tested today, flashed over XXJPX with odin as pda file, no pit (i previously used 20100512), no repartition, no lag fixes active, battery charged. the phone still works. GO, flashers!
here or here or here
behemot24 said:
tested today, flashed over XXJPX with odin as pda file, no pit (i previously used 20100512), no repartition, no lag fixes active, battery charged. the phone still works. GO, flashers!
here or here
Click to expand...
Click to collapse
Pretty sure this has been covered extensively in other threads...
Sent from my GT-I9000 using XDA App
sorry, didn't see any with the decrypted file... may this thread be trashed then, I report it to the mods
Quattro Formaggi
Model: GT-I9000 | Code: XEU | Version: I9000XXJPZ/I9000OXAJPZ/I9000XXJPZ | Date: 21.12.2010 09:07 | Size: 174,2 MB | ID: 1370850414
Click to expand...
Click to collapse
huh?
wus dat?
xan said:
huh?
wus dat?
Click to expand...
Click to collapse
So is this JPZ different than JPY or same thing?
Sent from my GT-I9000 using XDA App
chambo622 said:
So is this JPZ different than JPY or same thing?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I have no idea, guess its newer.
inside the zip file named I9000XXJPZ... etc there's a tar file named I9000XXJPY. when you flash it and check it on the phone, the version is XXJPY.
thread reported
thx mate ^^
after starting downloads via your links I get flooded by Java-Virus-Alerts by my antivirus software.
waiting for an upload at multiupload - cause I don't want to get an infected system cause of using these rubbish - fileshare-providers.
a3nalin said:
waiting for an upload at multiupload
Click to expand...
Click to collapse
here you are.
i am falshing now...
up in jpx with odin ...
Flashed over JPX with Heimdall,
factory.rfs + param.lfs + zImage + cache + mode,
No sdcard detected, gonna investigate.
I'll wait to do anything with this thread 'till it's determined if this is newer or not.
Thanks for this, just flashed with odin, no repartition on top of Doc's 6 until he brings out his next creation. All settings and apps still there and working and also rooted with the latest cf-root. It's JPY all the way.
no action necessary
It's sloooooooooooooow
What do you mean? The JPY is totally smooth.
Sent from my GT-I9000 using XDA App
Related
Someone leak it please
Model: SGH-T959 | Code: TMB | Version: T959UVJL2/T959TMBJL2/T959UVJL2/T959UVJL2 | Date: 31.12.2010 11:34 | Size: 185,23 MB | ID: 707810854
Sent from my SGH-T959 using XDA App
Just before this gets closed
JI6 is 2010 (J) October (I) release number 6, if you haven't noticed we are in January 2011, and the latest leak we have is JL5 - J for 2010, L for December, 5 is release 5.
have a nice day
lqaddict said:
Just before this gets closed
JI6 is 2010 (J) October (I) release number 6, if you haven't noticed we are in January 2011, and the latest leak we have is JL5 - J for 2010, L for December, 5 is release 5.
have a nice day
Click to expand...
Click to collapse
It was just posted on Samsungfusnews a day ago,with a build date of dec 29.
Sent from my SGH-T959 using XDA App
Is this a bad joke?
Sent from my SGH-T959 using XDA App
zender2k said:
It was just posted on Samsungfusnews a day ago,with a build date of dec 29.
Click to expand...
Click to collapse
Looks like they made a mistake. JI6 is old.
edit: Notice they also list JI5 right after it.
wished it was an L instead of an I.
Sent from my SGH-T959 using XDA App
Is there any possiblity that they could of renamed it wrong. Hopefully it was just renamed wrong if it was wouldnt it be JL6?
krazie1 said:
Is there any possiblity that they could of renamed it wrong. Hopefully it was just renamed wrong if it was wouldnt it be JL6?
Click to expand...
Click to collapse
I'm sure that's the case.
Sent from my SGH-T959 using XDA App
What's really funny is that this one shows up through Kies Mini. It now says "Latest Firmware: 2010-12-29" and that I'm up-to-date. I'm on the Oct. JI6.
It would be hilarious if it was a mislabeling of JL6 that was officially released, but due to the naming issue wasn't distributed.
then it is JI6 right?
The only way we would know is if someone leaks it out. Hopefully Krylon360 or rhcp0112345 can check it out. Because it would be really cool if it was a NEW froyo and just mislabeled.
How is the battery life?
This is not a rom. Everyone here is wondering if this New firmware that showed up on Samfirmware is New or Old which we cant tell until someone gets there hands on it.
Hey Zender2k can you post the link where you found this. I been looking but cant find it.
Nayyak said:
How is the battery life?
Click to expand...
Click to collapse
lol i was gonna do that
*Hoping for a lower case L*
krazie1 said:
This is not a rom. Everyone here is wondering if this New firmware that showed up on Samfirmware is New or Old which we cant tell until someone gets there hands on it.
Hey Zender2k can you post the link where you found this. I been looking but cant find it.
Click to expand...
Click to collapse
Here's a link to some tweets:
http://twitter.com/SamsungFUSNews
Strange, the LAST_MODIFIED date has definitely changed (in the Kies output) but the filename/encrypt stirng/crc are the same as the last time I checked (11/01/10).
Downloading whatever is on kies anyway just for giggles.
Can I flash this with Odin?
Not one bit was changed in this "new" JI6 versus what I had downloaded back in November.
md5sum from november
63f7ffe295f4fe9d8ffe4d7e248ed956 *cache.rfs
2bc0f567a418d073a45486d0d25422e6 *factoryfs.rfs
cb3cbbe0673fa97f9e821be7407e6fad *modem.bin
1a09e0809115456c738ee24f3229f193 *zImage
md5sum from whatever is on kies and dated 12/29
63f7ffe295f4fe9d8ffe4d7e248ed956 *cache.rfs
2bc0f567a418d073a45486d0d25422e6 *factoryfs.rfs
cb3cbbe0673fa97f9e821be7407e6fad *modem.bin
1a09e0809115456c738ee24f3229f193 *zImage
Do I need to uninstall voodoo? How do I do it?
Sent from my SGH-T959 using XDA App
chris071404 said:
Do I need to uninstall voodoo? How do I do it?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Did you read the entire thread? This is not a leaked anything. Its the possibility of a new build from Samsung based off of a tweet.
Sent from my SGH-T959 using XDA App
Credit and thanks for this leaked firmwares goes to powerdams: http://forum.xda-developers.com/showthread.php?t=1289875
Click to expand...
Click to collapse
Here are the Odin and CWM packages of the deodexed XXJVT firmware.
The Odin package leaves the freedom of flashing any Modem and CSC files to you, please try to use only GB 2.3.3 or 2.3.4 CSC files.
I have updated it with the latest Gmail, Maps, Market, and the latest Superuser application and su binary (3.0) are included.
Deodexed Stock XXJVT
PDA/MODEM/CSC:
XXJVT/XXJVT/OXAJVT (MultiCSC: CPW, DBT, KOR, XEO, XEU):
CWM (Double-Click to extract!): Download (175.4 MB) MD5: d224e8c03e3217ab1f0c1f5147054a57
Odin (Double-Click to extract!): Download (160.44 MB) MD5: 1a9f4e9eb366f16aaf22da97bbd883ea
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Her is the stock XXJVT Kernel for those that needs it:
Stock XXJVT Kernel
XXJVT Kernel (Double-Click to extract): Download (5.6 MB)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
The deodexed firmware has Daily Briefing included, if it does not show up when using Odin packages then it's because the CSC file that you have chosen do have Daily Briefing included and the deodexed Daily Briefing which is already included in the PDA file has been overwritten by the non-deodexed one from the CSC file.
Some CSC tar files does not install Daily Briefing application on /data/app but on /system/app, I did not try all CSC files but they used to be installed on /data/app on GB 2.3.3, however, if your device does not show Daily Briefing then use one of the following steps to install it:
Using CWM:
If you have flashed your device with a Kernel that has CWM build in the Kernel then just install this CWM file:
XXJVT_Daily Briefing_CWM: Download (7.3 MB) MD5: f39fd98b3c219cd15f134a6f639ef17b
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Using Root Explorer:
*Download and extract XXJVT_Daily Briefing_Apk.zip at the end of this post and copy the extracted InfoAlarm.apk to the Internal SD-card of your device.
*Look for InfoAlarm.apk and InfoAlarm.odex in /system/app and delete these 2 files, if they are not there then you can find and delete them at /data/app.
*Copy InfoAlarm.apk from the Internal SD-card to /system/app, reboot if Daily Briefing does not show after completing the process.
Using ADB:
*Download and extract XXJVT_Daily Briefing_Apk.zip at the end of this post and copy the extracted InfoAlarm.apk to the Internal SD-card of your device.
* Since you have chosen to use ADB then you know how to use it to gain root...etc. Excute:
su
cd /system/app
ls
Click to expand...
Click to collapse
Now see if InfoAlarm.apk and InfoAlarm.odex are there, if so execute:
busybox mount -o rw,remount /system
rm InfoAlarm.apk
rm InfoAlarm.odex
cp /sdcard/InfoAlarm.apk /system/app
busybox mount -o ro,remount /system
Click to expand...
Click to collapse
And you are done.
If the files are not on /system/app then execute:
cd /data/app
ls
Click to expand...
Click to collapse
See if the files are there, if so execute:
rm InfoAlarm.apk
rm InfoAlarm.odex
Click to expand...
Click to collapse
And you are done.
XXJVT_Daily Briefing_Apk: Download (7.2 MB) MD5: 741d125591aba85ed60ba6fa2e91e20c
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I wish you all good luck flashing your devices
You are fast man
I will flash deodexed version as soon as some modification appear.
Nice to have you back Ramad.
malcho said:
You are fast man
I will flash deodexed version as soon as some modification appear.
Nice to have you back Ramad.
Click to expand...
Click to collapse
Thanks malcho, it's good to be back
there ain't a JVT version on Samfirmwares.com? Is it ligit or leaked?
Faryaab done some good job on deodexed version JVS,butt i really missed your version.
What do you think about new JVT?
Something is diferent. definetly.Phone it's faster.I didn't notice on JVS that phone runs so fine and fast at beggining.
Or maybe it's just becouse i allways start new installation from scratch, i don't know.
Many regards
its not shown on samfirmware cuz they have a new website up called sammobile.com
SamFirmware will be a kinda backalley to the cleaner looking sammobile.com...or something like that
its posted there now (SamMobile) and im guessing later firmwares will be posted there as well
heres the link...
kie...seems i cant really post links for now...so just go to sammobile.com and register (it doesnt accept the samfirmware login cred)...its got a forum section...itll be under android phones > samsung i9000 galaxy s > official roms > Samsung I9000 Galaxy S Firmwares.
hi,
wich kernel is included?
malcho said:
Faryaab done some good job on deodexed version JVS,butt i really missed your version.
What do you think about new JVT?
Something is diferent. definetly.Phone it's faster.I didn't notice on JVS that phone runs so fine and fast at beggining.
Or maybe it's just becouse i allways start new installation from scratch, i don't know.
Many regards
Click to expand...
Click to collapse
I don't know if it runs faster than XXJVS because I did not try XXJVS at all so I cannot compare it to it. XXJVT seems good so far, it has some small modifications that was not present on earlier firmwares, but that is all I can tell because we have only had it for few hours.
gpnda said:
hi,
wich kernel is included?
Click to expand...
Click to collapse
Both files offered for download include stock Kernel.
Everything works OK... thanks.
RTL patching doesn't work, on JVR and JVS worked great
[Ramad] said:
Here are the Odin and CWM packages of the deodexed XXJVT firmware.
Click to expand...
Click to collapse
Hey man, just wanted to let you know I borrowed your CWM package and brought it over to the Captivate side. I had to replace the kernel with a cappy compatible one, but that's the only change. Thanks for doing this and doing it so FAST!!
Credited you in the OP.
Deodexed Stock XXJVT working great.
Big THX
Hi @ramad, good to have you back i always use your deodexed versions of firmwares, but what happened with latest versions like jvr, jvs you never work on those? Why? there was a problem with them? because i think i remember someone says that the latest deodexed firmwares were broken and make browser lag. Is this version good enough to make it deodexed? it is safe to flash it?
Thanks!
[Ramad] said:
it has some small modifications that was not present on earlier firmwares, but that is all I can tell because we have only had it for few hours.
Click to expand...
Click to collapse
what kind of modifications..??does it worth to change jvs?
@Ramad...just being curious..
@Ramad---I am a big fan of yours and would be eternally thankful to you for enhancing my sgs experience.
Having said that,my current curiousity stems from the fact that while you had steadfastly refused to deodex leaked firmware and even went to the extent of pulling out a JVQ that you had initially posted,what has made you change your stand and deodex JVT so quickly?
My inference would be that you have verified and found that everything is clean as a whistle with this leaked fw but wish to see a line from you too.
By the way,I have gone ahead to download and will be flashing your version sooner than later!!!!
Best wishes and thanks a million!
is the deodexed version rooted?
EDIT: I just started flashing CWM version, and Formating partions is taking a while....how long does the formating partion take?
EDIT 2: OK it completed...
Sent from my GT-I9000 using xda premium
samsung is the best
[Ramad] said:
Here are the Odin and CWM packages of the deodexed XXJVT firmware.
The Odin package leaves the freedom of flashing any Modem and CSC files to you, please try to use only GB 2.3.3 or 2.3.4 CSC files.
I have updated it with the latest Gmail, Maps, Market, and the latest Superuser application and su binary (3.0) are included.
Click to expand...
Click to collapse
why there has 2 stock jvt and how to install it? cuz i saw there has "cwm" and "odin" words. some more it's exe file, is it the same installation method to install it?
Lost CWM recovery with this flash....
how do i get CWM recovery back on jvt??
very very nice
The credit for this leaked firmware goes to sammobile, at last they did manage to leak a GB 2.3.6 with all three correct files
Click to expand...
Click to collapse
As usual, the firmware is deodexed, zipaligned, rooted and has busybox pre-installed.
Gmail, Maps, Youtube and Market are updated to the latest versions.
The CSC file on Odin package is modified by removing the empty directories where Daily Briefing used to be. A newer Daily Briefing should have been released on this firmware but it seems that the files may have been removed in the last minute or forgotten, no one knows, so I decided to include Daily Briefing from XXJVT in this firmware.
Deodexed XXJVU
PDA/MODEM/CSC:
XXJVU/XXJVU/OXAJVU: (MultiCSC: CPW, DBT, KOR, XEO, XEU)
*CWM: Download (177.5 MB) MD5: 74b2d072457fe988c86bc5e835a2c884
*Odin: Download (155.3 MB) MD5: 4bdd56d1320ec71b1face9e7c7df5ea5
Stock Kernel: Download
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I wish all of your devices good luck with this leaked firmware
(1/14/2012)
*: I did re-deodex the firmware again as it did not feel so responsive and smooth as it should be, this version feels better now, I hope that you will find it better too.
[Ramad] said:
I decided to include Daily Briefing from XXJVT in this firmware.
I wish all of your devices good luck with this leaked firmware
Click to expand...
Click to collapse
Thanks Ramad and very thoughtful of you,adding 'daily briefing'!
Best wishes.
Wipe / NoWipe
Hi fellas,
is this a non-wipe or wipe version (CWM of course)? Just to clarify if I will be able to keep my current stuff on my phone - I would like to update from 2.3.6 JW1 (kitchen). BTW thanks a million
Wipe or No-Wipe?
Could I flash in CWM over deodexed JVZ?
thx
Battery life?
VOIP over 3G ?
Happy to see media scanner picking up m4a tags.
Had a bad experience with XWJVW
Thx for reading, press THANKS if u like
sathkartha said:
Thanks Ramad and very thoughtful of you,adding 'daily briefing'!
Best wishes.
Click to expand...
Click to collapse
You are welcome
makol999 said:
Hi fellas,
is this a non-wipe or wipe version (CWM of course)? Just to clarify if I will be able to keep my current stuff on my phone - I would like to update from 2.3.6 JW1 (kitchen). BTW thanks a million
Click to expand...
Click to collapse
It's a wipe CWM package, I always make wipe packages to make sure that the user gets a clean install.
VexMunja said:
Wipe or No-Wipe?
Could I flash in CWM over deodexed JVZ?
Click to expand...
Click to collapse
Yes, it's safe to install on top of other firmwares because it's a wipe package.
O-T said:
Happy to see media scanner picking up m4a tags.
Had a bad experience with XWJVW
Thx for reading, press THANKS if u like
Click to expand...
Click to collapse
That's good to know, you had a problem with that with the last firmware.
can i install it over doctorz jw1 v 13.1
How to disable increasing ringtone in XXJVU?
Hi Ramad, why does the size on your file smaller than the size of the file on the Sam firmware? Your size is 155mb when the size at the samfirmware 255mb
I did deodex the firmware again as it did not feel as smooth and responsive at should be, I hope that you will find this version better.
hamada2232313 said:
can i install it over doctorz jw1 v 13.1
Click to expand...
Click to collapse
You can install it on top of any firmware you like, just make sure that you have all partitions running on rfs before installing.
livingwater said:
Hi Ramad, why does the size on your file smaller than the size of the file on the Sam firmware? Your size is 155mb when the size at the samfirmware 255mb
Click to expand...
Click to collapse
Because I remove the huge dbdata.rfs that is included in the CSC file, and I also compress the files as much as they can be compressed.
newly done?
@Ramad---do I understand that since the first posting on the 7th,you have deodexed and posted afresh today?
@sathkartha
Yes, I have removed the older firmware.
Just trying to install. Both 7z's are corrupt? Trying alternate download.
Ozzmosis88 said:
Just trying to install. Both 7z's are corrupt? Trying alternate download.
Click to expand...
Click to collapse
I did check downloading one of the archives and it did extract fine, please install 7zip if you do not have it installed and try again.
I guess i need to wipe coming from JVH? and if i flash this using CWM will i lose my CWM?
Mull1s said:
I guess i need to wipe coming from JVH? and if i flash this using CWM will i lose my CWM?
Click to expand...
Click to collapse
The firmware does include the stock Kernel which does not include CWM, so you need to be on RFS before installing, and yes the firmware will wipe the firmware installing sectors but it's not hard to change the CWM zip package to non-wipe and change the stock Kernel to the Kernel that you like.
@Ramad--could you please provide the stock kernel that you normally do?Thanks in anticipation and best wishes.
[Ramad] said:
I did check downloading one of the archives and it did extract fine, please install 7zip if you do not have it installed and try again.
Click to expand...
Click to collapse
Downloaded from Direct Download of Multiupload, and with the latest version of 7z, I see data corrupted file in the extraction time.
Not the problem with MegaUpload file.
Download from MegaUpload, if you get any extraction error.
I love it so much
thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work according to my need but dont think that I have just copied and pasted the installer
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android
from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad++(windows)
Click to expand...
Click to collapse
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* CAPRIVATE patch v1.0:- http://db.tt/35H5A9mH
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
update:- keep the thanks coming guys and I will add the support of aroma installer and new things just keep me encouraged by pressing thanks
Click to expand...
Click to collapse
update 2:- hi all if you like my work please rate this thread with 5 stars and also submit it as news tip
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.:- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for captivate
Click to expand...
Click to collapse
Q.:- can I flash another captivate ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or T959
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and rate this thread with 5 stars, I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
tested roms
a list of tested roms is here
1. infinitum (currently ported)
2. myics ultimate fusion
3. galaxy s cm9 kang build
4. team icssgs
Interesting. Will check it out
Sent from my SGH-I897 using xda premium
Interested to try this out... waiting for link. I'm feeling daring today.
edit: thread updated while I was posting- I'll report back when I try it out.
cool... So where is the link?
Sent from my SGH-I897 using XDA
guys I have just created the thread it will take time to complete link have been added
oooh whats this lol
sorta like Hellraiser from the infuse forum
Cool it's there yeah let's see )))))
Sent from my SGH-I897 using XDA
Really? Wow! that sounds awesome!! Gonna try it for sure.
Any feedback? Lol
Just to clarify
I flash this after ANY ICS rom on Any(galaxy s) Phone?(Such as Galaxy s II) Or Just for vibrant?
Also I flash the patch first then the rom Of My choice? Or what o.o
[email protected]$$ GONNA TRY THIS OUT NOW!
Sent from my SGH-I897 using xda premium
Can somebody explain how the hell I use this o.o Im confused
patrick8996 said:
Can somebody explain how the hell I use this o.o Im confused
Click to expand...
Click to collapse
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
shaker2k said:
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
patrick8996 said:
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
Click to expand...
Click to collapse
I think it's just i9000 and i9020 (google nexus). Not sure though.
swayjd said:
I think it's just i9000 and i9020 (google nexus). Not sure though.
Click to expand...
Click to collapse
damn it o.o
so i can flash a nexus one ics rom on my cappy? i dont get it
@OP, can you explain us what this does?
Captivate currently had TWICS. Its base code from cm9 with TW launcher and Samsung gs3 add on with devil kernel. Running this o my cappy. Super fast and stable. Just an outstanding rom.
Can someone port this to vibrant please!
What are you looking at shortbus......
*NOT SURE/CONFIRMED
But since it is in the line of the original galaxy s, I think you can just flash it, and then change modem/kernel/key layout, which is done by a script (forgot what its called in our development section)
ok, i found it
http://forum.xda-developers.com/showthread.php?t=1623840
Using that, you SHOULD be able to flash any Galaxy S ROM (except the 4G)
If it doesn't work, nothing will go wrong, most likely you will
1) boot loop
2) key layout will be mixed up(easy fix)
3) no connection (change modem/kernel)
*you said this was TWICS, make sure it is ICS and not just themed to look like TWICS.
Link to rom please?
http://forum.xda-developers.com/showthread.php?t=1625619
What are you looking at shortbus......
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
xriderx66 said:
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
Click to expand...
Click to collapse
OK so I tried it from the captivate before I saw this post. Installed rom and before it gave install complete it auto rebooted. The rom was on my phone but up was down left was right ie screen was in landscape then when I turn it sideways it would go to normal view. I rebooted to recovery and ran patch then reboot and wouldn't get past vibrant screen. I will try again with i9000 rom and let you know the results.
Sent from my SGH-I897 using XDA
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Edit: just read FAQ need to change some things in rom file. Will update after I try this
samsgun357 said:
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Try to flash the Subzero kernel from here: (use build 80 not 128) http://rootzwiki.com/topic/22833-kernelics15-june-subzero-v14-build-128-brain-dead-and-loving-it/
If you already tried it from Subzero kernel; try the Glitch kernel, its on these dev sections.
Flash either of those to the ROM you currently have, and then try to flash it.
EDIT----------------
"if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)"
It's in the patch's thread.
Do that.
I followed the thread exactly used jota changed everything and tried again. It just aborts install. I haven't given up. Gonna try again tomorrow. It beat me tonight but not for good! Thanks for everything x.
Sent from my SGH-T959 using xda premium
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
dhlalit11 said:
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
Click to expand...
Click to collapse
Thanks for input. I first tried it using a captivate port and it would install then I would run patch and it wouldn't boot past vibrant screen. Then I got the original galaxy s rom that the cappy rom was ported from. It gave the error so I proceeded to change the file as per op instructions. It would abort install with but no error status. I did it twice to make sure. If I changed all the get prop from i9000 to t959 would it work?
Sent from my SGH-T959 using xda premium
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
patrick8996 said:
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
Click to expand...
Click to collapse
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
dhlalit11 said:
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
Click to expand...
Click to collapse
I did remove and it just aborts with no explanation.
Sent from my SGH-T959 using xda premium
xriderx66 said:
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
Click to expand...
Click to collapse
Yes please! I love it on my cappy and want it on my vibrant also!
Sent from my SGH-T959 using xda premium
and what about uploading the error log from /cache/recovery
I took the twics add on from mr.mad for gs1 running cm9/slim and flashed on my vibrant running gummy 1.2.6 and it got stuck on boot . I reflashed gummy without wiping and now have all the apps from add on except for tw launcher. I guess that's a happy medium until we can get a port.
Sent from my SGH-T959 using xda premium
dhlalit11 said:
and what about uploading the error log from /cache/recovery
Click to expand...
Click to collapse
How do I extract it from root browser?
Posse magnet......
samsgun357 said:
How do I extract it from root browser?
Posse magnet......
Click to expand...
Click to collapse
Just go to that file, copy it and paste it into your SD or something, and then upload it from there.
Because I have flashed a new rom and kernel the recovery log doesn't have the abort/error info...
Posse magnet......