Related
Hi there,
I am trying to change the IMEI of my telephone, as the compagny I work only accepts calls from particular IMEI's. Otherwise you connect to the helpdesk.
We get our phones from the company (I now have a w800i)
There is a guy who bought a new phone, and swapped his IMEI, and now he can use it.
I want the same with my QTEK s200. After a little research I found out that I have got a G3, which is good.
So I downloaded the aWizard to CID unlock my phone.
Unfortunately, I get a memory write error.
Here is the output of the program:
Code:
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
[11:52:54,03] MachinaGod lokiwiz start
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=80: c01bfbc4 - 194d4405ca5a3c83
Key idx: 80
olddata: 1dc8c1d25668fee6cf1fe68e3909881c9a755d0b48d3d48455d9139a00635f1c
newdata: a6c5603436eb0021172bf3cc57b1a8bd7ae6cc16f96812e97ae6cc16f96812e9
newsum=f4044942 encsum=0dabbbed53ee8789
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072745
[11:53:06,80] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to restore your device if anything goes wrong.
* Press [Enter] to continue
Its on the 6'th last line.
Next up I download iWizard, I open it, and the program reads out the IMEI succesfull, but it doesn't write.
What to do? Can anyone help me out?
If I didn't supply enough info, do not hesitate to ask for more.
I guess a real solution would be not to change your IMEI but to ask your company's administrators to accept your actual IMEI ?
I'm not responsible for what might happen on your phone if you choose to dial any of these!
These are the codes that work on the standard phone dialler app on the Orange San Francisco, but I'm pretty sure they'll be almost identical on other models that we collectively know as "ZTE Blade". Known small differences (in texts) are down to whether the firmware expects to be running on an OLED or TFT display, and whether you've deleted seemingly unused apps like ChiperTest.apk, fcctest.apk and QcNvTest.apk. Most are prefixed with "*983*", which is "*ZTE*" in phone letters -- I've added a mnemonic for the other part where I think it's obvious (feel free to suggest better ones!).
"Automatic Inspection" runs through the basic tests automatically (usually you need press a button to move on to the next bit -- don't get thrown by any blank colour test screens!). There are a number of interesting items for developers, with hardware info and other goodies. If any of the descriptions don't make the function obvious then it's either poorly written or I don't know exactly what it does (I'll happily update this if others can explain better).
If the code has been recognised by the dialler then it will react immediately when you enter the final "#". If nothing happens when you've done that, don't press Dial!
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dial Mnemonic Operation
*983*0# Menu (20:Battery/OLED/Back Light/Vibrator/Ringer/LED/Key/OLED off/SD/BT address/Radio Info/Memory/TouchPaint Test/Audio Loop/FM/Camera/GPS Test/IMEI/IMSI)
*983*3640*01# IMSI
*983*25# Battery Info[/COLOR]
*983*31# OLED Test
*983*26# Backlight Test
*983*850# Radio Test 0
*983*86# Vibrator & LED Test
*983*84# Ringer Test
*983*07*01# Headset Test
*983*07*02# Key Test
*983*3470# LCD Test
*983*81# SD Test
*983*890# -
*983*26*# Radio Test 1
*#06# IMEI
*983*27274# CRASH Reboot
*#08# Test Flag [Note: requires QcNvTest.apk in /system/app]
*#09***# BT Test
*983*1275# _ASK Dev Info
*983*7# Menu (4:Version/IMEI/IMSI/BT address)
*983*3640# DOH+ Phone Info (inc ping test, radio on/off)
*983*636# MEM Memory Test
*983*28# BT Emode BT Test
*983*477# GPS GPS Test
*983*21# Audio Loop Test
*983*70# Automatic Inspection
*#18# LED Test
*#19# TouchPaint Test
*983*36# FM FM Test
*983*57# Factory Reset
*983*473# Camera
*#23# Video Camera
*983*10# Delete (Touchscreeen) Calibration File
*#25# FM Test
*983*2726# SIM Contacts Op 1
*983*37# SIM Contacts Op 2
*983*6726# SIM Contacts Op 3
*983*154# "test" Menu (12:Self-starting/Software
Version/Hardware Version/PSN/Test Flag/[Completed]/Board Serial/Bluetooth
Address/SMS security/SMS Registration Status/Flash Type/PRL Version/Serial Configuration)
*983*07# Menu (9LED/Ringer/Vibrator/Key Test/Audio Loop/Headset Test/FM/Camera/SD)
*983*5182# Dev Info
*983*7469# SHOW Automatic Inspection
*#26***# Sensor Test
*983*7936# QXDM Save Qxdm in log system
*987*0# Menu (4roduce Information[->"test" Menu]/Automatic Inspection/Factory data reset/Battery information)
*#27***# Compass Test
*983*87274# USBSI USB Switch Test
*983*06# BT Test
*983*564738# LOGSET LOG Set (inc sys_rw)
*983*93# FCC Test [Note: requires fcctest.apk in /system/app]
*983*2377# CFQP Call Forwarding Query with PowerOn
*983*24474636# CHIPINFO Chiper Test (chip info) [Note: requires
ChiperTest.apk in /system/app]
*983*29873283# AXUPDATE Touchscreen Updater
*983*73564# SDLOG SD Log
Note: the above are for the standard ROM (well, apps) running 2.1. The current Froyo ROM (with standard dialler, etc.) does not have the Touchscreen Updater, but adds:
Dial Operation
*987*123456# DM Test
IN modaco
Hello, what code shude I use to know if my SF is TFT or Amoled?
Regards!
Check the build number in Settings>About Phone. AMOLED ends in 05, LCD ends in 08. IIRC all white SF models are 08 and most grey are 05 (unless its a newer unit which will likely be 08).
Thank´s man.
Mine is 01. What that means?
Looking at the screen characteristics it seems like LCD.
Thanks man. great post
Really nice. Works on Boost Mobile Warp Sync N9515.
Would you happen to have a code that forces prompt for unlock? (Changing sim cards doesn't trigger anything)
same here... up for this....
No Boost Mobile ZTE Warp Sync N9515 Unlock Screen
chinnyss said:
same here... up for this....
Click to expand...
Click to collapse
I think unlocking the Boost Mobile is a lost cause. I've tried several other sims and the only codes I've found to show the unlock menu don't work:
1) Alright then please remove the SIM card and try this code ###825*09#,
2) Got the prompt for code? Please enter the code you received,
3) Failed above, try *983*8284# to access the Unlock Menu,
4) Failed above, finally try *983*865625# to access the Unlock Menu.
zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code
You the MAN! THA KS.
kelvinpacquette said:
zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code
Click to expand...
Click to collapse
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing
techeligible3322 said:
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing
Click to expand...
Click to collapse
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk
Alright
paigesdavis1996 said:
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
How did you enter / enable adb? I have a 971 and the 2nd code from your site doesn't work, I am able to enable eng. mode
I also tried the connect to computer in control panel and that doesn't do anything either.
Frp locked
Trick
techeligible3322 said:
Thank you for your reply
Click to expand...
Click to collapse
This worked for me and I have the ZTE z blade max thank you
Has this been proven to root the phone yet ? Please leave feedback .
Good News
#Starlord37# said:
This worked for me and I have the ZTE z blade max thank you
Click to expand...
Click to collapse
That's very good to know you are welcome
I haven't had a chance to try it fully yet as I have been trying to root my girlfriends Moto e4 with magisk which I will probably have done by the end of the night and then I plan to tackle my z982 will keep you posted though
Hello. I've been getting a lot of emails on how to do that and i thought i should make a thread here.
Now you got to have the original box in which there is the imei written. I don't take any credit for this guide as i didn't write it but i found it somewhere here but it doesn't exist anymore. I'm not responsible for any damage may happen to your phone. I did it several times after flashing official 2.3.5.
It has worked fine with my IDEOS X5 U8800.
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk...012_09_12.html
c. Software for restore
http://www.2shared.com/file/xBxUOnPz/DFS.html
2. Enable debugging by USB in the settings.
In call type * # * # 2846579 # * # * http://postimage.org/image/tnj4s2dyj/
3. Go to ProjectMenu -> Background settings -> Usb port settings put the Manufacture mode and corfim.
4. Go again to ProjectMenu -> Background settings -> Qualcomm backround open settings put the background open. Password 0 and corfim.
5. Go again to ProjectMenu -> Background settings -> Log setting -> Log switch put log on and corfim.
6. Now conect your phone to pc and install the drivers.
You must see this at your device manager http://postimage.org/image/5lrm61agd/
7. Instal DFS and run.
8. Click Ports, select the port with the signature DBAdapter Reserved Interface (double click) to close.
http://postimage.org/image/3l3bmfyzr/
9. In the DM select Qualcomm.
http://postimage.org/image/6bmt1908z/
10) Press the SPC, the bottom will Device Unlocked.
11) Select Programming and in the IMEI write yours and press Write.
http://postimage.org/image/dmbp29q35/
13) Check Imei, may appear after a reboot, if not try a few more times to try to set the port speed to 115200 (box to the left of DM)
Check IMEI *#06#
As soon as the IMEI restored change:
* # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings to put on the Manufacture mode google mode (or normal if you do not get up google)
* # * # 2846579 # * # * -> ProjectMenu - > Background settings -> Qualcomm backround open settings put close
Good luck..
Thanks a lot... now I got my imei back. But now I have one another problem, I installed ics rom and now my wifi Mac id is 00:00:00:00:00:00. Are they related?
Sent from my U8800 using XDA Premium 4 mobile app
I don't think so. But I've already replied somewhere on how to fix mac address. Search
Sent from my U8800 using xda app-developers app
Didn't work for me
Cybergiannis said:
Hello. I've been getting a lot of emails on how to do that and i thought i should make a thread here.
Now you got to have the original box in which there is the imei written. I don't take any credit for this guide as i didn't write it but i found it somewhere here but it doesn't exist anymore. I'm not responsible for any damage may happen to your phone. I did it several times after flashing official 2.3.5.
It has worked fine with my IDEOS X5 U8800.
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk...012_09_12.html
c. Software for restore
http://www.2shared.com/file/xBxUOnPz/DFS.html
2. Enable debugging by USB in the settings.
In call type * # * # 2846579 # * # * http://postimage.org/image/tnj4s2dyj/
3. Go to ProjectMenu -> Background settings -> Usb port settings put the Manufacture mode and corfim.
4. Go again to ProjectMenu -> Background settings -> Qualcomm backround open settings put the background open. Password 0 and corfim.
5. Go again to ProjectMenu -> Background settings -> Log setting -> Log switch put log on and corfim.
6. Now conect your phone to pc and install the drivers.
You must see this at your device manager http://postimage.org/image/5lrm61agd/
7. Instal DFS and run.
8. Click Ports, select the port with the signature DBAdapter Reserved Interface (double click) to close.
http://postimage.org/image/3l3bmfyzr/
9. In the DM select Qualcomm.
http://postimage.org/image/6bmt1908z/
10) Press the SPC, the bottom will Device Unlocked.
11) Select Programming and in the IMEI write yours and press Write.
http://postimage.org/image/dmbp29q35/
13) Check Imei, may appear after a reboot, if not try a few more times to try to set the port speed to 115200 (box to the left of DM)
Check IMEI *#06#
As soon as the IMEI restored change:
* # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings to put on the Manufacture mode google mode (or normal if you do not get up google)
* # * # 2846579 # * # * -> ProjectMenu - > Background settings -> Qualcomm backround open settings put close
Good luck..
Click to expand...
Click to collapse
This procedure did not work for me. I found it a couple of weeks ago in another thread (http://forum.xda-developers.com/showthread.php?t=1591997) and gave it a try (numerous times) without success. I was able to complete all steps up until actually writing the new IMEI. I attempted to write it a couple of dozen times without any success. It appears to work but the lMEI never actually changes.
I also found another procedure using a program called NVedit but it would give me an error stating the NV location was set to read only (I forget the actually wording). It seems that my phone has the location that contains my IMEI locked in some way that nothing can change it. So I gave up on that phone and am using a different one that I bought on eBay, brand new at a dirt cheap price ($27.00).
pastorbob62 said:
This procedure did not work for me. I found it a couple of weeks ago in another thread (http://forum.xda-developers.com/showthread.php?t=1591997) and gave it a try (numerous times) without success. I was able to complete all steps up until actually writing the new IMEI. I attempted to write it a couple of dozen times without any success. It appears to work but the lMEI never actually changes.
I also found another procedure using a program called NVedit but it would give me an error stating the NV location was set to read only (I forget the actually wording). It seems that my phone has the location that contains my IMEI locked in some way that nothing can change it. So I gave up on that phone and am using a different one that I bought on eBay, brand new at a dirt cheap price ($27.00).
Click to expand...
Click to collapse
are you rooted? i remember having these issues when i flashed 2.3 after 4.2 rom. u first need ti flash 2.2 then 2.3 and that should work
Cybergiannis said:
are you rooted? i remember having these issues when i flashed 2.3 after 4.2 rom. u first need ti flash 2.2 then 2.3 and that should work
Click to expand...
Click to collapse
Yes, I am rooted.
I started out on 2.2 way back in the beginning. Then I flashed 2.3.5. That's when I lost my IMEI and replaced the phone.
But I wanted to keep experimenting at getting it working 100% even though I had a new working, rooted, and customized phone. Using 5IromToolBox I restored a backup from the new phone to the broken phone just to see if it would work. Then I flashed Stallion-51-ICS custom ROM. It is a GB based ROM with look and feel of ICS.
When I run the procedure in this thread, everything looks as though it has worked, but the IMEI never changes. So what did 5Irom do differently that it was able to restore the backup from a different phone but I cannot use DFS or NVEditor to write to the locations? The back I made from the new phone and restored to the old one is Consumer Cellular so I suspect they have locked something out that 5Irom is able to get around but other tools don't.
On another note, just for the heck of it I tried to upgrade to ICS from GB and it fails on the first update step. Go figure.
If I could find a full-flash procedure for the pro and 51 versions of this phone I suspect I could resolve all issues. Who knows?
UPDATE: I went through the whole process again and noted a point I forgot to mention. In DFS at the bottom of the screen EQF is yellow, not green. I don't recall exactly what that means but in reading through the DFS doc, it states that writing a new IMEI is not possible as long as EQF is yellow. When I enter my IMEI and click on the WRITE command the response is "MODECHANGE OfflineD OK"
pastorbob62 said:
Yes, I am rooted.
I started out on 2.2 way back in the beginning. Then I flashed 2.3.5. That's when I lost my IMEI and replaced the phone.
But I wanted to keep experimenting at getting it working 100% even though I had a new working, rooted, and customized phone. Using 5IromToolBox I restored a backup from the new phone to the broken phone just to see if it would work. Then I flashed Stallion-51-ICS custom ROM. It is a GB based ROM with look and feel of ICS.
When I run the procedure in this thread, everything looks as though it has worked, but the IMEI never changes. So what did 5Irom do differently that it was able to restore the backup from a different phone but I cannot use DFS or NVEditor to write to the locations? The back I made from the new phone and restored to the old one is Consumer Cellular so I suspect they have locked something out that 5Irom is able to get around but other tools don't.
On another note, just for the heck of it I tried to upgrade to ICS from GB and it fails on the first update step. Go figure.
If I could find a full-flash procedure for the pro and 51 versions of this phone I suspect I could resolve all issues. Who knows?
UPDATE: I went through the whole process again and noted a point I forgot to mention. In DFS at the bottom of the screen EQF is yellow, not green. I don't recall exactly what that means but in reading through the DFS doc, it states that writing a new IMEI is not possible as long as EQF is yellow. When I enter my IMEI and click on the WRITE command the response is "MODECHANGE OfflineD OK"
Click to expand...
Click to collapse
it should be green! what i would do is to flash 2.2 then 2.3.5 and follow again the steps very carefully! maybe u ever flashed a partition and it's not the default one? i can't really help you :/ try this and if it doesn't work make a thread in the q&a section
Cybergiannis said:
it should be green! what i would do is to flash 2.2 then 2.3.5 and follow again the steps very carefully! maybe u ever flashed a partition and it's not the default one? i can't really help you :/ try this and if it doesn't work make a thread in the q&a section
Click to expand...
Click to collapse
Yeah, I knew that it should be green. The bottom line is I do not have the 2.2 image to flash. I would have done that a long time ago if I had it. All I have is the DiskImage backup that I made off of my new phone. When I flashed it onto the old phone it starts, displays the Consumer Cellular logo for about ten seconds then shuts off immediately. As far as starting a thread in Q & A, I did that weeks ago and got nowhere fast.
Any link I have found for the original 2.2 for -51 and pro is usually a broken link. or it takes me to download that stupid iLivid program that doesn't do squat to get the files I need. I did find a DiskImage file that somebody made and posted but it is almost 4 gig in size. You are supposed to use Pink Screen to load it but Pink Screen only gives me access to the image directory and it's only 256 meg.
Thank you for your time and suggestions.
I believe in the wiki section there are links to default 2.2 and 2.3.5. The ones I found a long time ago were from Blefish, although I'm not sure. Good luck!
Sent from my U8800 using xda app-developers app
Dead link.
Hi.
I try to download the "Drivers for Android 32 and 64 bit win 7 (not tested )", but its a dead link. I run win7 pro, and somehow the 32 bit driver doesn't work.
Would like to try the 64 bit driver. Could u reupload it, please?
I just did a repost cause i veen asked a lot of times I don't have the files and I don't thinks drivers are needed. You could just install huawei's suite for PC
Sent from my U8800 using xda app-developers app
WORKS!!!!
Cybergiannis said:
I just did a repost cause i veen asked a lot of times I don't have the files and I don't thinks drivers are needed. You could just install huawei's suite for PC
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
YEY!!!!!!! It worked!!!!
Update the first post with this info so others dont have to struggle like I did.
Thanks a bunch!!! :victory:
ευχαριστω πολυ----thanks man
Hi All,
Many thanks for this post.
Iv recently installed the Blefish CM11 rom for U8800 and its works fine. Only issue I have is IMEI=0. I can make and receive calls and even use the mobile internet.
My question is - Is there a way to edit the IMEI no on KK4.4.2 ROM through entering in the engineering mode?
or else, will have to start from the beginning (stock rom process as mentioned in the OP).
thanks for your help.
mohammad.nomaan said:
Hi All,
Many thanks for this post.
Iv recently installed the Blefish CM11 rom for U8800 and its works fine. Only issue I have is IMEI=0. I can make and receive calls and even use the mobile internet.
My question is - Is there a way to edit the IMEI no on KK4.4.2 ROM through entering in the engineering mode?
or else, will have to start from the beginning (stock rom process as mentioned in the OP).
thanks for your help.
Click to expand...
Click to collapse
i have no idea. my guess is that u should try
Cybergiannis said:
i have no idea. my guess is that u should try
Click to expand...
Click to collapse
Hi,
I haven't found out the way to fix it yet.
Only way I got to fix is to redo the stock rom, root, save the imei and the reflash the custom rom.
The reason for the imei issue was changing the partitions
thnx anyways
this guide that you have post it has been made by me and at least you should have say that is ported from me. Even the links that you have are in my acount. YOU ONLY COPY MY POST . you could ask me to repost it or just mention me. Check this link http://forum.xda-developers.com/showthread.php?t=1876501
Hi all, i've purchased an SM-G900F but there is a problem, it has rooted.
I've noticed those :
- I can see IMEI number (if i do #*06#) but my EFS folder is empty
- When turn on WiFi , the device will reboot automatically and appear " Factory Mode is On"
- i can make first call with sim , after i'm unable to call , but the 3G network works
- Whit ES File Explorer i've see that my efs folder is empty (But i can see my IMEI with secret code)
- In Device Info i see one time "Official Status" and another time "Personalized Status"
I'm tinking that old owner is a very st......d guy. Howewer these are all information :
Model : SM-G900F
Version : 4.4.2
BASEBAND : NE2
BUILD : NE2
What do you think? How i can solve the problems?
EDIT 1 : i've formatted from recovery , now it ask me to insert the samsung account of old owner...
- Use Phone INFO ★Samsung★ app to obtain more detailed information about your device, including Model, Baseband, Bootloader, CSC, IMEI, S/N, etc...
- May be the Reactivation lock has been enabled. You should ask the ex-owner for the account.
qwertyup88 said:
Hi all, i've purchased an SM-G900F but there is a problem, it has rooted.
I've noticed those :
- I can see IMEI number (if i do #*06#) but my EFS folder is empty
- When turn on WiFi , the device will reboot automatically and appear " Factory Mode is On"
- i can make first call with sim , after i'm unable to call , but the 3G network works
- Whit ES File Explorer i've see that my efs folder is empty (But i can see my IMEI with secret code)
- In Device Info i see one time "Official Status" and another time "Personalized Status"
I'm tinking that old owner is a very st......d guy. Howewer these are all information :
Model : SM-G900F
Version : 4.4.2
BASEBAND : NE2
BUILD : NE2
What do you think? How i can solve the problems?
EDIT 1 : i've formatted from recovery , now it ask me to insert the samsung account of old owner...
Click to expand...
Click to collapse
reactivation lock is on. you will need to contact old owner. There is also a way to "fix" that but not sure if it is appropriate for XDA.
kabloomz said:
reactivation lock is on. you will need to contact old owner. There is also a way to "fix" that but not sure if it is appropriate for XDA.
Click to expand...
Click to collapse
Can you send me an email ? i really need hepl
vndnguyen said:
- Use Phone INFO ★Samsung★ app to obtain more detailed information about your device, including Model, Baseband, Bootloader, CSC, IMEI, S/N, etc...
- May be the Reactivation lock has been enabled. You should ask the ex-owner for the account.
Click to expand...
Click to collapse
The guy was not traceable now. He's vanished ....
You are kinda between a rock and a hard place if reactivation lock is enabled and you don't have the login to toggle that. In most cases that means that the phone is stolen and this is an explicit anti theft feature. You need that login from the original owner. Or if you have the original receipt, you might be able to convince a Samsung repair center to disable the reactivation lock for you.
In any event, as to your original question the most likely cause of the problem is a corrupt configuration file, namely a text file named "factorymode". You can try this repair from the command line or a root aware text editor.
Code:
echo -n ON > /efs/FactoryApp/factorymode
.
fffft said:
You are kinda between a rock and a hard place if reactivation lock is enabled and you don't have the login to toggle that. In most cases that means that the phone is stolen and this is an explicit anti theft feature. You need that login from the original owner. Or if you have the original receipt, you might be able to convince a Samsung repair center to disable the reactivation lock for you.
In any event, as to your original question the most likely cause of the problem is a corrupt configuration file, namely a text file named "factorymode". You can try this repair from the command line or a root aware text editor.
Code:
echo -n ON > /efs/FactoryApp/factorymode
.
Click to expand...
Click to collapse
Just now the guy told me account and password . Now i'm able to use my phone !!!!! But now i see that the efs folder is empty...
qwertyup88 said:
Just now the guy told me account and password . Now i'm able to use my phone
Click to expand...
Click to collapse
Great. But you neglected to tell us if you tried (or even noticed) the suggestion to check your factory mode configuration file. The contents should show "ON" (yes, "ON") and the permissions 0644. Your efs folder may appear empty to you when it really isn't. It depends on whether you have your file browser (or command line options) set to display hidden and system files or not.
.
fffft said:
Great. But you neglected to tell us if you tried (or even noticed) the suggestion to check your factory mode configuration file. The contents should show "ON" (yes, "ON") and the permissions 0644. Your efs folder may appear empty to you when it really isn't. It depends on whether you have your file browser (or command line options) set to display hidden and system files or not.
.
Click to expand...
Click to collapse
y factory mode is on , because i can't acces my wifi, and it appear that factory mode is on. I've set to see hidden files , but now i haven't root on my device
Edit: terminal emulator say : no such file or directory
Edit 2 : Solved with terminal emulator and busy box Thanks to @leoaudio13 for his dump
These are the command for mount efs :
su
mke2fs /dev/block/mmcblk0p12
mount -w -t ext4 /dev/block/mmcblk0p12
reboot
After then , with text editor i've disabled FactoryApp in efs folder tanks to all
.
For the benefit of anyone else reading this thread, do not repeat the steps in the post above until
you understand what they do. A typo in those steps could easily cause you endless grief.
Glad you go it working.
If those steps fixed your issue, then you mislead us with erroneous information earlier. You said that you had an empty efs folder earlier. But those steps would not have been necessary or effective if that was accurate. You must have had a missing efs partition. There is a considerable difference between an empty and nonexistent item and that datum would have led us to a solution.
On a normal phone, there would be an extant efs folder and it would be automatically mounted at boot. A missing folder strongly suggests that the wrong firmware or a flash error took place. Presumably by the previous owner.
Anyone using the make filesystem command mke2fs /dev/block/mmcblk0p12 should be very careful with typos as an incorrect address could cause major corruption that would be difficult to recover from.
.
Originally Posted by qwertyup88 View Post
Hi all, i've purchased an SM-G900F but there is a problem, it has rooted.
I've noticed those :
- I can see IMEI number (if i do #*06#) but my EFS folder is empty
- When turn on WiFi , the device will reboot automatically and appear " Factory Mode is On"
- i can make first call with sim , after i'm unable to call , but the 3G network works
- Whit ES File Explorer i've see that my efs folder is empty (But i can see my IMEI with secret code)
- In Device Info i see one time "Official Status" and another time "Personalized Status"
I'm tinking that old owner is a very st......d guy. Howewer these are all information :
Model : SM-G900F
Version : 4.4.2
BASEBAND : NE2
BUILD : NE2
What do you think? How i can solve the problems?
EDIT 1 : i've formatted from recovery , now it ask me to insert the samsung account of old owner...
Click to expand...
Click to collapse
Ive got almost the same problem, i bought my s5 to a friend who visited Philippines from Korea, He acquired the Phone in a Pawnshop in korea, i restore the phone and now it asked me for a password which i dont know, send it to the Technician, Force to delete the account (dont know how) but the problem is that, Phone has NO SIGNAL from then on, it has a NO signal above instead of a bar signal, EFS folder is empty, IMEI was null 000000000000000.
Anybody has the same experience? how can i fix this? please help.
Not perfectly solved .... After first call it don't connect to the network. Only after reboot it connect.
Any suggestions ?
qwertyup88 said:
Not perfectly solved .... After first call it don't connect to the network. Only after reboot it connect.
Any suggestions ?
Click to expand...
Click to collapse
could be a block imei by the operator? if it is POSSIBLE to solve? or it could be due however to the efs folder, or the firmware, modem?
edreab86 said:
Ive got almost the same problem, i bought my s5 to a friend who visited Philippines from Korea, He acquired the Phone in a Pawnshop in korea, i restore the phone and now it asked me for a password which i dont know, send it to the Technician, Force to delete the account (dont know how) but the problem is that, Phone has NO SIGNAL from then on, it has a NO signal above instead of a bar signal, EFS folder is empty, IMEI was null 000000000000000.
Anybody has the same experience? how can i fix this? please help.
Click to expand...
Click to collapse
it's a different problem , you have a null imei , in your case it's more difficult to resolve.
Originally Posted by qwertyup88
it's a different problem , you have a null imei , in your case it's more difficult to resolve.
Click to expand...
Click to collapse
As you can read i said, Ive got almost the same problem, i don't say we have the same problem. in a sense that previous owner account or the reactivation lock is present. sorry if i made a statement that bothers you, just looking for a solution.
hello guys, always about the efs folder I was reading this post: http://forum.xda-developers.com/showthread.php?t=2705524.
according to you through this tool is possiblile restore the backup I had done with samsung tool? I would like to try this because the efs folder on my sm-g900f is 23kb, but the backup I had done with samsung tool is 14mb !! what do you think?
I've been trying to find the correct files to sort my device out, but I am having a hard time with it... I can't get the codes to work to find the CSC code for my device and I am unsure if I am downloading the right files, so I would like it if any of you who know a little more about all of this stuff can help me with this.
On the recovery menu this is listed:
Code:
8.0.0 / R16NW / G950FXXU4CRL3
I don't know for sure, but I think the network is on 02. I am unsure if it's open but an 02 sim gets signal bars when placed in the device.
I can't find a way to get a code to work to find the CSC code for the device though, I have tried a few combinations of the number on the dial pad to get the information so I don't download the wrong file.
Code:
*#1234#
*#*#1234#*#*
Both of thee are not working. I am going to be following this guide to achieve removing the google FRP over at - hardreset.info/devices/samsung/samsung-g950f-galaxy-s8/faq/bypass-google-verification/frp-samsung-android-8
(sorry I just seen I cannot post links yet)
Any help would be much appreciated!!