I have problem,I upgrade my telephone Sony ericssone x8 and when I play same game or start aplication telephone stop to work and i must to take batery out...pls help me...Maybe i must again to upgrade 2.1 ?
Why dont you try to repair it with pc companion...
How ?
By doing this you will lose all your phone data... all
Connect your phone with your pc.
If you dont have the pc pompanion installed on your pc, click to install it from the notification that come up when you connect the phone with the pc.
Then Run pc companion, click start on support zone
and if there is a problem with your phone there will be option for repair (i think makes an update).
Or you can just update your phone...
I doing now,I see what happinied
It worked?
You tried a full reset?
WORK,thanks very match....
Related
Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"
What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.
4m4s0 said:
Hello!
I got a really annoying problem when trying to update my girlfriends X2 with SEUS (SonyEricsson Update Service).
What i do is: I start SEUS and klick next until the instructions comes up.
Enter "bootloader mode", pressing the volume down and power button so the SE logo with the white background shows and then connect the micro-usb cable to the phone...
BUT
After that the computer finds a new hardware: "Data interface"... When i let it find the drivers it does'nt find any drivers... When I click "finish" it continues to find 3-4 more "Data interface" with the same result.
Anyone know how to bypass this?
THE REASON TO WHY I NEED TO UPDATE THE PHONE!:
The phone is empty... I wanted to factory reset the phone, and everything did well until it tried to customize (install the X2 specific tools) the phone...
It freezes at "_setupJbed.CAB"
Click to expand...
Click to collapse
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop
mtechfan said:
What OS are you running? Is it allowed to check with Windows Update (for example) for drivers etc?
It really should not be a problem. If you are running the latest version of SEUS. You could remove, re download and re install SEUS an then try again. SUES is supposed to install that generic plug and play driver on your system.
Click to expand...
Click to collapse
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...
kronos1 said:
what spwcific tools-u meses upp x2...you have to flash it with the box-only service shops or SE store have that box and programs to solve that..if u are nota able to turn on x2 and do again factory reset-x2 is done. go to service shop
Click to expand...
Click to collapse
The customizations programs...
what?!
I am able to turn it on, but it's like an empty windows..
Everytime I restart the phone it asks me if I want to factory-reset it, and when I tap "Yes" it freezes at istallation of "_setupJbed.CAB"
4m4s0 said:
Windows Mobile 6.5
Yes it is allowed to check with Windows Update. I did it too but it did'nt find anything that way...
Yeah I know.. Last time it did install the generic PnP drivers, but now it does'nt...
Click to expand...
Click to collapse
I was referring to the OS on the computer, not the phone.
mtechfan said:
I was referring to the OS on the computer, not the phone.
Click to expand...
Click to collapse
Oj... Sorry... WinXP SP3
you must install microsoft activesync 4.5 first.
===unreail from china===
unreail said:
you must install microsoft activesync 4.5 first.
===unreail from china===
Click to expand...
Click to collapse
Already did that...
I have an idea for you.
Press no to the factory reset and let the phone start up, then...
yes, I know this is tedious but install all the individual cabs from an extracted ROM you want one by one. When completed you should have a full version again. You can even try to see if the update works again.
Check here -> http://forum.xda-developers.com/showthread.php?t=683619
Please make sure you only install the cabs relevant to which OS you have o the phone. This means... if you have 6.5.2 then only get cabs from a 6.5.2 Rom. Ditto for 6.5.3
As you may have heard already, I am moving over to Android now and have sent my X2 back. So I am sorry I cant help any more than this.
how to exit FTM mode of X2 Xperia?
i tried updating firmware via SEUS but gt this message
""No new software is avalable for your phone""
please help
download sony ericson pc suite and press repair phone and this would do it
Sony Ericsson PC Suite does not work with X2.
i know it doesnt work but it can repair it and ever time i want to reinstall the rom i do this trick ... im sure it is working
fire-warrior said:
i know it doesnt work but it can repair it and ever time i want to reinstall the rom i do this trick ... im sure it is working
Click to expand...
Click to collapse
how?
.
just click install oftware anyway when it says no update available
My phone was working well. Then i installed the new rom from mdj, CM7.
At first it was working good, but then i plugged my phone to pc but it wasnt recognized anymore. So i wanted to change back to another rom. No matter what i did my pc and my netbook didnt recognize my phone anymore. then i tried to update the rom with CW and a fixed rom from CM7. Since then my phone tells me theres nothing to boot in nand. And pc still not recognizing my phone. Pls help me guys. im trying to fix this since 3 hours but nothing works...pls help me.
power off your phone (pull battery and put it back in)
hold volume down and power button until you get to the tri colored screen
plug the usb into the computer
flash over any RUU
i tried that allready but as i said pc dont recognize as usb...so at the screen it says serial and not usb...but still i tried to install it and it didnt work
When i boot the phone it says...nand kernel open failed...is there a way to install a nand rom completely over CW?
Then is sounds like your pc has the prob not the phone.
Reboot PC and also try re-instaling Mobile Device Center or ActiveSync depending on what version of windows you have.
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
have you tried reflashing winmo using sd card? then start all over again.
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
Trying flashing your official WM Rom through SDcard. Once you are back in WM, you can flash your desire NAND Rom.
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
H-KaN said:
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
Click to expand...
Click to collapse
Hope everything goes well for you......Good Luck
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
H-KaN said:
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
Click to expand...
Click to collapse
better fully uninstall mobile device center using softs like your uninstaller and alike to totally clean the installation then plug in usb. Then let Windows 7 do its job in installing the driver.
i cant believe it :S for real i cant believe it...i just changed the usb cable and tried with it :S and it worked :S the driver got installed and now its working :S now thats curious...not working with original cable anymore but with a cable from the nokia n97 :S
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Hellspawm said:
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Click to expand...
Click to collapse
How you came to such a stage??? Have you tried to unlock the bootloader or was it a result of unsuccessful custom rom flashing.....
Please tell in detail about how your phone came to this stage...
well
i find ginger v7 at this link
http://androidforums.com/x8-all-things-root/298647-new-v7-rom-2-3-5-gingerxperia-rom-x8.html
and i try to install in my phone...i did the steps as he say there how to install...and after i got what u see ... before i tried with ginger v5 but i got like answer from mobile the archive is bad...i try with v6 and my mobile after he start to looping on Sony Ericsson logo...and to fix i download SEUS , i update my mobile and it works...but now is not working anymore...i see the led is flashing red color and i think maybe i`m out of battery..i plug to charger but for 30-45 minutes the led stays open green and after is becoming again red and is flashing...this is the story. I think u know when u install a new software in xrecovery after is finish u have the menu to reboot the phone after u choose install from SD card...now with this ginger he says is done but the menu was at last step to choose the backup from sd card...and i press 2 times back key to see the menu to reboot...i select reboot and the rest u see on that clips. Maybe the battery is burn and she don`t want to charge? and because i`m out of power i got this results?
Hi..
I am having problems with my phone.. I tried to upgrade the ROM to gingerbread 2.3 and I followed the instructions in this forum in upgrading the phone. However, when I was in the xrecovery mode to continue with the update, and searched and installed gingerbread from SD it says "successful" then rebooted the phone. but after Reboot m phone is stucked in the "Sony Ericsson" text, not even getting through the sony ericsson logo..
I tried the repair from PC Companion but the download is not going through for the update software, it always say that there is a problem with my internet connection but my internet connection is fine, I am able to connect to my emails and social networking sites..
Hope someone will help.. please...
If PC COmp doesnt work, try SEUS otherwise register at wotanclient. its free to flash...
http://www.wotanserver.com/
thanks.. I will try it now..
I forgot to ask, where to get SEUS? thanks
jincronics said:
I forgot to ask, where to get SEUS? thanks
Click to expand...
Click to collapse
sonyericsson website