Problem solved (for me)
Hi,
i had the same problem error 270, 3% and lost connection with Activesync.
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
any way to upgrade was wrong ->> error 270
My good way was:
1. Downgrade to WM5 - original shipped ROM 1.12.405.1(link found on Wiki pages)
2. Under WM5 run USPL to unlock CID (now without any errors)
3. Final STEP - Upgrade to new ROM Artemis Touch 3.01 (without any errors by upgrade)
))
Now my Artemis seems to be OK.
I ran USPL with storage card inside the device...
no problem
switch SD card back to 2GB or smaller before USPL
Hi,
for me USPL did not work with my SDHC 8GB card but then I switched back to my previous 2GB SD card and then it works.
Perhaps the SDHC driver blocks USPL in some way.
Cheers,
Markus
i have been trying for 3 months
once i have upgraded my artemis to wm 6.0 everything seemed to be OK for two days... then the screen started to go black when i restart... şi downgraded to 5.0 but nothing changed... when i remove battery for a while, my arte works... when i try to do anything with it, the screen slowly goes black as if it is broken... please DO HELP ME! i am going to go mad... i have a new iphone, ihave i kaiser as well... but i miss my artemis very much...
Hello:
I have the same problem and realized hundereds have too. I have been checking in all forums and no asolution to it
The issue that happens to me is that I used USPL for upgrading to WM6 and worked, but now for the Touchflo it does not. Tried with all USB ports, tried with different computers and no good news.
The USPL msdos screen indicates that there is no connection at all in all percentage levels, then it bocomes dark and the 260 error whne installing the rom.
please help us soon !!!
we are in trouble!!
Same Problem : Screen shut down
Anybody can help us on this point ?
The only way to solve it is to remove the batterie during 30 min., then put it back and pray...
Then, for no reason, the screen shut down, a few minutes or days after
I've upgrade from WM5 to WM6 with the original Rom of HTC, it seems a little more stable but it shut down every 2 days when i'm lucky
help me to break & solve this problem, maybe can also help the other members..
I tried to upgrade my XDA to WM2003SE everything goes right,
bootloader first time i still use v5.22
but when I soft reboot it freezes on the OZUP screen and
message ONLY FOR MICROSOFT bla bla bla....
i get this ROM from http://www.romkitchen.de/ ==> WM2003SE
then downgrade bootloader from v5.22 to v5.15,
using MMC (flash SD) continue to special rom 1.2,
and then cooked again using PC2002 by my own creation based from
romkitchen, what i want to ask is :
i cannot connect again via dekstop activesyn if i want to change
my ROM because my cradle cannot detect my charger?? but if i charge
directly, its work. What is the problem?
is my cradle/dekstop broken at the charger socket?
so what i need to do? just change the wire or socket or
i use the step like at http://wiki.xda-developers.com/index.php?pagename=WallabyCradleMod
if i prefer use the 2nd method, is that really OK? so just used cradle/deskstop, no need
power charger again if i want to change ROM to WM2003SE, because only can use via activesync?
after i change bootloader to v5.15, keep trying to change but only can via Flash SD Card,
i change to WM 2003 final, still same problem....after finish, only screen cannot enter the
menu or else, only boot screen until i am waiting for 15 minutes??? then change again to
WM2003 but using from http://www.romkitchen.de/tools, still same again....boot screen again...
haiyaaaa.....what happen?? i dont know, tired, always overtime to do this,hehehhee...
all my friends, help me...need your advice ^_^V
*now, i still used ROM from PC 2002,cooked again using PC2002 by my own creation based from romkitchen.
bootloader v5.15
Microsoft Pocket PC --> PC2002
Version 3.0.12039 (Build 11178)
ROM version : 3.17.03 ENG
ROM date : 05/15/03
Radio version : 6.24.00
Protocol version : 324e4
Model No.: PW10A1
I can not really help you, but i was also in the same situation, that i have had a device, that doesn´t work with any other ROM than PPC2002
Flashed several WM2003 ans the WM2003SE but non of them worked.
So i rest at PPC2002
Stefan
ow ow...
auch.. ok, thanks for the comment, i give-up,hehehe..but only for now,
take a rest first but i dont know for t'mrow, actually from 10 flashed,
i got 1 success, can got WM2003SE but with almost empty battery,
i know the inside and already set all, including i notice bluetooth icon,hehehe..
but how? i wonder that my sx56 with fake bluetooth, only icon
but after i charge my sx56 then i soft reset, its gone, back again with only boot-screen, after that, i can't find again WM2003SE ROM only lock with boot-screen, and ONLY FOR MICROSOFT..blablabla...
and about for my cradle/dekstop? how is it? can u give me solution to fixed it??
btw,thanks for helping, tips & trick hehehe...
i will keep trying to find/solved this problem by my own way ^_^V
modify my cradle/dekstop success
its working, i try to modify my cradle/dekstop with that steps (look at the top this thread), and it's work...actually not me who did it, but my friend,hehehehe....i ask his help and he agrre to doit, but all the risk is still at me, now i can charge and also syncronized to my notebook
Hi guys! It's again me
I have problem with flashing my X1.
Downloaded R2AA Generic English ROM. Installed 3.5 .NET framework on my Vista 64bit(all updates, including .NET 3.5 SP1), everythings suppa - when phone is ON - active sync detects, sync works.
Problem appears in that 4 color mode, where I want to upgrade ROM.
4 colored stripes and text appears, but when i plug the USB cable in.... on X1 it shows "USB" text but active sync doesnt detect the device. I just can't sync my X1 with PC while in that "ROM 4-colored mode" - and in progression - cant update my ROM.
Pls help
I want to install R2AA original, generic UK ROM by that method:
1:enter boot mode on X1
2:connect cable to PC and activesync the device (WinMobDevCentre)
3:run RUU and instal ROM's .image file
Because of temporary leak of mem.card
Have you tried running the program when connected with USB in boot mode?
Program should detect your phone
Active Sync is passive process.
How can I manually sync it?
Im in boot mode - entering USB and - no sync - so no ROM update
1. Enter boot mode
2. Connect with USB (when first time windows has to install drivers, wait for completion)
3. Run RUU (the program should recognize your phone)
1:entered boot mode
2:connected USB - windows installed device named "Microsoft USB Sync"
3:RUU doesnt recongnize connected device (no activesync connection)- cannot be continued
Hmm, let's try something else
1. Leave phone on
2. Connect to pc and WinMobDevCen
3. Run RUU
RUU gives me message: The update ultility could not open requested file.
Abuk007 said:
RUU gives me message: The update ultility could not open requested file.
Click to expand...
Click to collapse
Rename the image file to ruu_signed.nbh and place it in the same folder as the RUU utility
It runs! Thanks a lot
I hope it won't damage phone
...................
It crashed damn!
stopped at 10%.... i haven't HARD-SPL, thought generic ROMS don't require it...
What now ?
Abuk007 said:
It runs! Thanks a lot
I hope it won't damage phone
Click to expand...
Click to collapse
If you wait for the RUU utility to say the flash has been succesfull it won't be damaged....
Just don't do anything with your phone/pc during flash
Glad to be helpful...
Look my upper post :/
Abuk007 said:
It runs! Thanks a lot
I hope it won't damage phone
...................
It crashed damn!
stopped at 10%.... i haven't HARD-SPL, thought generic ROMS don't require it...
What now ?
Click to expand...
Click to collapse
You're correct, generic roms have radio and spl included.
Did ruu gave an error code?
ps you do need hard-spl if you're phone was originally in another language!
It had error. But I don't remember number.
On phone it writes: upgrade ROM code error
I had Vodafone R1AA UK ROM
Just want Generic R2AA UK.
Trying to fix...
using x1 Hard SPL to install R2AA UK generic.... will post result
Im getting 262 error.. even in Hard SPL...
HELP!
............................................
FIXED!
Don't know how
tried to run Hard SPL RUU - no effect - error 262
then runned normal, Kovsky RUU with same ROM - it worked!
Abuk007 said:
Im getting 262 error.. even in Hard SPL...
HELP!
............................................
FIXED!
Don't know how
tried to run Hard SPL RUU - no effect - error 262
then runned normal, Kovsky RUU with same ROM - it worked!
Click to expand...
Click to collapse
Probably hard-spl is installed even after the error, so you're abl to flash other rom than vodafone UK.
You can check this by going into boot mode and check what it says in the upper color bar.
it writes:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
so what SPL is it? hard or soft?
Abuk007 said:
it writes:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
so what SPL is it? hard or soft?
Click to expand...
Click to collapse
soft
hard says SPL-0.72.OliNex
THX a lot Lokatho for your great help! If there were any kind of credits on forum - you would get min. 100
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Mod. edit: not dev related, moved to general
gl though
marcin-25 said:
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Click to expand...
Click to collapse
I had same problem. I just remove battery and wait sometime. It should fix that. Well.. for me it fixed
Yes it's works, but is any chance to fixed it, upgrade new rom or something.
Prapably someone tryied upgrade bigstoragerom. If i could have backup rom, that's no problem, but i don't have. Other rom not start from sd card
I installed WWE 03, because it don't change radio. There was my problem. When I tryed to install roms before i change radio to 1.12 and wwe 03 work fine. So try like I do But you need install via usb cable and windows xp like i do (I don't have windows xp in my pc so I used Vmware workstation)
What's that rom WWE 03? I have 1.00.10 radio, rom 1.13.00 WWE, so? Could you send me working rom, who can flash my pda?
WWE 03 is cotulla rom. It had windows mobile 6.1. And I tryed to install this one, but lot time had errors. Firstly, I try to install this rom and I finaly upgraded radio with this rom 1.12, but OS installation stuck on 0%, so I cancel it. Noww I tried install this rom and everything working. No bootloader after soft reset, working good
Whitch rom you upgrade radio? your link not work I try to install WWE 03, but. i run upgrade.exe, next : your device software is about to be upadte from: (empty) to: (empty) . I click upgrade and here Checing the inforamtion on your device ... please wait, and i'm waiting sooo long :/ nothing change. I think that i must upgrade radio to 1.12, but how? I try many way
First link should work. It work for me. To succesfuly check your devise you should connect pc and PDA via active syns with windows XP. Then it will check your device and upgrade should work for me it worked
I have connected pda (windows xp) activesyns. Always, every rom, whitch i want to upgrade: update from: (empty) to: (empty). Only if i turn ON pda, then upgrade from: 1.0.10 to 1.12, click NEXT and pda goes to bootloader. "checking devace data" and nothing happened. I thing the last chance is upgrade rom from sd card in bootloader mode, but it must be backup rom from own pda This is the end :/ i may throw my megican to trash. Thanks for answers.
You should turn on PDA then connect to pc after that will be upgrade from to filled. When you click next automaticly go to bootloader and install new rom
Yes, i try that. Turn on, connect, upgrade, then pda goes to bootloader mode and nothing happened - "checking device infromation ...... " all the time. Do you know any way to upgrade from the sd card. I can't do a backup and change 416 bytes in new roms, like a say xda-developers tutorial. Without that pda not flash new rom from sd.
If you know anyone from your friends that have magician try get backup from him. If you don't have, last thing that I can advise, try other roms. You can find it there