after months of using my device, qtek s100, after a reinstall of windows (same that i'm installing everytime) when it tells me "tap the screen..." i tap, and ask me for calibrating. I'm calibrating him, and still ask for calibrating, with no end...the problem was manifested when the windows still worked and everywhere i was pressing, it was like i was pressing on Start everytime, even if i was pressing on clock for example. what should I do? pleaseeee
hello mate, why not try to upgrade your OS
hy. i've upgrade it to 1.13 which everytime worked. then i've upgrade it to 2.03 which has the same problem. does exists another OS to upgrade?
Ady_uaic, I also have that problem and FINALY i've figured it out...
above the LCD screen, there's a thin transparent glass screen (touchscreen), which has a small ribon that connects to your phone.
check this link for a picture of it: http://cgi.ebay.com/OEM-Dopod-818-i...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem (*)
The thing is...once, when i was opening my phone, i did a small cut on the ribon by mistake and now the screen behaves like that...I've found that if i gently push that touchscreen to the right, the ribon will sometimes bend a little bit and will make a perfect contact which allows me to keep the phone aligned...unfortunately this is only temporarely since sometimes the ribon moves and of course, the alignment is lost...So, i would advice you to check if the ribon is intact and not broken somewhere...if it is broken, then you know what to do: Buy a new touchscreen and/or an LCD w/ touchscreen included.
Hope this helps...
Regards,
Keeper
(*) although similar, do note that this touchscreen AIN'T for the magician, so don't order this one!
hello..thank you for your quick answer..i will try and i'll let you know
Sound like a hardware problem ... try flushing a new rom, if not , take it to a lab.
open up the device and reconnect the display ribbon wire properly after cleaning with a soft cloth.
the ribbon may disalign after a fall or dismantling the device and certain other factors.this is the only possible fault.if it doesn't workout, you may have to get the lcd changed.
So my Titan has been on the fritz for some time. It started with the front keypad " up " button becoming hard to register. My screen, upon startup goes white, phone is responsive however. So the rom does boot up. this problem was sporadic, until one day powering on an off did not fix the problem. Before the screen stayed white, I lost the ability to open the keypad without the phone's screen freezing. I could slide the keypad maybe a quarter of an inch open, any further an it froze. So, my question is, What could be causing this problem, an, what could be a possible fix? I have already loaded up a rom on it hoping this would remedy the problem, no joy. It is a sprint titan, flashed to cricket, currently loaded is dcd 3.3.4 with a hardspl I believe. Open to any an all fix's. I will try an post back. Would like to get it fixed so I can sell it.thank you all for your time.
Time for a new phone sounds like a hardware failure when roms don't fix the problem
It sounds like it is your ribbon cable... you can get them online, and they aren;t overly expensive if yo ucan replace it yourself...
ok, the ribbon cable. I'm somewhat handy with things. does anyone know of a guide for opening up this phone?
there are a couple of good ones on youtube
but you will need a small torx and small philips screw drivers. Like ones that work on glasses
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Hi all,
My trusty blackstone has begin letting me down and I don't know if flashing a new rom will help, or if it is something physical that is breaking / broken. I'm using the Stonehenge ROM with CHT and everything has been fine for months.
Recently the touch screen allignment just seems to 'wander' sometimes just a little, other times quite a lot (so much that using the fake hardware buttons at the bottom of the phone, brings up the start menu). This means that intermittently I cannot answer calls, and typing a message on the SIP is an absolute nightmare!
The start menu icons do not seem to be as affected as the home screen and CHT, and I can quite easily get to the phone settings and recalibrate the screen - this will help for a short while but the alignment drifts again.
Restarting the phone has a temporary positive effect but it doesn't last.
Anyone else experienced this?
I have exactly the same problem.
Dissembled the whole device, blown some hot air but didn't help. Seems it's a HW fault. But I have a doubt whether the problem is in digitizer or in control board.
It's definitely one of the more frustrating problems that I've ever had with the phone.
I might try flash a new ROM then give up if that doesn't work. At least I won't be tempted to disassemble as it has already been tried, tbh I'd have just tried the tin of compressed air too, I don't trust my soldering skills for tiny electronics.
It is getting progressively worse, the touch area of the screen has slipped so low now that I can't use half the screen.
Screen Alignment Fix
Have a look on this one, maybe this will help you...http://forum.xda-developers.com/showthread.php?t=538113
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
AngelDeath said:
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
Click to expand...
Click to collapse
Its definetly an LCD issue, anyways not a major issue, as long as you can dismantle the phone and clear up the area btw the LCD and Keypad, i guess it should be back to normal
When you say Clear up the area, mind clarifying what that means? I can dismantle the phone, at this point it would probably be cheaper then sending for repair especially that its most likely out of warranty anyway.
I'm pretty much under the impression I am going to need to buy a lcd/digitizer combo to fix this. Unless I dont have to, cause like I said there is no bleeding and the phone works fine (minus the touchscreen issue caused by the end key) I can navigate thru the phone using droid explorers Screencast.
well what i intened to say was that there could be particles of dust or debris that is causing the LCD ribbon to come out a little, Coz i had a similar issue with "Dead touchscreen workin hard press end key " , later when i dismantled the phone and put it back again my screen looked exactly like yours, all i had to do was open it again and fix the LCD flex to the Main board properly thats all.
on a side note:
Well the touchscreen issue eventualy died all together, and i now have a replaced LCD from HTC and the screen is dull