Related
Hi,
I tried to upgrade from v2.1 to new Android 2.3.5 Gingerbread For LG Optimus GT540 and I followed instructions exactly, but I am stuck at number 8, I did this:
8- Now click “Launch software update”, DO NOT USE THE PC TO THE PROCESS IS COMPLETE. THE PHONE WILL REBOOT WHEN FINISHED THE PROCESS IN KDZ. (The process takes about 15 minutes in KDZ).
and about 2 minutes text log writes and stopped, I am now waiting more then 40 minutes my phone didn't reboot. On display is still written download mode, what should I do now ?
In kdz is written:
3GQCT: wParam = 205. IParam = 36
p.s.
I disconnected phone from usb and pull out battery and now I cannot turn on phone, I tried to push vol down + power for 5 sec.
Any idea what should I do now? I hope I didn't brick my phone
What programs are you using?
What are you using to update your phone and have you tried taking out your SIM, SD card and battery then turned it on with the USB cable?
I used KDZ updater and tried to install CyanogenMod7 (2.3.5) @ GT540 Swiftdroid2 RC3 by Mur4ik. if that is what you ask ?
I removed sim card and battery also, then tried to turn it on while plugged in to computer usb but no response from phone, I can't turn it on
p.s. I am using win 7 64 bit OS
gorantz said:
I used KDZ updater and tried to install CyanogenMod7 (2.3.5) @ GT540 Swiftdroid2 RC3 by Mur4ik. if that is what you ask ?
I removed sim card and battery also, then tried to turn it on while plugged in to computer usb but no response from phone, I can't turn it on
p.s. I am using win 7 64 bit OS
Click to expand...
Click to collapse
If you can't get into download mode, then it's game over I'm afraid. What you will need to do is return the phone back to where you bought it. This happened to me some time ago. But the Carphone Warehouse were happy to fix it (even though I had voided the warranty but don't tell them that ). Don't say that you tried to mod the phone, say something like 'I installed LG's PC Suite and it said my device had a software update. I went along with it, but it gave me an error half way through. Now my phone won't turn on at all' It might just work!
I had the same problem when modding with kdz.
completely bricked my phone, but was able to fix by putting kdz into emergency mode instead of diag and updating with a fastboot stock rom,
it would stop after 2 minutes and give me and error but it managed to get fastboot onto my phone,
(camera + power)
then just flashed the fastboot method with adb and everything was fine,
my problem was something to do with lg modem drivers i believe,
I read a thread that said to disable the lg virtual modem. (didnt
work for me)
pretty noob myself
but the above method worked for me,
not sure if this can do anymore damage to the phone
have a look at this is u get it into emegancy mode.
On the kdz updater instead of 3GQCT put into emergancy
http://www.youtube.com/watch?v=fDmU9RSIiDA
If you have tried flashing with Cm7 you might be lucky,
try holding camera button and powering on the phone, a black screen should come up thats fastboot.
if that comes up u should be able to just reflash following mur4iks instruction
if not try what i said in my last post and reflsh with phone type 3QGCT and PhoneMode EMERGENCY
again only going of how i fixed my bricked phone
ZxWelshyxz said:
If you have tried flashing with Cm7 you might be lucky,
try holding camera button and powering on the phone, a black screen should come up thats fastboot.
if that comes up u should be able to just reflash following mur4iks instruction
if not try what i said in my last post and reflsh with phone type 3QGCT and PhoneMode EMERGENCY
again only going of how i fixed my bricked phone
Click to expand...
Click to collapse
He was trying to flash a fastboot rom (to install CM7) but bricked his device in the process. So he can't flash CM7-.-
Yeah I know that but I mean when I got the error he has, I flashed with a stock 2.1 fastboot rom With Diag changed to EMERGENCY and was able to get on to fastboot mode (camera+power), I got the error again as i was flashing but the phone would load fastboot and not start up
If he can get lucky and get into fastboot like i did, a simple:
fastboot -w
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
should fix his problem or did i just get lucky?
sorry if im confusing thinks here, but this is how i fixed mine. which was also dead and not turning on
Sent from my GT540 using XDA App
@ZxWelshyxz
I am total neewbie, can you write to me some kind of tut, like press that then do that etc
gorantz said:
@ZxWelshyxz
I am total neewbie, can you write to me some kind of tut, like press that then do that etc
Click to expand...
Click to collapse
Well like i told you im a noob at this myself (Android phone flashing atleast)
I suppose it would be good to see if you got fastboot??
Power on the phone while holding camera button (hold the camera button until the screen goes black) if you can get fastboot you can just follow the fastboot flash instructions after fastboot -w
if not on kdz in the top right were it says DIAG, Change this to CS_EMERGENCY,Click Launch update and flash again with a stock fastboot rom
after THIS see if the phone loads or boot loops(had this once too) or loads fastboot
Il try look to find the thread i read on another forum for troubleshooting kdz it helped me alot
EDIT: http://android.modaco.com/topic/321895-faqgt540-reference-thread/ try some of the troubleshooting tips at the bottom of the O.P
I basicly aimed to get fastboot working so make sure your flashing with a stock FASTBOOT! rom
again im new to this im just saying what got my phone back to life
my fone stuck in download mood what can i do?
corecrack said:
my fone stuck in download mood what can i do?
Click to expand...
Click to collapse
Pull out the battery and turn on the phone again (if you have knocked the phone when turning on, or flash a KDZ (when connected to PC)
@gorantz
Can i advise to follow step by step tutorial pin pointed by lavero.burgos, am a total neewbie like u man,but now using latest CM7 by Mur4ik and waiting for new release from devs
Sent from my GT540 using XDA App
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
gorantz said:
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
Click to expand...
Click to collapse
I bricked my phone and I tried it again after getting it back from lg
I'm new here and to having a Smartphone, I've just been given an LG Android GT540 which is at version 1.6. The LG site tells me I can upgrade to 2 something or other, sorry can't remember the exact number and gives instructions on how to do the upgrade, but I'm a bit on the cautious side as I don't want to brick it, not this early on in owning my first Smartphone.
I'll be reading a lot of the posts here to try and find out as much as I can before I attempt to do this.
Well don't worry if it's official update. But if you some how brick your phone just tell lg the update bricked your phone and we are talking about unofficial updates
Sent from my GT540 using XDA App
gorantz said:
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
Click to expand...
Click to collapse
Dont hesitate to ask for help man its worth upgrading.
Sent from my GT540 using XDA App
I've got phone today from service (not official LG service), repairman just manage to wake up phone so I can turn it On, but when I turn it I get black screen with message on it ''download mode''. Now computer recognize phone when I plug it, and I tried to update or flash it with kdz updater but have no luck
I launch kdz in emergency mode, load rom with updater, press launch button, and process started, (get messages unpacking software etc.) but after 3-4 minutes I notice that computer is blocked I couldn't do anything with mouse pointer, and I waited 15 minutes but computer is still blocked, even time on computer is stopped. I tried this procedure few times, every time it is same. Also tried to disable lg virtual modem in device manager. Any idea what I could do ?
p.s. repairman in service told me that he tried it to flash it with riff box, process started but after few minutes if stopped and blocked his riff box
Hello guys ,
I wanted to flash a Original LG rom to downgrade my device from Mango Beta 2 to PreNodo, but if i connect my device with my PC nothing happens and the LGDP2_V36_UMTS.exe shows nothing (no progress bar or something). In some other forums the say i have to set the LG Emergency Donwload mode (Volume+Power+Camera) but there happens nothing than,,ColdBoot,,
My Sytem is using WIN7 Ultimate as OS. Im thank you for your answers
prepare all the things needed for the flash.
then go into mfg. menu number 10 - emergency download mode
press start on lgumts_36 bla bla bla.... then connect phone. usually t will connect to com 3
"Usually will connect to com3" is completely meaningless.
That depends on hardware and software configuration of your computer.
boot it in emergency dowload: camera, volume down and power.
Both volume down and up will send you to Cold Boot wich means factory reset
Hello,
I had update to Clockwork recover rom with kdz and then I decided to update to Gingerbread 2.3.7 but I didn't success. Now the phone can't open only one little vibration when push the power button.
Now I try to update rom to 2.3 on KDZ program with .kdz file, Type: 3GQCT Phone Mode: DIAG, OK.
I disabled the Modem on Win 7 Control Panel, connect to usb cable to phone and push the Launch Software Update button to start to update. When progress star I see DOWNLOAD MODE on the phone screen around 2 minutes and after that disapper that words. After around 6 minutes I get ==FINISHED== message on the process field. At that time the phone have to reboot it selfs an finished the job but it would'nt happen like that. After Finished message there is no action on phone or program.
I thing I did something wrong but I didn't find which point.
I just want to update my phone to latest version of Android.
What can I do now?
Thanks in advance.
dirent said:
Hello,
I had update to Clockwork recover rom with kdz and then I decided to update to Gingerbread 2.3.7 but I didn't success. Now the phone can't open only one little vibration when push the power button.
Now I try to update rom to 2.3 on KDZ program with .kdz file, Type: 3GQCT Phone Mode: DIAG, OK.
I disabled the Modem on Win 7 Control Panel, connect to usb cable to phone and push the Launch Software Update button to start to update. When progress star I see DOWNLOAD MODE on the phone screen around 2 minutes and after that disapper that words. After around 6 minutes I get ==FINISHED== message on the process field. At that time the phone have to reboot it selfs an finished the job but it would'nt happen like that. After Finished message there is no action on phone or program.
I thing I did something wrong but I didn't find which point.
I just want to update my phone to latest version of Android.
What can I do now?
Thanks in advance.
Click to expand...
Click to collapse
I could help you via teamviewer
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
AppY.fTw.wOw^ said:
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
Click to expand...
Click to collapse
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
need4steer said:
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
Click to expand...
Click to collapse
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
AppY.fTw.wOw^ said:
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
Click to expand...
Click to collapse
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
need4steer said:
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
Click to expand...
Click to collapse
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
kien_vip said:
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
Click to expand...
Click to collapse
tnx for the reply ill give it a try :good:
btw how to i reboot? using the power button??
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
AppY.fTw.wOw^ said:
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
Click to expand...
Click to collapse
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
AppY.fTw.wOw^ said:
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
Click to expand...
Click to collapse
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
need4steer said:
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
Click to expand...
Click to collapse
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
AppY.fTw.wOw^ said:
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
Click to expand...
Click to collapse
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
need4steer said:
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
Click to expand...
Click to collapse
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
AppY.fTw.wOw^ said:
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
Click to expand...
Click to collapse
Then all is left for you is to try what @kien_vip suggested previously.
need4steer said:
Then all is left for you is to try what @kien_vip suggested previously.
Click to expand...
Click to collapse
Before entering emergency mode you should remove the battery for a few seconds. Place it back into your phone then enter into emergency mode. Hope this could help you.
Lg update tool uses baseband as the only check whether your device has the latest update. This means you will get the update if you use an older baseband. However, you should try emergency option.
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
AppY.fTw.wOw^ said:
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
Click to expand...
Click to collapse
Good to know!
Thanks a lot for the detailed information.
hi
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
allainvillanueva said:
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
Click to expand...
Click to collapse
Hey, Sorry If im Replying Too Late.
Try Re-Flashing Stock RoM Using Kdz Updater.
This Should Help You! Then If You Want To Root Again Try SuperOneClick Root (Easiest Way) And Install CWM
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Schubi_1 said:
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Click to expand...
Click to collapse
Don't be desperate
You installed the baseband of aidasaidas75. I don't know why he made this new baseband, but several people have passed or are going through this situation you are going through right now. Download this file which contains a tutorial that I did (with videos) and follow in the order. Here is the link to download: http://www.mediafire.com/download/puibfc3chbrw2zs/tutorial.rar
Phone was not found!
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Schubi_1 said:
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Click to expand...
Click to collapse
Edit: Have you putted the phone in emergency mode?
iTzMeB1tch3s said:
Edit: Have you putted the phone in emergency mode?
Click to expand...
Click to collapse
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Schubi_1 said:
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Click to expand...
Click to collapse
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
iTzMeB1tch3s said:
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
Click to expand...
Click to collapse
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Schubi_1 said:
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Click to expand...
Click to collapse
you have to leave the screen like this:
View attachment 3716606
If you get put in this way, just connect to your PC and have them install the Stock ROM.
Now, if you could not leave it, try other key combinations to try to enter download mode.
do not give up!!!