Hello at all,
I have currently installed CM6.1 on my Hero. I tried to set up CPU with setcpu little higher. After that the phone freezes some seconds after boot. I have no chance to get into setcpu settings to correct it.
What could I do? I tried to flash another Kernel like Flykernel 11 and 12 pre, but the problem still exists. Is there any way to correct it?
Thanks for your help
If you have made a nandroid backup you could just restore. Otherwise the only alternative is to reflash the rom, since all the settings will revert to standard.
Sent from my HTC Hero using XDA App
maybe see if you can adb rm the app itself (SETCPU) through recovery or fastboot?
.... I have no idea if this is possible, just a theory. If not, as Bellor said, restore a backup or reflash ROM.
'
i have installed in my device but ,, it is too slow
Related
Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.
did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
I backed up the stock firmware I already had manually, before it prompted on the flash.
did you do a full wipe before flashing the rom?
No i didn't, thought it would be safer incase something went wrong?
run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...
Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.
Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?
you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.
Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?
go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card
Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.
Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that
Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????
sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.
I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...
I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.
So i have my HTC Wildfire, which i find to be sluggish as hell. I decided i would put WildPuzzle on it to see if that was better. I have rooted the phone, made the nandroid backup, done factory reset and installed the rom.
When i boot the phone i get the purple circle boot screen but the phone will not load any further. I was wondering if anyone else has had this problem and overcome it?
I have also tried Cyanogen and got the same problem, I left the phone overnight when i tried WildPuzzle to no avail :'(
Please dont be too harsh as I am Still new to this hacking business.
Thanks in advance
Snail
snailydale said:
So i have my HTC Wildfire, which i find to be sluggish as hell. I decided i would put WildPuzzle on it to see if that was better. I have rooted the phone, made the nandroid backup, done factory reset and installed the rom.
When i boot the phone i get the purple circle boot screen but the phone will not load any further. I was wondering if anyone else has had this problem and overcome it?
I have also tried Cyanogen and got the same problem, I left the phone overnight when i tried WildPuzzle to no avail :'(
Please dont be too harsh as I am Still new to this hacking business.
Thanks in advance
Snail
Click to expand...
Click to collapse
Connect it to a pc and run logcat (google it - it's part of android sdk) and paste results here
snailydale said:
So i have my HTC Wildfire, which i find to be sluggish as hell. I decided i would put WildPuzzle on it to see if that was better. I have rooted the phone, made the nandroid backup, done factory reset and installed the rom.
When i boot the phone i get the purple circle boot screen but the phone will not load any further. I was wondering if anyone else has had this problem and overcome it?
I have also tried Cyanogen and got the same problem, I left the phone overnight when i tried WildPuzzle to no avail :'(
Please dont be too harsh as I am Still new to this hacking business.
Thanks in advance
Snail
Click to expand...
Click to collapse
Sounds like you may need to restore from a nandroid or rru
What is the actual adb command i need? I have installed it but can't find the right command.
The command is 'adb logcat' .
Sent from my HTC Wildfire using XDA App
hello all, i recently installed clockwork3.0 to try out the cm7 rom and did so. afer that i wanted to go back to cm6 but decided to try out a custom baked modaco in between. I went no problems to the modaco vision rom and then tried to go back to the cm6 and thats where i ran into the problem. It seems as if though all i can flash and boot now is the modaco vision and desire roms. i try enomther and cm and after the flash and reboot im always stuck at the HTC boot screen which i know shouldnt be there and cant format boot in cwork3.0 without failure error. Even a nandroid back to cm6 wont work. Im assuming this has something to do with the modaco rom writing some apps to /system during install. If anyone can point out my error or explain why this could happen it would be greatly appreciated. Thanke, veritasaequita
You need to flash back to the old ClockworkMod Recovery using fastboot? You have done that haven't you? CWM Recovery 3 is only for 2.3 roms atm afaik.
Cool, thanks for the input bro. Yes I sure have. I did see in the dev forum a thread titled install cw3.0 easily from phone. Is it possible to go back to the old cw by way of using the phone also? Once again thanks for your help
Sent from my HTC Vision using XDA App
oh yeah, indeed you have hit upon something. Try installing ROM manager via the Market,... then use that to re-install the old recovery.
But if that fails,... then yes, you SHOULD be able to use a Terminal Emulator to flash without using fastboot commands.
MODS: I am unsure of where to post this so sorry for the trouble.
So I work for Tmobile and love showing off my rooted mytouch 4g in all its glory.
So I requested a warranty exchange and got a TAIWAN VERSION w/ GOOD SCREEN in return. Like Day and Night.
Upon Receiving my warranty exchange phone it was 2.2.1. I attempted the same Visionary Root Process, (however was there some extra file i needed to DL? i forget)
After rooting my new phone, S-Off, I had flashed FAUX stock kernel 0.4.0b.
THEN THIS HAPPENS:
I cant get past the mytouch 4g splash screen. The first logo that appears. It gets stuck or bootloops. I can HBOOT and get into recovery 3.0.0.5
This is all i can do...i already asked for another warranty exchange...but in the meanwhile..how can i fix this problem or what did i do wrong?
ALSO can you backup one mytouch 4g and load it back up on another mytouch 4g with the same sd card? Thanks!
I had this problem with my MT4G when I flashed his kernal. It seems that his kernals are not designed to work with every 4g device. I hope you did a nandroid backup on the device. I was never able to get past the mytouch splash screen with his kernals
Sent from my HTC Glacier using XDA App
Well, at since you can get into recovery there should be a number of things you can do to get your phone to boot.
Download a new ROM to flash, if you are on clockwork 3 then you need CM7.
Clockwork has usb drive ability, turn it on, transfer the ROM then flash.
If you can get into HBoot or Recovery on ANY phone, you're safe. Hell, if you can't get into HBoot, your phone wouldn't even start up since HBoot is basically the equivalent to BIOS.
THE VERSION OF CLOCKWORKMOD RECOVERY YOU USE IS CRITICAL!!!
The version you are using is for Android 2.3 only.
Flash a v2 Recovery with adb or fastboot and reinstall your kernel, or install CM7.
HTC Glacier CM7 41
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Tiltpoet said:
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
If you've ever connected it via USB, it should have installed the drivers automatically (at least on Windows). I think the ADB driver only installs if you had "USB Debugging" checked. Mass Storage usually only refers to mounting the SD card; the driver for ADB is different. Look for something like Android Phone or Android ADB Interface in your device manager (again assuming Windows).
If you have ADB set up, try running the adb devices command. If it spits back the serial number of your phone, you should be okay to proceed.
Don't exchange the phone, fix it...
Just use another phone to copy the latest CM7 to the root of your sdcard and flash, if that doesn't work do the same thing with a PD15IMG.zip file to the root of your sdcard, hboot and restore to stock.
I have no problem with someone doing a warranty exchange for a hardware issue, but if you break your phone, don't make someone else pay for it...
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
XDA you have been so helpful!
___bonus__also the haptic feedback on this phone was not as strong as my original..though idk if its just me or not..should i call tmobile and stop shipment of the OTHER phone? how is it i have a taiwan version plum W/ good screen?
There are no Sense-based Gingerbread (Android 2.3) ROMs available now ... Best practice its to make a Nandroid backup of CM7 with your installed CWM Recovery, then flash a version 2.x of CWM Recovery to install any Froyo (Android 2.2) based ROM.
HTC Glacier CM7 41
Tiltpoet said:
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
Click to expand...
Click to collapse
Good to see it is working.
Its mostly personal preference at this point. Sense on the MT4G is pretty responsive and has some nice features. CM7 has its own tweaks and features. You loose the sense widgets but many can be replaced with alternatives in the market. You gain and loose relative in both ROMs So try out both and decide.
Use ROM Manager app to flash a new recovery. One of the 2. versions, then flash a froyo based ROM.
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Tiltpoet said:
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Click to expand...
Click to collapse
Kernels are not ROMs, the kernel is the underlying software of an OS. The kernel talks to the hardware and lets different parts of the OS communicate. Kernels are ROM specific, or Framework specific. A sense ROM can not use a AOSP kernel and vice versa.
CM ROMs can be good on battery, or not. It all depends on personal use and how you set it up.
That is a good recovery to use when flashing sense ROMs.
Not sure about the updater. If it is the one I am thinking, it hasn't been updated in a while. I think it has been abandoned in favor of ROM Manager. CM updater did come in some of his older ROMs, before ROM manager became the norm.
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
As people have already said, you used the wrong version of clockwork, also, use clockwork to flash a new rom. And make sure you use the right version.
Tiltpoet said:
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Try fix permissions. If that does not work, do a full wipe (factory reset). If that still does not work, try re-flashing the ROM.
If you flashed a new kernel before you started having issues, this may fix it, or you may need to wipe caches and re-flash the kernel.
Hope someone might be able to help.
Just got my vega and first thought was to root, backup rom and flash. Im used to doing iit with my desire so thought it would be easy!
so i,m using Visionary to root, first temp then perm. Run titamium backup that should root and backed up a couple of apps no problem. Installed rom back up v3. Back starts by reboot and then sits at android out of the box before i have to switch it off after 10 mins or so. I i still try and flash after this (or before if i miss this stage) with new rom, cant open apps or force close and wifi just says error.
Great device though
Thanks
bRim
Which rom are you trying to flash?
I use the built in applications backup, located in settings/software tool to backup apps, with no problems.
Ive tried the r8 version and one other and ive also used the app backup but wanted to get the whole rom done before a full flash.