Database Users

[Q] i think i bricked my mytouch 3g...please HELP..ASAP..PLEASE

I have a original nytouch 3g rooted, just flashed to the cm6-rc2, it worked fine EXCEPT there's NO market app and gmail app. so i went online to ask and some1 said to install market and gmail i need to have Gapps installed and he showed me to go to Rom manager to get those. I went there and saw google app but to be able to install it, it said i must have the ClockworkMod installed first, so i did then it prompt to reboot the phone...i hit OK to reboot it and the phone just got STUCK on the Booting loop, never got to the home screen, i assumed i bricked the damn phone. basically, iam screwed..please anyone help me to fix it, PLEASE..thanks alot

Can u get into recovery or anything? That shouldn't brick your phone. U need to go to amonra 1.7.0 recovery. Forget that method of gapps. Just download and flash the link. People have been having a lot of problems with your method
Sent from my Chromatic Magic using XDA App

well, i tried to turn on the phone by holding home+power, it went to this screen:
ClockworkMOd Recovery v2.5.0.1
-reboot system now
-apply sdcard:update.zip
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard
-nandroid
-partitions menu
-advance
________________________________
ClockworkMod Recovery v2.5.0.1
if i try to select reboot system now, it wont work, it'll will boot but got stuck on boot screen forever.
i did try to select "wipe data/factory reset" then "wipe cache partition" then select "intall zip form sdcard" then it takes me to my sdcard that shows this:
Choose a zip to apply
-Android/
-clockworkmod/
-dcim/
-lost.dir/
-update-cm-6.0.0-DS-RC2-signed
I select "update-cm-6.0.0-rc2..", wait for it to flash then reboot and the phone still gets stuck on boot screen, seems like nothing fixed..
I assumed the issue is the ClockworkMod messed everything up, but i just don't know how to get rid of it....
sigh....so frustrated...i had an iphone before and it's so simple, if you mess up just restore via itunes and everything goes back to stock.. anyway, please help anyone...please

Did u try downloading amonra 1.7.0 and flashing it?
Sent from my Chromatic Magic using XDA App

Did u do a nandroid backup before u flashed the Rom? If u did just restore. If u can I have RA-sapphirev-1.7.0g as my recovery. Same phone as u. You're not bricked. Just need to undo what u did.
Sent from my Chromatic Magic using XDA App

no, i didn't do any backups...stupid me..is there any other way to fix when i don't hava a backup?

Can you get your sdcard to show up on your computer? If you can. Try wiping everything in recovery. Re-partition your sdcard leaving the values as they are. Then download cyanogen 5.0.8 http://forum.xda-developers.com/showthread.php?t=688262 putting that on your sdcard and flashing it to see if it boots up. Also this is the recovery you should have stayed with. http://forum.xda-developers.com/showthread.php?t=530492 and need to go back to. Page also has instructions on different ways to flash it. Let us know what happens. Use g version at top of downloads btw

Make sure that while in recovery you flash the 5.0.8.zip and then flasht the Google Add-on .zip before rebooting.

Actually I flashed them separate and all was well. Just trying to get you into the os so u can flash the recovery and get rid of Rom manager. If u can't get your sdcard on your comp to load another Rom to boot u might have to change your recovery through fastboot. Then flash new Rom. http://forum.xda-developers.com/showthread.php?t=532719. More info on fastboot flashing ect.
Sent from my Chromatic Magic using XDA App

thanks alot guys for helping, i got it worked again, though. i load cm5.0.8 on another sdcard and flash it, it finally booted to the home screen..however, when i tried to go to recovery screen again by holding home+power to flash gapps app, i still see the white "clockworkmod.." on top and bottom of the recovery screen though...weird..is there anyway to get rid of it??? cause' i think it's installed on my phone but don't know how to go in my phone to delete it. any ideas?? thanks

U still have that recovery flashed to your phone. Download the one I posted put on sdcard and use terminal method on that thread to flash
Sent from my Chromatic Magic using XDA App

clock work is fine.... do u still see the options u have? install from zip? after downloading gapp or roms correctly... go into download folder, locate gapp or roms n flash.
by downloading correctly means... having good internet connection and not having data shifting from 3g to e to wateva. plus dont do anything else beside the download. if u lose connection or shifting in connection speed... cancel download n redownload...this will keep download file from getting corrupted during download process... for future referrence - u should do this to everydownload
we r here to help hopefully this will fix ur problem
rooted mt3g 32b
cm6-rc3 htcClay 1.3
clockwork 2.5.0.1
radio 2.22.19.261

haha to make it simpler... flash cm6 rc3... gapp is preinstalled
rooted mt3g 32b
cm6-rc3 htcClay 1.3
clockwork 2.5.0.1
radio 2.22.19.261

ROM Manager and RA Recovery

Does ROM Manager work with AmonRa Recovery?
I'm asking this because I currently have Clockwork and when I try to flash an alternate recovery through ROM Manager, it says that features within ROM Manager will be unavailable until I flash Clockwork again.
So...hence my question. And if I wanted to switch to RA recovery, would I have to manually push it through adb or is using ROM Manager fine?

champ052005 said:
Does ROM Manager work with AmonRa Recovery?
I'm asking this because I currently have Clockwork and when I try to flash an alternate recovery through ROM Manager, it says that features within ROM Manager will be unavailable until I flash Clockwork again.
So...hence my question. And if I wanted to switch to RA recovery, would I have to manually push it through adb or is using ROM Manager fine?
Click to expand...
Click to collapse
No, you can flash Amon through ROM manager, but if you want to manage the nandroid back-ups you've done through ROM manager, you need to flash back to clockwork recovery. I always keep Amon on since Clockwork may or may not wipe the dalvik cache properly, and only revert to clockwork recovery when I need to restore or create a back up of my ROM.
No need to use ADB unless you get some kind of an error flashing from ROM manager.

rugedraw said:
No, you can flash Amon through ROM manager, but if you want to manage the nandroid back-ups you've done through ROM manager, you need to flash back to clockwork recovery. I always keep Amon on since Clockwork may or may not wipe the dalvik cache properly, and only revert to clockwork recovery when I need to restore or create a back up of my ROM.
No need to use ADB unless you get some kind of an error flashing from ROM manager.
Click to expand...
Click to collapse
Thanks for the help. Really appreciate it.
I never knew how easy it is to flash the recoveries. I always thought I would have to push it through adb again like the time I rooted!
I'll def try what you are doing with keeping Amon and switching back to Clockwork when needed.
Thanks again for the help!

No worries; glad I could be of help.

[Q] Cant run update.zip to get clockwork anymore

Hello all.
the other day i installed [ROM] VIPERrom v1.0.2. The install went great, just as any other ROM install I've done in the past. Today i wanted to try my luck with quantum but ran into a road block.
every time i boot into manual recovery mode to run the update.zip to access clockwork i get a very weird error i cant seem to figure out. Google really hasn't
been much help either.
When i hit update.zip i get:
E:can't mount sdcard/dev/block/vold/179:1 (no such file on directory)
Then another error saying the E:/update.zip is invalid or something along those lines.
I want to say this might have something to do with file structure change in viperrom maybe? Recovery is still 2e and i always boot to manual.... The phone and ROM still functions fine, i just want to try quantum or go back to baked snacks or another 2.1 variant for battery life....
I have reformatted my sd after backing up to my pc... no dice
Is a possible remedy to try and flash back to stock di18? Or could that cause issues...? what about odin?

for anyone else who happens upon this problem, just flash back to a stock release with odin.
Fixed me right up!
Thanks for the tools devs!

While you can go the Odin route, a simpler method would be to go to CWM recovery, factory reset at least 3x, clear cache at least 3x, and instead of selecting "update.zip" choose "install zip from sd card" then navigate to the ROM you want. Since you are changing ROM's all together it is not an update.

leatherneck6017 said:
While you can go the Odin route, a simpler method would be to go to CWM recovery, factory reset at least 3x, clear cache at least 3x, and instead of selecting "update.zip" choose "install zip from sd card" then navigate to the ROM you want. Since you are changing ROM's all together it is not an update.
Click to expand...
Click to collapse
Thanks... yes, its not an update.zip, its a rom... you need to choose "install zip from sdcard" then "choose zip from sdcard"... glad you got it fixed though
Sent from my Epic [IMPact]

That didn't work for me last night
leatherneck6017 said:
While you can go the Odin route, a simpler method would be to go to CWM recovery, factory reset at least 3x, clear cache at least 3x, and instead of selecting "update.zip" choose "install zip from sd card" then navigate to the ROM you want. Since you are changing ROM's all together it is not an update.
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App

i had the same exact problem couple days ago.. and fix it the same way as you hahaha.
One thing i dont understand though guys, yall said we can just install from zip where i do not see that option straight up.
All you see is reboot, apply sdcard update.zip, wipe data and wipe cache. How did yall directly go to install from zip? am i missing something?
Thanks!

I think everyone here is talking about the update.zip from the normal recovery.
For me i always have to hit apply update.zip in normal recovery to get to clockwork unless i use rom manager.

Sounds like you guys are talking about the stock recovery, not clockwork. To be clear, clockwork recovery is loaded by powering on the phone while holding the vol. down and camera buttons at the same time. If you are in the right recovery you will see the option you seek!
Sent from my Epic using XDA App.

thanks all for the replies. i was talking about the stock recovery...
Any time i want into clockwork i do the vol d+camera+power combination.
That take me to manual stock recovery where i load an update.zip to access clockwork....
Stock wouldnt let me load clockwork anymore... Odin fixed it but this raises another question for me....
Do i have clockwork set up correctly? Should the button combo take me straight to clockwork?
Sorry for being a noob guys and thanks for the help!

I'm out and about and can't link it but noobnl posted a redirect fix that let's quickboot and root manager take you straight to clockwork. It bypasses the stock recovery thus no need for the update.zip anymore. I think that's what you need...rom manager is supposed to work with it too I believe.
sent from an Epic4g through the cosmos

UltimateNubs said:
Do i have clockwork set up correctly? Should the button combo take me straight to clockwork?
Click to expand...
Click to collapse
If you have the current version of cw then the three button boot should take you directly to it. Not sure what the problem is, maybe someone more experienced than me will know.

ROM flashing problems with my EVO :(

Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing

guribe94 said:
Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
Click to expand...
Click to collapse
Hi there. First off, I need a little more info, like which rom you are trying to flash right now. Also, what radio's and pri do you currently have?(menu>settings>about phone>software info, radio is baseband) If you have the older radio and PRI, (same as the ones in my sig), and you are flashing to a 3.70 software ROM, which most likely you are, you will need to either flash a custom kernel, while in recovery, just after flashing the rom (before you boot). Or upgrade your radios. If you have already updated your radios, and you're still experiencing this, I would first and foremost, switch to Amon Ra recovery (which version of clockwork are you on, btw?). The easiest way to switch to Amon Ra, is to get Rom Manager from the market. Use rom manager to "flash clockworkmod reocovery" (even though you already have clockwork, do this) Then scroll down, and you'll see "flash alternate recovery". Select that, and let it flash Amon Ra for you. Shut the phone down, and manually boot into recovery (vol down+power). Use amon's recovery to do a full wipe, (data, cache, davlik cache x3) Then flash calkulin's format all.zip. That will ensure a good wipe. Then follow my above mentioned instructions, and try again. That should work. If it doesn't, report what the exact errors are here. Good luck

Maybe this is a stupid question, but are you able to nand restore to a rom where your phone will actually boot up?

Calkulin format all zip is your best bet. It will wipe your system data, data, cache and dalvik cache. A full purge.
Just have a good zip like chris sprint lovers rom. And better yet a PC36100.zip from chris all in one update thread.
Sent by my eVo running Vin255764 Plutonium...yup

Here's a few suggestion:
Change your radio version - Some kernels don't work right with the newest, and some don't work right with older ones.
Change your kernel - This is always the best suggestion IMO. For a sense based ROM run one of netarchy's latest kernels. Often a bootloop is because of a kernel/radio issue.
Plus with netarchy and setcpu you'll get some wicked battery life.

Try wiping everything, and then try again. Also try flashing a different rom

having issues flashing myn rom
have 3.7 evo rooted unrevoked3/kernel 15
when i try to flash from clockwork mod it just blinks right quick but doesn't do anything.. all the things are up to date .. can anyone help?
when i flashed amon ra and flashed rom.. it says E: can't find update script..

i dl rom manager and did the alt recovery to amon ra. it still won't flash the rom.. but now i have another problem.. my sd card clockwork back up is not there... and now i can't restore to previous state. i can't get to the regular phone interface. what can i do to restore?

[A] Bootloop after flashing a ROM via 3.0.0.5 Recovery image.

What you did .. .. ..
Okay so you've rooted your newly bought MyTouch4G, and you've made sure that s=off and you've flashed Clockwork ROM manager's recovery image that you got from the market. That is all the correct order. But when you flashed a ROM you got stuck in a bootloop.
Am i screwed???
Don't worry you are just in a "soft brick mode", or "limp mode" if you will.
What happened? Why is it doing this?
The Image that you downloaded and installed 3.0.0.5 is for 2.3 (Gingerbread) based ROMs only. [n3rd note] these are ext4 style ROMS. They act and store information differently than 2.2 which are Ext3 ROMs[/n3rd note].
This could also be caused by trying to flash a 2.3 using a older 2.x.x.x version of the Recovery Image. Those will only support the Ext3 style ROMs, which are FroYo (2.2) based ROM.
Okay what do i need to do to fix it, there are two methods.
This is Method one it's the older version.
You must use this method if you do not have the engineering screen
If you are using the 3.0.0.5 Recovery image
To fix your problem you need to flash any 2.3 based ROM, for time sake i will recommend Cyanogen(mod). Link to Cyanogen(mod)'s CM7RC4. While you are there you need to also store the G/Apps.
If you are using the 2.x.x.x Recovery Image
To fix your problem you need to flash any 2.2 based ROM, for time sake i will recommend RoyalGlacier Thread can be found here
- Question: How do i find out what Recovery image i am using
- Answer: Boot the phone into the recovery mode. We'll touch on that in a little bit
Now when you download both of those files you also need to store them to SDCard.
NOTE: If you are using 2.x.x.x and going to flash RoyalGlacier you will not need the g/apps. They have included this in their ROM, and MAKE sure to follow their specific directions for installing the ROM.
- Question: Now how in the world i am going to do that since my phone is in bootloop.
Answer:
Two ways one can do that
1) use a SDcard reader and just plug the card into a main USB port.
2) Mount the SDCard in the phone via the Recovery Image. *** i'd recommend this method since you are going to need to be in recovery anyway ***
Pull the battery from the phone an put it back in, then put the back on the phone. turn the phone on holding the power button along with the volume down rocker button. That will boot the phone into the HBoot (Engineering) Screen. From there you will see an option that says "recovery" [this is what i mentioned earlier, about the different versions] use the volume rocker to select it, then tap the power button to select it. The phone will reboot into what is called the recovery image. From there you will select "mount" then USB. That will mount the SDCard to the Computer.
If you are using the 3.0.0.5 Recovery image
Once you have move Cyanogen(mod) and the g/apps to the SD card unmount the SDCard.
Then navigate to "wipe data/factory reset" you will want to wipe the phone. That will format everything to a fashion that can be written over w/o problems.
Then navigate to "install .zip from sdcard" > " choose .zip " > then flash the main Cyanogen(mod) ROM. Then do the same but flash the g/apps that you downloaded.
Once those are done you can re-boot the phone. That will boot you into cyanogen.
If you are using the 2.x.x.x Recovery image
Please use the link i supplied above to get that ROM up and running once it is done, according to their instructions come back here.
Now i understand that may or may not want Cyanogen nor RoyalGlacier on your phone. Well take care of that
What can i do to prevent this from Happening again?
Once you are up and running (make sure to log into your Google Account) go to the market and download Clockwork ROM manager again, and re-flash the recovery image.
Once you are done with that i HIGHLY suggest upgrading to the newest 3.0.0.6 Recovery image. You can do that one of two ways.
one way is to flash True_Blues method for installing 3.0.0.6 recovery image. Use this thread..
This is the way that i would personally recommend.
The second way is download the 3.0.0.6 recovery image, which i've attached and flash it via the ADB commands. If you want to do it this way you do not need to download Clockwork Rom Manager, you can "just flash it". If you need help with that, if you are using Windows or Mac, see my signature for True_Blue's method on EZ ADB. If you are using Unbutu 10.10 use this This Method to get ADB running. This is the method i used to ADB running on my Linux NetBook.
Download the file that i've attached and store just the recovery image from the .zip to the SDCard, from the ADB commands type
adb shell
su
flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
More information on this process can be found here
That will flash the newest recovery image to your phone
Once you have installed the 3.0.0.6 ROM Manager you can wipe and flash ANY MyTouch4G ROM that you want. It will handle both 2.2 (ext3) and 2.3 (ext4) ROM formats.
This is the New Method - Which is a little easier.
AND YOU MUST HAVE THE ENGINEERING HBOOT
Thanks to TeeJay for inspiring this.
I am going to assume that since you have the Engineering Screen you are more familiar with what you are doing so i'll be more to the point with this walk-through.
you will need to have ADB up and running for this method.
1) Download the attached file and store just the .img to your folder from which you preform all of your ADB commands
2) plug the phone into the computer
3) boot the phone into HBoot
4) from the ADB commands change the drive to the folder where you stored the recovery image.
5) type these commands
Code:
fastboot flash recovery recovery.img
the screen should say something to the degree of
Code:
sending 'recovery' (3426 KB)... OKAY [ 1.172s]
writing 'recovery'... OKAY [ 0.797s]
finished. total time: 1.969s
6) then select "bootloader"
7) navigate to "reboot recovery"
8) flash your ROM of choice.
9) enjoy your ROM of choice.
Please feel free to use this in your signature or link people back to. If you feel i made an error in this post please PM and i'll edit it accordingly.
If this thread has helped you solve your problem please hit the "thanks" button.
THE RECOVERY IMAGE HAS BEEN UPDATED TO THE NEWEST ONE.

good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.

leo221 said:
good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.
Click to expand...
Click to collapse
Added that method as well.

May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2

Thank you for this!! Exactly what I needed...!

austengeist said:
Thank you for this!! Exactly what I needed...!
Click to expand...
Click to collapse
Glad it helped, just make sure to hit the "Thanks" button in the first post.

dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.

option94 said:
May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2
Click to expand...
Click to collapse
Added.
aalsmadi1 said:
dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.
Click to expand...
Click to collapse
Well i work in the Imported Automotive parts. My job requires me to basically sit around and answer the phone when it rings. We have our own "call center" room. I just pick up the phone and answer question and sell parts. Like right now i'm working on a engine rebuild kit for a 1975 2Ton Mercedes Bens..... so i get some free time from time to time, and XDA is one of a few sites they allow me to visit.... BGR/ Android and Me, Android Central are the others....
I can see why some people blow up, spend +$200.00 on a phone then turn around and blow through something w/o taking the time to read something and then you get stuck in a bootloop.... i can see why people go bonkers. But slowing down and reading would solve alot of problems. Heck i've got 3 great threads in my signature that would solve alot question that one could have with a new device.

fixed my problem

Thread stuck.

Great guide!

Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?

DHSdrone said:
Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?
Click to expand...
Click to collapse
Meaning you want to run Cyanogen(mod)? Well jump over to their site and download the ROM of your picking; Nightlies are alpha builds, and the RC's are beta builds. I've ran both and both are extremely stable. I have links supplied in the first post. and directions for that matter. just make sure to do a nandroid backup before wiping and flashing.

Thanks ....Saved ME LIFE

Posting so I can see the "thanks" button. Doubley thanks you saved my bacon....err phone!! Hmmmm bacon!

Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!

b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
Pull the battery. Hold vol down power on them restore cm7. Then flash cwm 3.0.0.6.
Sent from my Inspire 4G using XDA Premium App

b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
What button are you pressing to select the option? you should just use the trackpad.

Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!

b0rnsusp3ct said:
Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!
Click to expand...
Click to collapse
Why do you say that?