i Have downloaded the file I9003DDKB2.rar and extracted it and got I9003DXKB2-I9003DXKB2-I9003DDKB2_HOME inside of the folder.. How can i flash my i9003 when there is only one file and none of it even states that it is a PDA,PHONE or CSC fileso be patient wit me.. how to flash ..any one could help me...
Just select the pit file as normal but remember to uncheck repartition box and flash , then reboot in download mode and put the ddkb2 single file in the PDA slot and flash
Press Thanks if it helps you!!!
dont do this foolishness by selecting the pit file..
directly choose the PDA file .
andperform a hard reset after flashing..
ur done....
But don't u need a pit even for flashing a single file package?
Gamer2 said:
But don't u need a pit even for flashing a single file package?
Click to expand...
Click to collapse
No... You don't need a pit file when flashing binary as a single file.
Select the tar as pda and flash it.
Sent from my GT-I9003 using XDA Premium App
The PIT file is to repartition the phone for a clean wipe. When upgrading you need only the PDA file, Considering it falls under the same OS version
I need a PDA,PHONE and CSC file for I9003DDKB2 because in my i9003 I have already installed I9003XXKP9.So I want to change it back to my orignal I9003DDKB2 in my mobile.
So anbody who has the file please upload it.
Problem that I am facing in the I9003XXKP9 is the camera is not working, is there any way I can rectify the problem and retain the I9003XXKP9 in my mobile.Then may be I wont need the files for I9003DDKB2.
Thanks in advance
Flash to xxkb3 following krazy's guide and then flash to ddkb2 without using the pit file...put your file in pda and flash
Sent from my GT-I9003 using XDA App
Thanks ronhoover88 I was able to revert back to ddkb2.I followed the way you told and it worked fine for me.
Can any one conform that i9003 have arabic language
Sent from my GT-I9000 using XDA App
Related
i am asking this question bcoz i have flashed the official froyo for asia dxjpa
and the flashing way via odin was different cozz pit file 513 is used for flashing it.
so i wanted to know the right flashing way for ddjp6 froyo .. via odin
i downloaded the firmware ddjp6.. and it contains only one .tar file
so i just wanted to know the perfect flashing method
please dont advise me to do it through kies...
thanx
You can flash DDJP6 via odin the same way you flashed DXJPA without using any .pit file and it will work. As I have also flashed the other asian versions without using any .pit file (no .pit file recommended for firmwares with only one file on sam firmwares).
So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?
Prasad007 said:
So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?
Click to expand...
Click to collapse
Not sure about what exactly .pit file does but had a problem installing DXJPA earlier with .803pit (failed to flash) then tried with .513 and worked well.
haven't noticed the boot animation.
Did u move from 2.1 or unofficial 2.2?
i have a question..
if there is one tar file, should i put the file in just pda or PDA,PHONE AND CSc and then flash?
PDA for single tar file
jje
Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.
JJEgan said:
PDA for single tar file
jje
Click to expand...
Click to collapse
I clarification after flashing with Odin will all the setting & data reset to factory.
Or will all the personal data, Games, applications will remain.
One more thing if the Re-Partation in Unchecked (Not selected). Will the Odin keep my data as it is on the phone or it will reset to factory settings.
ragin said:
Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.
Click to expand...
Click to collapse
Do you have the original PDA for XXJPY, the one you posted was with some change, I need the original JPY PDA file, Please give me the link
thanks..
so if i Root in the current jp6 im running, and it was updated by KIES, can i flash without removing the root by using ODIN?
And also i need to know possible best options to flash official firmwares.
recently,i want to flash back to stock rom(DXLF1),but after flashing failed and my phone only can boot into download mode,other mode like clock work recovery(stock)or boot up all cannot worked!!After that,i try many solution to unbrick my but all doesn't sucessfully like the screenshot
Sent from my M701C using xda app-developers app
Try firmware from doky's thread.
Please un tick the re-partition option and no need to put pit and bootloader files.
We used only Pda , phone and csc.
Harsh06 said:
Please un tick the re-partition option and no need to put pit and bootloader files.
We used only Pda , phone and csc.
Click to expand...
Click to collapse
right!, it worked on my sgy, i'm running DXLF1 now...
Hi, Tried to install root through odin for the first time but the install didn't complete.
Now my sgs won't boot anymore.
It gives, the firmware upgrade error.
I can boot into download mode.
When i try to flash the original firmware for the i9505 it gives an error (something about a pit file missing)...
What can i do to get my sgs4 working again?
breezerx said:
Hi, Tried to install root through odin for the first time but the install didn't complete.
Now my sgs won't boot anymore.
It gives, the firmware upgrade error.
I can boot into download mode.
When i try to flash the original firmware for the i9505 it gives an error (something about a pit file missing)...
What can i do to get my sgs4 working again?
Click to expand...
Click to collapse
seems partitions are corrupt so try getting the 16GB pit file and set it in odin with the repartition option enabled..... and try flashing the new firmware
Under normal circumstances, DO NOT tick "re-partition" during Odin flash of firmware.
Only tick "re-partition" if you have the PIT file as described in previous post
Ensure any firmware (double check !) is that for your specific model.
Sent from my GT-I9500 using xda premium
REVERSiN said:
seems partitions are corrupt so try getting the 16GB pit file and set it in odin with the repartition option enabled..... and try flashing the new firmware
Click to expand...
Click to collapse
Where can i get that 16gb pit file?
Firmware i have downloaded now ic absolutlely the correct one for my country/model (i9505)....
No one has the i9505 pit file (or someone can make it with heimdall ? )
i think u need pit file to do repartitioning
tornado92 said:
i think u need pit file to do repartitioning but no pit file yet for s4
Click to expand...
Click to collapse
There's a .pit file in the DOWNLOADER folder at this link: moulnisky DOT com/index.php?dir=Samsung/Firmwares/GT-I9505/
I haven't tested it so don't know if it works, but there you go.
P.S. I had the same issue and restored my phone using Kies firmware recovery mode: samsung DOT com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00048586&fm_seq=52928
hi guys i am looking for .PIT file and BOOTLOADER file for this phone..it someone has a back up could u plz upload it here? thanks
or another option is pointing me to download complete/full package firmware meaning the files/firmware does have:
PIT
BOOTLOADER
PDA
CSC
MODEM
http://forum.xda-developers.com/showthread.php?t=1465800
mizukage said:
hi guys i am looking for .PIT file and BOOTLOADER file for this phone..it someone has a back up could u plz upload it here? thanks
or another option is pointing me to download complete/full package firmware meaning the files/firmware does have:
PIT
BOOTLOADER
PDA
CSC
MODEM
Click to expand...
Click to collapse
direct link: http://d-h.st/PF5
from my youtube video
hi freand
gt-s5360 pit file
Help ! Nerd solution without computer
Hello i need flash boot loader and pit file via cwm. It is possible ? I dont have computer and i have the error e:cant mount data ... How to flash the stock ROM with bootloader and pit file without computer thanks a lot. I need this because i cant use Odin . i have any solution avaliable ? Sorry bad english
Pit
bootloader
pda
csc
modem
peles25 said:
Hello i need flash boot loader and pit file via cwm. It is possible ? I dont have computer and i have the error e:cant mount data ... How to flash the stock ROM with bootloader and pit file without computer thanks a lot. I need this because i cant use Odin . i have any solution avaliable ? Sorry bad english
Click to expand...
Click to collapse
Go to youtube. And type. Flash stock rom without computer. On galaxy y click on it there will be one. Back up file. Download. And. Use cwm. To. Restore ur. Stock. Rom. Or. Wait. For. 3 days. I will create. My. Backup. And will. Upload.
I am put PDA CSC phone flashing in odin3 v1.85
Also bootloop
What can I di
Make sure you choose right stock rom version.
Hi was hoping someone could point me in the right direction I need an open 32gb pit file for a SM-N910F , I want to install an EE stock rom over my Btu rom but it's slightly bigger so I need the pit file to repartition. Thank you
Sent from my SM-N910F using XDA Free mobile app
zipolly said:
Hi was hoping someone could point me in the right direction I need an open 32gb pit file for a SM-N910F , I want to install an EE stock rom over my Btu rom but it's slightly bigger so I need the pit file to repartition. Thank you
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Short version:
Pit file stock if you need it, later:
http://www.mediafire.com/download/tpygdi1lczo1ggz/stock_pit_fileSM-N910F.zip
new pit file to overcome the flash error in Odin, when the hidden.img is too large (fail in odin):
http://www.mediafire.com/download/ec2uhrl2vmxu690/modded_pit+file_forSM-N910F.zip
please, avoid all idiots processes to flash firmware withour the error of hidden.img, like this one:
http://forum.xda-developers.com/not...img-error-lollipop-910h-t3067208/post59790451
or this one:
http://www.htcmania.com/showthread.php?t=1007154
Long answer:
extract the pit file of your phone, with this tool:
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
edit and save your pit file in order to have more space in any partition, with this tool:
http://forum.xda-developers.com/showthread.php?t=1916936