Hi All,
As mentioned above, I ahve tried many times to Hard SPL my experia through USB cable but I dunno why it still fail (like what happened to Malik in his topic. Error connection 262). I have tried all the way that mentioned in that topic but mine still fail. Since I am able to flash UK Generic ROM through SD Card Method, Now I am wondering if xperia able to Hard SPL through that method.
Any senior member got any idea?
got a lot of problems too maybe i can help
which windows have you xp vista ?
where does the hard spl procedure stops ?
Related
Hi,
Im a new desperate polaris user with a big problem of flashing.
I was flashing with the new rom phampang and a bug as come at 36%.
Since this moment, the phone still in the 3 color page, with spl 220 olinex. thats all. whan i try to flash anything (radio, rom, spl...) i always find a 260 error.
I try many different method but nothing as worked.
I tryed many many roms, and I flash many times without any problem. I dont anderstand.
when I plug the phone an pc, i get a message of error with the usb device (with vista). Same thing with my other pc xp pro.
please I need your help, I have to find a solution this week end, cant work without my polaris.
thank you !
nooms
polaris (bricked ?)
Can this thread help you?
http://forum.xda-developers.com/showthread.php?t=403883
Must wonder why people has all this problem? I have flashed roms for many years and never hade any problem?
thank you but no:
the mtty method doesnt work: tells that "usb port cant open" !
nooms
If you have hard-spl on your device, maybe you should try to flash with micros sd method.
http://forum.xda-developers.com/showthread.php?t=384084&highlight=guide
pls could someone tell me is it possible to flash orbit 2 hard spl from memory card i have read in many posts its possible to flash rom but cant find anything for hard spl. As i cant flash from cable as the usb on the phone is knackered with a capitol F.
many thanks in advance to anyone that can help
Hi,
I'm kind of new around here.
My problem is as follows:
- TyTN running PaysRom for about 9 months
- Started to get very sluggish
- Unable to get signal
When i booted my HTC the 'R' and 'G' that appear on screen and used to have values in front of it now display 'none'.
So, I connected it to my PC, 'activesynced' it and tryed to install a new ROM, hoping it would solve the problem.
But the new ROM wasn't installed sucessfully and now all I got is a brick.
I can't even connect it to ActiveSync since it's not recognized.
Is there any solution to my problem?
TIA,
hype
Can you get to the Bootloader?
Yes..
By pressing the Ok+Power+Reset on the bottom button, I see the 'RGB'+white thingie, that I believe is the bootloader..
What SPL do you have? Is it Hard SPL V7(2.10)?
If it is, use the sd card method to install a new ROM.
remember to backup your card 1st.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of the ROM you want onto it and rename to hermimg.nbh .
2. Insert card into Hermes and reset into bootloader.
3. If all things have been done right, follow the prompts....
If the radio ROM has died, I'd suggest trying to flash the Shipped Stock ROM 1st and see if that actually fixes the problem with the blank values on R & G. WM06 upgrade of shipped carrier ROM should also work.
Cheers...
Tks for your response.
I tryed the SD Card method already, with no sucess.
The red stripe shows as follows:
Code:
HERM200
IPL-1.04
HERM200
SPL-2.03
Everytime I tryed on another ROM I always perfomed it using SafeSPL.
Since I don't have 2.1, what can I do?
Tks for all ur help.
What happens when you try and flash a ROM over?
Do you get any kind of error?
You need to find the SHIPPED STOCK ROM. WM06 upgrade should be OK as the CID should match.
Put Hermes into bootloader and connect to PC after unticking "Allow USB Connections" in Activesyncs settings on the PC.
Run the RUU_Wrapper.exe file of the SHIPPED STOCK ROM. ven though activesync won't etect it, the flash file should. Follow the prompts.
Good luck as this seems to be the only way to fix this.
Good Luck...
You might be able to flash a Stock WM5 ROM using the SD Card method. Worked for me when I had SPL 2.03. In fact that's the only ROM it would let me flash over when mine bricked.
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken
hi,
my HTC TyTN II can't boot.
it stopes here
HTC
R 1.70.19.09
G 25.83.40.02H
D 3.34 shifu
that's happend after a reset
help please
have you solved your issue? if no try hard reset..
Hi,
yeah a tried hard reset , but nothing changes
now it works, thanks a lot Shifu
My phone is stuck again in the BIOS verification :s
reply please !
make sure its firmware is updated to latest one
i can't,the device is stuck,I cant connect it to my pc to update the rom
Flash using sc card
you can try to flash with SD Card, as described in the wiki: http://forum.xda-developers.com/wiki/HTC_Kaiser/Flashing
"How to flash your kaiser using the microSD card"
Greetings
cinq
thanks man ,you saved me. love you