Database Users

[Solved] Bluetooth headset volume reset to low in every call

I want to mention this problem though i know it has been questioned previously with no answer.
When during a call you raise the bluetooth headset volume then the phone doesnt remember the setting and you have to raise the volume after the next call and again and again.
Very annoying!!Also raising the bt headset volume then the volume control opens and the ringer sound is raised too and i need to lower it after each call!!
Any solution on this?
Thanks!!

solved it
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
When for any reason the volume goes down again, click the volume button in the earphone, just to stimulate it, set your prefferred settings for ring volume etc and then soft reset and the high earphone volume is back.
It is not a complete solution, of course, but it is better than having to raise and low the volumes after each call.
Up to now there is not a better solution to this problem.
If someone knows a better registry setting or tip solution he can post it.
Another problem also is that sometimes the last call button is accidentally pushed in the bluetooth earphone and the last call is activated.
I will try to find the setting that disables last call through bluetooth if there is any.

has anyone else tried this? I have this problem with the t-mous version of the hd2.

NIKOSXRI said:
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
Click to expand...
Click to collapse
if this works you are a life saver I have had this problem for over 3 months now with no answer I will give it a try and answer back!
edit: it works!!!

I've just tried this, and get the following error:
Error : System.FormatException: FormatException at System.Number.ParseUInt32() at System.UInt32.Parse() at RegeditService.RegeditResponse.Send() at httpserv.Services.Service.sendResponse() at RegeditService.RegeditService.Exec() at httpserv.HttpServerWorker.run()
Any ideas?

i entered the value as dec...with total commander you can change in hex also

with this cab that I found here you can restore the original wm sound manager and the HD2 'remembers' the sound volume and keeps it at the highest level even with a bt headset!

NIKOSXRI said:
If someone knows a better registry setting or tip solution he can post it.
Click to expand...
Click to collapse
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!

lawalty said:
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!
Click to expand...
Click to collapse
There is no "in call volume" setting in volume locker. Which box did you check in order to activate the in call volume?

question about bluetoth in-call volume

Updated my galaxy s to 2.2 last night and now I can do the bluetooth voice dial but the volume is too low. The Bluetooth in-call volume is set by default and 50%, how do I fix this without turning up the volume manually every call?
Thanks

to be more specific, its the womans voice that is too low when she ask for a number. How do you raise the volume by default

use the volume up/down from the bluetooth headset

im saying at the time the call number is requested, the volume bar on the phone called "bluetooth in-call volume" is at 50% and I can barely hear the womans voice unless I manualy turn up the volume on the phone. The problem is I have to do it every call and want to know how to change the default setting

No one else has this problem? I really need help with this
All the views and only one reply, can anyone at least confirm if they have the same issue?
Thanks

Have the same problem but with the nexus S on 2.3.3. I would say it is an inconvinience to keep adjusting the volume everytime you try to make a call. I have yet to find a setting to change the default.

There is an APP that will set the bluetooth volume when a headset is connected. Search market for "bluetooth volume" by nightshade. This does NOT help for the stupidly low volume of the lady that provides voice prompts though - just allows a preset override for the in call volume.

Call volume

Hello,
My in call volume is VERY loud, so much so that I'm forced to move my phone away from my face when in a call. I've tried hitting the volume buttons when in a call but they seem to make no difference to the actual volume. Am I missing a setting somewhere?
Thanks!

on call volume boost

is there an option to enable volume boost while on a call , my s3 used to show a small speaker icon when on a call , and it would enable volume boost.
but i cant seem to locate an option on the s4.

ex-28 said:
is there an option to enable volume boost while on a call , my s3 used to show a small speaker icon when on a call , and it would enable volume boost.
but i cant seem to locate an option on the s4.
Click to expand...
Click to collapse
Go to music app. Menu adapt sound. Set it up and there should be a stereo button in call after.

in the dialer, under call setting, under personalize call sound choose clear sound. then when in a call next to the HOLD button( to its right) there will be am extra volume button.

Thank you :-$
Sent from my SGH-I337M using Tapatalk 2

Asurion Fixed Screen on My SM-G935V, Now the Internal Speaker Is Too Loud and Raspy

Hi,
Someone from Asurion just fixed my front screen on my Galaxy S7 Edge (SM-935V), and now when I make or receive calls the volume on the headset is too loud and everyone sounds raspy. When I turn the volume down, they sound clear but this wasn't a problem before they fixed my screen. When I put people on speakerphone, they sound just fine. I'm in the process of contacting them and seeing if they can fix this but until I do, is there anyway to adjust the volume from an hidden menu? Or any ideas what may have happened?
Thanks for you help...