The credit for this leaked firmware goes to sammobile, at last they did manage to leak a GB 2.3.6 with all three correct files
Click to expand...
Click to collapse
As usual, the firmware is deodexed, zipaligned, rooted and has busybox pre-installed.
Gmail, Maps, Youtube and Market are updated to the latest versions.
The CSC file on Odin package is modified by removing the empty directories where Daily Briefing used to be. A newer Daily Briefing should have been released on this firmware but it seems that the files may have been removed in the last minute or forgotten, no one knows, so I decided to include Daily Briefing from XXJVT in this firmware.
Deodexed XXJVU
PDA/MODEM/CSC:
XXJVU/XXJVU/OXAJVU: (MultiCSC: CPW, DBT, KOR, XEO, XEU)
*CWM: Download (177.5 MB) MD5: 74b2d072457fe988c86bc5e835a2c884
*Odin: Download (155.3 MB) MD5: 4bdd56d1320ec71b1face9e7c7df5ea5
Stock Kernel: Download
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I wish all of your devices good luck with this leaked firmware
(1/14/2012)
*: I did re-deodex the firmware again as it did not feel so responsive and smooth as it should be, this version feels better now, I hope that you will find it better too.
[Ramad] said:
I decided to include Daily Briefing from XXJVT in this firmware.
I wish all of your devices good luck with this leaked firmware
Click to expand...
Click to collapse
Thanks Ramad and very thoughtful of you,adding 'daily briefing'!
Best wishes.
Wipe / NoWipe
Hi fellas,
is this a non-wipe or wipe version (CWM of course)? Just to clarify if I will be able to keep my current stuff on my phone - I would like to update from 2.3.6 JW1 (kitchen). BTW thanks a million
Wipe or No-Wipe?
Could I flash in CWM over deodexed JVZ?
thx
Battery life?
VOIP over 3G ?
Happy to see media scanner picking up m4a tags.
Had a bad experience with XWJVW
Thx for reading, press THANKS if u like
sathkartha said:
Thanks Ramad and very thoughtful of you,adding 'daily briefing'!
Best wishes.
Click to expand...
Click to collapse
You are welcome
makol999 said:
Hi fellas,
is this a non-wipe or wipe version (CWM of course)? Just to clarify if I will be able to keep my current stuff on my phone - I would like to update from 2.3.6 JW1 (kitchen). BTW thanks a million
Click to expand...
Click to collapse
It's a wipe CWM package, I always make wipe packages to make sure that the user gets a clean install.
VexMunja said:
Wipe or No-Wipe?
Could I flash in CWM over deodexed JVZ?
Click to expand...
Click to collapse
Yes, it's safe to install on top of other firmwares because it's a wipe package.
O-T said:
Happy to see media scanner picking up m4a tags.
Had a bad experience with XWJVW
Thx for reading, press THANKS if u like
Click to expand...
Click to collapse
That's good to know, you had a problem with that with the last firmware.
can i install it over doctorz jw1 v 13.1
How to disable increasing ringtone in XXJVU?
Hi Ramad, why does the size on your file smaller than the size of the file on the Sam firmware? Your size is 155mb when the size at the samfirmware 255mb
I did deodex the firmware again as it did not feel as smooth and responsive at should be, I hope that you will find this version better.
hamada2232313 said:
can i install it over doctorz jw1 v 13.1
Click to expand...
Click to collapse
You can install it on top of any firmware you like, just make sure that you have all partitions running on rfs before installing.
livingwater said:
Hi Ramad, why does the size on your file smaller than the size of the file on the Sam firmware? Your size is 155mb when the size at the samfirmware 255mb
Click to expand...
Click to collapse
Because I remove the huge dbdata.rfs that is included in the CSC file, and I also compress the files as much as they can be compressed.
newly done?
@Ramad---do I understand that since the first posting on the 7th,you have deodexed and posted afresh today?
@sathkartha
Yes, I have removed the older firmware.
Just trying to install. Both 7z's are corrupt? Trying alternate download.
Ozzmosis88 said:
Just trying to install. Both 7z's are corrupt? Trying alternate download.
Click to expand...
Click to collapse
I did check downloading one of the archives and it did extract fine, please install 7zip if you do not have it installed and try again.
I guess i need to wipe coming from JVH? and if i flash this using CWM will i lose my CWM?
Mull1s said:
I guess i need to wipe coming from JVH? and if i flash this using CWM will i lose my CWM?
Click to expand...
Click to collapse
The firmware does include the stock Kernel which does not include CWM, so you need to be on RFS before installing, and yes the firmware will wipe the firmware installing sectors but it's not hard to change the CWM zip package to non-wipe and change the stock Kernel to the Kernel that you like.
@Ramad--could you please provide the stock kernel that you normally do?Thanks in anticipation and best wishes.
[Ramad] said:
I did check downloading one of the archives and it did extract fine, please install 7zip if you do not have it installed and try again.
Click to expand...
Click to collapse
Downloaded from Direct Download of Multiupload, and with the latest version of 7z, I see data corrupted file in the extraction time.
Not the problem with MegaUpload file.
Download from MegaUpload, if you get any extraction error.
I love it so much
Related
Credit and thanks for this leaked firmwares goes to powerdams: http://forum.xda-developers.com/showthread.php?t=1289875
Click to expand...
Click to collapse
Here are the Odin and CWM packages of the deodexed XXJVT firmware.
The Odin package leaves the freedom of flashing any Modem and CSC files to you, please try to use only GB 2.3.3 or 2.3.4 CSC files.
I have updated it with the latest Gmail, Maps, Market, and the latest Superuser application and su binary (3.0) are included.
Deodexed Stock XXJVT
PDA/MODEM/CSC:
XXJVT/XXJVT/OXAJVT (MultiCSC: CPW, DBT, KOR, XEO, XEU):
CWM (Double-Click to extract!): Download (175.4 MB) MD5: d224e8c03e3217ab1f0c1f5147054a57
Odin (Double-Click to extract!): Download (160.44 MB) MD5: 1a9f4e9eb366f16aaf22da97bbd883ea
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Her is the stock XXJVT Kernel for those that needs it:
Stock XXJVT Kernel
XXJVT Kernel (Double-Click to extract): Download (5.6 MB)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
The deodexed firmware has Daily Briefing included, if it does not show up when using Odin packages then it's because the CSC file that you have chosen do have Daily Briefing included and the deodexed Daily Briefing which is already included in the PDA file has been overwritten by the non-deodexed one from the CSC file.
Some CSC tar files does not install Daily Briefing application on /data/app but on /system/app, I did not try all CSC files but they used to be installed on /data/app on GB 2.3.3, however, if your device does not show Daily Briefing then use one of the following steps to install it:
Using CWM:
If you have flashed your device with a Kernel that has CWM build in the Kernel then just install this CWM file:
XXJVT_Daily Briefing_CWM: Download (7.3 MB) MD5: f39fd98b3c219cd15f134a6f639ef17b
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Using Root Explorer:
*Download and extract XXJVT_Daily Briefing_Apk.zip at the end of this post and copy the extracted InfoAlarm.apk to the Internal SD-card of your device.
*Look for InfoAlarm.apk and InfoAlarm.odex in /system/app and delete these 2 files, if they are not there then you can find and delete them at /data/app.
*Copy InfoAlarm.apk from the Internal SD-card to /system/app, reboot if Daily Briefing does not show after completing the process.
Using ADB:
*Download and extract XXJVT_Daily Briefing_Apk.zip at the end of this post and copy the extracted InfoAlarm.apk to the Internal SD-card of your device.
* Since you have chosen to use ADB then you know how to use it to gain root...etc. Excute:
su
cd /system/app
ls
Click to expand...
Click to collapse
Now see if InfoAlarm.apk and InfoAlarm.odex are there, if so execute:
busybox mount -o rw,remount /system
rm InfoAlarm.apk
rm InfoAlarm.odex
cp /sdcard/InfoAlarm.apk /system/app
busybox mount -o ro,remount /system
Click to expand...
Click to collapse
And you are done.
If the files are not on /system/app then execute:
cd /data/app
ls
Click to expand...
Click to collapse
See if the files are there, if so execute:
rm InfoAlarm.apk
rm InfoAlarm.odex
Click to expand...
Click to collapse
And you are done.
XXJVT_Daily Briefing_Apk: Download (7.2 MB) MD5: 741d125591aba85ed60ba6fa2e91e20c
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I wish you all good luck flashing your devices
You are fast man
I will flash deodexed version as soon as some modification appear.
Nice to have you back Ramad.
malcho said:
You are fast man
I will flash deodexed version as soon as some modification appear.
Nice to have you back Ramad.
Click to expand...
Click to collapse
Thanks malcho, it's good to be back
there ain't a JVT version on Samfirmwares.com? Is it ligit or leaked?
Faryaab done some good job on deodexed version JVS,butt i really missed your version.
What do you think about new JVT?
Something is diferent. definetly.Phone it's faster.I didn't notice on JVS that phone runs so fine and fast at beggining.
Or maybe it's just becouse i allways start new installation from scratch, i don't know.
Many regards
its not shown on samfirmware cuz they have a new website up called sammobile.com
SamFirmware will be a kinda backalley to the cleaner looking sammobile.com...or something like that
its posted there now (SamMobile) and im guessing later firmwares will be posted there as well
heres the link...
kie...seems i cant really post links for now...so just go to sammobile.com and register (it doesnt accept the samfirmware login cred)...its got a forum section...itll be under android phones > samsung i9000 galaxy s > official roms > Samsung I9000 Galaxy S Firmwares.
hi,
wich kernel is included?
malcho said:
Faryaab done some good job on deodexed version JVS,butt i really missed your version.
What do you think about new JVT?
Something is diferent. definetly.Phone it's faster.I didn't notice on JVS that phone runs so fine and fast at beggining.
Or maybe it's just becouse i allways start new installation from scratch, i don't know.
Many regards
Click to expand...
Click to collapse
I don't know if it runs faster than XXJVS because I did not try XXJVS at all so I cannot compare it to it. XXJVT seems good so far, it has some small modifications that was not present on earlier firmwares, but that is all I can tell because we have only had it for few hours.
gpnda said:
hi,
wich kernel is included?
Click to expand...
Click to collapse
Both files offered for download include stock Kernel.
Everything works OK... thanks.
RTL patching doesn't work, on JVR and JVS worked great
[Ramad] said:
Here are the Odin and CWM packages of the deodexed XXJVT firmware.
Click to expand...
Click to collapse
Hey man, just wanted to let you know I borrowed your CWM package and brought it over to the Captivate side. I had to replace the kernel with a cappy compatible one, but that's the only change. Thanks for doing this and doing it so FAST!!
Credited you in the OP.
Deodexed Stock XXJVT working great.
Big THX
Hi @ramad, good to have you back i always use your deodexed versions of firmwares, but what happened with latest versions like jvr, jvs you never work on those? Why? there was a problem with them? because i think i remember someone says that the latest deodexed firmwares were broken and make browser lag. Is this version good enough to make it deodexed? it is safe to flash it?
Thanks!
[Ramad] said:
it has some small modifications that was not present on earlier firmwares, but that is all I can tell because we have only had it for few hours.
Click to expand...
Click to collapse
what kind of modifications..??does it worth to change jvs?
@Ramad...just being curious..
@Ramad---I am a big fan of yours and would be eternally thankful to you for enhancing my sgs experience.
Having said that,my current curiousity stems from the fact that while you had steadfastly refused to deodex leaked firmware and even went to the extent of pulling out a JVQ that you had initially posted,what has made you change your stand and deodex JVT so quickly?
My inference would be that you have verified and found that everything is clean as a whistle with this leaked fw but wish to see a line from you too.
By the way,I have gone ahead to download and will be flashing your version sooner than later!!!!
Best wishes and thanks a million!
is the deodexed version rooted?
EDIT: I just started flashing CWM version, and Formating partions is taking a while....how long does the formating partion take?
EDIT 2: OK it completed...
Sent from my GT-I9000 using xda premium
samsung is the best
[Ramad] said:
Here are the Odin and CWM packages of the deodexed XXJVT firmware.
The Odin package leaves the freedom of flashing any Modem and CSC files to you, please try to use only GB 2.3.3 or 2.3.4 CSC files.
I have updated it with the latest Gmail, Maps, Market, and the latest Superuser application and su binary (3.0) are included.
Click to expand...
Click to collapse
why there has 2 stock jvt and how to install it? cuz i saw there has "cwm" and "odin" words. some more it's exe file, is it the same installation method to install it?
Lost CWM recovery with this flash....
how do i get CWM recovery back on jvt??
very very nice
[RECOVERY][OFFICIAL][STOCK GB & FROYO] Recovery for S5830 - WARRANTY IS BACK...!!!
Hello guys...
I just made flashable .zip from STOCK RECOVERY for Galaxy ACE S5830...
Its good for get warranty back after backup/restore with CWM Recovery....
It will overwrite CWM Recovery by STOCK Recovery...
DOWNLOAD:
- At attachment
- file "Stock_recovery_S5830_2.3.x._by_ingbrzy.zip" for 2.3.x GINGERBREAD
- file "Stock_recovery_S5830_2.2.1_by_ingbrzy.zip" for 2.2.1 FROYO (not tested by me, please leave a feedback, thanks...)
INSTALLATION:
- Download .zip to the root folder of your SD card
- Install as .zip from CWM Recovery 4 or 5
Which stock build is it?
Thanks for sharing!
Sent from my GT-S5830 using XDA App
same for all 2.3.x builds.... but extracted from S5830XWKT7 2.3.6...
if you want, I can make a .zip also from stock recovery for 2.2.1...
where can we get stock 2.3.6 ROM these days?
@delroekid
maybe google will help you... http://forum.xda-developers.com/showthread.php?t=1399999&highlight=s5830xwkt7
ingbrzy said:
same for all 2.3.x builds.... but extracted from S5830XWKT7 2.3.6...
if you want, I can make a .zip also from stock recovery for 2.2.1...
Click to expand...
Click to collapse
Thanks mate, the one you made should be more than enough for me.
Just a noob question: can I flash it straight away on top of CM 7.2 RC0 (after wiping, of course) ?
Great Job ingbrzy !
Nice +1 for this Thank you
AWESOMESAUCE !
Herpderp Adreno + Tegra.
delroekid said:
where can we get stock 2.3.6 ROM these days?
Click to expand...
Click to collapse
www.sammobile.com register and then you can download any firmware you choose.
I have it for all causes ready downloaded in my phone ) ready for emergency use...
Sent from my GT-S5830 using XDA App
I was seraching this yesterday!! Very good!!!!
+1
hats off great work ....i thought this was impossible seems i am wrong
Great stuff dude, thanks!
This zip will get back MY ORIGINAL STOCK?
If i flash a stock ROM from samfirmware, the recovery goes back to stock also. Why is this zip better?
twister26 said:
If i flash a stock ROM from samfirmware, the recovery goes back to stock also. Why is this zip better?
Click to expand...
Click to collapse
It's a very good solutions when you for example break you USB port in Ace.
File size
I've just noticed the filesize: only 6.6MB Is that normal???
ingbrzy said:
Hello guys...
I just made flashable .zip from STOCK RECOVERY for Galaxy ACE S5830...
Its good for get warranty back after backup/restore with CWM Recovery....
It will overwrite CWM Recovery by STOCK Recovery...
Click to expand...
Click to collapse
good job mate, it's very useful...... thanks for sharing
mastrone said:
I've just noticed the filesize: only 6.6MB Is that normal???
Click to expand...
Click to collapse
It's a compressed recovery.img inside the archive , the real size is bigger
Herpderp Adreno + Tegra.
thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work according to my need but dont think that I have just copied and pasted the installer
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android
from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad++(windows)
Click to expand...
Click to collapse
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* CAPRIVATE patch v1.0:- http://db.tt/35H5A9mH
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
update:- keep the thanks coming guys and I will add the support of aroma installer and new things just keep me encouraged by pressing thanks
Click to expand...
Click to collapse
update 2:- hi all if you like my work please rate this thread with 5 stars and also submit it as news tip
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.:- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for captivate
Click to expand...
Click to collapse
Q.:- can I flash another captivate ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or T959
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and rate this thread with 5 stars, I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
tested roms
a list of tested roms is here
1. infinitum (currently ported)
2. myics ultimate fusion
3. galaxy s cm9 kang build
4. team icssgs
Interesting. Will check it out
Sent from my SGH-I897 using xda premium
Interested to try this out... waiting for link. I'm feeling daring today.
edit: thread updated while I was posting- I'll report back when I try it out.
cool... So where is the link?
Sent from my SGH-I897 using XDA
guys I have just created the thread it will take time to complete link have been added
oooh whats this lol
sorta like Hellraiser from the infuse forum
Cool it's there yeah let's see )))))
Sent from my SGH-I897 using XDA
Really? Wow! that sounds awesome!! Gonna try it for sure.
Any feedback? Lol
Just to clarify
I flash this after ANY ICS rom on Any(galaxy s) Phone?(Such as Galaxy s II) Or Just for vibrant?
Also I flash the patch first then the rom Of My choice? Or what o.o
[email protected]$$ GONNA TRY THIS OUT NOW!
Sent from my SGH-I897 using xda premium
Can somebody explain how the hell I use this o.o Im confused
patrick8996 said:
Can somebody explain how the hell I use this o.o Im confused
Click to expand...
Click to collapse
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
shaker2k said:
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
patrick8996 said:
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
Click to expand...
Click to collapse
I think it's just i9000 and i9020 (google nexus). Not sure though.
swayjd said:
I think it's just i9000 and i9020 (google nexus). Not sure though.
Click to expand...
Click to collapse
damn it o.o
so i can flash a nexus one ics rom on my cappy? i dont get it
@OP, can you explain us what this does?
Courtesy of allmighty
[size=+2]Samsung-Updates.com[/size]
here's the latest Jelly Bean internal Samsung release leak for international version of SGS3 (GT-I9300).
Here you can find OTA update for Galaxy S3 (GT-I9300) to the latest available version that were leaked (higher version than was released earlier).
[size=+2] DOWNLOAD HERE! [/size] or HOTFILE or DEV HOST or at Google Docs
You can apply this package trough the recovery menu and update your ICS 4.0.4 directly to latest Jelly Bean
- Download base (needed) rom : I9300XXBLG8/I9300OXABLG8/I9300XXLH1/I9300XXBLG8 region BTU ( http://samsung-updates.com/fw/Samsung-Updates.com-GT-I9300_BTU_1_20120806161432_al03it6wa2.zip)
- flash it
- transfer OTA file to your phone
- reboot to recovery
- install from zip
- reboot
Click to expand...
Click to collapse
[size=+1] DO NOT MIRROR THIS FILES, ITS NOT NEEDED!
If you like to use this in your ROM, please credit samsung-updates.com for leak![/size]
if you like this one just push donate and "send me a beer"
thank you, for sharing
i hope wlan props are gone
daaahh, another one! haha
Sent from my GT-I9300 using Tapatalk 2
they almost start to poop jelly beans over there at Samsung..
they not have a jelly wall to contain those leaks?
oooyyii
.
Thank you for sharing !!
downloading.........
IN10TIONs said:
they almost start to poop jelly beans over there at Samsung..
they not have a jelly wall to contain those leaks?
oooyyii
.
Click to expand...
Click to collapse
Why wouldn't they? They purposely leak it to have 1000's of xda users beta test it for them for free.
Downloading... will flash and do bug report asap
Thanks for sharing.
Do I have to download and install both files (and install the bigger one at first)?
The other 4.1.1 download threads contain 1 file only, thats why I am asking.
Gz
Xap
I doubt that all of this can still be called "leak" :laugh:
Samsung, I hate you for teasing me
Xapier said:
Thanks for sharing.
Do I have to download and install both files (and install the bigger one at first)?
The other 4.1.1 download threads contain 1 file only, thats why I am asking.
Gz
Xap
Click to expand...
Click to collapse
depends on what is your current firmware :fingers-crossed:
yangkwong said:
depends on what is your current firmware :fingers-crossed:
Click to expand...
Click to collapse
Thanks for the quick answer.
I am on 4.0.4
Build:
IMM76D.I9300XXBLG8
greets
Samsung had two options for testing their firmwares.
(1) Hire expensive testing team
(2) Leak the firmware and get thousands of testers on XDA for free!!!!!
By adopting second option, now all samsung need is one kid to sit infront of computer browsing on this forum and noting down bugs.
LOL
i must say.. ur good man, nice adam!
Xapier said:
Thanks for the quick answer.
I am on 4.0.4
Build:
IMM76D.I9300XXBLG8
greets
Click to expand...
Click to collapse
Do you really need to go back to LG8 to flash this one? Is it not possible to flash with LH6 installed?
You need to modify it to do so. It haz checks in update-script (first 2 lines AFAIK)
aggro666 said:
Do you really need to go back to LG8 to flash this one? Is it not possible to flash with LH6 installed?
Click to expand...
Click to collapse
Don't you want to help samsung test the code that updates from ICS to JB?
dont work status 7!!
Would it be possible to flash this directly over the LH6 leak?
That interest me as well.
I just download it now. I like to flash it over the 2nd leak from Sammobile after i tried it several time with the method mentioned here.
I always got Error 7.
My deodexed releases aim to be as-pure-stock-as-possible, just with a magic touch of being ready for all community modifications, such as theming, debloating, customizing and so on.
You should consider them as an alternative to official pure stock. Especially because they're CWM-compatible, which means that you don't need Odin in order to be up-to-date.
Notice to all developers: Feel free to use my deodexed release as a "base" for your ROM. I'm doing the same with ArchiDroid.
Today we have:
Model: GT-I9300
Country: United Arab Emirates
Version: Android 4.3
Changelist: 2454463
Build date: Tue, 21 Jan 2014 04:49:01 +0000
Product Code: XSG
PDA: I9300XXUGNA7
CSC: I9300OJVGNA1
MODEM: I9300XXUGMK6
Ultra zipped (1,15 GB into 750 MB)
Rooted (SuperSU 1.91)
Deodexed ([Bak]smali 2.0.3)
Zipaligned (R22.3)
Busybox (1.22.1)
[*] ArchiDroid Init.d
[*] ArchiDroid F2FS-friendly method of flashing
Click to expand...
Click to collapse
Standard CSC included, as per community request.
This release has been possible thanks to reworked JustArchi's Android Kitchen. Init.d is indepdendent, kernel bundled with ROM isn't modified in any way.
Nothing else has been made/changed. No apps removed. No KNOX. This is one-time release. You can use Rom Cleaner for fast debloat. This is the "base" for upcoming ArchiDroid 1.7.9, so if you're looking for something more advanced feel free to try my "monster" .
Modem comes in standalone package, rom itself does not change your modem by default.
Previous releases:
XXUGNA5
XWUGML4
XXUGML2
XXUGMK6
XXUGMJ9
This ROM uses new set_metadata permissions. Up-to-date recovery is required - initial support was added in CWM 6.0.4.4!
This ROM doesn't work with EFS V1, you need EFS V2 (XXEMG4+) modem to use it!
(Unless you're running modified custom kernel)
This is "No Wipe" ROM but I can't assure you that you won't run into problems without wiping. In case of issues - Wipe Data/Factory Reset.
This is a big rom, be patient during flahsing and booting.
Download: MEGA | Dev-Host
Standalone XXUGMK6 Modem: MEGA | Dev-Host
Standalone Kernel: MEGA | Dev-Host
Have fun, hit thanks if I deserve it :highfive:.
New version on SamMobile? STOP! Read first!
Notice about Sammy's Releases
Due to the fact that I'm getting excessive amount of PMs and other requests for releasing every available version on SamMobile, I'll now tell you how Samsung releases work.
The ONE and ONLY important thing for measuring whether release is old or new is the changelist.
Higher changelist number = Newer release
Changelist covers the PDA (ROM), the kernel, and probably also the modem, but I'm not sure due to the fact that I can't check it.
Sometimes you can notice that we're seeing newly-compiled ROMs with actually lower changelist than already released one. This is due to the fact that some carriers need time to prepare their releases, and they may start for example month ago, from month-old sources, and finish just now. These releases are absolutely pointless for us, therefore I won't waste any time on creating a release older than already available.
It REALLY doesn't matter if the ROM has been compiled month ago or yesterday, the thing which matters is the source, and the version of the source is directly connected with the changelist number.
Of course you don't need to agree with my opinion and you can stick with the ideology that CM 10.1 compiled yesterday is newer than CM11 from week ago, just please, find other developer or make your own release then, thank you.
Thanks you Archi. Waiting for Dev-Host, still uploading.
azrao86 said:
Thanks you Archi. Waiting for Dev-Host, still uploading.
Click to expand...
Click to collapse
Up .
JustArchi said:
Up .
Click to expand...
Click to collapse
downloading now :good:
Awesome @JustArchi. Great job! Thanks. :good:
JustArchi said:
Up .
Click to expand...
Click to collapse
You're really machine!!!
Xnks, bro...
There's standalone link of kernel, please?
Are there the standard languages or just english and arabic ones?
mischa_martin said:
Are there the standard languages or just english and arabic ones?
Click to expand...
Click to collapse
There's my Polish and all others.
T0nyCr said:
You're really machine!!!
Xnks, bro...
There's standalone link of kernel, please?
Click to expand...
Click to collapse
https://dl.dropboxusercontent.com/u/23869279/Temp/boot.img
Notice: Unmodified, stock kernel, no init.d (due to ArchiDroid Init.d in rom)
JustArchi said:
There's my Polish and all others.
https://dl.dropboxusercontent.com/u/23869279/Temp/boot.img
Notice: Unmodified, stock kernel, no init.d (due to ArchiDroid Init.d in rom)
Click to expand...
Click to collapse
Really appreciate!!!
Just 2 few questions:
1) updater-script file ends in: package_extract_file("boot.img", "/dev/block/mmcblk0p5");
with no installation step?
2) updater-script-MODEM with no mention in updater-script file and this file itself just have this unfinished line: package_extract_file("modem.bin",
with no destination folder and commit or quotes characters in line ( [$PATH]"); ) and not installation step?
This is fine or I downloaded wrong?
T0nyCr said:
Really appreciate!!!
Just 2 few questions:
1) updater-script file ends in: package_extract_file("boot.img", "/dev/block/mmcblk0p5");
with no installation step?
2) updater-script-MODEM with no mention in updater-script file and this file itself just have this unfinished line: package_extract_file("modem.bin",
with no destination folder and commit or quotes characters in line ( [$PATH]"); ) and not installation step?
This is fine or I downloaded wrong?
Click to expand...
Click to collapse
1. There's no need of instalation, update-binary automatically writes boot.img on proper block, in this case package_extract_file acts the same as write_raw_image.
2. This is a junk from my reworked kitchen . Thanks for mentioning.
And yes zip is completely fine.
Is there a flashable .zip file for the stock kernel?
Thanks in advance.
netblaster said:
Is there a flashable .zip file for the stock kernel?
Thanks in advance.
Click to expand...
Click to collapse
Give me a second.
https://mega.co.nz/#!3FIHnT5A!j88ZgGMPYr7OkKeD2f9R9QbR4qbcw3REItGFqnQaXmA
is it possible to delete the updater-script-MODEM?
SavanTorian said:
is it possible to delete the updater-script-MODEM?
Click to expand...
Click to collapse
Feel free to delete it.
Thank you!
:good:
ty
JustArchi said:
Give me a second.
https://mega.co.nz/#!3FIHnT5A!j88ZgGMPYr7OkKeD2f9R9QbR4qbcw3REItGFqnQaXmA
Click to expand...
Click to collapse
This supports init.d I guess...
T0nyCr said:
This supports init.d I guess...
Click to expand...
Click to collapse
No, it doesn't.
Mr. Archi, you are one of a kind. Thanks for the quick update!
Sent from my ? using my ?.
JustArchi said:
No, it doesn't.
Click to expand...
Click to collapse
JustArchi,
If you want i can change the kernel to work with EFS_V1 and post here for you.