Database Users

*STUCK* Help Me to Help Him

Hey guys,
I'm in need of solution to an annoying problem.
Earlier today one of the HD2 Android chefs, Motoman, shattered his Hd2 beyond repair. Luckily, his friend had left an Hd2 at his place assuming it was bricked. The device is a tmous HD2 (fairly new) that Motoman previously Hard-SPL'd. The device had worked fine for a while after that and started acting this way out of nowhere.. It can still enter bootloader but when booting normally it won't get past the splash screen.. the weird part is that the red bootup numbers don't show at all. Bootloader shows that hspl is on the device (as shown below)
Code:
PB81120 SS-B3
SPL-2.08.hspl 8G XE
0x05
CotullaHSPL 0x50
I've tried suggested all solutions I can think of including:
- Hard reset
- Task29
- Flashing Radios (yes, the correct versions)
- Flash stock using standard RUU (2.10 | 2.13 | 3.14)
- Flash stock using flashaholicRUU (2.10 | 2.13 | 3.14)
- Removing HSPL and then flashing stock
- Replacing HSPL and then flashing stock
NOTES:
- Can't flash via SD because he only has the stock sandisk 16gb
- When he had tried to flash the first time (after the half-brickness occured) the RUU didn't show a current OS image.. as if the device task29'd itself.
- The flash completes with success everytime and the splash screen changes with the different rom flashing attempts so it's flashing correctly but there seems to be some sort of block on boot..
- The device was mainly used to run android.
So........... is this a hardware issue?

Anyone out there?
This is what happened to my HD2 which leaves the reason why I need to get this other one fixed .

Try booting without the SDcard inserted, maybe its the sdcard causing the issue?

the only thing u could do is get a sd card 2 0r 1gig and try to flash a rom from that

Any luck yet moto? Were you able to find a 1 or 2GB microsd card and give it a try?
Hoping for the best...
R

Whythe HD2 willboot without an SDcard, maybe the sd port is bad, I would think getting the phone to boot is the primary issue here? The idea is to elminiate all possibilities, and the SDcard is the first thing I would remove and try booting.

tried a different battery and with no sd card?

Uhmmm this is kinda a know issues on the LEO1.5.
A lot of Bootloader issues..
I would say reflash bootloader with JTAG.

xmoo said:
Uhmmm this is kinda a know issues on the LEO1.5.
A lot of Bootloader issues..
I would say reflash bootloader with JTAG.
Click to expand...
Click to collapse
Thanks for the reply..
But earlier motoman found a quick solution..
motoman said:
Well I called a local cell repair store to see how much a new screen would be and I told them the situation I was in and they said to come in so they could look at it. They took the motherboard from my shattered phone and put it in my bricked phone for $35!!!!! And it worked!!!! The software is acting up though. The home screen wont show up for awhile and all I can do is go into the start menu
Click to expand...
Click to collapse
But I'm interested to know, since you brought up JTAG, is that the only way to reflash the bootloader?

screen replacement
motoman234 said:
Anyone out there?
This is what happened to my HD2 which leaves the reason why I need to get this other one fixed .
Click to expand...
Click to collapse
on ebay they have the screen for $118.. thats the lcd and digitizer together
each seperate is around $50 but buying it that way requires more work on u
question. can u still do touch input?

Scabes24 said:
Thanks for the reply..
But earlier motoman found a quick solution..
But I'm interested to know, since you brought up JTAG, is that the only way to reflash the bootloader?
Click to expand...
Click to collapse
a.t.m. yes, or someone has to rewrite the Frakenkaiser SPL. http://forum.xda-developers.com/showthread.php?t=394584

Lots of ppl are having problems with hardsp and newer tmous hd2, it gets stucked on the bootscreen and never displayed rom radio and protocol vers
my workarround was:
Flashed Tmo's OEM rom
Twice task29
Flashed kumars latest rom
Changed radio to 2.15.50.14
and apparently its cured... hope so...

Why not swap motherboards?

albertorodast2007 said:
Lots of ppl are having problems with hardsp and newer tmous hd2, it gets stucked on the bootscreen and never displayed rom radio and protocol vers
my workarround was:
Flashed Tmo's OEM rom
Twice task29
Flashed kumars latest rom
Changed radio to 2.15.50.14
and apparently its cured... hope so...
Click to expand...
Click to collapse
so does ur hd2 work fine now??

jibbz said:
so does ur hd2 work fine now??
Click to expand...
Click to collapse
yup, the only issue i had was playing need 4 speed shift on it, at a moment it got stuck so y pushed the reset button, i cr*pped on my pants when it displayed the bootscreen and started to vibrate continously but a quick battery pull off and a boot without SD card solved everything. Now everytime i play nfs my adrenaline rushes! not for the speed but for the fear of brickin my hd2

Questions on SPL before I send for repair

Sending in TmoUS HD2 for broken digitizer repair.
I put it back to stock rom and removed HSPL, just want to make sure this is fine because I read everywhere about SPL being 1.4x or 1.6x, mine is 2.08.
This is what my SPL screen shows
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40

The 1.42 and 1.66 were for the 512LEO. Your 1024LEO (TMOUS) started with 2.08. and since it is 2.08.000 and not 2.08.HSPL then you are back to warranty.
Off topic question, is the reset button yellow or red?

Thank you. My reset button is red. I did searching, turns out the red button HD2's have alot of problems compared to the yellow buttons.

mayurolla said:
Thank you. My reset button is red. I did searching, turns out the red button HD2's have alot of problems compared to the yellow buttons.
Click to expand...
Click to collapse
It's a myth sir!

mayurolla said:
Thank you. My reset button is red. I did searching, turns out the red button HD2's have alot of problems compared to the yellow buttons.
Click to expand...
Click to collapse
As Kurt says there is an anecdotal story still going the rounds about the reliability differences between the red and yellow reset versions of the TMOUS LEOs.

I guess there isn't. I heavily searched the forums and that's the conclusion I came up with.

Just this official communication of HTC:
The regular HD2 have a red reset button.
The T-Mous device have a Yellow button.
based on this we can conclude that almost 75% of the HD2 devices are regular devices. So, do you think that thy all have issues???

I have a TmoUS HD2 with a red button...

I just picked up a TMOUS Leo with a bad digitizer and am going to send it in for repair.
Appreciate the clarification on all of the details, so I can rest easy sending this device in for service. The former user was probably truthful in saying he hadn't modded it after all.
Also, mine's got the red Reset button, for what it's worth.

mayurolla said:
I have a TmoUS HD2 with a red button...
Click to expand...
Click to collapse
first batch of tmous had red, but after a few weeks yellow started showing up (allegedly because america sees red spots as water damage indicators, amongst other conpiracy theories).
combined with the first tmous release roms being buggy and being quickly re-released, thats where the red unstable / yellow stable myth came from.

Trying to put my phone back to stock
Hi, I need to send my HD2 out for repair under warranty and I already flash my phone back to the stock rom. The only problem is that I still have hspl on my phone. How do I uninstall hspl and install the stock spl? Any help would be very appreciated. Thanks.

enyce42k10 said:
Hi, I need to send my HD2 out for repair under warranty and I already flash my phone back to the stock rom. The only problem is that I still have hspl on my phone. How do I uninstall hspl and install the stock spl? Any help would be very appreciated. Thanks.
Click to expand...
Click to collapse
bootloader - usb - hspl4.exe - choose spl you want

Thanks Samsamuel! HSPL4 worked with no problems. Now I have another question but first I'll explain whats going on. I was running the energy2 rom for a while and loved it but just recently my touch screen stopped responding. So I hard reset it and flashed it back to the stock rom. Thats when I noticed that the SPL didnt change. I ran HSPL4 so now my SPL reads 2.08.000 instead of 2.08.HSPL. Now my question is...... since my touch screen still doesnt work, how can I check to see what actual rom is on it for warranty purposes or since the SPL is back to stock should I just not worry about it? I just received my replacement but I want to make sure I am good to go before I send back my original one. Can anyone give me some insight? It would be much appreciated. Thanks.

enyce42k10 said:
Thanks Samsamuel! HSPL4 worked with no problems. Now I have another question but first I'll explain whats going on. I was running the energy2 rom for a while and loved it but just recently my touch screen stopped responding. So I hard reset it and flashed it back to the stock rom. Thats when I noticed that the SPL didnt change. I ran HSPL4 so now my SPL reads 2.08.000 instead of 2.08.HSPL. Now my question is...... since my touch screen still doesnt work, how can I check to see what actual rom is on it for warranty purposes or since the SPL is back to stock should I just not worry about it? I just received my replacement but I want to make sure I am good to go before I send back my original one. Can anyone give me some insight? It would be much appreciated. Thanks.
Click to expand...
Click to collapse
To check your ROM version from Home Screen touch on Start Menu/ scoll down to About phone/Software Information. Once there you will see your ROM version. If you have a T-Mobile HD2 and the ROM you flashed was the latest update from T-Mobile you should have ROM version 3.14.531.1 (0466) WWE.

enyce42k10 said:
but just recently my touch screen stopped responding.
Click to expand...
Click to collapse
T-Macgnolia said:
To check your ROM version from Home Screen touch on Start Menu/ scoll down to About phone/Software Information. Once there you will see your ROM version. If you have a T-Mobile HD2 and the ROM you flashed was the latest update from T-Mobile you should have ROM version 3.14.531.1 (0466) WWE.
Click to expand...
Click to collapse
or maybe a touchscreen free method would work better,,,,
go into bootloader, it tells you the spl there. for regular hd2 any 1.x or 3.x ending .0000 is fine, for tmous any 2.x or 3.x ending .0000 is fine.
What you can do to be sure, is to remove hspl first then then flash the rom, that way teh flash changes the spl to what it shouldbe for that rom.
So for you, you already removed hspl, so just run eth flash again over usb, and it will install that roms stock spl. so example if its a 1.66 stock rom, it will downgrade 2.08.0000 to 1.66.0000

Cool, that was gonna be my next step was to flash the stock rom again but I wasnt too sure. I'll try it out and let you know. Thanks again!

samsamuel said:
or maybe a touchscreen free method would work better,,,,
Click to expand...
Click to collapse
Sorry my bad man I forgot they said the touch screen wasn't working. I feell like a moroon now lol....... I will have to pay closer attention from now on. Oh and samsamuel I have been reading alot of your post and I personaly want to thank you, you have taught me and I am sure others alot we did not know so kudoes to you my friend.

well thanks very much, you're very welcome.
I'm a fan of Karma, i'm banking on getting a 'congratulations, you win!' popup when i die.

No big deal T-Macgnolia, its a common mistake. You were only trying to help and I greatly appreciate the effort.
Thanks again Samsamuel. I flashed the stock rom again and now everything looks exactly the same way the replacement phone looks minus the working touch screen. lol! And I double checked the rom version by running the tmobile update rom again but only up to the screen where it shows your current rom version and asks if you want to update. Then I just cancelled the update once I am sure which rom is on there. So just in case anybody has their touch screen go out and they are trying to flash everything back to stock, they can try the steps that I tried to verify the rom. Thanks again everyone!

enyce42k10 said:
And I double checked the rom version by running the tmobile update rom again but only up to the screen where it shows your current rom version and asks if you want to update.
Click to expand...
Click to collapse
thats a good check, but dont rely on it totally (Its right on this occasion, im just talking for info).
The updater pulls that version info from the roms registry, so you can make it say 'ive got a great big tonka'' if you want.
That is also the reason you get no info at all when you manually enter bootloader before running the flasher, because it cant access the registry from bootloader.

Bricked HD2 Leo

Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!

prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?

Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device

prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.

Can you explain me? Please step by step... Thanks in advance

prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...

prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!

If you can't pay rent, I'm afraid I'll have to ask you vacate the area.

Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D

I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)

prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..

spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device

original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash

i have shipped original rom, still no luck

not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you

Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.

stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,

Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?

Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !

Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.

Updated ROM & Radio Now Runs very sow

I bought my HD2 after having the Desire and I got hold of the network unlock key so was free to use any network. As i'm on Three I updated with a Generic ROM and all was fine for around a week and then I got the White Screen but a Soft Reset got me back running.
Now my ROM will load but the phone is so slow I dont know how to get it back to speed. Ive put the stock T Mobile ROM back on but this does not help.
What Can I do? I think after reading that it may be a radio issue but im not that clued up here so thought i'd ask at XDA whichg ive been using for years.
If I could send it to someone to get sorted out that would be easier and i'd cover the costs,m postage and the drink for dong it.
Any advice or takers please?
Regards
Jay

jayknight71 said:
I bought my HD2 after having the Desire and I got hold of the network unlock key so was free to use any network. As i'm on Three I updated with a Generic ROM and all was fine for around a week and then I got the White Screen but a Soft Reset got me back running.
Now my ROM will load but the phone is so slow I dont know how to get it back to speed. Ive put the stock T Mobile ROM back on but this does not help.
What Can I do? I think after reading that it may be a radio issue but im not that clued up here so thought i'd ask at XDA whichg ive been using for years.
If I could send it to someone to get sorted out that would be easier and i'd cover the costs,m postage and the drink for dong it.
Any advice or takers please?
Regards
Jay
Click to expand...
Click to collapse
The unlock key applies to the phone, not the ROM. So I would flash a new ROM. You don't mention if yours is US or Euro model, it makes a difference when flashing.

could the problem be 3.14 ROM on non 3.03 spl?
enter bootloader, what does it say on the spl line?
what version ROM is running?

samsamuel said:
could the problem be 3.14 ROM on non 3.03 spl?
enter bootloader, what does it say on the spl line?
what version ROM is running?
Click to expand...
Click to collapse
This is info on the boot screen
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPDL 0x30
Wheb
R 2 08. 50. 08--2
G 15.34.50.07U
D 3energy 8GU
My phone is a euro model and ive just flashed with an Engergy Leo21916.sense25.cookie.2.0.GTX.June01
Not sure what the radio is as included with the ROM
Please help. Ive tried all types of ROMS etc and im sure its just an issue of the wrong ROM & Radio.
Will install the ROM but will just loop on first install even if i reset throughout
Liuke I said before if I could send to someone to fix it I would be most grateful.
The stock rom would be fine but would prefer the unbranded if posssible
Many thanks
Jay Kay.

jayknight71 said:
This is info on the boot screen
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPDL 0x30
Wheb
R 2 08. 50. 08--2
G 15.34.50.07U
D 3energy 8GU
My phone is a euro model and ive just flashed with an Engergy Leo21916.sense25.cookie.2.0.GTX.June01
Not sure what the radio is as included with the ROM
Please help. Ive tried all types of ROMS etc and im sure its just an issue of the wrong ROM & Radio.
Will install the ROM but will just loop on first install even if i reset throughout
Liuke I said before if I could send to someone to fix it I would be most grateful.
The stock rom would be fine but would prefer the unbranded if posssible
Many thanks
Jay Kay.
Click to expand...
Click to collapse
NRG ROMS don't contain radios. You need to visit the first page, where they recommend radios.
I would suggest downloading the official ROM for your HD2 serial number from the HTC website. Then flash that from the SD card. This will put everything, including the radio, back on the device. Then you can go from there.

Many thanks for all the answers but their not helping unfortunately. I installed ther following a Laurentius26 ROM with the following radio 2.12.5.02_2 amd finally the phone booted up after a few hours and I could slowly make my way round the phone. To press the window key would take atleast 30 seconds top bring a response. I dont know what Is causing this and it seems like the wrong ROM & Radio is on as the phone used to fly on tjhe stock ROM.
Ive tried to reinstall the Tmobile ROM but it's just the same either way and any other ROM I try does the same.4
Is there anyway of cleaning off everything from the phone and starting again from scratch as it seems definantly that there is a conflict somewhere with the software.
I opened sys info on the phone when it was working and copied down the following just inase it helps.
OS Version 5.2.23148(23418.5.11)
Manilla Version 2.5.20212114.0
ROM Version 2.05 WWE
ROM Date 06/06/11
RADIO 2.12.5.02_2
Protocol Version 15.40.50.07U_2.12.5
Please HELP! Someone out there as i'm just about stuck and i've been playing with Smartphones since the first launch of the Orange Smartphone 10 years ago.
Many thanks in advance
Jay Kau

flash task29 THEN flash another custom ROM, this will ensure any leftover **** gets erased, you might have something in NAND carrying over from ROM to ROM, none of the current radios will slow your ROM down like you're describing.
It's either this or hardware.

also try the above with your sd card and sim removed, its not unknown for a faulty card to play havoc with performance.

I tried task 28 and it never let me press the volume down at 99% so dont know if worked. Still running slow but it is running.
Wouldnt of thought was a HW issue as it was working fine last week. If I need to return to HTC where would I do that in the UK after installing standard T Mobile ROM?
Many thanks and any further help going on Flash 28 and how to do it successfully?
Regards
Jay

sorry task 29 LOL

I attempted Task 29 but after my device went straight into loading a ROM. I thought that Task 29 removed all ROMS. Info etc so you had to reinstall. What am I doing wrong as I followed the instructions to the letter from one of the posts on this excellent site.
Am getting really annoyed now. Is there someone who could do this for me if i send and pay for return postage and a drink please?
Any further info and will try again tonight one more time
Many thanks
Jay

jayknight71 said:
I attempted Task 29 but after my device went straight into loading a ROM. I thought that Task 29 removed all ROMS. Info etc so you had to reinstall. What am I doing wrong as I followed the instructions to the letter from one of the posts on this excellent site.
Am getting really annoyed now. Is there someone who could do this for me if i send and pay for return postage and a drink please?
Any further info and will try again tonight one more time
Many thanks
Jay
Click to expand...
Click to collapse
I know that this may sound strange, but try formatting your SD card. When my phone starts behaving badly, fully formatting the SD solved the problem. Checking it for system file errors usually gives the same results, but doing a full format using the SD card formatter at first gives better results.

you probably have a ROM loaded in your SD card.
if your SD card root has a file called LEOIMG.NBH then it will try to flash it immediately on booting the phone, it's part of the SPL instructions. Delete or rename that file or cancel the flash.

orangekid said:
you probably have a ROM loaded in your SD card.
if your SD card root has a file called LEOIMG.NBH then it will try to flash it immediately on booting the phone, it's part of the SPL instructions. Delete or rename that file or cancel the flash.
Click to expand...
Click to collapse
I you mean me, no I don't flash through SD. but that's a good advice as well.
when the SD has severe System file errors, I noticed that my phone ran extremely slow. correcting those errors made my phone return to it's snappy self.

[Q] White Screen of Death [HELP]

I've been searching for over 20hours around the internet for any solution to the so dreadful White Screen of Death in HD2.
This is due to a Radio Rom incopatible with the device. May be called Radio Brick! Lol
Well, it's truly desperating, as no method tried works!
The phone as soon as it's turned on just shows a white screen, no letters, no nothing.
Happened when I - dumbly - flashed a incompatible radio rom...
It has happened to a lot of other good people, but no solutions yet arrived to the internet!!!
In my case, I have hspl 2.08, and can perfectly access to bootloader, but flashing anything through SD does NOT work.
WHAT I'VE TRIED:
-flashing stock rom from HTC site, but when it comes to the radio part... UPDATE FAILED!
-tried a method here in XDA that solved a case like this but nothing... when it comes to flashing the radio, it always fails
-tried downgrading HSPL to SPL or to another version of HSPL.. curiously, the process says it was sucessfull but it changes nothing.. when i go to bootloader again the version is the same, no matter what kind of version I select...weird!
-nothing flashed through RUU works because comunication fails after 5min at 0%
-task 29 - does nothing
-changing rom/radios - always gives an error in radio update
I'm really, really, REALLY desperate, and I believe i'm not the only one in this situation!
Does someone have a brilliant idea on this?
I got it working again a couple of times but then it starts freezing after 10 hours and then i get again the whitescreen..
Now its stuck at bootloader i can't get in magldrboatloader does some1 known how i get into magldr because than i can flash another rom because in boatloader i can't flash

Hello,
I also have same problem I also cannot find a solution, Hope somebody can help us.

try j-tagging your devices !!
also it may be a hardware issue !!
good luck !!

Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.

Brain in a Nutshell said:
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Click to expand...
Click to collapse
Can you send some tutorials. Because i dont know were to start and how..

I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]

Slagers said:
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Click to expand...
Click to collapse
you'll have to try flashing your device again and again !?
but i think j tagging is the best option for this problem !! !!
you can go to the original htc store if you have not flashed hspl !!
(flashing hspl voids warranty !) !! also try to stock spl to 1.42.0000 by using hspl2 !!! http://forum.xda-developers.com/showthread.php?t=611433
if the bootloader screen (the three color screen) show 1.42.0000 spl then u can show it to the official htc stores !!
else
contact a local repair shop and try to jtag !!
may help !!
good luck !! !

So there is no fix i can do at home like flashing a specific rom or something else?

if the bootloader screen (the three color screen) show 1.42.0000 spl
Click to expand...
Click to collapse
Or 1.66.0000 or 3.03.0000

The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.

SPL-2.08. HSPL
I can flash it back to the normal rom from windows mobile. But i want a android version maybe some1 know a good rom and radio thats stays good?

nemuro said:
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
Click to expand...
Click to collapse
What kernel version you use now? and what rom and radio? So i can do the same things you did.
Can you put the link were you downloaded the kernel and rom and radio please. Thanks in advance nemuro!

You have all information in his signature.
Radio 2.12.50.02.2
ROM Redux2
Kernel Tytung (Redux2 have Tytung 12.4 by default)

how about hardware reset with pressing 3 keys at the same time?

Let me explain whats happing me all the time:
First my phone freezed up all the time and after a couple of weeks I got the [wsod] I can boot into bootloader (3 color screen) there I can flash it back to the original stock (WiMo6.5)
But I want android for my whatsapp and I like android. So I put maglder 1.13 on my phone. Then I tried android NAND flashing this worked but afther 10 hours my phone is off and I got the [wsod] again. I flashed my radio first to 2.15 but didnt help I tried this 2 times.
Yesterday I flashed my hd2 I followed a guide for android sd flashing I put the radio 2.12 on my phone and a old rom. I flashed it with haregt.exe it worked for 10 hours again then boom [wsod]
Im realy desperate, have some1 fixed this problem by himself already?

Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14

Petricanu said:
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Click to expand...
Click to collapse
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.

Slagers said:
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Click to expand...
Click to collapse
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?

Taco123 said:
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Click to expand...
Click to collapse
No I cant install WinMo anymore still white screen of death if im back from work Im gona try to install WinMo again on my HD2 hopefully this time with more luck

I go into bootloader than install a stock rom from htc site than installed till 100% than I get an error that the image file is incorrupt?
Any ideas?