Database Users

Worst HD2 expeience.

Very strange problem.not able to flash any radio of rom after flashing tmobile official RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_Signed_15.42.50.09U_2.14.50.04_2_Ship rom.
every radio of rom upgrading process gets stuck at 0%.
Also my screen becomes dead freeze after the official rom boots up.

HSPL
Did you flash from your sd card or usb, because if its from sd card, hspl will be written over?
My guess is to download hspl3, choose the 2.08 hspl option, and you will be fine.
Judging from your post count you probably know that already, lol
Just trying to help.

rappinlarry said:
Did you flash from your sd card or usb, because if its from sd card, hspl will be written over?
My guess is to download hspl3, choose the 2.08 hspl option, and you will be fine.
Judging from your post count you probably know that already, lol
Just trying to help.
Click to expand...
Click to collapse
luckily after flashing official Tmobile Rom,i patched my HSPL back to 2.08HSPL.and now i have installed NRGZ 21916 (Energy style(close to reference without cookie's home tab) ROM.but now im not able to use the phone as the touch screen is not working permanently.do u suspect a hardware problem here?
i am from India and my Tmobile Hd2 din come with warranty as we dont have Tmobile here.i had a word with the HTC Service center and they are saying that the device has a screen sensor problem and a replacement will cost me Rs7,000 INR.
i do not want to bare this cost.please all members,i request you to provide me a solution to this ridiculous problem.
Should i go ahead with Task 29? would it be safe.since i am able to upgrade roms successfully,i really dont find it a need to.but my touch screen is not working and the only way to interact with my phone is to connect it via mobile device center and then use MyMobiler.
Any kind of help would be highly appreciated.

Based on the ability to flash a rom I would look to restore it factory radio and rom. Then start over. I know this is a pain but it migh solve the issue. Maybe something is hosed in Ram during flash.
I had Moto Droid that the screen quit working after applying a CM rom. I had to flash over my original SBF and then re-root and apply a new rom. May have been over kill but wanted to be sure. Also had the old HTC Titan(XV6800 on Verizon) do the no touch screen thing on a rom flash.
In the end it doesnt hurt to try.

Big Dawg 23 said:
Based on the ability to flash a rom I would look to restore it factory radio and rom. Then start over. I know this is a pain but it migh solve the issue. Maybe something is hosed in Ram during flash.
I had Moto Droid that the screen quit working after applying a CM rom. I had to flash over my original SBF and then re-root and apply a new rom. May have been over kill but wanted to be sure. Also had the old HTC Titan(XV6800 on Verizon) do the no touch screen thing on a rom flash.
In the end it doesnt hurt to try.
Click to expand...
Click to collapse
yah..i did that too..but in vain..then the last thing iv tried yesterday was Task 29.that totally ruined my phone.now it just boots up to the NRGZ boot screen WITHOUT showing me the HSPL details and now im not even able to falsh a ROM/Radio not hard reset.
Tmobile is responsible to dispatch a ruined lot of HD2s' to the market.

Finally managed to do a successful Task 29 and flashed RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_Signed_15.42.50.09U_2.14.50.04_2_Ship update.
i did a hard reset too after flashing the Rom.
here are the Radio details :
Code:
R 2.14.50.04
G 15.42.50.09U
D 3.14.04666 8G
here are the details shown in boot loader mode :
PB81120 SS-B3
SPL 2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
But the touch screen screen still not working
Now what to do..???

karan999 said:
Finally managed to do a successful Task 29 and flashed RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_Signed_15.42.50.09U_2.14.50.04_2_Ship update.
i did a hard reset too after flashing the Rom.
here are the Radio details :
Code:
R 2.14.50.04
G 15.42.50.09U
D 3.14.04666 8G
here are the details shown in boot loader mode :
But the touch screen screen still not working
Now what to do..???
Click to expand...
Click to collapse
seems like hardware- you are having the same screen problem with different roms, correct? similar situation happened to me where the keys worked, but the screen stopped working (strangely, immediately after installing android.) tmo replaced the device. just my $.02.

As long as you have HardSPL on your device then I would sugest trying to flash some different Roms and see if any of them get rid of your TouchScreen problem.
Try Duttys Rom *HERE* first as it is a very stable Rom and is compatable with TMOUS HD2's. Flash via activesync, let it boot into the setup screen then take out the battery and hard reset.
Mark.

mskip said:
As long as you have HardSPL on your device then I would sugest trying to flash some different Roms and see if any of them get rid of your TouchScreen problem.
Try Duttys Rom *HERE* first as it is a very stable Rom and is compatable with TMOUS HD2's. Flash via activesync, let it boot into the setup screen then take out the battery and hard reset.
Mark.
Click to expand...
Click to collapse
i try that and respond back..thanks..downloading..

Dutty's roms are in zipx format.im not able tro extract it even after installing winzip 11.please help.

some roms come zipped with 7zip software...that is different you have to google 7zip and install that to extract..also try any chuckrom those work great and also tmobile compatible

karan999 said:
Dutty's roms are in zipx format.im not able tro extract it even after installing winzip 11.please help.
Click to expand...
Click to collapse
Just google 7zip and use it to extract the files needed to flash its a free program.
Mark.
Sent from my HD2 using XDA App

UPDATE :
i have flashed Dutty's 21961 rom too.still the screen is not working.

karan999 said:
UPDATE :
i have flashed Dutty's 21961 rom too.still the screen is not working.
Click to expand...
Click to collapse
What SPL do you have on your phone?
The only other thing I can sugest is to try installing a different HardSPL. If that doesnt fix the TouchScreen problem then im afraid your phone has some kind of HardWare problem.
Have you tried the original stock rom that would have come with the phone?
Mark.

mskip said:
What SPL do you have on your phone?
The only other thing I can sugest is to try installing a different HardSPL. If that doesnt fix the TouchScreen problem then im afraid your phone has some kind of HardWare problem.
Have you tried the original stock rom that would have come with the phone?
Mark.
Click to expand...
Click to collapse
Hi Mark..thanks alot for your constant help.my uncle's HD2 had the Screen Digitizer problem.the Digitizer layer sets above the screen.So replacing just the digitizer costs 1500 INR and the entire screen costs ~6500 INR.(prices as reported by uncle after consulting the concerned person repairing the phone).
It was a Hardware problem finally detected !!!
id request u not to close this thread by next week.If the problem gets permanently fixed,i'll inform you here and then you may close this thread.
Regards,
Karan.

karan999 said:
Hi Mark..thanks alot for your constant help.my uncle's HD2 had the Screen Digitizer problem.the Digitizer layer sets above the screen.So replacing just the digitizer costs 1500 INR and the entire screen costs ~6500 INR.(prices as reported by uncle after consulting the concerned person repairing the phone).
It was a Hardware problem finally detected !!!
id request u not to close this thread by next week.If the problem gets permanently fixed,i'll inform you here and then you may close this thread.
Regards,
Karan.
Click to expand...
Click to collapse
Let me know if the phone gets fixed
Mark.

mskip said:
Let me know if the phone gets fixed
Mark.
Click to expand...
Click to collapse
My uncle had recently been to Florida.he had sent the phone from there to the HTC Service center and got the screen fixed !!!!!!!!! he said that he just had to pay some shipping charges.
Thanks Mark and other Members here for their continuous help.
Regards,
Karan.

karan, glad u could get the issue fixed !!!
its always good to have contacts in the US especially if you have a TMOUS HD2 and live in india like me to LOL, BTW my sis lives in NJ!!
Luckily my HD2 has survived exceptionally well till date
mally

[HELP NEEDED] Stuck in white bootscreen with no connection

Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob

Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.

I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.

For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.

@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!

Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??

Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?

Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too

CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!

tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.

Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.

Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?

kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?

Then your best bet is to flash with a goldcard

Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?

Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?

No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304

Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck

sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....

That app should be Task 29.

[Q] Is my HD2 dead ? :((

Hi guys, i dont know what happened but since i have put the android NAND on my phone it stops responding. in MAGLR i kept getting FATAL1E error. So fine i decided i will come back to windows 6.5.. i have installed 3.66 officail one and same things keep happening. It will sometimes boot sometimes it wont. It will boot but it wil hard reset instantly. Exacly the same as it was on android. I think it might be broken physicly. I dunno RAM, ROM, CPU ? Any way of checking it ? I dont want to say goodbye to my Leo
Thanks for help

viperek027 said:
Hi guys, i dont know what happened but since i have put the android NAND on my phone it stops responding. in MAGLR i kept getting FATAL1E error. So fine i decided i will come back to windows 6.5.. i have installed 3.66 officail one and same things keep happening. It will sometimes boot sometimes it wont. It will boot but it wil hard reset instantly. Exacly the same as it was on android. I think it might be broken physicly. I dunno RAM, ROM, CPU ? Any way of checking it ? I dont want to say goodbye to my Leo
Thanks for help
Click to expand...
Click to collapse
Either a hardware issue or something in NAND causing it.
Here's what I'd do.
1) Flash HSPL if you went back to stock SPL
2) Flash Task29
3) reflash MAGLDR or Stock ROM.
The key here was task29 which will completely erase your NAND so there is nothing left over to mess you up. If it still gives you issues after this I would think hardware.

orangekid said:
Either a hardware issue or something in NAND causing it.
Here's what I'd do.
1) Flash HSPL if you went back to stock SPL
2) Flash Task29
3) reflash MAGLDR or Stock ROM.
The key here was task29 which will completely erase your NAND so there is nothing left over to mess you up. If it still gives you issues after this I would think hardware.
Click to expand...
Click to collapse
Thanks for quick replay. I remmember when i was first playing about with android i thinks something messed up the HSPL. The current one i got is SPL-2.08.HSPL 8G XE. Dont know if its the one i should have. ALso when i flash winmo i did it over the cable not straight from the SD card. So im not sure if it has changed SPL. I did use Task29

viperek027 said:
Thanks for quick replay. I remmember when i was first playing about with android i thinks something messed up the HSPL. The current one i got is SPL-2.08.HSPL 8G XE. Dont know if its the one i should have. ALso when i flash winmo i did it over the cable not straight from the SD card. So im not sure if it has changed SPL. I did use Task29
Click to expand...
Click to collapse
Download the HD2 Tools from the sticky topic in the Android NAND section and use it to do a clean install.
Bootloader>Task29>Bootloader>HSPL>Bootloader>MAGLDR

TheATHEiST said:
Download the HD2 Tools from the sticky topic in the Android NAND section and use it to do a clean install.
Bootloader>Task29>Bootloader>HSPL>Bootloader>MAGLDR
Click to expand...
Click to collapse
Yeah but you may not be able to flash task29 without HSPL installed first since task29 is not an official ROM, so you may have to flash HSPL first then task29 then magldr.

hmm this is very strange. Suprisingly after loading the newest ROM and SPL 3.. something with it from the SD card all the problems dissapear. But When i start playing with Hard SPL and MAGLRD it just keeps freezing and kind of overheating. Still keep getting E1 FATAL ERROR. Dunno what its for but my guess is that parts of my memory are broken and it causes data to corrupt. Anyone had situation like that ? Guess i will be stuck on Winmo

viperek027 said:
hmm this is very strange. Suprisingly after loading the newest ROM and SPL 3.. something with it from the SD card all the problems dissapear. But When i start playing with Hard SPL and MAGLRD it just keeps freezing and kind of overheating. Still keep getting E1 FATAL ERROR. Dunno what its for but my guess is that parts of my memory are broken and it causes data to corrupt. Anyone had situation like that ? Guess i will be stuck on Winmo
Click to expand...
Click to collapse
Have you done the task29 like I suggested?

orangekid said:
Have you done the task29 like I suggested?
Click to expand...
Click to collapse
yes i have

just if anyone is interested i have solved the problem. For some reason i think the HSPL did not want to work propley. So i have installed HSPL 4 on my 3.03 SPL and then installed clK. After that i have managed to install Clockwork and then NAND clK Typhoon one. Now everything boots up and works like a charm. No issues with overheating and freezing. Thanks to all involved

Well done VipereK027, and thanks for updating us with your solution.

Updated ROM & Radio Now Runs very sow

I bought my HD2 after having the Desire and I got hold of the network unlock key so was free to use any network. As i'm on Three I updated with a Generic ROM and all was fine for around a week and then I got the White Screen but a Soft Reset got me back running.
Now my ROM will load but the phone is so slow I dont know how to get it back to speed. Ive put the stock T Mobile ROM back on but this does not help.
What Can I do? I think after reading that it may be a radio issue but im not that clued up here so thought i'd ask at XDA whichg ive been using for years.
If I could send it to someone to get sorted out that would be easier and i'd cover the costs,m postage and the drink for dong it.
Any advice or takers please?
Regards
Jay

jayknight71 said:
I bought my HD2 after having the Desire and I got hold of the network unlock key so was free to use any network. As i'm on Three I updated with a Generic ROM and all was fine for around a week and then I got the White Screen but a Soft Reset got me back running.
Now my ROM will load but the phone is so slow I dont know how to get it back to speed. Ive put the stock T Mobile ROM back on but this does not help.
What Can I do? I think after reading that it may be a radio issue but im not that clued up here so thought i'd ask at XDA whichg ive been using for years.
If I could send it to someone to get sorted out that would be easier and i'd cover the costs,m postage and the drink for dong it.
Any advice or takers please?
Regards
Jay
Click to expand...
Click to collapse
The unlock key applies to the phone, not the ROM. So I would flash a new ROM. You don't mention if yours is US or Euro model, it makes a difference when flashing.

could the problem be 3.14 ROM on non 3.03 spl?
enter bootloader, what does it say on the spl line?
what version ROM is running?

samsamuel said:
could the problem be 3.14 ROM on non 3.03 spl?
enter bootloader, what does it say on the spl line?
what version ROM is running?
Click to expand...
Click to collapse
This is info on the boot screen
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPDL 0x30
Wheb
R 2 08. 50. 08--2
G 15.34.50.07U
D 3energy 8GU
My phone is a euro model and ive just flashed with an Engergy Leo21916.sense25.cookie.2.0.GTX.June01
Not sure what the radio is as included with the ROM
Please help. Ive tried all types of ROMS etc and im sure its just an issue of the wrong ROM & Radio.
Will install the ROM but will just loop on first install even if i reset throughout
Liuke I said before if I could send to someone to fix it I would be most grateful.
The stock rom would be fine but would prefer the unbranded if posssible
Many thanks
Jay Kay.

jayknight71 said:
This is info on the boot screen
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPDL 0x30
Wheb
R 2 08. 50. 08--2
G 15.34.50.07U
D 3energy 8GU
My phone is a euro model and ive just flashed with an Engergy Leo21916.sense25.cookie.2.0.GTX.June01
Not sure what the radio is as included with the ROM
Please help. Ive tried all types of ROMS etc and im sure its just an issue of the wrong ROM & Radio.
Will install the ROM but will just loop on first install even if i reset throughout
Liuke I said before if I could send to someone to fix it I would be most grateful.
The stock rom would be fine but would prefer the unbranded if posssible
Many thanks
Jay Kay.
Click to expand...
Click to collapse
NRG ROMS don't contain radios. You need to visit the first page, where they recommend radios.
I would suggest downloading the official ROM for your HD2 serial number from the HTC website. Then flash that from the SD card. This will put everything, including the radio, back on the device. Then you can go from there.

Many thanks for all the answers but their not helping unfortunately. I installed ther following a Laurentius26 ROM with the following radio 2.12.5.02_2 amd finally the phone booted up after a few hours and I could slowly make my way round the phone. To press the window key would take atleast 30 seconds top bring a response. I dont know what Is causing this and it seems like the wrong ROM & Radio is on as the phone used to fly on tjhe stock ROM.
Ive tried to reinstall the Tmobile ROM but it's just the same either way and any other ROM I try does the same.4
Is there anyway of cleaning off everything from the phone and starting again from scratch as it seems definantly that there is a conflict somewhere with the software.
I opened sys info on the phone when it was working and copied down the following just inase it helps.
OS Version 5.2.23148(23418.5.11)
Manilla Version 2.5.20212114.0
ROM Version 2.05 WWE
ROM Date 06/06/11
RADIO 2.12.5.02_2
Protocol Version 15.40.50.07U_2.12.5
Please HELP! Someone out there as i'm just about stuck and i've been playing with Smartphones since the first launch of the Orange Smartphone 10 years ago.
Many thanks in advance
Jay Kau

flash task29 THEN flash another custom ROM, this will ensure any leftover **** gets erased, you might have something in NAND carrying over from ROM to ROM, none of the current radios will slow your ROM down like you're describing.
It's either this or hardware.

also try the above with your sd card and sim removed, its not unknown for a faulty card to play havoc with performance.

I tried task 28 and it never let me press the volume down at 99% so dont know if worked. Still running slow but it is running.
Wouldnt of thought was a HW issue as it was working fine last week. If I need to return to HTC where would I do that in the UK after installing standard T Mobile ROM?
Many thanks and any further help going on Flash 28 and how to do it successfully?
Regards
Jay

sorry task 29 LOL

I attempted Task 29 but after my device went straight into loading a ROM. I thought that Task 29 removed all ROMS. Info etc so you had to reinstall. What am I doing wrong as I followed the instructions to the letter from one of the posts on this excellent site.
Am getting really annoyed now. Is there someone who could do this for me if i send and pay for return postage and a drink please?
Any further info and will try again tonight one more time
Many thanks
Jay

jayknight71 said:
I attempted Task 29 but after my device went straight into loading a ROM. I thought that Task 29 removed all ROMS. Info etc so you had to reinstall. What am I doing wrong as I followed the instructions to the letter from one of the posts on this excellent site.
Am getting really annoyed now. Is there someone who could do this for me if i send and pay for return postage and a drink please?
Any further info and will try again tonight one more time
Many thanks
Jay
Click to expand...
Click to collapse
I know that this may sound strange, but try formatting your SD card. When my phone starts behaving badly, fully formatting the SD solved the problem. Checking it for system file errors usually gives the same results, but doing a full format using the SD card formatter at first gives better results.

you probably have a ROM loaded in your SD card.
if your SD card root has a file called LEOIMG.NBH then it will try to flash it immediately on booting the phone, it's part of the SPL instructions. Delete or rename that file or cancel the flash.

orangekid said:
you probably have a ROM loaded in your SD card.
if your SD card root has a file called LEOIMG.NBH then it will try to flash it immediately on booting the phone, it's part of the SPL instructions. Delete or rename that file or cancel the flash.
Click to expand...
Click to collapse
I you mean me, no I don't flash through SD. but that's a good advice as well.
when the SD has severe System file errors, I noticed that my phone ran extremely slow. correcting those errors made my phone return to it's snappy self.

[Q] White Screen of Death [HELP]

I've been searching for over 20hours around the internet for any solution to the so dreadful White Screen of Death in HD2.
This is due to a Radio Rom incopatible with the device. May be called Radio Brick! Lol
Well, it's truly desperating, as no method tried works!
The phone as soon as it's turned on just shows a white screen, no letters, no nothing.
Happened when I - dumbly - flashed a incompatible radio rom...
It has happened to a lot of other good people, but no solutions yet arrived to the internet!!!
In my case, I have hspl 2.08, and can perfectly access to bootloader, but flashing anything through SD does NOT work.
WHAT I'VE TRIED:
-flashing stock rom from HTC site, but when it comes to the radio part... UPDATE FAILED!
-tried a method here in XDA that solved a case like this but nothing... when it comes to flashing the radio, it always fails
-tried downgrading HSPL to SPL or to another version of HSPL.. curiously, the process says it was sucessfull but it changes nothing.. when i go to bootloader again the version is the same, no matter what kind of version I select...weird!
-nothing flashed through RUU works because comunication fails after 5min at 0%
-task 29 - does nothing
-changing rom/radios - always gives an error in radio update
I'm really, really, REALLY desperate, and I believe i'm not the only one in this situation!
Does someone have a brilliant idea on this?
I got it working again a couple of times but then it starts freezing after 10 hours and then i get again the whitescreen..
Now its stuck at bootloader i can't get in magldrboatloader does some1 known how i get into magldr because than i can flash another rom because in boatloader i can't flash

Hello,
I also have same problem I also cannot find a solution, Hope somebody can help us.

try j-tagging your devices !!
also it may be a hardware issue !!
good luck !!

Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.

Brain in a Nutshell said:
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Click to expand...
Click to collapse
Can you send some tutorials. Because i dont know were to start and how..

I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]

Slagers said:
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Click to expand...
Click to collapse
you'll have to try flashing your device again and again !?
but i think j tagging is the best option for this problem !! !!
you can go to the original htc store if you have not flashed hspl !!
(flashing hspl voids warranty !) !! also try to stock spl to 1.42.0000 by using hspl2 !!! http://forum.xda-developers.com/showthread.php?t=611433
if the bootloader screen (the three color screen) show 1.42.0000 spl then u can show it to the official htc stores !!
else
contact a local repair shop and try to jtag !!
may help !!
good luck !! !

So there is no fix i can do at home like flashing a specific rom or something else?

if the bootloader screen (the three color screen) show 1.42.0000 spl
Click to expand...
Click to collapse
Or 1.66.0000 or 3.03.0000

The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.

SPL-2.08. HSPL
I can flash it back to the normal rom from windows mobile. But i want a android version maybe some1 know a good rom and radio thats stays good?

nemuro said:
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
Click to expand...
Click to collapse
What kernel version you use now? and what rom and radio? So i can do the same things you did.
Can you put the link were you downloaded the kernel and rom and radio please. Thanks in advance nemuro!

You have all information in his signature.
Radio 2.12.50.02.2
ROM Redux2
Kernel Tytung (Redux2 have Tytung 12.4 by default)

how about hardware reset with pressing 3 keys at the same time?

Let me explain whats happing me all the time:
First my phone freezed up all the time and after a couple of weeks I got the [wsod] I can boot into bootloader (3 color screen) there I can flash it back to the original stock (WiMo6.5)
But I want android for my whatsapp and I like android. So I put maglder 1.13 on my phone. Then I tried android NAND flashing this worked but afther 10 hours my phone is off and I got the [wsod] again. I flashed my radio first to 2.15 but didnt help I tried this 2 times.
Yesterday I flashed my hd2 I followed a guide for android sd flashing I put the radio 2.12 on my phone and a old rom. I flashed it with haregt.exe it worked for 10 hours again then boom [wsod]
Im realy desperate, have some1 fixed this problem by himself already?

Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14

Petricanu said:
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Click to expand...
Click to collapse
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.

Slagers said:
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Click to expand...
Click to collapse
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?

Taco123 said:
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Click to expand...
Click to collapse
No I cant install WinMo anymore still white screen of death if im back from work Im gona try to install WinMo again on my HD2 hopefully this time with more luck

I go into bootloader than install a stock rom from htc site than installed till 100% than I get an error that the image file is incorrupt?
Any ideas?