Related
Hello,
I know this has been discussed so many times and in so many places. But I need help...
My tab came with middle east version of the firmware and it has so many things in there that I dont want. I want to install the latest European version of the firmware and I dont really care about Arabic support.
I tried this once (got the firmware from SAMFIRMWARE.com - XXJMA) and tried by luck with Odin..all I got in the end was a brick. I got samsung to bring my Tab back to life..but now I want to do it again. Could some one PLEASE give detailed descr. on how I can install the European firmware on my tab? Appreciate your help.
PS: I AM a noob!
Hi first things first make sure your tab is unlocked sim lock off
Sent from my GT-I9000 using XDA App
My tab is unlocked and the sim lock is off.
I beleive my mistake was something to do with the PIT file and repartition.
what i did was flashed JM6 first then JMA
Just select the whole JMA.tar file as PDA. No repartition, PIT, Phone or CSC.
Flash. If it doesn't reboot after flash, reboot into recovery so it completes the install. Done.
thanks for the info..but if you look at http://www.samfirmware.com/WEBPROTECT-p1000.htm it says I need to use P1.pit for both the versions. Now i am confused. Please comment....
sorry yes use p1.pit
OK. Thanks...to summarize..
1. Switch on USB debug on tab
2. kill Kies
3. Start Odin (after going to download mode on the tab)
4. select the pda file (.jar) and the .pit.
5. Ensure repartion is switched off
6. start! once this is done, repeat for the second pda file.
Some more questions...
a. Now I dont understand why I need to use the JM6 first and then the JMA. Why not directly try JMA?
b. Also, I am right about the repartition? Last time I remember when I selected the .pit file, the repartition came on automatically. But by the time I realised it, it was too late. The process had already started and it never ended.
c. How long does it normally take for the update process to end?
Thanks for your help. Hopefully this time I wont brick the tab.
im interested in this thread too. I dont really know how to flash to Euro firmware. If there is any people want to share what they did, I appreciate.
Anybody? Please help us noobs!
aidicula said:
Anybody? Please help us noobs!
Click to expand...
Click to collapse
you have to create an account here . there, on the bottom of the page you'll find a PDF file with everything what you need and also a video..enjoy
JMA is an update of JM6
that 's why you need the JM6 first
To flash it in JM6, I ve used Odin
set the pit file , the PDA PHONE and CSC
for the JMA refer to the JMA thread
1. Would someone please guide us to the JMA thread? I tried and couldnt find anything!
2. Also, there is no CSC file specified in samfirmware.com. I can see the download links for them on the website, but how do I know which one to use?
3. I just noticed on samfirmware there is a JMC version available now. Is that another update to the JM6? Can I go directly to JMC without the JMA ?
These questions should prove the 'noob' tag!
:EDIT!!
http://forum.xda-developers.com/showthread.php?t=884343
a. That has clearly explained the way to do it..but my ONLY question now is how do I know which CSC file to select.
b. The author mentioned something about 850 + 1900 and the modem. How does that affect the whole process? We would like the whole range.
READ BEFORE YOU FLASH: THIS FIRMWARE HAS A PROTECTED BOOTLOADER THAT WILL PREVENT YOU FROM FLASHING SAMSUNG OFFICIAL FIRMWARE.
MORE INFO HERE
I don't know if this process actually flash boot and spl because JM6 doesn't seem to have them, but you're on your own and I don't recommend you to do it.
Ok I'm going to make a detailed guide of how this worked for me because succeed depends a lot on which firmware you have in your tab. It's a good idea to start with JM6 since you can flash it completely if you have an older firmware or JMA (I guess you won't be able to flash it in the future if a new firmware is released). You won't lose your internal SD Card data but your phone will be factory reset.
1) Download JM6 from HERE
You'll get Odin 1.7 + PIT + PHONE + PDA + CSC.
2) Download JMA from here: HERE
3) Download JMC from here: HERE
4) Start Odin 1.7 and select:
*PIT P1_SMD_MAP.pit
*REPARTITION YES
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: CODE_P1000XXJM6.tar.md5
*PHONE: MODEM_P1000XXJM6.tar.md5
*CSC: CSC_P1000OXAJM6.tar.md5
5) Put your TAB in download mode: Turn it off, press POWER + VOL DOWN
6) Press start in ODIN and wait until process is completed. Your tab will REBOOT in download mode.
7) Now press POWER + VOL UP and when you see SAMSUNG logo RELEASE POWER BUT KEEP PRESSING VOL UP in order to enter recovery and let the TAB flash dbdata, it'll reboot and boot into android. (unplug your USB cable because Odin won't recognize it on some systems)
8) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: JMA.tar (from JMA file obviously)
*PHONE: NONE
*CSC: NONE
9) Repeat 5), 6) and 7)
10) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME.tar (from JMC file obviously)
*PHONE: NONE
*CSC: NONE
11) Repeat 5), 6) and 7)
I have an AT&T TAB and this process worked for me.
If you need 850 + 1900 you only have to flash MODEM (PHONE button in ODIN) from HERE (modem_bell_i9000.zip) with No PIT, no repartition, no PDA and no CSC.
I hope this helps anybody and sorry about my english
EDIT: If for some strage reason you get the !!! --- !!! screen in your tab, don't panic. You can start the whole process again, Odin will detect your phone, it's a download mode anyway.
EDIT2: I always choose to wipe all my data. I use Titanium backup and I can get most of my data back from there. It's better to have a functional tab than a brick full of useless data. Wiping will always be safer.
EDIT3: Made some modifications to step 7. What you need to do is to enter recovery and that's it. It wasn't clear. Now I think you'll get it right. I didn't test it without step 7 but some people seems to be doing well without doing step 7. Maybe device is entering recovery automatically and flashing dbdata on its own (this is to be expected but sometimes it just doesn't happen).
What about rooting the device before you flash...?
Working great!!! However, I just didn't do step 7 in any of the 3 updates. What exactly do you mean in step 7? Which of the 4 options should I choose in Step 7?
Thanks
pt4audi said:
What about rooting the device before you flash...?
Click to expand...
Click to collapse
I could root my device with z4root or superoneclick.
lucboucim said:
Working great!!! However, I just didn't do step 7 in any of the 3 updates. What exactly do you mean in step 7? Which of the 4 options should I choose in Step 7?
Thanks
Click to expand...
Click to collapse
When flashing ends your device should install dbdata in recovery mode. Maybe with this procedure dbdata is flashed automatically when flashing JM6 at the beginning it's not necessary to do it manually.
If dbdata is not flashed you will not be able to boot android. Your device should display something like this when that happens (in recovery mode):
E:copy_dbdata_media:cant mount DBDATA: copy default media conent failed.
Click to expand...
Click to collapse
But I guess you're ok
Just ignore step 7 if your device entered recovery mode automatically after flashing ended.
OP , did U enable the voice capabilities ? And what was your initial firmware ?
Do U feel confident to say that you can str8 go from whatever FW you have to JM6 as a full flash , and not anymore move your way up from JJ4 (russian FW ) ?
P
pakalrtb said:
OP , did U enable the voice capabilities ? And what was your initial firmware ?
Do U feel confident to say that you can str8 go from whatever FW you have to JM6 as a full flash , and not anymore move your way up from JJ4 (russian FW ) ?
P
Click to expand...
Click to collapse
If by voice capabilities you mean putting a sim card, yes, I tried and it works fine. I didn't test it that much, just a few calls and a lot of gprs. My initial firmware was jk5.
If I had a firmware older than JJ4 I'd just try to flash JM6 directly. I'm guessing here but I think that flashing JM6 the way I flashed it (following another guide in another forum) is like a full flash, it shouldn't matter what you had before.
Maybe someone with more knowledge could throw a light in here. What I can tell you is that I'd do it. I'm one of those guys that learn the hard way, and I've never bricked a device for good.
You're like me then. I do not even have my Tab yet but my fingers are already so much itching. In the meanwhile I am reading and learning. I am totally new to Samsung but I've had my hands busy for the past year with my Nexus One, so quite confortable playing with rom/kernel/radio world .
P_
Flashing for morons
Monrad, thanks, this is a super post.
Just for me and all the other morons in the world. Can you also please give a basic run through of what you've done. I have the following questions.
1) You have 3 waves of activities in your post: JM6, JMA, JMC. Generally, what is each wave doing?
2) Please would you also explain what the fields in Odin1.7 are for?
*PIT -does this set the partitions on Samsung tab?
*REPARTITION -if PIT file this is automatically selected
*AUTO REBOOT YES -why do I select yes
*F. RESET TIME YES -what's this one for?
*PDA: CODE_P1000XXJM6.tar.md5 -PDA is core PDA firmware?
*PHONE: MODEM_P1000XXJM6.tar.md5 -what does this do? load modem drivers?
*CSC: CSC_P1000OXAJM6.tar.md5 -I'm not sure what CSC stands for and does?
3) With regards to getting my dirty hands on the right firmware, when I go to http://www.samfirmware.com/WEBPROTECT-p1000.htm, I look at the latest firmware for Europe. At the bottom of the list are 3 downloads:
a) JM6, b) JMA, c) JMC. What are the differences between these firmwares. I understand that J = 2010, but don't know how to decrypt last two digits.
4) Which PIT should be used in Step 1 of your sequence? What are the PIT files at the bottom of the page (in Flash Tools Section) of http://www.samfirmware.com/WEBPROTECT-p1000.htm
5) I bricked my tab. I got it alive again, only by loading the JMA via Odin 1.7. Basically I put my Tab in Download Mode. Started Odin1.7. Used the Eur Pit file (referred to in my Step 4), and then loaded JMA.tar (extracted from JMA file mentioned in my Step 3). With all the check marks checked in Odin. That was it, and my Galaxy Tab rebooted and seems to work totally fine. Why would I do the other steps mentioned in your sequence? What benefit is there?
5a) Note when I do *#1234# I get:
PDA: blank
PHONE: P1000XXJMA
CSC: blank
the PDA and CSC show blank....is that why I should first load JM6 and follow your sequence? What functionality do I currently not have because of these blanks?
6) A question on rooting my Tab... what are the benefits to doing this?
Thanks for dealing with my long winded post! I really appreciate what you've done so far.
You are a good man, Monrad!
I followed steps and got my AT&T tab updated.
A word about wiping data: I had my Tab fully set up with original AT&T firmware and then I started installation I got into lots of trouble. Instead of recovery mode it went into blank screen with vertical white line (I suspect it did dbdata update behind it though), then it rebooted and my apps started crashing.
The only way to fix it was to get to setting and do factory reset. After that everything went by the book.
So you may want to clarify that data must be wiped from Android, unless you have some other way.
Thanks again
How and where do I find the Dbdata file ?
When I go for step 7 i get the "can´t mount" and "media content failed" messages.
Edit:
alexnoalex said:
So you may want to clarify that data must be wiped from Android, unless you have some other way.
Thanks again
Click to expand...
Click to collapse
I believe this can also be done from recovery.
i used roto-jmc and dont boot into recovery of flash dbdata.rfs seperately and everything is working fine.
kromosto said:
i used roto-jmc and dont boot into recovery of flash dbdata.rfs seperately and everything is working fine.
Click to expand...
Click to collapse
Where did you get the Roto-jmc?
from the link
http://forum.xda-developers.com/showpost.php?p=9989856&postcount=50
Great man. Thanks.
Edit: didn´t help. I still get the same errors.
I now seems to work. But my *#1234# says jm6 even on the jmc firmware?
Anybody knows what is the differences between JMA and JMC ?
You don't need to flash JMA. You can go straight from JM6 to JMC
You can skip oen unnecessary step
Can i do this on my euro Tab from Denmark?
Im on JM6
Sent from my GT-P1000 using XDA App
Just did the update from JMA on a euro tab, I took the firmware from samfirmware not the one on the first post. I don't know the difference but the size is not the same..
Everything works fine, even without doing a factory reset, all my applications are working fine.But I don't see any differences between JMA and JMC
Guys
Currently i have
PDA: P1000JPJJ1
PHONE: P1000JXJJ1
CSC: P1000OJPJJ3
Its currently arabic firmware. Can i use this guide & update to this Euro fimrware? I dont need arabic. I am not rooted as well. Will this guide work for me?
i have a problem, all ok till JM6
and tab after start fine
but for JMA or JMC no dbdata in recovery
help me (for now i'm back to JM6)
Rather than having scattered info on this topic I have created one Thread to have all info on this subject, any opinions, contributions and info will be really appreciated. Your actions your Risk
Firmware Update Guide:
Option 1 (Advance users):
1. Download Check Fus downloader 2.1 from Here
2. Open it and in "standard Window Tab" select "Android", "GT-N7000" and "region"
3. click "check firmware"
4. See in "Result" if that's the firmware you want, click download and save
5. once downloaded click "advance" on check fus downloader and browse to location of file (file name something like this GT-N7000_XEU_1_20111121215303.zip.enc2) (normally it automatically decrypts it) and click "Decrypt firmware"
5. The decrypted file (XXXXXXXXXXXXXX.tar) will be save in same location as downloaded enc2 file >>>>Open Odin and click PDA to browse to (tar) file
6. Select pit Q1_20110914_16GB.pit file in "Pit"
7. Check Re-Partition, Auto Reboot, and F. Reset Time in Odin
8. Recovery Mode- Put phone into Download Mode: press Volume Down + Home+ Power, then press Volume Up.- Connect USB cable to phone and make sure the program detect it. (If computer does not detect try again or restart computer or disable Antivirus or put phone is Debugging mode (connect to computer) and back to MTP mode (connect again)
9. Click Strat button and wait till the program finishes the process.
10.- After the phone restarted disconnect USB cable.
you should have it flashed (be patient it takes some time on 1st loading). If you get Samsung Logo loop (or stuck) Reset phone from recovery and restart above process
Option 2 (if you Got/downloaded 3 file)
- Run (open) Samsung N7000 Galaxy Note Downloader (Odin3 v 1.85) .
- Check these options: Re-Partition, Auto Reboot, and F. Reset Time.
- Now you have to select Pit file and Firmware files too like this (click & browse):
PIT: Q1_20110914_16GB.pit
PDA: CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.m d5
PHONE: MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5
CSC: GT-N7000-MULTI-CSC-Oxxxxx.tar.md5
- Put phone into Download Mode: power off the phone, wait for a minute and at the same time press (Volume Down + Home + Power) buttons, you will see recovery mode, if not take out battery, re-insert it and press again vol down+menu+power buttons simultaneously
- Connect USB cable to phone and make sure the program detect it (Comm 2-Yellow box).
- Click Start button and wait till the program finishes the process. (takes couple of minutes)
- After the phone restarted disconnect USB cable.
- 1st boot takes some time so be patient
- If stuck in Boot animation (samsung logo) Take out the Battery, leave it for 5 minutes, and re-insert battery, Press (Volume Up+Menu+Power button) simultaneously to enter Recovery mode, once in recovery Mode, do a factory reset and repeat above process
For Rooting (See Dr. Ketan Post) "Edit 16Nov 11 Simplified" work Perfect, click here for Link
Credit: Tsar3000, Sammobile, Dev. Johnan, Dr. Ketan and all contributors
3. Mobile Odin:
The easiest way to flash new roms while keeping Root
its a paid app
https://market.android.com/details?id=eu.chainfire.mobileodin.pro&hl=en
or
http://forum.xda-developers.com/showthread.php?t=1347899 (read his manual)
Download Firmware from Sammobile.com and unzip it in PC, then copy all unzip file to phone via USB
your phone must be rooted to use Mobile Odin
after copying files in phone, open Mobile Odin app
Click "open File" to navigate to "Code" zip file, select it and follow the Chairfire manual...
FOR Stock Rom Code understanding read this
http://www.sammobile.com/firmware/?page=1&t=1
Thank you for the guide, I have a couple of questions..
1.Does the Note has to be rooted to be able to upgrade?
2.Will the yellow triangle appear on boot after doing this upgrade?
Brgds... /Tubgirl
No you don't need to be rooted to upgrade
No triangle if stock ROM is used
Tubgirl said:
Thank you for the guide, I have a couple of questions..
1.Does the Note has to be rooted to be able to upgrade?
2.Will the yellow triangle appear on boot after doing this upgrade?
Brgds... /Tubgirl
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
does the software extract the .tar-file by itself?
Because I only get the same zip file, no file shows up.
Thanks Dear useful info it is, just to simplify it a bit
It is easy to find Product Code by dialing *#272*imei#*
IMEI number can be found via dialing *#06#
PDA/CSC/Phone info can be found by dialing *#1234# in dialer
Suprnova_ said:
A really good guide, just what I needed.
I would make an addition for regions or product codes that isn't available in this software, for example the nordic region with swedish product code.
To get the firmware thru check fus it is however possible to manually insert the codes needed.
To do this follow these steps:
1. start regedit and go to HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\
2. Start with finding the product code, to do this search for a line called ProductCode and in that line you'll find the product code, in my case it is GT-N7000ZBANEE
This code is what you write in Check Fus in the Product Code field.
3. Now to find the software codes, PDA/CSC/PHONE.
To do this search for a line called HIDSWVER
Here you'll find a long string of codes, In my case it shows up as
N7000XBKK4/N7000OXXKK5/N7000XXKK5/N7000XBKK4
The names in colour are the ones that we want, fill them in as written here.
Purple = PDA
Red = CSC
Green = Phone
Finally, press download and save.
When this continue from step 5.
(feel free to rewrite this text as my english isn't that good anymore)
And if included in the above guide, delete this post.
Click to expand...
Click to collapse
nasgilani said:
Thanks Dear useful info it is, just to simplify it a bit
It is easy to find Product Code by dialing *#272*imei#*
IMEI number can be found via dialing *#06#
PDA/CSC/Phone info can be found by dialing *#1234# in dialer
Click to expand...
Click to collapse
That was a bite easier yes
Thank you
But what about the file?
Is it going to be extracted aswell? Because I only have the same .zip file as before, no new .tar file
Or do I extract it from the .zip myself?
You can decrypt/extract yourself the .enc2 file to get .tar file
Suprnova_ said:
That was a bite easier yes
Thank you
But what about the file?
Is it going to be extracted aswell? Because I only have the same .zip file as before, no new .tar file
Or do I extract it from the .zip myself?
Click to expand...
Click to collapse
Yes itmay be single file after extraction, inthis case select just PDA
DONT SELECT RESET PARTITION
dr.ketan said:
Yes itmay be single file after extraction, inthis case select just PDA
DONT SELECT RESET PARTITION
Click to expand...
Click to collapse
I did both reset and format partition from odin (desktop) worked flawlessly.
Why am I not supposed to do that?
---------- Post added at 07:18 PM ---------- Previous post was at 07:10 PM ----------
nasgilani said:
Thanks Dear useful info it is, just to simplify it a bit
It is easy to find Product Code by dialing *#272*imei#*
IMEI number can be found via dialing *#06#
PDA/CSC/Phone info can be found by dialing *#1234# in dialer
Click to expand...
Click to collapse
Got the stock rom, worked without a problem.
But, there is always a but, When I flashed this stock rom with mobile Odin it seemed to work, but when done flashing and rebooting this message shows up "logo_q1.jpeg draw failed"
I have no idea why this happend.
The only thing I could do was to go into download mode.
Solved it however by flashing with odin on pc and it worked again.
That is really helpful. Thank you.
Is it possible to use a different region? I have a UAE version, but would like to use the Europe ROM.
Yes you can by using Odinv3 1.85, see the instruction in original thread for it. you can download firmware either using Fus downloader or from www.sammobile.com or www.tsar3000.com. If you do it using Fus downloader you will have 1 file to flash as PDA
magxs said:
That is really helpful. Thank you.
Is it possible to use a different region? I have a UAE version, but would like to use the Europe ROM.
Click to expand...
Click to collapse
magxs said:
Is it possible to use a different region? I have a UAE version, but would like to use the Europe ROM.
Click to expand...
Click to collapse
You can actually do even more, you can switch the product code of your Note to make it look like a complete european version. What I did:
-Checked original product code which was KOR (*2767*4387264636#)
-Got AUT (Switzerland) XXKA rom off FusDownloader
-Flashed this rom and repartitioned phone with Odin
-Changed product code to AUT (*#272*[IMEI]#)
-Phone restarted, did complete wipe and applied AUT csc
-My phone now reads as AUT model
Thanks a lot for this guide!
I'm still new to flashing Samsung devices (last week I finally replaced my Milestone with a Note), so this is really helpful.
If I may ask a dumb question though:
Does flashing an official firmware this way revert the phone to stock completely?
I rooted my Note and installed CWM according to dr.ketan's simplified guide and flashed RiverSource's FM-Kernel using Mobile ODIN Pro to get rid of the power drain issue.
But I'm still unsure if I'm going to keep the phone (because its display issues among other things), so I might have to "clean up" the phone again.
Will this guide remove root, CWM and the modified kernel and is it save to return the phone after only following this guide?
Thanks a lot in advance!
i download the official rom that i want but i cannot fin the Q1_20110914_16GB.pit .where is???
It's attached in original post with Odin zip file
kolokas said:
i download the official rom that i want but i cannot fin the Q1_20110914_16GB.pit .where is???
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
Yes it will take u to stock ROM and remove any custom roms plus root. In other word flashing stock roms brings phone back to original condition unless no triangle and Counter is there at start
Abnovitas said:
Thanks a lot for this guide!
I'm still new to flashing Samsung devices (last week I finally replaced my Milestone with a Note), so this is really helpful.
If I may ask a dumb question though:
Does flashing an official firmware this way revert the phone to stock completely?
I rooted my Note and installed CWM according to dr.ketan's simplified guide and flashed RiverSource's FM-Kernel using Mobile ODIN Pro to get rid of the power drain issue.
But I'm still unsure if I'm going to keep the phone (because its display issues among other things), so I might have to "clean up" the phone again.
Will this guide remove root, CWM and the modified kernel and is it save to return the phone after only following this guide?
Thanks a lot in advance!
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
Great news, thanks for the answer!
nasgilani said:
Yes it will take u to stock ROM and remove any custom roms plus root. In other word flashing stock roms brings phone back to original condition unless no triangle and Counter is there at start
Click to expand...
Click to collapse
Suprnova_ said:
I did both reset and format partition from odin (desktop) worked flawlessly.
Why am I not supposed to do that?
[
Click to expand...
Click to collapse
When you are not having pit (partition index Table) file, You shud not select it
(in case of single file-PDA)
Many have brick devices
Check fus +Odin mobile
Sent from my GT-N7000 using xda premium
Odin is the saviour tool for all Samsung devices. The method for flashing by Odin differs from device to device.
This thread will give step by step instructions on how to flash a stock rom from Odin on the GT-I9070/p :
A. Download Odin tools from here : http://d-h.st/3zJ
Pass : shaaan
B. Download the stock rom from www.samfirmware.com
Setting up Odin :
1. Make sure you have installed the necessary drivers for this device. The drivers can be installed from within KIES or seperately. (I will upload the drivers shortly).
2. Run Odin as administrator.
3. Setting up the files is divided in two types depending on the firmware type :
a. If the firmware is a multi package file, put the files in the corresponding sections.
ie. CSC file in CSC section, PDA file in PDA section.
b. If the firmware is a single package, add the single file in the PDA section.
4. Now that Odin is setup, put the phone in download mode. To do that, power off the phone and press 'home+power+volume down' buttons together. Keep the buttons pressed till Download mide appears.
5. Now that Odin and the phone are setup, connect the phone to the device. Odin will detect the device and show something like 'com port (1)'
6. Flash the device.
7. The flash will take 5 minutes for a full flash on average.
8. When the flashing is complete, DO NOT remove the device until Odin shows ' PASS '.
9. The device will reboot. Remove the device, go to recovery mode and do a factory/data reset.
That's it. Happy flashing peeps..!!
Awesome guide mate - messing around with our device without Odin is risky !
This should be sticky. A lot of people is asking how to revert to original FW, or similiar questions that is connected to reverting. And it is almost at the end of forum, and thay cant see it.
I pmed the mods to do it. But they won't budge..
Please pm them..
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Very good guide,good work !
It may be better if you add some images
atishey23 said:
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
th3cr0w said:
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
Click to expand...
Click to collapse
It is normal to have 4GB on internall SD. The rest of it goes to system partition, application partition and RAM I think...
shut_down said:
It is normal to have 4GB on internal SD. The rest of it goes to system partition, application partition and RAM I think...
Click to expand...
Click to collapse
googled a bit more and found it out too :crying:
BTW - both of those 8GB .pit files are identical (according to 'comp' tool in windows) so there is no reason to use re-partition - other than sth went totally wrong and you are trying to recover from brick or sth serious as this .pit file is already on your device.
Just flashed unbranded stock for XEO region - original one was branded.
NOTE to anyone who is still thinking about safety of this method:
After initial reboot - when it was reconfiguring in recovery mode - or however you will call it (just before odin should say 'pass' - still in that little font screen) windows started to reinstall usb drivers - odin log in bottom corner said 'disconnected' and even then my newly flashed ROM is working as it should. I would rather keep it connected till Odin confirms all went as intended but in case of similar issue - do not get heart attack
odin is used for flashing stock roms only???
Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
nope it can also be used to flash custom Roms and kernels though flashing custom kernels via odin will increase your bin counter !
Hello guys...
How are you? I´m new on the i9070 threads!!! I´ve had others phones before, like SG2, xperia sola, live with walkman... so, i need the password to descompress odin... i search on thread but i don´t found it...
SORRY I found the password... shaaan
Of what I understand, can I test an unlimited number of stock firmware and the binary counter remain 0?
If I flash an unbranded firmware can I use SIM cards from other providers?
Now my phone is branded and I can not use SIM cards from other providers.
Thanks.
Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
Read please, sir!
http://forum.xda-developers.com/showthread.php?t=1985199
:laugh:
Someone help me? LINK
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
sonimayurp said:
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
Click to expand...
Click to collapse
Try to remove .md5 from filename.
shut_down said:
Try to remove .md5 from filename.
Click to expand...
Click to collapse
Hmm it worked thx..
Flash JB
Hi, I want to flash Jelly Bean , do i need to use the pit file , or just select one package and then select the rom??
Edit : flashed
This version of Odin does not work when flashing JB to my device.
I successfully used Odin3v3.07 from this post: http://forum.xda-developers.com/showthread.php?t=2086965
Please update this guide. I spent quite a lot of time trying to figure out what was wrong.
Thanks
Hello, i recently purchased my galaxy s4 from online which came from Honk Kong, Because it is from there i believe it has the honk kong/chinese firmware on it (I9505ZHUAME3), I live in Australia so i want to flash it with its firmware (I9505XXUBMEA),so i have downloaded the australian firmware and kernel files, my phone is currently not rooted (i dont believe i need to root for a stock firmware?), Just wondering when i put my phone in download mode and open up odin, do i only need to put in the firmware file into pda or will i need to get a csc file or whatever the 'phone' button file is for aswell. Just making sure as i only got it the other day and dont want to screw it up. Thanks in advance!
eNormini said:
Hello, i recently purchased my galaxy s4 from online which came from Honk Kong, Because it is from there i believe it has the honk kong/chinese firmware on it (I9505ZHUAME3), I live in Australia so i want to flash it with its firmware (I9505XXUBMEA),so i have downloaded the australian firmware and kernel files, my phone is currently not rooted (i dont believe i need to root for a stock firmware?), Just wondering when i put my phone in download mode and open up odin, do i only need to put in the firmware file into pda or will i need to get a csc file or whatever the 'phone' button file is for aswell. Just making sure as i only got it the other day and dont want to screw it up. Thanks in advance!
Click to expand...
Click to collapse
This should answer all of your questions. If you are still unsure, let me know.
"How to do it:
Step 1) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 2) Now open ODIN on your PC and connect your Galaxy S4 to your computer.
Step 3) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 4) unzip the downlowded file (from second or third post), u will get a Home.tar file.
Step 5) click on pda (in odin) and choose the file "Home.tar"
Step 6) check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart (first boot will take a longer time so don't panic)"
C.Sweat said:
This should answer all of your questions. If you are still unsure, let me know
Click to expand...
Click to collapse
I did view this before, but i was unsure if it did what i wanted, i want it so if i did buy my galaxy s4 in australia it would have all the same stuff like csc and pda etc ,
eNormini said:
I did view this before, but i was unsure if it did what i wanted, i want it so if i did buy my galaxy s4 in australia it would have all the same stuff like csc and pda etc
Click to expand...
Click to collapse
Thats fine but you need to read throughout the whole thread and use the search function to find answers to your questions. See here within the thread for your answer.
If ive been of any help, hit the "Thanks" button :good:
C.Sweat said:
Thats fine but you need to read throughout the whole thread and use the search function to find answers to your questions. See here within the thread for your answer.
If ive been of any help, hit the "Thanks" button :good:
Click to expand...
Click to collapse
Thanks heaps, one last thing, do i have to be rooted?, i am currently running the stock firmware.
eNormini said:
Thanks heaps, one last thing, do i have to be rooted?, i am currently running the stock firmware.
Click to expand...
Click to collapse
No
↙
C.Sweat said:
No
↙
Click to expand...
Click to collapse
Thankyou for the help, appreciate it
eNormini said:
Thankyou for the help, appreciate it
Click to expand...
Click to collapse
No problem. Good luck