I have used multiple Android builds and have used Desire, Froyo, etc. and with every build (currently using DarkStone's 2.2 build), I have had problems sending and receiving MMS messages. I cannot send nor receive them at all. I receive network errors every attempt, no matter the build, no matter if I update the zImage. Has anyone else had this problem or might know of a solution?
TMO HTC HD2
PutoFace said:
I have used multiple Android builds and have used Desire, Froyo, etc. and with every build (currently using DarkStone's 2.2 build), I have had problems sending and receiving MMS messages. I cannot send nor receive them at all. I receive network errors every attempt, no matter the build, no matter if I update the zImage. Has anyone else had this problem or might know of a solution?
TMO HTC HD2
Click to expand...
Click to collapse
Are you able to access the net? It may be your APN/DNS settings, etc.
Yes, I am able to access the net. Everything in the build seems to run pretty smoothly, except for sending/receiving MMS.
PutoFace said:
Yes, I am able to access the net. Everything in the build seems to run pretty smoothly, except for sending/receiving MMS.
Click to expand...
Click to collapse
Check in your APN and what's there for you MMS?
Everything should be explained here:
http://forum.xda-developers.com/showthread.php?t=774672
Thank you for the link pretzdothack!
However, I have tried the various settings suggested by several users and still have MMS messages not going through (have deleted and attemted to resend as well).
The last set of settings I used were the following:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: h ttp://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (if you have this)
MCC: 310
MNC: 260
APN Type: default,supl,mms (instead of this setting, i used internet+MMS)
Correction, I have used these settings and it seems to work.
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
PutoFace said:
Thank you for the link pretzdothack!
However, I have tried the various settings suggested by several users and still have MMS messages not going through (have deleted and attemted to resend as well).
The last set of settings I used were the following:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: h ttp://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (if you have this)
MCC: 310
MNC: 260
APN Type: default,supl,mms (instead of this setting, i used internet+MMS)
Click to expand...
Click to collapse
I have settings in my thumbnail pic that you may want to try, if you haven't already. Make sure that you DNS settings match your APN
deadmansink said:
I have settings in my thumbnail pic that you may want to try, if you haven't already. Make sure that you DNS settings match your APN
Click to expand...
Click to collapse
Did you try this? Does it work?
tried settings on mdj's gingerbread build and its working. wasnt working before so thank you sirs
PutoFace said:
Correction, I have used these settings and it seems to work.
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
Click to expand...
Click to collapse
Thanks these settings work for MIUI builds as well
Sent from my htc_bravo using XDA App
deadmansink said:
I have settings in my thumbnail pic that you may want to try, if you haven't already. Make sure that you DNS settings match your APN
Click to expand...
Click to collapse
what are DNS SETTINGS, how do you change them (to what) and why? I seem to have sporadic success with mms. if these settings can make my transmissions reliable i would greatly appreciate it.
steve austin said:
what are DNS SETTINGS, how do you change them (to what) and why? I seem to have sporadic success with mms. if these settings can make my transmissions reliable i would greatly appreciate it.
Click to expand...
Click to collapse
They are listed in your build.prop file: using a file explorer go to system/build.prop change dns settings. As a default they are set to google's and some carriers do not recongnize.
deadmansink said:
They are listed in your build.prop file: using a file explorer go to system/build.prop change dns settings. As a default they are set to google's and some carriers do not recongnize.
Click to expand...
Click to collapse
thanks. i have these settings. what exactly am i looking to chane or match up?
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
steve austin said:
thanks. i have these settings. what exactly am i looking to chane or match up?
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
Click to expand...
Click to collapse
These are you APN, not DNS, settings and they are fine except mine in the APN type says not set.
deadmansink said:
These are you APN, not DNS, settings and they are fine except mine in the APN type says not set.
Click to expand...
Click to collapse
yes, these are the apn settings. my question is what am i supposed to look at here to correlate or match up with with the dns settings? thanks in advance.
steve austin said:
yes, these are the apn settings. my question is what am i supposed to look at here to correlate or match up with with the dns settings? thanks in advance.
Click to expand...
Click to collapse
Sorry about that, there is nothing that needs to "match" between the two...I was wrongly pointing to the match of my settings for both.
Related
Has anyone with USA tmobile been able to send an MMS. I can receive them, but they don't seem to want to send at all. Any workaround to this?
Silenced said:
Has anyone with USA tmobile been able to send an MMS. I can receive them, but they don't seem to want to send at all. Any workaround to this?
Click to expand...
Click to collapse
I'm running dan1j3l LeoFroyo Sense RC1, and I've got the same issue. I'm pretty sure they know about it...it's one of the bugs yet to be worked out. In the meantime, I've just been attaching pics to an email.
+1 on this. Its not a show stopper but it sure is annoying. I know I can't expect full functionality yet...
Sent from my dang WinMo phone using an Android application
Silenced said:
Has anyone with USA tmobile been able to send an MMS. I can receive them, but they don't seem to want to send at all. Any workaround to this?
Click to expand...
Click to collapse
I have tmo usa and mms working fine in and out for me on darkstone froyo, on hspa and edge. are your mmsc settings under the apn set correctly? should be MMSC: http://mms.MSG.eng.t-mobile.com/mms/wapenc. hope this helps.
84Gti Guy said:
I have tmo usa and mms working fine in and out for me on darkstone froyo, on hspa and edge. are your mmsc settings under the apn set correctly? should be MMSC: http://mms.MSG.eng.t-mobile.com/mms/wapenc. hope this helps.
Click to expand...
Click to collapse
I also am using darkstones froyo and cant get mms to work... have tried i think all the setting. i searched and searched with no luck
84Gti Guy said:
I have tmo usa and mms working fine in and out for me on darkstone froyo, on hspa and edge. are your mmsc settings under the apn set correctly? should be MMSC: http://mms.MSG.eng.t-mobile.com/mms/wapenc. hope this helps.
Click to expand...
Click to collapse
Thanks for the help, but I do have those settings. Still not working unfortunately.
Sent from my HTC Desire using XDA App
I tried both dan's and darkstones's froyo builds. I can only receive but not send.
Could this have something to do with tmobile? maybe a reset of some sort?
Just to let everyone know. I am using a T9193 with ATT. No matter what android build I try I have the same issue. I can receive MMS but not send MMS. So I don't think it is a T-mobile issue only.
I can sent and receive them if my internet in on.
I have the same problem. But someone on the other thread said a different rom like the miri 17.6 fixed it. I still haven't tried it myself tho.
doing a little research about the builds and this question would be answered.
outgoing mms is not working quite yet on most builds. just sit tight.
It's working just have to get your apn right, just got mine working 10mins ago from the thread here
Sent from my HTC Desire using XDA App
^ thats not for everyone
MMS Settings
I have Darkstone Froyo V1, with Cotulla 8/3/2010 zImage, an i was able to get my MMS working, these are the settings i have using:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.050
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: Blank
APN TYPE: default,supl,mms
After you set it up, reboot back into Android then connect to a Wifi network sent out an MMS then Disable Wifi and try sending another MMS via the Mobile Network, Also this assuming you have T-Mobile US, if it does not work try these settings.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MCC: 310
MNC: 260
APN Type: (leave this blank)
Hope this helps!
jada'sworld said:
I have Darkstone Froyo V1, with Cotulla 8/3/2010 zImage, an i was able to get my MMS working, these are the settings i have using:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.050
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: Blank
APN TYPE: default,supl,mms
After you set it up, reboot back into Android then connect to a Wifi network sent out an MMS then Disable Wifi and try sending another MMS via the Mobile Network, Also this assuming you have T-Mobile US, if it does not work try these settings.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MCC: 310
MNC: 260
APN Type: (leave this blank)
Hope this helps!
Click to expand...
Click to collapse
No dice for me with these settings. I managed to send a small picture with the default settings, but anything else is no go.
My phone also keeps bouncing between H and 3G whenever it needs to send / recieve data. But my speeds are incredible slooooow. 30kB/sec down and about 4 kB/sec up.
Thoughts?
Ok my problem is with the new zimages mainly shubcraft and 8/24 netripper I can no longer access secure site such as my online banking or even my gmail thru the browser. Anyone else having this problem. Please help..
Sent from my HTC HD2 using XDA App
I'm having this same problem. Anyone found a fix for it yet?
I was having this problem before. For me it was due to my apn settings. Check to see if you have a proxy set in your apn settings.
ie:
Name: T-mobile US
APN: epc.tmobile.com
Proxy: Not Set <-----make sure this is not set
Port: Not Set
Username: Not Set
Server: internet2.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
Authentication type: Not set
APN type: Not set
Hope this helps.
I have an unlocked aria with liberated Rom from ATT on t-mobile and need the mms settings
Please.
Sent from my HTC Liberty using XDA App
sna66 said:
I have an unlocked aria with liberated Rom from ATT on t-mobile and need the mms settings
Please.
Sent from my HTC Liberty using XDA App
Click to expand...
Click to collapse
APN: wap.voicestream.com or internet2.voicestream.com
User Name And Password: guest (for the 2nd APN only) leave in blank
NEW APN: epc.tmobile.com no username or password
hiptop.t-mobile.com User Name: dummy Password: dummy
Timeout: 15 minutes
Primary gateway IP: 216.155.165.50
Port: 8080
Secondary gateway IP: 216.155.165.50
Port: 8080
MMS Mmsc Server: http://216.155.174.84/servlets/mms Proxy: 216.155.165.050:8080
or
MMSC URL: http://215.155.174.84/servlets/mms
MMSC Proxy: 215.155.165.050
MMSC Port: 8080
Connection Mode: TCP with Proxy
Network Profile: (mine's named T-Mo Web)
When you edit your Network Profile make sure your settings are:
Bearer: GPRS
Authentication: No Auth
User Name: (leave blank)
Password: (leave blank)
APN: wap.voicestream.com
Hopefully this helps
Not sure about what is what
I am using an unlocked Aria on AT&T and would like to know which specific fields should contain what for the T-Mobile APN etc.
When I go to: menu > settings > Wireless and Networks > Mobile Networks > Access Point Names. I then create a new APN Which has some required fields. Some of the ones you mention above are obvious while others are not. Can someone help fill in the blanks?
Name:
APN:
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MMS protocol:
MCC:
MNC:
Authentication Type:
APN Type:
After setting this are there any other settings that should be changed to get on a T-Mobile network?
Will I be able to switch to the different APN profiles for sdifferent SIM cards with out a problem or will I have to reenter this data?
Thanks!
shibed said:
I am using an unlocked Aria on AT&T and would like to know which specific fields should contain what for the T-Mobile APN etc.
When I go to: menu > settings > Wireless and Networks > Mobile Networks > Access Point Names. I then create a new APN Which has some required fields. Some of the ones you mention above are obvious while others are not. Can someone help fill in the blanks?
Name:
APN:
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MMS protocol:
MCC:
MNC:
Authentication Type:
APN Type:
After setting this are there any other settings that should be changed to get on a T-Mobile network?
Will I be able to switch to the different APN profiles for sdifferent SIM cards with out a problem or will I have to reenter this data?
Thanks!
Click to expand...
Click to collapse
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.50
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 261.155.165.050
MMS Port: 8080
MMS Protocol: WAP 2.0 (don't know if this is important)
MCC: 310
MNC: 260
APN Type: (leave this blank)---this could be(default,supl,mms) try both ways if one does not work
I don't use the proxy settings and am curious, besides semi faster website loading due to caching, would it allow me to download mms over wifi?
Sent from my Liberty using Tapatalk
I've been trying for days to get this to work, I would get MMS to send but no internet and wont be able to download an MMS. I would be able to send an MMS but my number would come up as someone different. I haven't found a working config online for the Android Builds on MMS so I hope this helps everyone. it doesnt lift the 300kb limit, but I'm just freaking excited it works.
Go to Settings >> Wireless & Networks >> Mobile Networks >> Access Point Names >> then create a new APN with these settings
Name: T-Mobile
APN: internet2.voicestream.com
Proxy: 216.165.155.050
Port: 8080
Username: not set
Password: not set
Server: internet2.voicestream.com
MMSC: http://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: not set
I hope this helps anyone that has been trying to use web2go on there HD2 Android builds!!! And I also hope this isn't a repost because I'd be highly upset because I couldnt find the configuration anywhere! Enjoy and please let me know if it works for you guys!
Using a proxy(not the mms proxy the other one), I was unable to access secure sites in the browser.
Here are my settings on web to Go plan on T-Mobile
Name: T-Mobile
APN:internet2.voicestream.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server:epc.tmobile.com
MMSC: http removed so i can post://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,supl,mms,hipri
Under setting Network Mode GSM/WCDMA Auto
I am able to receive mms clear pic's and large. I was using the setting that you had a few weeks back and it was not working out. I am now running this one and can send and receive.
I am radio baseband 2.15.50.14
MDJ FroYo Sense Clean v. 2.4 kernel MDJ S6.1
I hope this helps
firenrescue said:
Here are my settings on web to Go plan on T-Mobile
Name: T-Mobile
APN:internet2.voicestream.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server:epc.tmobile.com
MMSC: http removed so i can post://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,supl,mms,hipri
Under setting Network Mode GSM/WCDMA Auto
I am able to receive mms clear pic's and large. I was using the setting that you had a few weeks back and it was not working out. I am now running this one and can send and receive.
I am radio baseband 2.15.50.14
MDJ FroYo Sense Clean v. 2.4 kernel MDJ S6.1
I hope this helps
Click to expand...
Click to collapse
These settings right here are excellent!!!! after searching around for a hour. Things finally work!
Excellent !!! my internet is working now, thanks
Hi I'm new to the forum, I have a question how come I dont have the mms protocol as an option on the apn settings?
I'm on hd2 android with web2go, running same radio and androidversion, tried both sets of settings, and neither work..keep getting transient error message. anyone else?
firenrescue said:
Here are my settings on web to Go plan on T-Mobile
Name: T-Mobile
APN:internet2.voicestream.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server:epc.tmobile.com
MMSC: http removed so i can post://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:216.155.165.50
MMS Port: 8080
MMS Protocol: Wap 2.0
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,supl,mms,hipri
Under setting Network Mode GSM/WCDMA Auto
I am able to receive mms clear pic's and large. I was using the setting that you had a few weeks back and it was not working out. I am now running this one and can send and receive.
I am radio baseband 2.15.50.14
MDJ FroYo Sense Clean v. 2.4 kernel MDJ S6.1
I hope this helps
Click to expand...
Click to collapse
Well sending and receiving work for me, but pics are small filesize and blurry. Oh well.
bobblesss said:
These settings right here are excellent!!!! after searching around for a hour. Things finally work!
Click to expand...
Click to collapse
On my pictures, it always says "Generic Network Failure"
I am using the settings quoted. and i have their unlimited Data Plan. I have full Internet, Texting, and calling. But no PICTURE messaging. Thanks!
wow, I owe you a lunch for these. I can't believe I didn't try using the internet2 server for the mms server before. Thanks so much!!! I removed the proxy and it still works! I received the mms in about 4 seconds. Nothing else has worked and I've tried for hours and hours and almost gave up.
okay, only half working. I can send fast now, but can't receive anymore. It worked once then dead. I'll keep trying, but at least I'm closer.
Here's a more complicated, but maybe more effective method. I figured it out after trying several other methods to lesser and greater extents. This works for me but it may not work for you.
APN 1
Name: T-Mobile
APN: internet2.voicestream.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: internet2.voicestream.com
MMSC: http://216.155.174.84/servlets/mms
MMS proxy: <Not set>
MMS port: <Not set>
MCC: 310
MNC: 260
Authentication Type: <Not set>
APN type: default
Menu-->SAVE
Menu->New APN
APN 2
Name: T-Mobile US-MMS
APN: epc.tmobile.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server:
MMSC: http://216.155.174.84/servlets/mms
MMS proxy:216.155.165.50
MMS port: 8080
MCC: 310
MNC: 260
Authentication Type: <Not set>
APN type: mms
Menu-->SAVE
Wait at least a minute. I'm using Handcent. You should see your connection disappear when you try to send as it switches over to epc.tmobile.com from internet2. I am getting 3-8 second sends at 100kb with similar receive times.
I think the trick is to do this and wait about 2-3 minutes. At first I had problems with the browser. It told me that I needed to upgrade to get internet access. But after about 3 minutes it started working.
let's see. trying again...
picture sent in 8 seconds
received in 5 seconds. 83kb
world of frustration is over for now
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
_____________
MDJ Gingerbread 1.6 NAND
2.15.50
There is an Energy Ti ROM under there somewhere too.
I also used *#*#4636#*#* (call this number) to set my Network settings to WCDMA preferred. I don't think that's what did it though.
thank you thehumble1 you settings helped me find another which works after my mms stopped working on AmeriCanAndroid gingerbread builds. if anyone is having issues I am using this apn
Name: T-Mobile
APN: internet2.voicestream.com
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: internet2.voicestream.com
MMSC: http://216.155.174.84/servlets/mss
MMS Proxy: Not Set
MMS Port: Not Set
MCC: 310
MNC: 260
Authentication Type: None
APN type: default,mms
glad it worked for you. I'm still only getting success about 60% of the time, but it's the best I've had.
btw, if you said thanks, hit the thanks button too. It's a great way to help us know who is here to help each other and who's just looking for handouts.
I have found about 20 different posts that all list different APN settings for T-Mobile US. Does anyone know what they should be for sure? Please only post if you are able to SEND MMS. I seem to be able to receive MMS, but can never send MMS. I have gotten it to work a couple times on some builds but the same settings don't seem to work on other builds.
Posting the settings is great but if you have a backup file from "APN Backup and Restore" that would be even more convenient.
Thanks
I fought with this same problem for a while, trying every setting i found in all the threads. One way i finally found that allowed me to send and recieve was to make 2 APN's, one with the standard epc.tmobile.com and nothing else, and another named t-mobile mms with the following settings:
APN: T-Mobile MMS
Proxy: None
Port: None
Username :none
Password: none
Server: none
MMSC: http://mms.msg.eng.t-mobile.com/mms.wapenc
MMS Proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
I got the idea for using multiple APN's when i looked at my girlfriend's my touch slide's settings. Hope that helps!
Thanks. I'll give that a try and let you know how it goes. I read once that there are different settings for PPP and RMNET. I wonder if that's why I was able to get it to work on some builds and not others.
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
as per another thread!
i use this and it works but the pictures are still fuzzy
WaveyKat said:
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
as per another thread!
i use this and it works but the pictures are still fuzzy
Click to expand...
Click to collapse
this particular mmsc worked for me!
ok
Thanks!!!!!!!
jay-red said:
I fought with this same problem for a while, trying every setting i found in all the threads. One way i finally found that allowed me to send and recieve was to make 2 APN's, one with the standard epc.tmobile.com and nothing else, and another named t-mobile mms with the following settings:
APN: T-Mobile MMS
Proxy: None
Port: None
Username :none
Password: none
Server: none
MMSC: http://mms.msg.eng.t-mobile.com/mms.wapenc
MMS Proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
I got the idea for using multiple APN's when i looked at my girlfriend's my touch slide's settings. Hope that helps!
Click to expand...
Click to collapse
Thanks for these settings that u shared. This was the only APN that worked for my friend to get mms on tmobile prepaid with an AT&T Xperia Play 4g. They only get 2g/Edge, but I feel they even got an increase in speed from the "telekila"APN that was on the phone even if its small increase within 2g. Thanks everyone.
What are the correct apn settings for T-Mobile prepaid? Speedtest.net is reporting my location WAY off and pings are through the roof even though data speeds are just fine.