Related
i recently just reset my factory reset my phone and now my phone doesn't have any 3g/data. is there anyway to re enable the data?
Go to Settings>About Phone> What does it say in modem, and kernel?
You may need to flash a new modem (i suggest KB5) idk about kernel, but you need a kernel lol.
odin back to stock
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper tar file in pit and the .pda file in pda in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Normally, i just go to settings, wireless n network, mobile networks, access point, press menu press default access point..
Or you may need to create one, just make up whatever for access point,... Then press menu again and press default access point so you'll get the default epc.tmobile.com..
Then wait 30 to a minute for the 3g icon to appear..
Hope it works..
so basicly this happen. i updated my samsung s4 and after the instalation hes gone,,, he keeps restarting at the first samsung logo screen, vibrate then resets , i tryd that volume+ menu + power button and clear chache and factory reset but it kinda did nothing
im new at this android stuff so if someone got any ideas how to help me that would be great !
sorry if there is another post on the forum here with the same problem but i didint see them ,,,
any help would be good ! thanks in advance
type if you need more info
Hi Zarg00
I had the same problem as you a few days ago! Nothing seemed to work, wheter I tried wiping the cache/dalvik chache or doing a factory reset.
With Odin I managed to get it back to life again.
Don't worry, it's easier to repair as you might think. =)
You should have your original Samsung usb cable ready.
Unbricking Samsung Galaxy S4 by Installing the Official Firmware:
If wiping the data/factory reset, and cache partition does not help you, or you are not able to boot into the Android System or ClockworkMod recovery on your Galaxy S4, you can try installing the official firmware on your phone. Read the following guide that will help you find the correct firmware for your Galaxy S4 and install it safely.
Click to expand...
Click to collapse
Unfortunatly I can't post you the link directly, because my post count isn't high enough.
But try searching on google "droidviews how to unbrick galaxy s4" and it should be the second post with the very well written tutorial.
After you are done with it, your device should work correctly again.
You will lose your recovery and root though.
Good luck and report back, if it worked! :good:
Maybe not the first thing to do but have you tried flashing in the stock rom with odin and then do the updates again?
Sincerely, Joakim
im gettin Official Firmware now, so i think XD its 1.6 gb so its gonna take a while,
i realy hope this is gonna work
In my case i even had to restore the PIT, too. But try just flashing the official firmware before that.
Yeah, downloading the firmware can take a while. You can download the newest Version [I9505XXUBMGA Jelly Bean (4.2.2)] on google drive as well.
Just delete the "_" after https: in the link -> https:_//docs.google.com/file/d/0B7DKa-PuA5IlcVY2MGtMT1ZJMHM/edit
Drive lets you download faster than hotfile.
Its the DBT version though, so you might need to change your language from german to whatever you want at the first start.
But since your galaxy is still able to boot, the chances are really good that it will work well again after you have flashed the official firmware!
im kinda stuck at this
Boot your Galaxy S4 into Android System Recovery mode: hold Volume Up+Home+Power keys together till the screen turns up and the Samsung logo blinks twice. Just as you see a green Android bot, release the Power button but keep Volume Up and Home keys pressed till you see the recovery menu (see below). In recovery mode use the volume keys to scroll and power button to select options:
Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it.
i cant go to recovery mode, i can see little blue letters in upper left corner but phone resets -.-
any hint ?
Which recovery are you using? The "official" recovery did not work very well on my device. It just crashed when I tried to wipe cache partition.
Try flashing CWM Recovery for GT-i9505 with Odin.
uhm im confuzed, can you walk me throu i kinda dont get that "odin" program
dunno what to do with that files you show me :S
Don't worry, it is not that hard. =)
I guess you already flashed the official firmware with Odin, right?
To install cwm recovery follow these steps:
1. Make sure that your device is at least 50% charged
2. Power off your S4. To make sure that it is really off pull out the battery for half a minute and put it back in.
3. Start Odin3 on your PC.
4. Download the recovery file (link in the post I made before ^^) you should choose the one i marked with red in the screenshot below.
5. Okay, you have the recovery file and odin3 ready. In Odin, click the box before "PDA" and than click on "PDA" and choose the file you just downloaded. It should look like in the screenshot below (sorry, that it's in german, but I thought it might help you )
6. Now we have to prepare your Galaxy S4. Press and hold "Volume down" + "home" and then press "Power" to get into download mode. It will ask you, if you are sure. Just press "volume up" once.
7. Connect your phone to your PC with the USB Cable. Odin should recognize your device. Just make sure, that the ID:COM port turns blue.
8. Click on start and wait till your device reboots and Odin shows you the PASS! message. You can disconnect your S4 from the PC now.
9. And now try to get into recovery mode again by pressing "volume up" + "home" + "power". Sometimes you don't even have to press the home button, just try what works best for you. Release the power button as soon as you see the logo, but keep the "volume up" button pressed until you are in recovery mode.
If you can enter recovery mode again (and i'm crossing my fingers, that you can ^^) just continue with the tutorial from droidviews and wipe data/factory reset and after that cache partition.
I hope that helps! :fingers-crossed:
this works, thanks,
i did "Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
well that whas kinda the last thing i needed to do, but its still the same,
he shows me Samsung galaxy s4 gt - i9505 logo and keeps reseting ,,,
so this didint fix my problem
Damn.
Did you also flash the PIT files? I would do the whole process again, but this time follow "How to unbrick S4 by Flashing Stock Firmware and PIT File".
If that doesn't work as well, I guess it is some hardware error. The good thing is, that you did not lose any warranties by following the tutorials and you can return your phone to the shop and claim a repair.
so basicly i did all over again its still the same phone keeps resetting
but in recovery mode i noticed after i do this
"Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
when i want to reboot it says " Root access is missing. Root device ? "
basicly there are lots of
NO
NO
NO
NO
YES - Root device (/system/xbin/su)
i hope this helps you so you can help me :S
Zarg00 said:
so basicly i did all over again its still the same phone keeps resetting
but in recovery mode i noticed after i do this
"Go to “wipe data/factory reset” option and wipe it.
Then “wipe cache partition”.
Finally, go to “reboot system now” and select it."
when i want to reboot it says " Root access is missing. Root device ? "
basicly there are lots of
NO
NO
NO
NO
YES - Root device (/system/xbin/su)
i hope this helps you so you can help me :S
Click to expand...
Click to collapse
uhm i dont realy know what i did, but its working now
i can use my phone
maybe the problem whas my battery whas on 30 % ? since i pluged it in a charger and pressed the power button and now it works
gonna test it for a while and post here again if all works fine
aaaaannnnnddd nothing, it resets
im back at the beginning ,,,, he whas working fine for about 10 min then he just shuts down and resets all the time ,,,,
Hey Zarg00 =)
Did you restore the PIT file as well this time? You phone shows a really strange behavior. O__O
I have found a thread here, which might hopefully help you [Guide] How to unbrick your phone.
Sometimes flashing files with Odin won't work the first time and you have to try it multiple times.
If that all doesn't work, then I guess it is not a software but an hardware issue. :/
well i made it work, and its fine now, but it restarts sometimes ,,,
also Kies cant see my phone, its stuck on connecting ,,,, i can browse it throu My Computer i see it there
Cool! It finally works now? Did you do anything different or just the steps from the tutorial again?
Kies never really worked for me. Sometimes it didn't recognized my device at all.
Chelonee said:
Cool! It finally works now? Did you do anything different or just the steps from the tutorial again?
Kies never really worked for me. Sometimes it didn't recognized my device at all.
Click to expand...
Click to collapse
well i did all like you showed me, but this still isint my phone
he keeps resettin after i install any new application
i need to take batery out, leave him alone for 5 min then i put my batery inside and he works,,,
but i still think hes broken ,,,
DOWNLOAD this full package firmware and flash it.
cz4r3n said:
DOWNLOAD this full package firmware and flash it.
Click to expand...
Click to collapse
done, and phone is not resetting anymore, but now i got a black screen and it says "Samsung Knox error" the screen is all black , i can only see and use that status bar on the top of the screen, where is the time and notifications, what to do next ?
anyway i can talk and send msgs but only if someone sends / calls me first ,,,
now i have a new problem :cyclops:
I have a galaxy s4 9505.
I have rooted GOOGLE EDITION 4.4.4 by Danvdh, Kryten2k35 & Ktoonsez
I attempted various (failed) back up attempts that fill the the interal memory with hidden files
--> I want to restore my phone to the stock Samsung installation and remove EVERYTHING else. A complete factory reset. Then I'll decide where to take it from there, but right now my phone is full of unwanted data files and an android installation that doesn't work very well.
My questions:
How do i wipe everything including hidden files?
is there a guide that fits my problem?
are there things i need to be careful/worry about?
It's Easy !
It's Easy All What you get to do is :
Turn the phone off.
Press and hold VOLUME UP and Home (middle) button
Press Power until the phone vibrate
Wait until you see the Android logo then release all the buttons.
Select Wipe data/Factory reset with VOLUME DOWN, press Power (right hand-side)
Select YES -- delete all user data with VOLUME DOWN and then press Power
After format, press Power again to reboot phone. (select reboot system now)
Thx guys
I'm using Philz touch 6 clockwork mod bootloader so not the original boot loader. Don't i need to load a rom or something to return it to the samsung rom-version? I isn't that rom-data gone or is it hidden somewhere as a backup restore??
factory reset + load 2.½gb original image w. Odin 1.85
I finally did it. The two replies to my post here were as I expected WRONG. I did need a factory reset, but I also needed to find the original samsung image for northern european countries and load it with odin 1.85.
##Things you need##
USB cable
S4 GT-i9505
4.4.2 firmware
I9505_XXUAME2 modem
regionlockaway
##################
1.Download stock firmware 4.4.2 (firmware found on sammobile)
2.Download Laest Odin and install samsung drivers
3.Power off phone
4.Hold power button + volume down, select volume up to enter download mode
5.Once you see the green Android and says Now downloading..you are good to go
6.plug in usb cable and connect your phone..see step 16 and 17 to see how to enter developer mode.
7.Launch Odin and make sure choose Run as administartor
8.Odin will say Added! on ur left..also you will see which com its using..can be for example COM3 or COM4...point is, its not the same for every computer
9.the latest ODin has BL, AP, CP etc
10.now lets do this! Choose AP and Load ur stock 4.4.2 firmware, odin will sometime say not responding but dont worry after a moment it will finish loading..check the logs on the left. also make sure autoreboot is check and reset time..these option are checked by default. DONOT TICK OTHER OPTIONS..JUST DONT.
11.Once loaded, click Start and Odin on top left will show you a progress bar on how much until done..this will take sometime..sit back and relax
12.once done, your phone will restart and start loading the new firmware, if stuck on samsung bootlogo continue to step 13 if not skip to step 15
13.Remove your battery and put it back on and hold power button + volume up to enter recovery mode.
14.Once you see recovery mode, scroll down using volume down, select reset cache/factory setting, press power button to select, scroll down again on YES an click power button to select, once done, go to main menu and select reboot system
15. Ok wait patiently for ur phone to load the firmware, once loaded..skip the user setting as much as possible..like setting user acc,time and date etc...
16.go to settings, more, scroll down, select about device,check os version..should be 4.4.2
17. now scroll down more and see build number..tap on that a few times until its says ur now developer.
18.tap back, in settings menu, you will now see developer options, enter developer options and check usb debugging
19.Now the tricky part, we will now change the baseband to get several option unlock in the service menu..mainly to get this option PERSO SHA256 OFF in the service menu. if most of u have upgraded to 5.01 firmware and tried every unlock method..but not working..This method works 100%.
20.Assuming all drivers working perfecty, usb debugging On, turn phone off and go to download mode, hold power button+volume down, select volume up to continue
21.now ur in download mode again, Download I9505XXUAME2 which can be found in this link http://forum.xda-developers.com/showthread.php?t=2192025 and extract the zip file to a folder.
22.Launch ODin (run as ADministrator), make sure ur phone is added!, select CP and select I9505_XXUAME2_MODEM.tar.md5 and click start,when finished ur phone will restart
23. Almost there! , so now go to settings,more, about device,check baseband, should say I9505XXUAME2, if so ur good to go
24.now u can check this http://gs4.wonderhowto.com/how-to/c...y-s4-so-you-can-use-another-sim-card-0148110/ to see how to get to service menu
25.i will tell u anyways..go to dialer, type *#0011#, touch menu on phone, select key input, type 1 (sometimes i type Q0 if 1 doesnt work), press ok, press menu again, press back in menu..wait until u get the service menu, go debug screen, phone control, network lock, and there it is! the damn PERSO SHA256 OFF.click on that, u can continue to follow the guide in the link with photos where its says go back to main menu and go COMMOn, nv rebuild, restore backup..do that too.
26.now ur phone will restart and in my case it didnt unlock my carrier. what a bummer but fear not we shall continue..
27. Now you have to root this phone, iv downloaded kingoroot for this..use whatever method u like to root ur phone.
28.now assuming ur phone is rooted, download regionlockaway follow this link http://forum.xda-developers.com/showthread.php?t=2470551 or http://forum.xda-developers.com/attachment.php?attachmentid=2370437&d=1383564029
29.now copy regionlock to ur phone using usb cable..should be easy ,use file manager on ur phone, install it, requires root access..click accept, launch the app, click on regionlock
30.it will say updating modem, finally it will show patch seems to be successful.blah blah blah ..choose reboot now and thats it your done!
31.if u dont see ur carrier, go to settings, connections tab, more networks, mobile networks..choose ur carrier, wait for it to register and finally ur done
Note:u can update ur modem to new version because the unlock is permanent, changing firmware or baseband will not lock the phone ENJOY
nuback said:
##Things you need##
USB cable
S4 GT-i9505
4.4.2 firmware
I9505_XXUAME2 modem
regionlockaway
##################
1.Download stock firmware 4.4.2 (firmware found on sammobile)
2.Download Laest Odin and install samsung drivers
3.Power off phone
4.Hold power button + volume down, select volume up to enter download mode
5.Once you see the green Android and says Now downloading..you are good to go
6.plug in usb cable and connect your phone..see step 16 and 17 to see how to enter developer mode.
7.Launch Odin and make sure choose Run as administartor
8.Odin will say Added! on ur left..also you will see which com its using..can be for example COM3 or COM4...point is, its not the same for every computer
9.the latest ODin has BL, AP, CP etc
10.now lets do this! Choose AP and Load ur stock 4.4.2 firmware, odin will sometime say not responding but dont worry after a moment it will finish loading..check the logs on the left. also make sure autoreboot is check and reset time..these option are checked by default. DONOT TICK OTHER OPTIONS..JUST DONT.
11.Once loaded, click Start and Odin on top left will show you a progress bar on how much until done..this will take sometime..sit back and relax
12.once done, your phone will restart and start loading the new firmware, if stuck on samsung bootlogo continue to step 13 if not skip to step 15
13.Remove your battery and put it back on and hold power button + volume up to enter recovery mode.
14.Once you see recovery mode, scroll down using volume down, select reset cache/factory setting, press power button to select, scroll down again on YES an click power button to select, once done, go to main menu and select reboot system
15. Ok wait patiently for ur phone to load the firmware, once loaded..skip the user setting as much as possible..like setting user acc,time and date etc...
16.go to settings, more, scroll down, select about device,check os version..should be 4.4.2
17. now scroll down more and see build number..tap on that a few times until its says ur now developer.
18.tap back, in settings menu, you will now see developer options, enter developer options and check usb debugging
19.Now the tricky part, we will now change the baseband to get several option unlock in the service menu..mainly to get this option PERSO SHA256 OFF in the service menu. if most of u have upgraded to 5.01 firmware and tried every unlock method..but not working..This method works 100%.
20.Assuming all drivers working perfecty, usb debugging On, turn phone off and go to download mode, hold power button+volume down, select volume up to continue
21.now ur in download mode again, Download I9505XXUAME2 which can be found in this link http://forum.xda-developers.com/showthread.php?t=2192025 and extract the zip file to a folder.
22.Launch ODin (run as ADministrator), make sure ur phone is added!, select CP and select I9505_XXUAME2_MODEM.tar.md5 and click start,when finished ur phone will restart
23. Almost there! , so now go to settings,more, about device,check baseband, should say I9505XXUAME2, if so ur good to go
24.now u can check this http://gs4.wonderhowto.com/how-to/c...y-s4-so-you-can-use-another-sim-card-0148110/ to see how to get to service menu
25.i will tell u anyways..go to dialer, type *#0011#, touch menu on phone, select key input, type 1 (sometimes i type Q0 if 1 doesnt work), press ok, press menu again, press back in menu..wait until u get the service menu, go debug screen, phone control, network lock, and there it is! the damn PERSO SHA256 OFF.click on that, u can continue to follow the guide in the link with photos where its says go back to main menu and go COMMOn, nv rebuild, restore backup..do that too.
26.now ur phone will restart and in my case it didnt unlock my carrier. what a bummer but fear not we shall continue..
27. Now you have to root this phone, iv downloaded kingoroot for this..use whatever method u like to root ur phone.
28.now assuming ur phone is rooted, download regionlockaway follow this link http://forum.xda-developers.com/showthread.php?t=2470551 or http://forum.xda-developers.com/attachment.php?attachmentid=2370437&d=1383564029
29.now copy regionlock to ur phone using usb cable..should be easy ,use file manager on ur phone, install it, requires root access..click accept, launch the app, click on regionlock
30.it will say updating modem, finally it will show patch seems to be successful.blah blah blah ..choose reboot now and thats it your done!
31.if u dont see ur carrier, go to settings, connections tab, more networks, mobile networks..choose ur carrier, wait for it to register and finally ur done
Note:u can update ur modem to new version because the unlock is permanent, changing firmware or baseband will not lock the phone ENJOY
Click to expand...
Click to collapse
Please the link u provided for the modem is "rar" instead of "tar" are they the same thing?
Sent from my GT-I9300 using XDA-Developers mobile app
hi again hope to get help from you all i am stuck on MID csc but i need to go back to XFA i tried flashing xfa an eve tried this
1. Run and configure Odin. Do NOT check “Re-Partition” and “Auto Reboot” check boxes.
2. Load the stock firmware in the PDA button.
3. Set the phone in download mode (Volume Down+Home+Power button). Then connect the phone in your computer.
4. Hit the “Start” button and then wait.
5. Once the flashing successfully completed. Do NOT let it reboot into the normal mode.
6. Reboot into recovery mode (Volume Up+Home+Power button).
7. See if it’s applying the CSC file then wait until it finishes and reboot.
8. If you do not see the CSC installation, instead choose the “Wipe data/Factory reset”. Then repeat flashing the stock firmware. You may then achieved the CSC code flashing the stock firmware on the second attempt.
10. Confirm the CSC code by using Kies 3 or by downloading Phone INFO ★Samsung★ and see if the CSC code has changed.
and this
This worked just fine for me & I am confident about that this will work on your device too.
But remember this may can do a "FACTORY RESET",
So backup your data firstfi
Open your phone’s dialer and type the following code with your device IMEI number:
*#272*Phone’s IMEI Here#
No software required
and no luck i even tried flashing just the modem also no luck
never mind i got it fixed so if any one want help i will help but it is a long thing to do but at least it worked for me
biebie29 said:
hi again hope to get help from you all i am stuck on MID csc but i need to go back to XFA...
never mind i got it fixed so if any one want help i will help but it is a long thing to do but at least it worked for me
Click to expand...
Click to collapse
Hi @biebie29. I have a similar issue for an S7 Edge. Currently on XSG CSC but want to go back to my own country code XFA.
Would very much like to know what you did as I can't find an answer to my problem.