Database Users

how to flash ddjp6 official indian froyo via odin?

i am asking this question bcoz i have flashed the official froyo for asia dxjpa
and the flashing way via odin was different cozz pit file 513 is used for flashing it.
so i wanted to know the right flashing way for ddjp6 froyo .. via odin
i downloaded the firmware ddjp6.. and it contains only one .tar file
so i just wanted to know the perfect flashing method
please dont advise me to do it through kies...
thanx

You can flash DDJP6 via odin the same way you flashed DXJPA without using any .pit file and it will work. As I have also flashed the other asian versions without using any .pit file (no .pit file recommended for firmwares with only one file on sam firmwares).

So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?

Prasad007 said:
So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?
Click to expand...
Click to collapse
Not sure about what exactly .pit file does but had a problem installing DXJPA earlier with .803pit (failed to flash) then tried with .513 and worked well.
haven't noticed the boot animation.

Did u move from 2.1 or unofficial 2.2?

i have a question..
if there is one tar file, should i put the file in just pda or PDA,PHONE AND CSc and then flash?

PDA for single tar file
jje

Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.

JJEgan said:
PDA for single tar file
jje
Click to expand...
Click to collapse
I clarification after flashing with Odin will all the setting & data reset to factory.
Or will all the personal data, Games, applications will remain.
One more thing if the Re-Partation in Unchecked (Not selected). Will the Odin keep my data as it is on the phone or it will reset to factory settings.

ragin said:
Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.
Click to expand...
Click to collapse
Do you have the original PDA for XXJPY, the one you posted was with some change, I need the original JPY PDA file, Please give me the link

thanks..
so if i Root in the current jp6 im running, and it was updated by KIES, can i flash without removing the root by using ODIN?
And also i need to know possible best options to flash official firmwares.

Stuck in loop recovery

hi all and Merry Christmas. I was trying to flash P1000XXJMD. everything seems to work fine, until reboot. after restarting and dial *#1234# I seen the CSC and Modem is missing and I reboot I reflash and reboot in recovery mode in order to finish installation of CSC (as usually use to do) after all is automatically rebooting in recovery mode. every-time i tried to reboot it goes in recovery .....how to fix this? thanks in advance !

Download dbdata put it in pda in odin
http://forum.xda-developers.com/attachment.php?attachmentid=445398&d=1290261479
Sent from my GT-I9000 using XDA App

ownhd2 said:
Download dbdata put it in pda in odin
http://forum.xda-developers.com/attachment.php?attachmentid=445398&d=1290261479
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i have already done that, but still the same.....i was trying to go bac to JMC or JMD and I'm facing with the same problem (stuck in loop recovery). If I don't restart in recovery manually, to finalize the installation of CSC, and I do restart after flashing of JMD it will work but nu CSC and no PDA (*#1234#)

after rebooting in recovery mode, I got this message:
--Appling Muti-CSC...
INstalling Muti CSC
multicsc : src /system/csc/KOR/system/ .
can someone help me?
I reflash more than 10 times and same result. even if i tried to go back to JMC or JMA, it doesn't help me..... also I tried to flash DbData .....but it not help....

What firmware you on at the mo as i heard on here that you cant downgrade as some firmware change the bootloader
Sent from my GT-I9000 using XDA App

ovigt71 said:
after rebooting in recovery mode, I got this message:
--Appling Muti-CSC...
INstalling Muti CSC
multicsc : src /system/csc/KOR/system/ .
can someone help me?
I reflash more than 10 times and same result. even if i tried to go back to JMC or JMA, it doesn't help me..... also I tried to flash DbData .....but it not help....
Click to expand...
Click to collapse
May be worth just flashing the cache.rfs file when in Download mode using heimdall or Odin. That will push the file onto the device, reboot it into recovery mode and then flash the csc files. Looks like it's getting stuck on that part? See this post for more info.

ownhd2 said:
What firmware you on at the mo as i heard on here that you cant downgrade as some firmware change the bootloader
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i bypass the finalizing of CSC via recovery, and my TAB starting...but with this result ....hm i'm wondering why, because I was supposed to update from JMC to JMD ....so what I got? JMA? hm....can be fixed?

Yeah you need to update to JMD
Sent from my GT-P1000 using XDA App

ownhd2 said:
Yeah you need to update to JMD
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
ok...and how can I do that?????

flashed with odin 1.7 , no pit file , still froyo 2.2
need to flash dbdata after reboot
another firmware updated 24.12.2010
Modified: 10/12/24
PDA: P1000XXJMD
Phone: P1000XXJMA
CSC: P1000OXAJMD
Url: http://fus.samsungmobile.com/Phone_B...XX_ITV.zip.enc
Decrypt Code: 1446739
decripted file: http://www.multiupload.com/KHMVHJYZZ1
Sent from my GT-I9000 using XDA App

already done that sir, but still no good results......I'll try again!

ownhd2 said:
flashed with odin 1.7 , no pit file , still froyo 2.2
need to flash dbdata after reboot
another firmware updated 24.12.2010
Modified: 10/12/24
PDA: P1000XXJMD
Phone: P1000XXJMA
CSC: P1000OXAJMD
Url: http://fus.samsungmobile.com/Phone_B...XX_ITV.zip.enc
Decrypt Code: 1446739
decripted file: http://www.multiupload.com/KHMVHJYZZ1
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
first link seems to be broken...is same thing to the second one?

problem solved! for other users whom will face the same problem I will explain my solution: In order to flash the JMD over JMC or JMA you should use P1.PITfile from here (check in the bottom of the page the download link), then open Odin 1.7, select Re-partition and add PIT file (P1_add_hidden.pit), then add to PDA the JMD file, then click on START. After finish installation it will restart in Download mode again; Switch off the restart in Recovery Mode. It will finalize the installation of CSC and PDA. look at my results !

Good news! Glad you got it fixed.

paulshields said:
Good news! Glad you got it fixed.
Click to expand...
Click to collapse
thanks ! I spent more than 24 hours, searching for way to fix...but it worth!

Glad your back in tab family
Sent from my GT-I9000 using XDA App

custom rom to stock firmare..phone like brand new

how can i load my phone with the stock firmware..i have odin n the firmware on my computer..i have darkys rom on my phone,,is dea anywae to restore the phone the way it was whn i bought it??..

find the JPY standard firmware from samsungfirnwares.com and flash all 3 parts [Phone, Modem and CSC] with repartition checked.
that should sort it
Matt

sumeetp said:
how can i load my phone with the stock firmware..i have odin n the firmware on my computer..i have darkys rom on my phone,,is dea anywae to restore the phone the way it was whn i bought it??..
Click to expand...
Click to collapse
Follow this guide, i did... its what you want.
samsunggalaxysforums.com/showthread.php/2770-How-to-use-Odin-to-Flash-JPO-firmware-if-you-used-the-Kies-registry-hack-to-get-JPM

flashing with odin will make it stock.
what you need to do is
flash the pit file with re-partition selected.
then once that has done flash the other 3 files with re-partition un selected.

I just used kies with the registry patcher, then used CSC selector from the market and everything was sorted.

[Q] Help Needed Urgent

i Have downloaded the file I9003DDKB2.rar and extracted it and got I9003DXKB2-I9003DXKB2-I9003DDKB2_HOME inside of the folder.. How can i flash my i9003 when there is only one file and none of it even states that it is a PDA,PHONE or CSC fileso be patient wit me.. how to flash ..any one could help me...

Just select the pit file as normal but remember to uncheck repartition box and flash , then reboot in download mode and put the ddkb2 single file in the PDA slot and flash
Press Thanks if it helps you!!!

dont do this foolishness by selecting the pit file..
directly choose the PDA file .
andperform a hard reset after flashing..
ur done....

But don't u need a pit even for flashing a single file package?

Gamer2 said:
But don't u need a pit even for flashing a single file package?
Click to expand...
Click to collapse
No... You don't need a pit file when flashing binary as a single file.
Select the tar as pda and flash it.
Sent from my GT-I9003 using XDA Premium App

The PIT file is to repartition the phone for a clean wipe. When upgrading you need only the PDA file, Considering it falls under the same OS version

I need a PDA,PHONE and CSC file for I9003DDKB2 because in my i9003 I have already installed I9003XXKP9.So I want to change it back to my orignal I9003DDKB2 in my mobile.
So anbody who has the file please upload it.
Problem that I am facing in the I9003XXKP9 is the camera is not working, is there any way I can rectify the problem and retain the I9003XXKP9 in my mobile.Then may be I wont need the files for I9003DDKB2.
Thanks in advance

Flash to xxkb3 following krazy's guide and then flash to ddkb2 without using the pit file...put your file in pda and flash
Sent from my GT-I9003 using XDA App

Thanks ronhoover88 I was able to revert back to ddkb2.I followed the way you told and it worked fine for me.

Can any one conform that i9003 have arabic language
Sent from my GT-I9000 using XDA App

Bootloop while flashing JW4

Hey, I tried flashing JW4 stock rom via ODIN which I downloaded from sammobile.
The name of the file is I9000XXJW4_I9000OXAJW4_XEU.zip and on extracting there were 2 files called JW4_JW4_JW4.tar & SS_DL.dll. I selected the tar file in PDA and flashed. The process passed but am stuck with bootloop. Plz help

I also flashed a jw4. But that was without the dll.
Anyway, after i flashed and it booted up i got a doozen errors telling me it couldnt mount different partitions.
So i gave it up as a bad one and found a thread here at xda with different stock roms and ended up with jw5.
No complications whatsoever. Yet
just google for "stock roms i9000 xda" and you should stumble over the thread i believe.
Good luck
Sent from my GT-I9000 using Tapatalk

I faced exactly the same problem: bootloop after flashing XXJW4 and many mount errors in the screen. I concluded that this firmware is not standalone in the sense that you cannot flash and repartition the device using it. Following this logic I performed these steps, leading me to a successfully recovered and fully functional XXJW4 phone:
Flash it with a full stock firmware, e.g. XXJVU (mark "repartition" as well).
Flash XXJW4 as you have done it, but make sure "Repartition" is not selected. That is, just select the tar file in the PDA field and leave the rest with the default options.

Another huge problem Got Black Screen Of Death. Am able to get my phone on to download mode but odin is not detecting my phone. HELP ME What to do?

bindaasathar said:
Another huge problem Got Black Screen Of Death. Am able to get my phone on to download mode but odin is not detecting my phone. HELP ME What to do?
Click to expand...
Click to collapse
Use another USB port. You can flash deodex version of JW4 which doesn't have any problems

bootloops
Factory Reset / Cache Wipe /
use by the Pitfile from JW 1 and flash the JW 4 ,that`s it !!
LG.G.

jpabloae said:
I faced exactly the same problem: bootloop after flashing XXJW4 and many mount errors in the screen. I concluded that this firmware is not standalone in the sense that you cannot flash and repartition the device using it. Following this logic I performed these steps, leading me to a successfully recovered and fully functional XXJW4 phone:
Flash it with a full stock firmware, e.g. XXJVU (mark "repartition" as well).
Flash XXJW4 as you have done it, but make sure "Repartition" is not selected. That is, just select the tar file in the PDA field and leave the rest with the default options.
Click to expand...
Click to collapse
great job. thanks for this

bindaasathar said:
Hey, I tried flashing JW4 stock rom via ODIN which I downloaded from sammobile.
The name of the file is I9000XXJW4_I9000OXAJW4_XEU.zip and on extracting there were 2 files called JW4_JW4_JW4.tar & SS_DL.dll. I selected the tar file in PDA and flashed. The process passed but am stuck with bootloop. Plz help
Click to expand...
Click to collapse
Your PDA file might be missing the dbdata.rfs file, see here: http://forum.xda-developers.com/showthread.php?p=24182099&highlight=dbdata#post24182099, which can cause boot loops.