Database Users

[Q] What in the hell? I dont get it !!!!!

Rooted my new evo with 3.70 with unrevoked and the pc3img. Loaded sprint lovers and runs fine. I am trying to install the new fresh 3.5.0.1 ROM. I took the pc3img off my card and put the new fresh zip on my card. I reboot the phone into recovery So I go in and wipe data, wiped cache, wiped dalvik. Reboot recovery. I selected install zip from sdcard, then choose zip from sdcard, then selected fresh-evo-3.5.0.1.zip. It then says confirm install? THIS CAN NOT BE UNDONE. I scroll down and hit yes. It starts writing the boot.img then I get this message.
assert failed: write_raw_image ("tmp/boot.img","boot")
E:error in /sdcard/fresh-evo-3.5.0.1.zip
(status 7)
installation aborted
It does this on every ROM I try to install. What do I do?

flash ra recovery and then try to install.

ra recovery.........where do I get that from?

easiest way is to install rom manager from the market, it will install it for you

You shouldn't be rooting phones if you have to ask that question.

by the way, Im using clockwork. Can I flash like amon ra from my sdcard while in recovery, then flash the fresh rom?

randyreed1971 said:
by the way, Im using clockwork. Can I flash like amon ra from my sdcard while in recovery, then flash the fresh rom?
Click to expand...
Click to collapse
if you can't boot into a rom then you can adb push it into your phone, I'm not familiar enough with that method to walk you through it
this thread will help you http://forum.xda-developers.com/showthread.php?t=705026

If I redo my phone from start, can I install Amon ra instead of using clockwork? I think that clockwork is why I am having problems. I cant do backups or anything the way it is right now.
When I say redo my phone, i mean just totaly erase my sdcard and go back through and "reroot" my phone from the beginning. My phone went downhill when I installed clockwork, so next time I am not gonna use it.

yes, you can find the 3.70 ruu in the dev section, it will completely wipe your phone and unroot. use if your phone came new with the 3.70 software
found it http://www.megaupload.com/?d=86NCAM22

The way to install Amon RA is to use rom manager, if you dont have it get it. Go in and flash clockwork recovery, just to make sure it's flashed fully. Now scroll all the way down and go to flash alternate recovery, which is actually Amon RA. There you go. Now you you can flash just like you would through clockwork. Select your file and hit power. Now this time instead of scrolling down to confirm it will tell you to hit power to confirm. Good Luck with fixing your phone!

squick said:
The way to install Amon RA is to use rom manager, if you dont have it get it. Go in and flash clockwork recovery, just to make sure it's flashed fully. Now scroll all the way down and go to flash alternate recovery, which is actually Amon RA. There you go. Now you you can flash just like you would through clockwork. Select your file and hit power. Now this time instead of scrolling down to confirm it will tell you to hit power to confirm. Good Luck with fixing your phone!
Click to expand...
Click to collapse
Do this. ^^^ the current version of clockworkmod has issues with older hboots, causing that error.
Sent from my blah blah blah blah

CWM not working

I have been having issues with CWM on my Fascinate for about 2 weeks now. Whenever I try to flash anything via CWM I get this message:
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
The "reboot system now" is highlighted and I cannot do anything to select apply update.zip
On the bottom part of the screen it says:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
Now I have flashed back to D101 and did the ota update to DL09, and flashed the CWM via odin posted on a thread from the android central forum, it is basically a version of CWM for DL05 and DL09. (can't post outside links so I havent posted enough in this forum).
I have tried to apply the update.zip but whenever I do that, after about 25% of the way through it goes back to the error.
I have completely run out of ideas and the people at the android central forums have as well. I have tried everything that I can think of but obviously I am not doing something right.
Can anyone give me some suggestions as to what I can do to try to resolve this issue? Or if there is a way to flash a rom and kernel without CWM. I really do not want to be stuck with stock Fascinate so anything would be appreciated.
Thank you

You have to go into CWM immediately after flashing in Odin, before booting up, and flash a new kernel. DL09 breaks CWM on the stock kernel
Sent from my SCH-I500 using XDA App

I had that same issue until a user on another forum informed me that right after flashing cwm, replace battery and go immediately into recovery mode, do not let the phone boot normally.
Now I am able to add kernels and roms to my hearts content.

I'm in a similar situation except my error comes while trying to back up my ROM.
I did root via pushing rage.bin via ADB
Then I used ODIN to put CWMrecovery.tar on the phone.
Flashed CWM via ROM Manager.
At this point I did a full backup with TiBu and did a ROM Backup via ROM Manager.
After that I froze bloatware, 'upgraded' to the Sywpe Beta and De-binged.
At about this point I realized that I had lost Haptic so I flashed the DL09 stock Kernel and that problem was solved. I thought I was good to go until I tried to do another backup via ROM Manager.
When I ran the backup I got the same error as the OP. I ended up in 2e recovery. Since I'm new to this I just chose reboot phone. I did some searching last night but all the posts I found dealt with people flashing custom ROMs and I was getting tired I called it a night with the plans to do more searching today but then I came across this post.
I reviewed my notes and saw the other thread about CWM Recover mode and I checked and I can't reboot into CWM Recovery (via ROM Man) either. I end up in Android (2e) recovery.
I saw the post above me and I need to search on these instructions so I understand this step better.
"I had that same issue until a user on another forum informed me that right after flashing cwm, replace battery and go immediately into recovery mode, do not let the phone boot normally."
I don't seem to be able to boot (up and down key = Power buttong) into any recovery.
It seems like I need to repush CWM via Odin and then reflash via Rom Man but I'm leaving for a trip tomorrow so I'll wait for some input before trying anything since the phone is functionally working.
I'm new to rooting phones so some help with this error would be appreciated.

ezas said:
I'm in a similar situation except my error comes while trying to back up my ROM.
My phone is updated OTA DL09. Then rooted via ADB. I installed ROM Manager and flashed CWM. Since then I've done the usual root stuff. I noticed that haptic was not working and I fixed that by flashing a stock DL09 kernel. I have not flashed a custom ROM.
After de binging yesterday I went todo a back up via ROM Manager and got the same error as the OP. I ended up in 2e recovery. I didn't want to really screw up my phone guessing so I just chose reboot phone.
I was going to do more searching tonight but came across this post first.
I have done two successful back ups via ROM Manager, so after reading this post I assume it's flashing the kernel that got me to this error.
I'm new to rooting phones so some help with this error would be appreciated.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I don't use custom roms on my phone but from what I'm gathering on this...
You will need to put it back to DL09 stock...
Flash CWM via Odin..
http://forum.androidcentral.com/ver...s-hacks/54659-how-rooting-your-fascinate.html
Post 4 here will tell you how to do it.
After flashing CWM you will need to put your phone into recovery right away instead of letting the normal rom load. You will then flash over another kernel using CWM and that is it.
List of kernels can be found here:
http://www.samsungfascinateforum.com/custom-roms/list-of-custom-dj05-kernels-for-verizon-fascinate/
I have never put a new kernel or rom on my phone but from what i've read this is the jist of it.

You shouldn't have to flash back to stock...
1. Download all necessary files and place on root of your SD card (nonstock kernel, update.zip)
Edit: also add in the superuser and busybox zips, and flash those after kernel (step 5) and this will give you root back if you lost it updating
2. Flash modified CWM .tar with Odin
3. Replace battery and boot directly into recovery by holding both volume buttons down while powering on
4. Once in recovery, apply update.zip to get into CWM
5. Flash new kernel
6. Reboot, enjoy

Kevin and Rob
I followed the instructions to the letter over at AndroidCentral (including flashing busybox_su) and I'm back up and running with Haptic feedback and I'm watching a ROM backup via ROM Manager as I type this. I have not done a lot of testing yet but everything seems to be working fine.
Thanks for all the help.

Kevin Gossett said:
You have to go into CWM immediately after flashing in Odin, before booting up, and flash a new kernel. DL09 breaks CWM on the stock kernel
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Just did that and after I select Install zip from SD car, the screen goes black. When I press the home button it goes back to the green list but when I select anything from there, the screen goes black again.
I have tried flashing back to stock, updating to DL09 and flashing cwm again, but same issue.

OK I am getting really tired of dealing with this. Nothing I try works. I am just going to give up on the idea of installing roms and kernels on my fascinate. I have no idea what the problem is and nobody knows either.
Thanks for all those that helped.

When in CWM the home button turns the screen off. Use the back button or power button to select

Kevin Gossett said:
When in CWM the home button turns the screen off. Use the back button or power button to select
Click to expand...
Click to collapse
Shh, I had no idea about that. I assumed since in order to get to cement recovery you had to press home key that that is what you use while in recovery. Everything works now, thank you.

ok, I'm ready to sell this damn Fascinate on Craigslist for a peanut butter sandwich. I'm miffed with getting CWM working. I have pushed the updated version onto the phone via ODIN, immediately booted into recovery (got the red recovery), and it won't mount my SD card. I had a similar problem in green recovery - it could see my SD card, but wouldn't show me all the files - including the download folder. So I couldn't flash anything. I've tried this 100 different ways. There's nothing wrong with the SD card. It reads fine in the phone, files working other than CWM. Please help. I'm stuck on stock. Have mercy.

gadgetmom88 said:
ok, I'm ready to sell this damn Fascinate on Craigslist for a peanut butter sandwich. I'm miffed with getting CWM working. I have pushed the updated version onto the phone via ODIN, immediately booted into recovery (got the red recovery), and it won't mount my SD card. I had a similar problem in green recovery - it could see my SD card, but wouldn't show me all the files - including the download folder. So I couldn't flash anything. I've tried this 100 different ways. There's nothing wrong with the SD card. It reads fine in the phone, files working other than CWM. Please help. I'm stuck on stock. Have mercy.
Click to expand...
Click to collapse
Download updated CWM at this post: http://forum.xda-developers.com/showthread.php?t=942021
Fixed my CWM problems.

That is the file I used. Relief
Tried both through Odin and loading onto phone. No dice.

That is the file I used. Relief
Tried both through Odin and loading onto phone. No dice.

the home key always turns the screen off, u have to hit search button to turn on and go back

OK, just to make sure I'm not crazy, I tried again. First I downloaded the SuperClean 2.2 update to my SD card. I re-downloaded the updated update.zip file and put it at the root of my SD card. I flashed DL09.tar.md5 via Odin to get back to stock. That completed with no problem. I flashed the EB01 radio, no problem. Flashed the updated CWM. Immediately booted into recovery (red). Attempted to Apply update.zip. Errored out. Attempted to apply update from SD card. Here's the error I'm getting:
-- Install from SDcard...
Finding update package...
E:Can't mount/dev/block/mmcblk1p1 (or dev/block/mmcblk0)
(Invalid Argument)
E: Can't mount SDCard:Update.zip
Installation aborted

gadgetmom88 said:
OK, just to make sure I'm not crazy, I tried again. First I downloaded the SuperClean 2.2 update to my SD card. I re-downloaded the updated update.zip file and put it at the root of my SD card. I flashed DL09.tar.md5 via Odin to get back to stock. That completed with no problem. I flashed the EB01 radio, no problem. Flashed the updated CWM. Immediately booted into recovery (red). Attempted to Apply update.zip. Errored out. Attempted to apply update from SD card. Here's the error I'm getting:
-- Install from SDcard...
Finding update package...
E:Can't mount/dev/block/mmcblk1p1 (or dev/block/mmcblk0)
(Invalid Argument)
E: Can't mount SDCard:Update.zip
Installation aborted
Click to expand...
Click to collapse
I think I see what your issue is. The red CWM that you loaded via ODIN installs onto the phone itself. You no longer need an update.zip file containing CWM on your sdcard. As long as you have successfully booted into red CWM, your next step is to do a full wipe, and then choose the "install zip from sdcard" option. You should then be able browse your sdcard and select the zip file containing the rom.
DO NOT rename the zip file containing the rom to update.zip and then select the "apply update.zip" option, as that will definitely not work. That option expects to find the CWM recovery app in the update.zip file, and errors out if it's anything else.
Posted from my EB01 SuperClean Fascinate with Voodoo

Oh, and make sure you have the most recent new CWM file from jt1134. The post from him that had the first fixed CWM I think may have required an update.zip file, but the current, updated files in it do not. If you're not sure, download the latest one from that post for Odin, and flash it from Odin again. You will them no longer need update.zip for sure.
Posted from my EB01 SuperClean Fascinate with Voodoo

Roblovesbox said:
I don't use custom roms on my phone but from what I'm gathering on this...
You will need to put it back to DL09 stock...
Flash CWM via Odin..
http://forum.androidcentral.com/ver...s-hacks/54659-how-rooting-your-fascinate.html
Post 4 here will tell you how to do it.
After flashing CWM you will need to put your phone into recovery right away instead of letting the normal rom load. You will then flash over another kernel using CWM and that is it.
List of kernels can be found here:
http://www.samsungfascinateforum.com/custom-roms/list-of-custom-dj05-kernels-for-verizon-fascinate/
I have never put a new kernel or rom on my phone but from what i've read this is the jist of it.
Click to expand...
Click to collapse
Awesome, thanks for the links.

Help! Might have messed my phone up

LOL i was about to say i have a fascinate, but it would be redundant because I am posting in a Fascinate forum.
Hi guys, first post, thought I would post first about something not help related, but my phone is messed up.
I rooted my phone with 1 click root from android central, then i flashed it using odin and backed up my rom ( i guess stock touchwiz) with CWM from rom manager. Then i installed this theme: AOSP REVOLUTION a port on androidforums the adress is /fascinate-all-things-root/251094-theme-port-aosp-revolution.html ( after androidforums obviously, i cant post links!) ) -_-
I installed it by downloading the zip, renaming it to update, and launched CWM recovery and ran apply sd update.zip. Then i rebooted my phone the verizon logo flashed for a long time then the screen went black, and when i pressed the power buton all that happened is that the 4 buttons would light up.
Can anybody help me, sorry if i pissed you off because of my uber-noobness, but i just got the phone a month ago and rooted it yesterday. I made sure i followed the direction so my phone does mess up, but something went wrong after installing that theme. Thanks a FREAKING GAGILLION if you can help!
PS Another noob move but how do I run the backup that i made? sorry for my noobness if it offends u.

If you have ClockworkMod recovery installed, you just need to boot into it and restore your backup. Shut down the phone. Hold both volume up and down and then press power. When you see the Samsung logo, release power but keep holding the volume buttons. It'll boot into standard recovery. Select apply update.zip and it'll boot you into Clockwork. Should be easy to figure out how to restore from there.
If this doesn't work, then you don't have clockwork installed, or installed correctly. There should be a recent post on installing a new red clockwork. Follow that and then follow the instructions above except for applying update.zip. The new red clockwork boots directly, without going through the stock blue recovery first.
Alternately, there are various all-in-one Odin packages floating around here that will return you pretty much back to stock.

The problem you have here is that you flashed a theme that is made specifically for a the asop Rom. So the thing to do is download another Rom, place on root of sd card, boot into recovery (hold both volume keys and power until samsung logo flashes twice), wipe your data and cache, flash rom and reboot. I'm assuming you have updated to dl09 so you want a dl09 rom. here is a suggestion http://forum.xda-developers.com/showthread.php?t=894126, just download system rom part, ignore the odin stuff. hope this helps

lordshark12 said:
I installed it by downloading the zip, renaming it to update, and launched CWM recovery and ran apply sd update.zip.
Click to expand...
Click to collapse
This was also a mistake. On this device CWM depends on there being a cwm update.zip on the root of you sd card. To flash a rom/kernel/theme on this device you leave it alone and placed anywhere on the card. When booted in to cwm you use the "install zip from sdcard" option.
good day.

Yes LordShark,
As mentioned above, you do not rename the file at all. You can call it "umpty-Squat-Rom-Of-The_gods.zip or whatever you want, you boot into the CWM and as pointed out above, you will choose install zip from card and you will navigate to that umpty-squat that you downloaded to the phone.
So pull your SD card out and download a ROM and place it in the SD Card in a folder you like, I personally just use the default location od SD CARD / CLOCKWORKMOD / DOWNLOAD and store all my ROMs and stuff in that folder.
Hope this helps. Do not get too excited, your not ubber borked.... even if you are in a total panic you can follow the Adrynalyne ODIN back to bone stock DI01 post and in not to long you will up and running.

chopper the dog said:
This was also a mistake. On this device CWM depends on there being a cwm update.zip on the root of you sd card. To flash a rom/kernel/theme on this device you leave it alone and placed anywhere on the card. When booted in to cwm you use the "install zip from sdcard" option.
good day.
Click to expand...
Click to collapse
Thanks for the info!

[A] Bootloop after flashing a ROM via 3.0.0.5 Recovery image.

What you did .. .. ..
Okay so you've rooted your newly bought MyTouch4G, and you've made sure that s=off and you've flashed Clockwork ROM manager's recovery image that you got from the market. That is all the correct order. But when you flashed a ROM you got stuck in a bootloop.
Am i screwed???
Don't worry you are just in a "soft brick mode", or "limp mode" if you will.
What happened? Why is it doing this?
The Image that you downloaded and installed 3.0.0.5 is for 2.3 (Gingerbread) based ROMs only. [n3rd note] these are ext4 style ROMS. They act and store information differently than 2.2 which are Ext3 ROMs[/n3rd note].
This could also be caused by trying to flash a 2.3 using a older 2.x.x.x version of the Recovery Image. Those will only support the Ext3 style ROMs, which are FroYo (2.2) based ROM.
Okay what do i need to do to fix it, there are two methods.
This is Method one it's the older version.
You must use this method if you do not have the engineering screen
If you are using the 3.0.0.5 Recovery image
To fix your problem you need to flash any 2.3 based ROM, for time sake i will recommend Cyanogen(mod). Link to Cyanogen(mod)'s CM7RC4. While you are there you need to also store the G/Apps.
If you are using the 2.x.x.x Recovery Image
To fix your problem you need to flash any 2.2 based ROM, for time sake i will recommend RoyalGlacier Thread can be found here
- Question: How do i find out what Recovery image i am using
- Answer: Boot the phone into the recovery mode. We'll touch on that in a little bit
Now when you download both of those files you also need to store them to SDCard.
NOTE: If you are using 2.x.x.x and going to flash RoyalGlacier you will not need the g/apps. They have included this in their ROM, and MAKE sure to follow their specific directions for installing the ROM.
- Question: Now how in the world i am going to do that since my phone is in bootloop.
Answer:
Two ways one can do that
1) use a SDcard reader and just plug the card into a main USB port.
2) Mount the SDCard in the phone via the Recovery Image. *** i'd recommend this method since you are going to need to be in recovery anyway ***
Pull the battery from the phone an put it back in, then put the back on the phone. turn the phone on holding the power button along with the volume down rocker button. That will boot the phone into the HBoot (Engineering) Screen. From there you will see an option that says "recovery" [this is what i mentioned earlier, about the different versions] use the volume rocker to select it, then tap the power button to select it. The phone will reboot into what is called the recovery image. From there you will select "mount" then USB. That will mount the SDCard to the Computer.
If you are using the 3.0.0.5 Recovery image
Once you have move Cyanogen(mod) and the g/apps to the SD card unmount the SDCard.
Then navigate to "wipe data/factory reset" you will want to wipe the phone. That will format everything to a fashion that can be written over w/o problems.
Then navigate to "install .zip from sdcard" > " choose .zip " > then flash the main Cyanogen(mod) ROM. Then do the same but flash the g/apps that you downloaded.
Once those are done you can re-boot the phone. That will boot you into cyanogen.
If you are using the 2.x.x.x Recovery image
Please use the link i supplied above to get that ROM up and running once it is done, according to their instructions come back here.
Now i understand that may or may not want Cyanogen nor RoyalGlacier on your phone. Well take care of that
What can i do to prevent this from Happening again?
Once you are up and running (make sure to log into your Google Account) go to the market and download Clockwork ROM manager again, and re-flash the recovery image.
Once you are done with that i HIGHLY suggest upgrading to the newest 3.0.0.6 Recovery image. You can do that one of two ways.
one way is to flash True_Blues method for installing 3.0.0.6 recovery image. Use this thread..
This is the way that i would personally recommend.
The second way is download the 3.0.0.6 recovery image, which i've attached and flash it via the ADB commands. If you want to do it this way you do not need to download Clockwork Rom Manager, you can "just flash it". If you need help with that, if you are using Windows or Mac, see my signature for True_Blue's method on EZ ADB. If you are using Unbutu 10.10 use this This Method to get ADB running. This is the method i used to ADB running on my Linux NetBook.
Download the file that i've attached and store just the recovery image from the .zip to the SDCard, from the ADB commands type
adb shell
su
flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
More information on this process can be found here
That will flash the newest recovery image to your phone
Once you have installed the 3.0.0.6 ROM Manager you can wipe and flash ANY MyTouch4G ROM that you want. It will handle both 2.2 (ext3) and 2.3 (ext4) ROM formats.
This is the New Method - Which is a little easier.
AND YOU MUST HAVE THE ENGINEERING HBOOT
Thanks to TeeJay for inspiring this.
I am going to assume that since you have the Engineering Screen you are more familiar with what you are doing so i'll be more to the point with this walk-through.
you will need to have ADB up and running for this method.
1) Download the attached file and store just the .img to your folder from which you preform all of your ADB commands
2) plug the phone into the computer
3) boot the phone into HBoot
4) from the ADB commands change the drive to the folder where you stored the recovery image.
5) type these commands
Code:
fastboot flash recovery recovery.img
the screen should say something to the degree of
Code:
sending 'recovery' (3426 KB)... OKAY [ 1.172s]
writing 'recovery'... OKAY [ 0.797s]
finished. total time: 1.969s
6) then select "bootloader"
7) navigate to "reboot recovery"
8) flash your ROM of choice.
9) enjoy your ROM of choice.
Please feel free to use this in your signature or link people back to. If you feel i made an error in this post please PM and i'll edit it accordingly.
If this thread has helped you solve your problem please hit the "thanks" button.
THE RECOVERY IMAGE HAS BEEN UPDATED TO THE NEWEST ONE.

good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.

leo221 said:
good summary. originally when i flashed cm7 I had to search a bit to come up with what you said above. one addition, CWM lets you mount sd storage to usb so you can copy files to sdcard (say the recovery image). then update CWM 3.0.0.6 with ADB.
Click to expand...
Click to collapse
Added that method as well.

May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2

Thank you for this!! Exactly what I needed...!

austengeist said:
Thank you for this!! Exactly what I needed...!
Click to expand...
Click to collapse
Glad it helped, just make sure to hit the "Thanks" button in the first post.

dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.

option94 said:
May want to mention that the opposite could be true as well > same boot loop but from flashing 2.3 rom with recovery 2.5.1.2
Click to expand...
Click to collapse
Added.
aalsmadi1 said:
dang man you're the Q&A champ, every time i'm on this you're answering questions.
well this worked like a charm, idk why people on xda always make things more complicated than it has to be.
Click to expand...
Click to collapse
Well i work in the Imported Automotive parts. My job requires me to basically sit around and answer the phone when it rings. We have our own "call center" room. I just pick up the phone and answer question and sell parts. Like right now i'm working on a engine rebuild kit for a 1975 2Ton Mercedes Bens..... so i get some free time from time to time, and XDA is one of a few sites they allow me to visit.... BGR/ Android and Me, Android Central are the others....
I can see why some people blow up, spend +$200.00 on a phone then turn around and blow through something w/o taking the time to read something and then you get stuck in a bootloop.... i can see why people go bonkers. But slowing down and reading would solve alot of problems. Heck i've got 3 great threads in my signature that would solve alot question that one could have with a new device.

fixed my problem

Thread stuck.

Great guide!

Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?

DHSdrone said:
Same issue, except i flashed 3.0.0.6 beforehand to prevent any problems. Iced Glacier flashed okay, I just didn't care for it much. Ive wiped all the necessary parts prior to flashing as I would before flashing any roms. Ive managed to retrieve and restore a previous back (I can haz backups) so Im not stuck. I would like to be in the cool kids cyanogen club. Any ideas?
Click to expand...
Click to collapse
Meaning you want to run Cyanogen(mod)? Well jump over to their site and download the ROM of your picking; Nightlies are alpha builds, and the RC's are beta builds. I've ran both and both are extremely stable. I have links supplied in the first post. and directions for that matter. just make sure to do a nandroid backup before wiping and flashing.

Thanks ....Saved ME LIFE

Posting so I can see the "thanks" button. Doubley thanks you saved my bacon....err phone!! Hmmmm bacon!

Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!

b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
Pull the battery. Hold vol down power on them restore cm7. Then flash cwm 3.0.0.6.
Sent from my Inspire 4G using XDA Premium App

b0rnsusp3ct said:
Ok I am having one Problem PLEASE HELP!!!
When I click "wipe data/factory reset" it just shows the clockwork icon (hat and arrow) and nothing happens.
In fact, this happens with all of the options in the clockwork recovery.
I am running clockwork 3.0.0.5. I had CM7 and I did something stupid, tried flashing another ROM via rom manager....I did back up everything though.
Please tell me I am not bricked!!!
Click to expand...
Click to collapse
What button are you pressing to select the option? you should just use the trackpad.

Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!

b0rnsusp3ct said:
Loll...wow, I am such a noob i def. shouldn't be rooting or anything.
Thanks so much!
Click to expand...
Click to collapse
Why do you say that?

[Q] Continuum Kernal Issues - I think

So I got my continuum 3 weeks ago, first Droid phone. Decided to root, took me about 5 hours finally figured it out using SuperOneClick.
Wanted to check out some custom ROM's so I plugged my USB cable in and transfered the .zip file to my sd card and booted into cwr and tried to install the .zip from the sd card and rebooted, nothing was different or had changed. Did that a few times and realized that I hadn't wiped user data or cache or delvik so I did that all in the cwr and installed to .zip rom and rebooted.
This time when I rebooted a few things were different. All of my apps were in alphabetical order, the home screen was back to stock except for my background was one I had just installed. My contacts were gone (thank God I backed them up).
So I rebooted again.... hung at Samsung logo....
I had also put the Peanut Butter Jelly time kernal on my sd card out of luck I installed that and rebooted. This time everything was the same as my previous horror boot except all of my apps that were set to run on boot fc'ed and all of the other apps that I have are just icons. None of them open or they do and fc. Market will not open. My phone is a phone and a camera and the browser works.
I am very new to droid but learn quickly. I cannot post on the continuum dev threads because I am a noob. Hopefully one of the continuum devs will see this and know what to do to help.
Thanks a ton, I do not mind donating for help.

You said that you wiped user data?
That would remove all of your data, including your applications...
Your apps are toast, but your phone is not...
If you made a backup before you flashed (which you are supposed to xP) , then you can easily restore your apps then...
But if you didn't, then go back into recovery and do a full wipe... When you boot up, you should be back to the original state..
If not, then i am going to have to have you flash one of our rom zips... But i really dont think it'll come to that xP
Sent from my SCH-I400 using XDA Premium App

Recovery
I made a backup and when I try to load it it says checking for md5 sums then gives me an error that it can't mount (unmount) the "/system".
So if I go back to recovery and wipe everything and reboot that should return me back to stock??
I don't care about the apps I dled I can always get those back but I can't even open market it fc everytime, no way to re-dl it.

1. what rom have you/are trying to install?
2. how are you installing the rom? you can't just go into cwr and click "apply sdcard:update.zip". you have to go to "install zip from sdcard", then go to "choose zip from sdcard", and then find the rom you put on your sdcard and select it. make sure you're flashing the rom file, not the cwr file because they are both named "update.zip". to make sure you're flashing the right file i would put cwr in the root of your sdcard and the rom file in some random folder.
3. did you install voodoo or novoodoo? and if you correctly installed either, the boot up video should be messed up when you turn on your phone. did you make sure the peanutbutta jelly time kernel was exclusively for the continuum, and you didn't accidently flash a kernel for some other phone?
4. if you truly did install the correct peanutbutta jelly time kernel, i would recommend flashing back to the original kernel (let me know if you need it). if you installed voodoo, you'll need to put a blank file in /sdcard/voodoo/ named "disable-lagfix"

ntien said:
1. what rom have you/are trying to install?
2. how are you installing the rom? you can't just go into cwr and click "apply sdcard:update.zip". you have to go to "install zip from sdcard", then go to "choose zip from sdcard", and then find the rom you put on your sdcard and select it. make sure you're flashing the rom file, not the cwr file because they are both named "update.zip". to make sure you're flashing the right file i would put cwr in the root of your sdcard and the rom file in some random folder.
3. did you install voodoo or novoodoo? and if you correctly installed either, the boot up video should be messed up when you turn on your phone. did you make sure the peanutbutta jelly time kernel was exclusively for the continuum, and you didn't accidently flash a kernel for some other phone?
4. if you truly did install the correct peanutbutta jelly time kernel, i would recommend flashing back to the original kernel (let me know if you need it). if you installed voodoo, you'll need to put a blank file in /sdcard/voodoo/ named "disable-lagfix"
Click to expand...
Click to collapse
1. I was trying to install the super clean
2. I was trying to install from zip on sd card then selecting the sc_cont.zip I believe it is called
3. I had both voodoo and no voodoo, with no voodoo I had no bootani's with voodoo it was the factory bootani but distorted.
4. I just tried the original kernal and system from http://forum.xda-developers.com/showthread.php?t=967165 and now my phone's bootani is stock stock but after the verizon screen my phone turns off.
So now my phone is bricked again. I tried going back to pbj (peanut butta jelly) voodoo kernal and the same distorted bootani comes up then the phone turns off. I can get into crm but that appears to be all I can do.
Is there a different place to get the stock kernal or is the link I posted the right one.
I would really like my phone back to stock and root again. But first things first... get it to boot to a phone.
Forgot something, when I attempt to boot into crm the lady comes on and says "Convert system partition, system is not available" Then it sits and the weird lines from voodoo and the bootani from voodoo. If i could get into "phone" I could create the file you are saying but the phone turns off after that. Back to boot like a loop.

Instead of creating a super large thread, how about you just hop into the IRC, and i will try my best... i have a couple ideas to try...
#Samsung-Continuum
http://webchat.freenode.net/

Thank you so much to trail blazer
Basically I had the wrong update.zip installed and couldnt even mount the usb to cpu to do anything about it. Luckily i had a msd to sd adapter and was able to switch out my update.zip to the correct cwm. Thank you so much blazer and imnuts!!! you guys are my heroes.