Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Incubant said:
Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
i have tried this, but it changed nothing, always stuck in green WM6.1 Screen or by 0% flashing with error [262].
I'm not sure it works but you can try flashing hardSPL by microSD.
Take a microSD and format in FAT32, rename RUU_Signed.nbh in POLAIMG.nbh, insert microSD in Polaris, put it in bootloader, press the power button, it takes some seconds to start, wait.
If it works you can after flash the ROM with the same procedure.
Thanks for all replies!
This is a good idea batista, but i have some questions to this procedure.
Which rom would you take? first hard-SPL and after that a cooked rom?
How i can see that it works, cause you say you dont know wheather it works? Have you made experience with flashing from micro-SD?
Flash before HardSPL and after a ROM, i've Bepe 0.65 ITA.
You can see if it works if after you can flash a ROM, i've never flashed by miscroSD 'cause i've a PC with XP and i prefer to flash via usb but a lot of
people use to flash via microSD.
Trying to flash rom from microSD, has no satisfying effect as well. It stucks on a white screen with blue label "Loading...". Maybe its because 8GB microSD card and it is not able to load a rom from that one.
Please, i am happy about every post. Because i wont have destroyed 450 €
Do you format microSD before ????
Can you try with another one ????
If in FAT 32 doesn't work try in FAT 16.
No i cant try it with another one, but ordered another one on amazon, so on wednesday i hope i can try with another one. Formating with FAT16 is also impossible, i have no such choice in windows XP, but i think FAT32 would be the right one.
I think the main problem is, i have not installed hard SPL, but i dont know how to install without connection to windows xp. And i havent found any thread where it is mentioned to install hardSPL without connection to windows xp.
Have You tried to flash hardSPL via microSD or not ???
Same procedure of ROM flashing.
yes both hardSPL and direct bepe 0.66 but none of them worked. both stucking on loading... screen. Maybe there is a problem with 8GB hc micro sd?
Remove microSD and SIM and try flashing hardSPL via PC with Polaris in bootloader.
i also tried this, but it stucks on 0% updating and on windows xp the 262 Update Error appear. I will give this one a retry tomorrow. But i am not very hopefull.
I'm really sorry, i hope someone has a solution for your problem.
another user named sassa80 had exactly the same issue like you. he did not HardSPL first and tried to flash a new radio rom. the story ended with a RMA return of his HTC.
Hi Incubant,
You may try to flash an *original* ROM renamed to POLAIMG.nbh trought microSD. I used that procedure with a Sandisk 16GB, FAT32 and it worked ok. Before that, mine were kind of bricked on the SPL loader.
I think the step I may have missed the first time was to unplug and replug usb cable the first time I run the update on windows, right after the reset when on the palm screen it said to do so (after all on windows, the application were telling to *not* unplug the cable for 10 minutes). Anyway, if I recall correctly, I failed to update the SPL and at the end of flashing a beta of 6.1 it stopped at 99%. So... I was stuck - couldn't reflash anything. Nevertheless, the procedure that I mentioned on the first paragraph did solve it. After that, I had no problem installing the HardSPL and any other ROM.
Good luck
Another one here with the same problem.
Tried everything I can think of and still stuck on the 6.1 boot screen.
The people who are having problems above with the latest flash e.t.c, which brand of device you using? XDA Orbit II?
For me, it's an O2 Orbit II.
~J~ said:
For me, it's an O2 Orbit II.
Click to expand...
Click to collapse
I thought you might say that, I also have an XDA Orbit II and have noticed a different set of behaviours under the same conditions as compared to the HTC Touch Cruise users. It appears that an Orbit II and a Touch Cruise are both a Polaris but an Orbit II is not a Touch Cruise if that makes sense. Apart from the quite apparent visual differences between the two, are there any internal differences we are not aware of? The Orbit II always appears to act differently, some tweaks/roms/advice have outcomes different to the touch cruise, especially certain reg tweaks.
From using the latest bepe ROM it appears to be quite buggy, also reported by other users, look at bepe ROM thread. Hopefully bepe which deal with the bugs because his ROM, in my opinion, is by far the best.
I too had the STUCK-AT-GREEN-SCREEN issue when I flashed the latest ROM, I waited about 5 minutes, then HARD-RESET, then when presented with the GREEN-SCREEN again for a few minutes, I pressed one of the upper buttons (green phone / red phone).
I hope you sort the problem out.
Hi,
Im a new desperate polaris user with a big problem of flashing.
I was flashing with the new rom phampang and a bug as come at 36%.
Since this moment, the phone still in the 3 color page, with spl 220 olinex. thats all. whan i try to flash anything (radio, rom, spl...) i always find a 260 error.
I try many different method but nothing as worked.
I tryed many many roms, and I flash many times without any problem. I dont anderstand.
when I plug the phone an pc, i get a message of error with the usb device (with vista). Same thing with my other pc xp pro.
please I need your help, I have to find a solution this week end, cant work without my polaris.
thank you !
nooms
polaris (bricked ?)
Can this thread help you?
http://forum.xda-developers.com/showthread.php?t=403883
Must wonder why people has all this problem? I have flashed roms for many years and never hade any problem?
thank you but no:
the mtty method doesnt work: tells that "usb port cant open" !
nooms
If you have hard-spl on your device, maybe you should try to flash with micros sd method.
http://forum.xda-developers.com/showthread.php?t=384084&highlight=guide
Hi All,
As mentioned above, I ahve tried many times to Hard SPL my experia through USB cable but I dunno why it still fail (like what happened to Malik in his topic. Error connection 262). I have tried all the way that mentioned in that topic but mine still fail. Since I am able to flash UK Generic ROM through SD Card Method, Now I am wondering if xperia able to Hard SPL through that method.
Any senior member got any idea?
got a lot of problems too maybe i can help
which windows have you xp vista ?
where does the hard spl procedure stops ?
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken
Hi guys, I just got an HD2 and I am new to flashing ROMs on it, but I am not really a beginner because my previous phone was an ETEN x500 and I flashed a ton of ROMs successfully on that phone. However on this one I am running into a problem.
I successfully installed the bootloader HSPL without any problems. Then, I wanted to do task29 before I installed a new ROM. I followed all the instructions fine, I click NEXT until the device enters bootloader mode, then I see a black loading screen on my HD2 with the HTC logo on it. The problem is the loading bar stays at 0% no matter what I do, it won't install the ROM. After about 5 minutes it gives me the following error message:
www . screensnapr . com/u/icpiuj.png
When I click on the "View Document" button, I get the following message:
www . screensnapr . com/u/dhiria.png
(it won't let me post offsite links to images because I only have a few posts, but I mean no harm with them, I'm just trying to explain my problem. )
I have tried uninstalling ActiveSync and reinstalling, changing USB slots on my PC, I removed the microSD card and the SIM card, I tried entering bootloader mode manually and then running task29, but it all fails with the same results.
The phone still works fine, I disconnect the USB cable from the phone after the flashing failed, and remove the battery for 3 seconds and then the phone starts fine with the original ROM. So there is nothing wrong with it.
What could be the problem please?
Thanks for your help.
Hi everyone, sorry for doubleposting but I have found my solution. I had an incorrect HSPL version installed somehow, although I did follow the tutorial here: forum.xda-developers. com/showthread.php?t=653614
I downloaded the HSPL version linked on that thread and it didn't work.
Then I downloaded the one I found here that said specifically for TMobile HD2: www .mobileunderground. info/showthread.php?t=7997&highlight=HSPL+1024%20..
and this one worked great. I have my custom ROM running now.
HSPL3 is the latest and can be found here somewhere. You must not have had SPL 2.10. Glad you got it to work!