i have a hd2 that wont turn on,only when i connect d charger it comes on then it wont boot pass the white screen because it turn off,then comes back on n the same thing happen over n over.i manage 2 do a hard reset but it didnt help.also i tried holding down d vol key n the end key n i see a red,green,blue n white screen that display:
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
please help me
so what were you doing / installing before this happened? anything?
Related
I am new to all this and I have done some searches, just not sure what everything is all the time. So here is my situation. I have an activation code everything was working great other than in call volume, ringer volume and alarm volume. Some reception issues as well but i don't know if that is related. I have a real hard time getting into the screen to flash by holding volume down button and green button. 98% of the time it won't work. now i have the schubert flash. Not sure what the advantages of this one is but my live services do not work. I get the check back message like i did before i had an activation code. So what would be the best ROM that would take care of my volume issues(which i fixed with registry, IDK why i messed with it) and give me live services?
When i get int 4 color screen when i hold down and shut the phone off: my phone reads:
PB8110 HX-B3
SPL-2.08 HSPL 8G XE
0x05
hspl 0X50
When i do it from turning it on it reads:
LEO1000 HX-B3 (2k)
NSPL0.96.255.0
MicroP(LED) 0x05
MicroP(touch) NA
SD NONE
Partition INFO-v211v413
Maybe this can help with my problems?
Thanks in advance
mimmoc10 said:
I am new to all this and I have done some searches, just not sure what everything is all the time. So here is my situation. I have an activation code everything was working great other than in call volume, ringer volume and alarm volume. Some reception issues as well but i don't know if that is related. I have a real hard time getting into the screen to flash by holding volume down button and green button. 98% of the time it won't work. now i have the schubert flash. Not sure what the advantages of this one is but my live services do not work. I get the check back message like i did before i had an activation code. So what would be the best ROM that would take care of my volume issues(which i fixed with registry, IDK why i messed with it) and give me live services?
When i get int 4 color screen when i hold down and shut the phone off: my phone reads:
PB8110 HX-B3
SPL-2.08 HSPL 8G XE
0x05
hspl 0X50
When i do it from turning it on it reads:
LEO1000 HX-B3 (2k)
NSPL0.96.255.0
MicroP(LED) 0x05
MicroP(touch) NA
SD NONE
Partition INFO-v211v413
Maybe this can help with my problems?
Thanks in advance
Click to expand...
Click to collapse
THIS IS CRAZY WHY YOU DOUBLE POST ?????
I am new to all this and I have done some searches, just not sure what everything is all the time. So here is my situation. I have an activation code everything was working great other than in call volume, ringer volume and alarm volume. Some reception issues as well but i don't know if that is related. I have a real hard time getting into the screen to flash by holding volume down button and green button. 98% of the time it won't work. now i have the schubert flash. Not sure what the advantages of this one is but my live services do not work. I get the check back message like i did before i had an activation code. So what would be the best ROM that would take care of my volume issues(which i fixed with registry, IDK why i messed with it) and give me live services?
When i get int 4 color screen when i hold down and shut the phone off: my phone reads:
PB8110 HX-B3
SPL-2.08 HSPL 8G XE
0x05
hspl 0X50
When i do it from turning it on it reads:
LEO1000 HX-B3 (2k)
NSPL0.96.255.0
MicroP(LED) 0x05
MicroP(touch) NA
SD NONE
Partition INFO-v211v413
Maybe this can help with my problems?
Thanks in advance
I left a thread about this in the android section but now I realize that this is probably the better place to do it (I need to send my phone back and get a new one on warranty):
Can any one tell me is this the stock info on a t-mobile htc hd2 stock:
on the boot (three color red green and blue) screen it says:
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
and on the ohter boot screen with the three numbers it says
R 2.15.50.14
G 15.42.50.11u
D 3.14.04666 8g
Will they be able to tell I messed with the phone given this info? In other words can I get my warranty with this?
Thanks in advance
Hello I have problems with starting my phone I am getting a Red Green Blue screen with :
PB81100 HX-BC
SPL-1.66.0000
Micro(Led) 0x05
MicroP(TOUCH) 0x30
What should I do I am new at Android!
Playstation2 said:
Hello I have problems with starting my phone I am getting a Red Green Blue screen with :
PB81100 HX-BC
SPL-1.66.0000
Micro(Led) 0x05
MicroP(TOUCH) 0x30
What should I do I am new at Android!
Click to expand...
Click to collapse
Its nothing to do with Android, this is the bootloader screen. It sounds like your volume down key is faulty. When you hold the volume down key down during powering on it loads bootloader.
You will have to send it away for repair or try to free teh button.
Ohh okee thanks for info!
So I definitely bricked my phone. Has to be. I try to use Task29 to start from scratch, but when "htc" pops up and has the bar of percentage, it just stays on 0%. No matter what I do. I do have Maglar (i think thats it) but when I boot up into Maglar it says
PB81120 HX-B3
SPL-2.08.0000 8G XE
MICROP(LED) 0x05
MICROP(TOUCH) 0x40
HELP.
See if you can get into bootloader mode, (by holding volume and down when device is turned off.) If you get into the tri colour screen its not bricked. Install hspl, task 29, than magdlr and u should be good to go. Good luck
Sent from my Desire HD using XDA App