Broken glass on X10 - XPERIA X10 General

I dropped my phone and ran over with car wheel. .. Here's how it seems now
Guarantee does not apply under these conditions .. Can it be replaced ? .. In general is there a spare part for this in the SE production line for replacement parts...
Sorry for my bad English (google translate )

does the phone still work? does it turn on?

I' m sorry to hear that ! and I think it can be repaired at the SE's factory
Good luck to you !

it can be replaced, go to ebay.com and check for Xperia X10 "Digitizer"
also you can replace the housing of the entire phone and also the buttons.
all the pieces are there, you just need the knowledge to put it all and in some cases a good glue

Ahh i just did that to my phone as well. The touch still works ect just need the new cover. I looked around and its gonna be about $100 at the most to fix it

im willing to buy the broken phones if it still works and they are x10i's send me a pm if you want to sell it.

Yes..phone works whithout any problems.. Display isn't broken..

not good still under warranty

try to make a story what fits the conditions of you guarantee
I tried it once with my W580i when I completely broke its display and guess what... they made it for me
good luck

the X10 screen seems very durable, mine is little broken also, and thanks to the thin cover that is has on top, you can't feel the broken screen, just see it.
Also the touch screen is working fully functionally like nothing has happened

The only thing i like it about SE is the high Quality Built mobiles ... my friend bought an i phone 3GS when it was new and after a week he dropped it and the screen broke into pieces and was unusable .. i dropped my x10 on asphalt in the street many times and i see only little scratches ... anyway i'm sorry for your x10 and better to check with warranty

chrismorgann said:
Ahh i just did that to my phone as well. The touch still works ect just need the new cover. I looked around and its gonna be about $100 at the most to fix it
Click to expand...
Click to collapse
i sent you a pm but not sure if you got it website is acting funny and it doesnt say i sent the message. anyway im willing to offer you $100 dont care if the screen is broken or if the case is broken as long as the inside as still good and not broken. let me know

I too had my front screen & digitizer completely shattered when a bus ran over it !!
Got it fixed at a SE Service center but it took two months for them to procure the parts ( LCD & Digitizer) & fix it at the cost of ~ 213 $

farhan032 said:
Got it fixed at a SE Service center but it took two months for them to procure the parts ( LCD & Digitizer) & fix it at the cost of ~ 213 $
Click to expand...
Click to collapse
Mmm when i rang up optus they just went on and on about charges. 1st charge is sending it away 2nd charge is like $50 for sony to look at it then 3rd charge is how ever much it costs fix and it could take up to 6 weeks. wasnt too pleased. So i guess my option now is ebay to get a new screen.

Related

T-Mobile wing - Broken LCD screen

I some how managed to break my phone's LCD screen. Not sure how it happened... I swear. I called T-Mobile hoping for a replacement and as expected they courteously asked me go F#%K myself. It's almost a new phone so I'm not willing to give up on it.
So now, I'm looking for a way to fix it. First, I want to know where I can find a compatible LCD screen for a descent price. The once I've come across so far are more than $100. And second, instructions on how to replace the screen.
Any help with this will be truly appreciated.
Thanks!
Anyone ever figure out the replacement process? My daughter broke hers yesterday.
Thanks
when you order a screen..it should come with tools.
you use those to remove the housing..
then you basically unplug the old LCD touch display and plug in the new one..
i think.
I saw the higher priced lcd's on ebay that included tools & instructions. I basically have the tools I need. I would just like to have the instructions and an lcd. Wny are things like this so hard to find nowadays.
foltz61 said:
I saw the higher priced lcd's on ebay that included tools & instructions. I basically have the tools I need. I would just like to have the instructions and an lcd. Wny are things like this so hard to find nowadays.
Click to expand...
Click to collapse
I have the instruction on how to do replacement for LCD (t-mobile wing) only to take out screws and if your not aware of every detailed of what your doing your probably end up killing your WING
Go on ebay and look for a ebay seller by the name of lcd4pda. I talked to him in email about the lcd screen, he has the tmobile wing lcd in stock with tools and instructions. 65.00 to 85 bux to get one and it comes with the digitaltizer on it which my wing has a hole in the digitalizer and i have to order a new lcd, hes my best bet.
New LCD, still not working
I dropped my Wing a week ago and it seemed fine. Put it in my pocket and then took it out a couple hours later and the screen had about 4 cracks in it. I assumed it was because I had dropped it earlier. The screen was white except for some blue areas where the cracking was most severe.
I ordered a brand new replacement LCD screen on ebay and just finished installing it. To my utter dismay the screen is still completely white!! It seems to respond to my touch (it goes brighter when I touch it), and it turns on and off w/ the power switch, but there is nothing but white on the screen.
Is it possible I got the connection loose when I installed it? Or is it likely there's something else wrong with my phone? Thanks in advance for any help.
It's probably a bad connection. Did you ever think you'd have to go through so much disassembly to replace the screen? Just so everyone knows, lcd4pda is legit.
Edit: Shipping was extremely high ($16.99). The location on eBay is shown as Canada but, it comes from Virginia. via First Class. I checked shipping to my location on the USPS site. It only cost $1.98. The package weight is 6oz.
Tell me about it! I had to practically start taking photographs to remember where all of the pieces and screws went. I dropped one of the screws on the ground and it took me 10 minutes to find . I'll disassemble again later tonight and refit all of the connections to see if that makes a difference. I sure hope so.
For those replacing their screens, the service manual:
http://www.modaco.com/content/Pocke...58716/HTC-Service-Manuals-Dismantling-Guides/
has a good set of instructions on how to disassemble the Wing. The hardest part is when you have to use a credit card or something similar to unseat the keyboard. You actually have to insert the card or other plastic tool between the edge of the keyboard and the edge of the phone. The pictures confused me because it seemed like I was supposed to insert the card flat into the side of the phone but really, if your phone is sitting on top of the table, you actually insert the card DOWN into this small space.
Also, for those that are new to removing the connections that are in the phone (like I was), there is usually some tape that you have to first remove before you can unhook the connection.
It worked! The connection from the screen to the phone, the one underneath the RF board, wasn't pushed in quite far enough. I reseated it and voila! I now have a working phone again that can not only receive calls but can make them now!
Now that I know it works, I can also recommend seller superpc168 on ebay. $49.75 for the screen and I spent $15 for 2-day UPS shipping.
Thanks cracula. Just ordered a screen on ebay. Hopefully I should be able to fix my phone.
still have white screen.
does anyone know what i can do to fix that. i tried reseating everything but it seems to still have the white screen. any help will be appreciated.
Replacement Wing Lcd
I got a Replacement LCD for my WING for $55 at WWW.HTCLCD.COM
..........
The weirdest thing!
I found the manual through various places including here on the site. With the manual every thing went fine. EXCEPT THAT NOW THE MAJORITY OF THE KEYBOARD BUTTONS AREN'T WORKING. It must be a faulty connection on my part of course. I'm gonna give it another shot tonight and see if it works a gain. I found the screen on the fonlogix site(blackberry8100parts.com).
Broken lcd tmobile wing
i just had my wing lcd screen fixed but by someone who doesn't work for tmobile he fixes phones and installs iphone programs on them also.. He charged me $100 to fix my lcd screen, tmobile wanted between $150 to $250 to fix it i told tmobile screw it i'll find somwhere and i did.. If you can find an outside source to fix your phone do so..
i broke my screen on my tmobile wing a while back.....was taking a 7 hour drive and the phone was sitting on the passenger seat in the sun for a few hours, later on that evening i picked it up and noticed i had a nice big crack on the screen from top to bottom somehow
called tmobile, they told me i had been paying the insurance they gave me the phone # to the insurance people, called them....paid a $100 deductible and got a brand new replacement wing
never thought i'd use the insurance, glad it came handy!
if its under warrenty dont tell them its broken say its a bloack screen theyll send you a new one and they will charge you once you send it back 100 dlrs for out of warrenty thats not bad for another phone wing
https://blackberry8100parts.3dcarts...ment-LCD-W-Touch-Screen-Digitizer_p_6-69.html
only $55. they sent me the screen but i had to remind them... a bit slow (nearly 5 days to process the order) but it is good and they provide instructions
https://blackberry8100parts.3dcartstores.com/LCD-Installation-instructions_ep_29.html
Screen Replacement Services
Another option, especially for those not comfortable with tearing apart small electronics, is to have the phone repaired by a professional. I actually own a small company called Jet City Devices that can replace the screen on your T-Mobile Wing. The cost is a lot lower than a new phone and you'll have your phone back - with all of the data in tact - in under a week.
Just an option for those that don't want to spend their time trying to figure out how to fix their Wing themselves.

Touch screen broke

Hi! I Love ( D ) my TD2... to bad my touch screen broke already (2 months after purchase) without dropping it or whatever.. Screen and phone works normal.
Im just curious if there are other people having this problem jet?
Do you guys think im f*ck'd? or does htc replace touchscreens within warranty?
if not; Does anybody know what the costs may be for replacing a touchscreen? And is it possible to replace only the touchscreen or must the whole screen be replaced?
A lot of questions , i know.. hope someone can give me answers.
Thank you!
new screen
see here, a similar discussion: http://forum.xda-developers.com/showthread.php?t=537654
if the screen broke and it was not your fault, warranty should cover that ... it seems that buying a new screen and putting it is easy ...
thnx for reply georgeono! guess i'll try warranty first.
same here...touch screen cannot sense any form of touch
Hm.. to bad man. when i put my phone under a bright lamp or in the sun i can see some kind of liquid under the screen(so i know its definitely broke..), same at yours? did you contact warranty jet?
i guess the screen is just not that strong, cause i have treated this phone much much better then my old htc touch and that touchscreen is still working..
my batt went flat...
I go home and charge it..
before full charge, I sms and it is not working anymore..
Soft reset or hard reset no use..
Next day, I see the "liquid" screen under sunlight...
I also take care of it well as this is my first pda and most expensive hp i ever bought...
Going to sent in on this coming thursday...
How about ur warranty, void or consider under warranty??
havent found time jet to send it in but i'll send it tomorrow so i'll let you know. .
I have had the same problem. I sent it back last Friday and have had notification on Monday that it arrived at HTC, but the tracking details they gave me don't seem to do anything. They say it'll be 5 to 10 working days before I get it back.
The engineer on the phone pretty much straight away described the problem as 'LCD Leak' and that was also stated on the postage label they sent through to me.
I found a short term fix for the problem before i sent it off: When you see the touch screen has the patch of liquid inside, use a piece of sellotape or other sticky tape and gently pull the touchscreen outwards away from the phone and it becomes usable again as long as no fluid is touching the screen any longer.
Hope this makes sense.
edit: I got my phone back and the same problem was still occurring - it looked like they had simply take taken the screen off and put it back on again. It has gone back again, but hopefully this time they will actually look at it.
hm i tried your fix but it didnt work for me ..thnx for the tip anyway!
Same like here I think:
http://forum.xda-developers.com/showthread.php?t=522813
I had to sent it back for a repair. Right now my repaired phone starts to get the problem again
kaas11 said:
Hm.. to bad man. when i put my phone under a bright lamp or in the sun i can see some kind of liquid under the screen(so i know its definitely broke..), same at yours? did you contact warranty jet?
i guess the screen is just not that strong, cause i have treated this phone much much better then my old htc touch and that touchscreen is still working..
Click to expand...
Click to collapse
i had the same problem and i can tell you this is caused by too much pressure on the screen. it seems the screen does fall into the phonecase and therefore free itself from the glass. take care with that phone in the pocket!! also the manual says, take out the phone of the pocket when you sit down!! i was shocked when i read that... i mean.. wtf.. what is the idea of a mobile phone which you cant have in your pocket???
haha , and they used to call it a pocket pc! too bad i havent read the manual BEFORE i bought this fragile peace of sh..
kaas11 said:
haha , and they used to call it a pocket pc! too bad i havent read the manual BEFORE i bought this fragile peace of sh..
Click to expand...
Click to collapse
Your just a very unlucky man...
I really love my TD2 and it's working as it should be.
I do not use a case and have it just "naked" in my pocket (without keys and other stuff in my pocket) and its no problem, no scratch...
And i don't call it fragile, ok... it can break easier than a rock in your pockey but still..... I don't know how your TD2 is but mine cant bend a 1/2 mm, it's pretty though.
Phone fixed.... For now
I have received my phone back after a second trip back to HTC and it appears that they have replaced the whole frontage of the phone as a tiny scuff on the metal bit and a miniscule scratch on the screen have gone. The internals of the phone are the same as it has the same serial number and IMEI number.
Its all working so far, I've had no evidence of the fluid in the screen as yet and hope not to again!
Send it back and it will be mended eventually!
Had a similar problem, after 20 days the display broke (not on the surface but under it) because of...who knows, maybe direct sunlight since it was on the seat of my car.
Now, after reading the post, I see it's not a singular problem but also other lucky customers are dealing with it.
The real problem is HTC service. I contacted HTC Italy and they told me to take the PDA to a collection point along with a letter describing what happened since I asked for the warranty cover. After 20 days they told me I have to pay 126€ to repair my D2 because the service decided that it was due to my manomission (aka : you have lied to us). After some enraged mails I sent to them, they replied me I should contact HTC in UK to have the warranty. I decided to pay to have my phone back quickly but until yesterday no answer.
Today I sent another email and HTC replied telling me that the service center is closed for holidays until 24th...
I let you imagine how disappointed I am with HTC and they call it HTC Service Excellence.
Ok, it was my fault...I knew I had to buy the spare part on my own and change the LCD but I trusted the HTC name...big big big mistake!
Just consider those experiences in case you think to send your phone back to HTC service...I will never do this again!
Thank you guys, now I know for sure it was not my fault.
I have my TD2 now 3 month and I recognize the problem others mention. Although this problem is a fault, the system is not broken.
When the phone blocks, look for the "liquid" below the screen. It can be very small to fingertip size. The screen is not broken but the touch screen sticks to the display screen. It occurs by applying some force while using the touch screen. Of course this should not happen but it locks the phone or results in unpredictable touch inputs. IT IS NOT BROKEN.
It can be easily solved. Just wipe, with some pressure, with your thumb over the touch screen starting from well below till above the affected area. The touch screen detaches from the display screen and everything works again.
The solution would be a mod by HTC to prevent the two screen from sticking together.
I hope this helps by preventing people to send their phone back and foreward unnescessary.
Just send in my TD2 today for the same reason. Hope they wont simply "lift the surface up" and send it back to me.
repaired!
i had to wait a long time, but i got a message today that the phone is repaired within the warranty by an external repair service. Hopefully the problem is solved now, but im very glad to hear its not gonna cost me 200 euro's or so!
for the dutch : ondanks alle slechte verhalen over dynafix (volgens mij de gebruikelijke repair service voor een htc telefoon in nederland) is het toestel gewoon gerepareerd zonder onzin over drukschade etc. !
update
got my phone back yesterday , in fact they replaced my old phone with a brand new one! Totally free of costs. So i'm a total htc fan again!
kaas11 said:
got my phone back yesterday , in fact they replaced my old phone with a brand new one! Totally free of costs. So i'm a total htc fan again!
Click to expand...
Click to collapse
Are you sure it's new? I thought they replaced mine as well (after a LOT of phone calls and hassle), but the serial number is still the same.
The counters had been reset, so at first I thought it was a brand new one...

[Q] Touch screen not responding !

hey friends , my hd2 was working very well untill touch screen stopped responding to any touch .. i haven't dropped nor damaged it anyway , it just happened suddenly ..
i found someone said it may be digitizer ribbon related proplem so i did what he advised :
[ Press the top of the red button (when pushing on the top your pushing the ribbon).
Press the bottom of the red button thus releasing the stress on the ribbon.
Press the green button. ]
i got it working for sometime then after i press on the red key it stop working again ..
please can anyone help me to fix this proplem .. ?
I got the same problem
Hi guys,
I have the same problem with my LEO 512, each time I try to reboot the device (Long pressing the power button) the touch screen hangs, but the buttons working properly, and whenever I activate the device by pressing the power button, or rejecting a call with it also the screen hangs.
I think there is a short circuit between the power button and the screen.
Anyone has any idea what to do to fix this issue???
Thanks
good day, unfortunately is a defect hd2 the only thing to do is send it in for service or replace the touch, have just made my warranty is also changing the screen and putting touch screen no longer equal to the original but different. the screen much more crisp and bright and the touch with a stunning response
mmaaggss said:
good day, unfortunately is a defect hd2 the only thing to do is send it in for service or replace the touch, have just made my warranty is also changing the screen and putting touch screen no longer equal to the original but different. the screen much more crisp and bright and the touch with a stunning response
Click to expand...
Click to collapse
I agree with you, I already sent it to HTC service yesterday, and first thing came to his mind that they would replace the "screen" or the touch or "both" , but he will check the power button problem first.
By the way, I got link (unfortunately I will not be able to submit it as I'm still new to the forum) this would help you. It is in the "Touch screen won't work" under the "General HTC HD2 discussion" in "HTCHD2forum(.com)"...
Thanks
John.Massiass said:
I agree with you, I already sent it to HTC service yesterday, and first thing came to his mind that they would replace the "screen" or the touch or "both" , but he will check the power button problem first.
By the way, I got link (unfortunately I will not be able to submit it as I'm still new to the forum) this would help you. It is in the "Touch screen won't work" under the "General HTC HD2 discussion" in "HTCHD2forum(.com)"...
Thanks
Click to expand...
Click to collapse
hey john , to which HTC branch you sent ?!
did he tell you that he can replace the digitizer only ?!!
& what about the cost ?!
also what is the important info. i can find in this forum ?
This is a common problem with the 512 HD2's. I have found that although some temporary fixes do help, such as using only the green button to wake the screen, and holding certain parts of the screen while pressing others do work in a pinch, but only a digitizer replacement will fix it permanently. The replacement digitizers are much better, and do not have the bug. Replacing the LCD with the newer one results in a much nicer picture.
Both of these parts can be found on eBay, and there are teardown videos on youtube to tell you how to replace them, saving you a fairly large amount of money if you are no longer under warranty.
needo said:
hey john , to which HTC branch you sent ?!
did he tell you that he can replace the digitizer only ?!!
& what about the cost ?!
also what is the important info. i can find in this forum ?
Click to expand...
Click to collapse
Hi Needo,
I went to El Mohandeseen branch (Jovi Tronix), they have already replied me that they will have to replace the whole LCD screen with the digitizer, costing about 1,400 EGP (232$) which was a total loss for me .
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
A big thanks to you "Cappii"
I'm thinking of going to "Abd El Azeez street" first and check how much would it cost (if applicable), it would be faster than waiting for 2 to 4 weeks till I get the LCD screen from the US.
Wish you best of luck.
John.Massiass said:
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
A big thanks to you "Cappii"
Wish you best of luck.
Click to expand...
Click to collapse
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
cappii said:
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
Click to expand...
Click to collapse
Yes, I've watched how to disassemble and replace the touch screen videos on you tube before, I noticed that it is very complicated and tricky, but I like this kind of stuff, any way.
cappii said:
This is a common problem with the 512 HD2's. I have found that although some temporary fixes do help, such as using only the green button to wake the screen, and holding certain parts of the screen while pressing others do work in a pinch, but only a digitizer replacement will fix it permanently. The replacement digitizers are much better, and do not have the bug. Replacing the LCD with the newer one results in a much nicer picture.
Both of these parts can be found on eBay, and there are teardown videos on youtube to tell you how to replace them, saving you a fairly large amount of money if you are no longer under warranty.
Click to expand...
Click to collapse
Thanks cappii for your help , i think i'll do that ..
John.Massiass said:
Hi Needo,
I went to El Mohandeseen branch (Jovi Tronix), they have already replied me that they will have to replace the whole LCD screen with the digitizer, costing about 1,400 EGP (232$) which was a total loss for me .
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
I'm thinking of going to "Abd El Azeez street" first and check how much would it cost (if applicable), it would be faster than waiting for 2 to 4 weeks till I get the LCD screen from the US.
Wish you best of luck.
Click to expand...
Click to collapse
Thanks too much john , it's really great idea to use (edfa3ly.com) ..
also i've found someone can fix it for about 500 L.E (may be 400), they say he is expert with HTC & iPhone devices ..
if i repaired it myself , it will cost me about 300 L.E only , but with some risk as i heard that separating digitizer from touch screen can break it !
also i'll have to wait for about 2 or 3 weeks ..
i'm not sure about what i should do ..
what do you think ?!
& what will you do & why will you change LCD (i think the proplem is just related to digitizer ) & did you found it in " abd el aziz " ?!
& Thanks in advance sir
needo said:
Thanks cappii for your help , i think i'll do that ..
Thanks too much john , it's really great idea to use (edfa3ly.com) ..
also i've found someone can fix it for about 500 L.E (may be 400), they say he is expert with HTC & iPhone devices ..
if i repaired it myself , it will cost me about 300 L.E only , but with some risk as i heard that separating digitizer from touch screen can break it !
also i'll have to wait for about 2 or 3 weeks ..
i'm not sure about what i should do ..
what do you think ?!
& what will you do & why will you change LCD (i think the proplem is just related to digitizer ) & did you found it in " abd el aziz " ?!
& Thanks in advance sir
Click to expand...
Click to collapse
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
John.Massiass said:
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
Click to expand...
Click to collapse
Hi needo, please tell me more about this guy you found who is fixing htc devices.
Thanks
cappii said:
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
Click to expand...
Click to collapse
I replaced the screen on my i4 2 times. I think fixing a HD2 is a much bigger PITA
John.Massiass said:
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
Click to expand...
Click to collapse
sorry for being late in reply john ,
i sent it to this guy in " el srag mall " in shop called " Win Mac " he told me that he will change touch ( digitizer ) for 500 L.E in 2 days & he did it .. after i recieved it , it was working fairly good , but not like before .. then i tried to install WP7 , when it booted to welcome screen , found that i've no touch at all ..
returned back to WM 6.5 touch screen working , but not very properly .. tried to install NAND Android it gave me strange line of no.s & stuck at GO GO GO when i try to enter CWM ...
tried to boot into SD android Build , i got the same problem ..
so i decided to install WP7 again & sent it to him & told him about the problem , he told me to leave it & he'll fix it .. after 4 days i went to him & he told me that he tried to change digitizer for 2 times , but it's not working properly (in the best case , only the lower half of the screen got working) so he'll change LCD also ( the strange thing that he told me that i won't bey for that !!! & he will take my LCD instead ) ..
really i don't know if i should believe in what he say or not , but anyway i've nothing to do .. i'll wait to see what will he do !
what do you think ?!
Just wanted to chime in. I have heard various reports of having to change both the LCD and touch, although on my personal experience, the touch seems to fix it. Now, separating the LCD from the touch is a fairly simple process. Once the boards are removed, turn the unit over so that the touch and lcd are up. Heat the touch with a good hair dryer for about 3 minutes, and slowly lift with a plastic separator while its still very hot. Lift from the top, not the bottom.
There is a lot of tape on the bottomod the LCD. Heat LCD with the hair dryer, and slowly lift, keeping the frame flat on a table. If the frame warps, it will be next to impossible to reseat the touch and LCD. Make sure it stays flat.
Take your time and pay attention to all the wires. Take pics to reference where everything is. There is little to no tolerence for error on the rebuild.
I got it fixed
cappii said:
Just wanted to chime in. I have heard various reports of having to change both the LCD and touch, although on my personal experience, the touch seems to fix it. Now, separating the LCD from the touch is a fairly simple process. Once the boards are removed, turn the unit over so that the touch and lcd are up. Heat the touch with a good hair dryer for about 3 minutes, and slowly lift with a plastic separator while its still very hot. Lift from the top, not the bottom.
There is a lot of tape on the bottomod the LCD. Heat LCD with the hair dryer, and slowly lift, keeping the frame flat on a table. If the frame warps, it will be next to impossible to reseat the touch and LCD. Make sure it stays flat.
Take your time and pay attention to all the wires. Take pics to reference where everything is. There is little to no tolerence for error on the rebuild.
Click to expand...
Click to collapse
Thanks Cappii, I already have seen that and I assure you, it's a very complicated and delicate process which needs much accuracy.
needo said:
sorry for being late in reply john ,
i sent it to this guy in " el srag mall " in shop called " Win Mac " he told me that he will change touch ( digitizer ) for 500 L.E in 2 days & he did it .. after i recieved it , it was working fairly good , but not like before .. then i tried to install WP7 , when it booted to welcome screen , found that i've no touch at all ..
returned back to WM 6.5 touch screen working , but not very properly .. tried to install NAND Android it gave me strange line of no.s & stuck at GO GO GO when i try to enter CWM ...
tried to boot into SD android Build , i got the same problem ..
so i decided to install WP7 again & sent it to him & told him about the problem , he told me to leave it & he'll fix it .. after 4 days i went to him & he told me that he tried to change digitizer for 2 times , but it's not working properly (in the best case , only the lower half of the screen got working) so he'll change LCD also ( the strange thing that he told me that i won't bey for that !!! & he will take my LCD instead ) ..
really i don't know if i should believe in what he say or not , but anyway i've nothing to do .. i'll wait to see what will he do !
what do you think ?!
Click to expand...
Click to collapse
Hey Needo, I'm sorry for hearing that about your phone, I wish that it would be recovered soon, and this guy would be as honest as he said. I feel that he sensed that it's his fault to break the LCD. Anyways I wish that it would be fixed by now.
About me, I went to "Abdel Azeez street", hoping to find someone who might know something about this device, and you know what, I found that many people there already working with experience in Iphone and HD2. And I found that they fix it while you are with them to make sure that they don't cheat you, or fix it with used spare parts. For me, I found that guy who changed the touch in front of me with a new sealed one, it was a process of about 3 interesting hours, which cost me 550 EGP (91$). Of course it wasn't in the best quality as there are some dust between the LCD and the touch screen, and there is some light coming out from the bottom of the phone between the frame and the touch, but I consider them as minor losses . It's working perfectly now at last.
If you ever wanted his contact, I would be glad to forward it to you anytime.
cheers.

MyTouch 3G slide screen not working

Hey guys, I have had this phone since August of 2010 and personally its really nostalgic, in all reality I prefer it over my Galaxy S, Especially for the Slideout keyboard and seems to have better ROM support :/ But around November 2011 the screen would spaz out not respond and just not turn on. Sometimes it would but so dark it was nearly impossible to see it. I'm not sure if the screen is dead I haven't used it since November when I got my Galaxy S. If the screen is dead, is there any type of repair service? or a way to buy a top half for the screen and replace it?
Look on Ebay, there are lots of these phones for cheap.
Sent from my T-Mobile myTouch 3G Slide using xda premium
Sounds like a loose connection on the cable for the screen. I had the same problem with mine. I'm still using this phone now. Free fix if you can figure out how to take the phone apart & basically unplug & re-plug. Be super careful though! And of course it could be a different problem.
You can buy a new one very cheap in amazon or ebay i dont think it worth to repair
Not sure it's the right place to post this, I replaced the digitizer in my old MT3GS (cracked in my pocket), and ever since, Ive have the screen-spazzing issue as well - wasn't my first time replacing a screen, either. For me, the solution _every time_ has been hit the power button to lock the screen, hit it again to get back to what I was doing... Never had to totally power down to fix the spaz :\
If it'd interest you at all, I'd be willing to send you the phone, charger brick, (and the metal case if I can find the damn thing) for $50+ship - thats what I paid for the new digitizer... If you have better troubleshooting skills than I do, good on you, because I've torn this one down and put back together again at least 2 or 3 times since replacing the digitizer, and can't find a single loose connection - maybe you'll have better luck than me?
Thanks
L4T
I called a repair shop I found on craigslist and they mentioned it's more than likely the flex cable, not the lcd screen or glass digitizer. These phones' cables go through lots of wear due to the sliding mechanism. They gave me a 70 dollar estimate, so I just don't slide my phone out anymore to prevent the screen from spazzing out or blacking out for good (it happened to a friend of mine's MTS3g). I've also seen the cable for sale online on ebay or repairsuniverse but I'd rather wait for my full upgrade than invest in it AND risk not fixing it.
I really wanna use this phone again, the slide mechanism is so worn on it you can feel it its kinda tough to do its not springy like it was outta the box, also on ebay these phones still run close to 200 dollars, I would take it apart, as its out of warranty anyways, but I don't have the proper tools to do so, like the mini philips head and the tiny socket wrench. And I hear it is most likely the flex cable but as I said I can't access it.

[Q] Broken screen.. what to do?

Hi all,
this morning I left my tablet at home and when I come back found it with broken glass (I think tmy little brother dropped it, but he doesn't confess)..
Sometimes touch works, more often not.
However.. What can I do? I read that some lcd are not glued properly, and it could be my case, because on the left it's a bit lifted on the center.
In your experience, is there hope that it can be repaired for free?
And if not, where can I find replacement (I only found this: http://www.powerbookmedic.com/Google-Nexus-7-LCD-and-Digitizer-Assembly-p-22606.html , but it isn't available)?
Thank you!
sooooo sad! :/
Pictures of damage: http://imgur.com/a/E7Rkf
diaSalvatore said:
Hi all,
this morning I left my tablet at home and when I come back found it with broken glass (I think tmy little brother dropped it, but he doesn't confess)..
Sometimes touch works, more often not.
However.. What can I do? I read that some lcd are not glued properly, and it could be my case, because on the left it's a bit lifted on the center.
In your experience, is there hope that it can be repaired for free?
And if not, where can I find replacement (I only found this: http://www.powerbookmedic.com/Google-Nexus-7-LCD-and-Digitizer-Assembly-p-22606.html , but it isn't available)?
Thank you!
sooooo sad! :/
Pictures of damage: http://imgur.com/a/E7Rkf
Click to expand...
Click to collapse
At this moment you have Two Options..
1. Sell it on Ebay for Parts you probably get about 50 to 100 at most.
2. Pack it up and store it away in a closet and forget about it. Until the Screens are being sold as parts.
the reason for both options is due to Asus not selling the LCD/Glass at the moment as a Part.
they are still manufacturing the Nexus 7 and soon will be making the Nexus 7 with 3g capability.
so there biggest priority at the moment is to keep making them.
you can send it in for repair with Asus but it will cost you about $160.00 just to get it repaired.
not to mention how much it going to cost you to ship it to them.
is the device frame cracked or damaged broken is the back scuffed or cracked .. Does it look like its been dropped. IS THE Crack on the left side. CAN You post pictures. Answer the above and give some pics and more info..
i know you do not really know for sure .one more question was it moved can you tell for sure rather someone was using it or not ?
If you really feel it cracked laying where you left it . Without anyone touching it . CALL GOOGLE PLAY.. But please do not be dishonest . There is a issue with the screen lift cracking and becoming unresponsive . as well as backlight flashing issues..
Looking forword to seeing pics and more info

Categories

Resources