Bluetooth headset problem - Galaxy Tab General

Hello,
Not sure if this is a common problem, I did a search but didn't find anything. When I connect my headset (Blueant Q2) to the tab, all is well. If i walk away till it disconnects and walk back to the phone it won't reconnect. Even trying to force the headset to reconnect doesn't seem to work (ie turning off and on the headset). The headset just doesn't seem to be able to detect the phone. The thing that seem to work is turn off/on the headset and then turn bluetooth on the tab off/on again. Not sure if this is normal.
Sent from my GT-P1000 using XDA App

Isn't really normal. Both my Blueant T1 & Samsung wep-570 disconnect within 10 meters but autoreconnect into range.
Sent from my GT-P1000 using XDA App

same problem here, please let me know if you now how to fix it.

Here is the same..
Also, i'm not able to give voice command such as "call mom mobile 1" as I did and I still do with milestone or iphone...
Any fix/update also for this one?

From my experience, deleting all the profiles from both the headset and the device and then reconnecting them helps. For blueant, I believe to purge all previous paired devices you need to hold the volume up/down buttons as well as the answer/power button for about 3 seconds. Turn it off then back into pairing mode and it might help. Give it a try...

Related

Bluetooth disconnecting during call

Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...
Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.
so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..
Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.
Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.
GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.
Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.

Anyone else having issues with Bluetooth not connecting to headsets?

I am finding that sometimes my DI will not connect to a headset it is already paired with even if the device. For example, my home phone has Bluetooth built into it so that my calling my cell phone makes my home phone ring. However I generally have to manually go into Settings -> Wireless & Network -> Bluetooth settings and then manually connect to that device.
Sometimes that doesn't even work and even when I click "Scan for devices" nothing happens. I have to power off my phone and then power it back on for it to work.
It is a big pain because I will be in my car and put on my Bluetooth headset and it won't work automatically. Not fun to have to restart the phone just to get Bluetooth to work.
Any thoughts?
I've used BT headsets since the Moto V710 came to VZW.
Some phones are better than others at connecting, and the Incredible seems slightly better than the Moto Droid - or maybe about the same.
Examples (and I use a few different headsets):
I answer the phone normally and decide to switch to a headset. I power on my headset and stick it on my ear. After a few seconds I hear the "connecting" noises thru the headset and the audio switches over from phone to the headset automatically.
This is what happens most of the time. Now sometimes I do this process but nothing happens. So I then press (usually long-press, depending on the particular headset) the button on the headset to "make" it connect. Sometimes, though not very often, even this doesn't work (after trying several times) - in that case I power off the headset (not the phone!) and power it back on again and repeat.
If I turn on the headset before making a call, I have close to 100% success rate for my headset connecting normally.
This is about par for the course as far as Bluetooth goes. Some phones are better than others - and the top of the line dumb phones I've used seemed to connect a little more consistently than the various smartphones I've used.
As to your issues, if your home phone BT thing doesn't have a button to help "force" the connection, then maybe just try powering off/on BT on your phone instead of powering the phone off.
Yes i have the same problems. Not unique to the Incredible though. Just about every smartphone I've had does the same BS.
The iPhone is the only phone that worked greater than 90% of the time. Wish the Incredible was better.
Thanks for your input guys.
Coming from experiences as a long time Windows Mobile user, I never had any problems with this. I think with Windows Mobile it automatically connected to whatever Bluetooth device it had already been paired with something like 98% of the time. With this phone it is honestly 50% at the best.
I want to clarify here though that it is not just it being flakey. There is definitely something that happens with the software on the phone. How I know this is that when I have this happen and it is not connecting to any Bluetooth devices, I will go into Settings and when I press the scan for devices button, nothing at all happens. Normally it would appear to be searching.
Something is definitely happening (or not happening) and I haven't narrowed it down to figure out what it is.
I use BT headset in my truck all the time. I turn on BT before I get into the truck and turn on the headset after I am in the truck. Takes a few moments to connect.
Works every time. Only real issue is lack of hands free dialing, but if I know I will be calling someone while driving, I pre-dial the number and can with a long press on the headset redial after I am driving.
Answer the phone is not an issue.
I have the same problem.
Xlink BT gateway at home, Moto H790 headset for use in the car.
My other phones auto connect (or I get a prompt on the phone asking if I want to connect based on BT Security settings on the phone).
My HTC Incredible will sometimes auto connect, but if I disconnect the H790, it doesn't auto connect to the Xlink. If I got into Settings on the INC, and select the Xlink to connect to, the INC will tell me it failed. Same if I try to reconnect the H790.
I have to power the INC off/on.
This is unlike my other phones and Blackberries. (NOTE: I didn't try my droid with the Xlink, but it seemed to connect/disconnect/reconnect fine with my H790, unlike my INC which doesn't).
KidJoe said:
I have the same problem.
Xlink BT gateway at home, Moto H790 headset for use in the car.
My other phones auto connect (or I get a prompt on the phone asking if I want to connect based on BT Security settings on the phone).
My HTC Incredible will sometimes auto connect, but if I disconnect the H790, it doesn't auto connect to the Xlink. If I got into Settings on the INC, and select the Xlink to connect to, the INC will tell me it failed. Same if I try to reconnect the H790.
I have to power the INC off/on.
This is unlike my other phones and Blackberries. (NOTE: I didn't try my droid with the Xlink, but it seemed to connect/disconnect/reconnect fine with my H790, unlike my INC which doesn't).
Click to expand...
Click to collapse
Yep, KidJoe, that does sound exactly the same. Glad to see I am not crazy. If you find a solution, post it to this thread please. I'll do the same.
Same problem here.....The MyTouch I had was 100% reliable when picking up the BT when in and out of range. I think I want a MyTouch with a 4.25 inch screen.

Pairing Jawbone 2 bluetooth

Has anyone been able to pair a Jawbone 2 with the EVO? I haven't had any luck.
My EVO was able to pair with my Dell AdamoXPS laptop.
Thanks!
-------------------------------------
Sent via the XDA Tapatalk App
ive been having the same problems my phone won't find my jawbone anyone had any luck?
Pairing to Jawbone 2
Hold button on back of headset & turn on, when light flashes red - white tell phone find new device. Done
uh no i have the regular jawbone you press the middle button and hold it to turn it on. It should connect automatically if you have paired before. Since the phone is new i haven't but the problem is the phone won't find it when pressing scan for devices. I've done it with my g1 many times without a problem but the evo seems not to pick it up.
my jawbone prime pairs just fine
-------------------------------------
Sent via the XDA Tapatalk App
I have a Jawbone 2 and paired mine up with the EVO the first time, no problems.
Make sure your bluetooth is in pairing mode. I know for the Jawbone 2, to put into pairing mode, turn the bluetooth OFF. The both the volume and power buttons at the same time. The light should blink red, white, red, white, etc. This means you are in pairing mode.
While the bluetooth is in pairing mode, on your phone go to Settings > Wireless & Networks > Bluetooth settings > Scan for devices
You guys are absolutely right since post #3 i didn't understand it at first. I never had to do that to my jawbone with my g1. As soon as the jawbone turned on it would pair ask for pass code '0000' and done. For some reason this step is required with the evo, it's the only way it actually found it while scanning.
I had no issues. See post #3.
GReddySetGO said:
I have a Jawbone 2 and paired mine up with the EVO the first time, no problems.
Make sure your bluetooth is in pairing mode. I know for the Jawbone 2, to put into pairing mode, turn the bluetooth OFF. The both the volume and power buttons at the same time. The light should blink red, white, red, white, etc. This means you are in pairing mode.
While the bluetooth is in pairing mode, on your phone go to Settings > Wireless & Networks > Bluetooth settings > Scan for devices
Click to expand...
Click to collapse
I followed these instructions to a T and it still won't find it. Hmmm....I'm going to have to try another bluetooth. Weird....it detected my laptop's just fine.

[Q] Bluetooth Devices Disappear?

I have been patrolling the forums trying to find a solution (or at least a thread similar) to my problem. I made the move from the G1 to the Vibrant in Aug. I was spoiled by it so it feels. I've grown quite custom to my Bluetooth devices being remembered by my phone, and not having re-sync them everytime i want to use them. I'm wondering if there is a fix for this, or is this apart of the Vibrant framework and i just have to get over it? Has anyone else been experiancing this?
Help
Speak now or forever hold your piece. This is a huge nerd farm and im sure we can all put our heads together.
Are you talking about pairing or connecting the device? I only have one bluetooth device with my phone, and the phone has no problem staying paired to it. I do have to reconnect it when I turn on bluetooth, but that's all.
To clarify:
I turn on bluetooth.
My headset is shown on the devices list.
I press it once and it connects.
Device is ready to use.
Once, the device didn't show in the list while BT was off, but when I enabled BT the device was displayed.
Ilmoran said:
Are you talking about pairing or connecting the device? I only have one bluetooth device with my phone, and the phone has no problem staying paired to it. I do have to reconnect it when I turn on bluetooth, but that's all.
To clarify:
I turn on bluetooth.
My headset is shown on the devices list.
I press it once and it connects.
Device is ready to use.
Once, the device didn't show in the list while BT was off, but when I enabled BT the device was displayed.
Click to expand...
Click to collapse
What i mean is, I normally have more than one BT device connected. More specifically my BT headset, and my car BT stereo. I used to be able to have both devices remembered in my device list. But now my BT Headset is the only remembered device (and sometimes, it too will disappear. Now i constantly have to re-sync my stereo. However when a re-sync is needed, i don't have to pair the devices.
On my G1, this was not an issue. So any ideas?
I have my laptop, headset, and stereo headphones paired to my phone. Haven't had any problems, they all remember fine. However, I sometimes have to disable and re-enable Bluetooth because I have a custom name for my device, and sometimes when the phone boots it forgets that it has that name and goes back to calling itself SGH-T959. I don't know if this is related... just throwing it out there.
chui101 said:
I have my laptop, headset, and stereo headphones paired to my phone. Haven't had any problems, they all remember fine. However, I sometimes have to disable and re-enable Bluetooth because I have a custom name for my device, and sometimes when the phone boots it forgets that it has that name and goes back to calling itself SGH-T959. I don't know if this is related... just throwing it out there.
Click to expand...
Click to collapse
This does help a little. Perhaps because I am still stock, I am having this issue. What ROM are you using?
McBang2023 said:
This does help a little. Perhaps because I am still stock, I am having this issue. What ROM are you using?
Click to expand...
Click to collapse
I've had the problem on stock JFD, JI6, and on Bionix with JAC Voodoo kernel.
I'm having the same problem with my car's BT system. I thought it was my car till I read ur post. What happens with me, is that the car (which should connect automatically) will say that there isn't a phone available. I will then open Bluetooth settings (on my phone) and see that there are no devices listed. After cycling the BT off then on, my car will show up again, and will connect......strange
Sent from my SGH-T959 using XDA App
lestat210 said:
I'm having the same problem with my car's BT system. I thought it was my car till I read ur post. What happens with me, is that the car (which should connect automatically) will say that there isn't a phone available. I will then open Bluetooth settings (on my phone) and see that there are no devices listed. After cycling the BT off then on, my car will show up again, and will connect......strange
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Exactly my issue. So seeing how i am not alone in the issue, does anyone know a fix or how to resolve issue? It's not a BIG problem, bnut it is annoying to have to re-sync everytime i get in my car, (or send files from my iMac to my phone).
+1 for the vibrant forgetting my bluetooth devices. I'll open my headset and I hear it say, "Ready to Pair". It's not a big deal, really-- all I have to do is turn bluetooth on, then turn it back off and all my devices repopulate. But it is an annoyance.
thecapoots said:
+1 for the vibrant forgetting my bluetooth devices. I'll open my headset and I hear it say, "Ready to Pair". It's not a big deal, really-- all I have to do is turn bluetooth on, then turn it back off and all my devices repopulate. But it is an annoyance.
Click to expand...
Click to collapse
Ive tried that a few times, but it still yields no results for me. Any ideas.
so do we have any more suggestions from the nerd farm on how to resolve the issue?

[Q] Bluetooth Pairing issues

My issue today is that my bluetooth will not pair properly and remember its configurations. My initial pairing on my phone with my car's flexsmart X3 works perfect, however when I turn off my bluetooth on the phone or turn off my car and turn it back on the phone will still see the flexsmart and it will say it is paired but I get no sound. Upon further investigating I find that in the options setting that neither the call nor music tick box is checked. If I try to tick them it will think for a few seconds and then gray out and do nothing again.
I never had a problem with my note 2 or my temp replacement evo 3d remembering these settings. All I would do with those phones was pair it once and then any time I hopped in the car I would just turn onm,y phone's bluetooth and go. Now with my note 4 I have to unpair and repair the devices each and every time which is a huge pain. Once I have initially paired the bluetooth though it will stay connected without any interruptions. Also pairing for me is really fast and only takes a minute or so. My problem is that again instead of my phone remembering the current device settings that it is paired with, it will forget to associate it with calls and data after I turn the bluetooth off and then later back on even though the phone will still remember it is paired with the car bluetooth.
I have read a little bit that this is due to samsung note 4 using a newer bluetooth standard than its predecessors. Is there anyway to circumvent this issue by maybe rolling back the bluetooth drivers or something? I even thought about creating a tasker profile to help with this but still I would have to physically press the search button on the flexsmart eachtime.
First world problems I know but it gets a tad annoying having to unpair and repair my phone each and everytime I hop in my car to go somewhere if I want to listen to my music. Any and all suggestions would be great.
Also right now I am on a sprint network rooted stock 5.0.1 if that helps any

Categories

Resources