AFTER trying to update my x2 with SEUS it stopped during the update and never came back on nor was turning on only a red light when attempting to turn on.....so wat to do???
I think your X2 is dead... sorry
I think you'll have to take it to the SAT, surelly they could upgrade the firm.
Greetings.
aMMMM wat is SAT?
charger your x2 until fully, uninstall software update on your PC, remove (delete) folder update on program file, install sofeware update on your PC and try doing update from begining again. that meybe the only way get your x2 working again.
good luck....
Related
Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"
What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.
4m4s0 said:
Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"
Click to expand...
Click to collapse
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop
mtechfan said:
What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.
Click to expand...
Click to collapse
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...
kronos1 said:
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop
Click to expand...
Click to collapse
The customizations programs...
what?!
I am able to turn it on, but it's like an empty windows..
Everytime I restart the phone it asks me if I want to factory-reset it, and when I tap "Yes" it freezes at istallation of "_setupJbed.CAB"
4m4s0 said:
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...
Click to expand...
Click to collapse
I was referring to the OS on the computer, not the phone.
mtechfan said:
I was referring to the OS on the computer, not the phone.
Click to expand...
Click to collapse
Oj... Sorry... WinXP SP3
you must install microsoft activesync 4.5 first.
===unreail from china===
unreail said:
you must install microsoft activesync 4.5 first.
===unreail from china===
Click to expand...
Click to collapse
Already did that...
I have an idea for you.
Press no to the factory reset and let the phone start up, then...
yes, I know this is tedious but install all the individual cabs from an extracted ROM you want one by one. When completed you should have a full version again. You can even try to see if the update works again.
Check here -> http://forum.xda-developers.com/showthread.php?t=683619
Please make sure you only install the cabs relevant to which OS you have o the phone. This means... if you have 6.5.2 then only get cabs from a 6.5.2 Rom. Ditto for 6.5.3
As you may have heard already, I am moving over to Android now and have sent my X2 back. So I am sorry I cant help any more than this.
I have problem,I upgrade my telephone Sony ericssone x8 and when I play same game or start aplication telephone stop to work and i must to take batery out...pls help me...Maybe i must again to upgrade 2.1 ?
Why dont you try to repair it with pc companion...
How ?
By doing this you will lose all your phone data... all
Connect your phone with your pc.
If you dont have the pc pompanion installed on your pc, click to install it from the notification that come up when you connect the phone with the pc.
Then Run pc companion, click start on support zone
and if there is a problem with your phone there will be option for repair (i think makes an update).
Or you can just update your phone...
I doing now,I see what happinied
It worked?
You tried a full reset?
WORK,thanks very match....
i tried to update my xperia x2 but i felt the phone is not responding and i disconeccted it then when i start it it worked but the i install some apps and the restarts and never start up again the phone give a small tone on the orange microsoft screen and after a few seconds it's turned off.
any one can help me please ?
thank you for replying back to me and helping me solving the problem.
you are the best
Can you share the solution? Thanks...
don't worry bro, just Repeat the same process(means update process) using SEUS.
follow the instructions as required by the SEUS.
i did the SEUS update again but it failed so i had to take it to a pro man to fix it.
Since you posted this a while ago, i am wondering if you found the solution to your phone. I see the same issue with my X2, the screen is just dead and does not start..
How was your issue fixed??
shrayyef your problem will be solved if you follow exactly what I'm going to say.
I had the same problem with se x2 and I tried many many many times untill I solve the problem all you need install update service of sony ericsson and make update for your phone if it doesnt work try to find a good computer with a good usb port because X2 needs 0.2 port I hope it will work for you and good luck man
There's no update service available for X2 anymore.
This is same with my problem
my xperia x2 now isn't on if i press power button.. only vibrate..
anyone can help this problem..?
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Hellspawm said:
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Click to expand...
Click to collapse
How you came to such a stage??? Have you tried to unlock the bootloader or was it a result of unsuccessful custom rom flashing.....
Please tell in detail about how your phone came to this stage...
well
i find ginger v7 at this link
http://androidforums.com/x8-all-things-root/298647-new-v7-rom-2-3-5-gingerxperia-rom-x8.html
and i try to install in my phone...i did the steps as he say there how to install...and after i got what u see ... before i tried with ginger v5 but i got like answer from mobile the archive is bad...i try with v6 and my mobile after he start to looping on Sony Ericsson logo...and to fix i download SEUS , i update my mobile and it works...but now is not working anymore...i see the led is flashing red color and i think maybe i`m out of battery..i plug to charger but for 30-45 minutes the led stays open green and after is becoming again red and is flashing...this is the story. I think u know when u install a new software in xrecovery after is finish u have the menu to reboot the phone after u choose install from SD card...now with this ginger he says is done but the menu was at last step to choose the backup from sd card...and i press 2 times back key to see the menu to reboot...i select reboot and the rest u see on that clips. Maybe the battery is burn and she don`t want to charge? and because i`m out of power i got this results?
Hi..
I am having problems with my phone.. I tried to upgrade the ROM to gingerbread 2.3 and I followed the instructions in this forum in upgrading the phone. However, when I was in the xrecovery mode to continue with the update, and searched and installed gingerbread from SD it says "successful" then rebooted the phone. but after Reboot m phone is stucked in the "Sony Ericsson" text, not even getting through the sony ericsson logo..
I tried the repair from PC Companion but the download is not going through for the update software, it always say that there is a problem with my internet connection but my internet connection is fine, I am able to connect to my emails and social networking sites..
Hope someone will help.. please...
If PC COmp doesnt work, try SEUS otherwise register at wotanclient. its free to flash...
http://www.wotanserver.com/
thanks.. I will try it now..
I forgot to ask, where to get SEUS? thanks
jincronics said:
I forgot to ask, where to get SEUS? thanks
Click to expand...
Click to collapse
sonyericsson website