Database Users

HTC 3450, HELP! doesn't enter bootloader mode

Hi everyone,
Before opening this thread i have done a lot of search about my problem but i could not find any solution. My pocket pc is HTC Touch 3450, it works fine but i want to unlock its CID. I tried every combination to enter bootloader mode (CAMERA + SOFT RESET, or CAMERA+POWER+SOFTRESET etc.) but when i try, it boots normally. Also there is no SD card in it. As i said everything works fine. I tried to upgrade its ROM but i got CONNECTION error in %0 of progress. I know to upgrade ROM i must enter bootloader but as i said i cannot. Also i can try to upgrade ROM via SD card but again i have to enter bootloader mode, but as i said i cannot.
When i try to enter bootloader mode it boots normally and begins the system and works everything fine. I dont know its history, i mean its my new second hand phone.
Anyone, any idea? Please help me!!!!.

Same problem here - 155 views and no answers

Phone turned off. Hold down camera button, press power button to boot, while still holding camera button until the bootloader appears...
If you can't get your device into bootloader and you have tried all options, which it seems like you did. Consider the fact that you may have a clone, where did you purchase the phone from? This issue has been mentioned before, and that was the answer to why the bootloader wouldn't load.
Easy way to tell is check the battery, it'll say HTG instead of HTC.

Tried that matey - no good.
You see I thought that mine was a clone due to the trouble getting into bootloader, but I can see no other reason to believe its a clone, Battery says HTC as well.
I have had plenty of experience updating roms on htc devices but this has me stumped.

unfortunately it is a HTG battery, then it is a clone When i try the combinations, (power off then push power buton+camera button) it doesn't enter bootloader mode.Now i knoe that the problem is being a clone.
My next question is, what is the way to enter bootloader in clone HTC (HTC with a HTG battery)?????
Thanks

same problem. please help

crypto 2008 , same problem here.nobody knows how to do this. please help

It's the same problem for all clones.
Seems there is no way to enter the bootloader mode

Clones enter bootloader by holding the volume slider UP and pressing reset. If you hold the volume slider up and hold the camera button and hit reset you can hard reset it.

Can't access to bootloader !!

Hi all !
I can't enter the bootloader screen (screen with blue, green and red stripes) by pressing the volDown key after a soft reset. The phone simply boot on the rom and don't let me see the desired screen.
Is someone can help me to retrieve access to the bootloader screen ?
Radio 2.10.50.8
ROM EnergyRom GTX [13th may 2010]

it shuold be as simple as holding down vol key when powering it on...like you are doing.

u really shutted it fully down and powered on again? or just softreseted via software?

I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !

Fl3eK said:
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Click to expand...
Click to collapse
mmh.. and if u want to hard reset ur phone? i mean.. when u press both, volume up and down at the start.. does atleast the hardreset screen appear?

No It change nothing ... I really can't access this screen anymore. I try also to upgrade to HSPL 2.X but the issue persists

Oo thats weird.. for what do u need the screen anyway?
i would flash a new rom maybe.. so the prob could be solved that way, but i really dont know if that will help >.<

try it with the battery cover off to get a better press
power off
press and hold and keep holding vol down
press and release power KEEP PRESSING VOL DOWN
only release vol once three colored screen shows.

samsamuel, I flash my HD2 more and more but since I test the radio 2.10.50.XX, the device just boot normaly and it not let me enter the bootloader screen (I keep the volDown key during booting after turn on the device like you said)
Darksorrow, I need to get back to radio 2.08.50 because the 2.10.50 sucks my battery very quickly ... :'( I'll try to flash the device with an other ROM ... with luck It could give me back the access to bootloader ...

the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.

samsamuel said:
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
Click to expand...
Click to collapse
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?

Fl3eK said:
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Click to expand...
Click to collapse
Its possible, but unlikely.
I dont mean to sound like i dont believe your results, but i cant help the feeling that you arent doing it right.
Every post so far where someone couldnt enter bootloader / start a hard reset has been down to the order of pressing and the length of the press.
Its usually that they are
1 - pressing and holding both power and vol
or
2 - releasing vol down when they release power
or
3 - not pressing vol hard enough (this is where the battery cover off helps, it allows the button to press more firmly.)
or
4 - pressing power before they press and hold vol.
all of which will fail to enter bootloader.
ill repeat the process, just for clarity.
power off the phone
press hold and keep holding 'vol down'
tap and release power BUT keep vol down pressed
release vol down when the three coloured screen appears.
any more than that i cant suggest, sorry.

Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader

It works fine. Thank you.

zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
Thanks a lot this work for me too !
@samsamuel : I understand the way you explain me Even if I kept the vol down touch after powering the device I just see the device booting on ROM ...

I have one more question, do you think I can perform a format (with MTTY) considering the fact that I can't access to bootloader at startup ? I hope this work but the risk is that I can't never install a ROM after formatting if I still can't access to bootloader by pressing volume down at startup ....

Thanks Zelender, the file works wonderfully. ...and yes, I'm sure I was using correct procedure to enter bootloader as I had done it before.

I have a similar situation, but I have a Nexus One. I know this is not the area for the N1, but this is the only place where someone is having the same issue of not being able to go to the bootloader. I press vol down while hitting power button. This would always give me the boot loader menu, but instead it just boots to the OS.
Any way I can regain access to the bootloader, because my os is messed up and my radio isnt operating.
Thanks

Hum ... I just process an task 29 via MTTY and the result is .... "phone sent for repair" so for those who have the problem, DO NOT EXECUTE TASK 29 or you'll have a blank phone and you'll can't install new ROM.

I can't return to winmo rom.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
I've the same problem as Fl3ek : I flashed a nand android rom with magldr and I can't return to bootloader mode and I can't make a hard reset. The only thing working is magldr but only for flashing nand android roms (i tried 3 of them : they all work ).
Is there an APK like bootloader.cab ? Or a program to flash or activate bootloader in nand with magldr ?
I tried quick boot with bootloader option but it does'nt work.

[Q] HTC HD2: Entering into 3 color mode without "vol down" button

Hi all,
While fixing my broken LCD+digitizer, I broke the flex cable for volume up/down part of the flex. My HD2 is working fine except the volume up/down buttons.
It's a genuine HD2 for now, but I want to be able to install new roms especially Win7. But all the docs that I read here or the videos that I watched in youtube are saying use "vol down" button for 2-3 seconds to get into 3 color mode.
Unfortunately my "vol down" button does not exists as the flex going to the vol up/vol down is broken
Is there a way to get into 3 color mode to be able to install new ROMs (or HSPL if needed) without using vol down button ?
Thanks!
frm

Honestly i really doubt it, but look around or google it, you might be lucky and there might be a way.

I spent maybe hours for googling this but couldn't
hope some experts can shed a light

frmmain said:
I spent maybe hours for googling this but couldn't
hope some experts can shed a light
Click to expand...
Click to collapse
Actually there is .. In WiMo 6.5 Dev section I tried a few roms that had some kind of an application called EBL (Enter Boot Loader) it launches the Bootloader directly from within WinMo.
But remember I't only a temp fix .. you should replace/fix your vol
I will provide that cab whenever i find it

If you already have a custom winmo rom on phone try holding the end key, see if you have a advanced menu with bootloader option on and it will reboot phone into it.
If not, try searching for "advanced menu" or "advanced menu end key" etc and should find an installer for it.

doesn't every custom rom has an .exe. with enter bootloader?

erikvario said:
doesn't every custom rom has an .exe. with enter bootloader?
Click to expand...
Click to collapse
now that you mention it, that is true, but i don't think anyone uses that cause of the fact that there button works... lol

Let's think a little further. After flashing MAGLDR, how are you going to access the "usb flasher" mode?

cortk said:
Let's think a little further. After flashing MAGLDR, how are you going to access the "usb flasher" mode?
Click to expand...
Click to collapse
You're right, he can flash hspl and put custom wm65 roms on his phone and run android off of sd cards, but without a working volume button, he can't use magldr to flash nand android or wp7 builds. In fact, if he flashes magldr, which I think he can still do, he will be stuck with just magldr and be unable to do anything or flash anything... and unable to get back into the boot screen to flash back to any wm65 roms.

Buttoms are messy / boot problems

Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.

Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
---------- Post added at 07:26 PM ---------- Previous post was at 07:07 PM ----------
keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast

keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
Click to expand...
Click to collapse
I am going to try to explain this a little and maybe it will help you out.
keetsy said:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
Click to expand...
Click to collapse
What you are talking about is called bootloader and this is probably caused by a faulty volume down button. Unless you check the hardware for the volume down button and fix it if it is faulty there is no other fix for this issue unless you are using Windows Mobile then you can use the enterbootloader.exe.
keetsy said:
- I couldn't enter into rom because it froze to the part where HTC is green with black background
Click to expand...
Click to collapse
It froze on what is called the splash screen and this is not all in all just a major issue and can more than likely be fixed.
keetsy said:
- Rom worked with safe mode
Click to expand...
Click to collapse
Safe mode on a device is the same as safe mode on a computer, it will allow you to boot the device and hopefully find the problem or fix the problem.
keetsy said:
- USB flasher doesn't work in malgdr
Click to expand...
Click to collapse
This is probably a driver issue and is only needed to flash a Android recovery or to flash a Windows Phone ROM.
keetsy said:
- Buttons are messy ( but i have now figured how they work )
Click to expand...
Click to collapse
I would like some more info on this actually as far as what buttons you are talking about. It also plays into what I said about a faulty volume down button.
keetsy said:
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
Click to expand...
Click to collapse
This is because you have MAGLDR installed, there is no software for the device to reset.
keetsy said:
+ I'm able to go to AD recovery, and do anything there
Click to expand...
Click to collapse
This is good because I think recovery just may be what you need to use to fix your issue.
keetsy said:
+ I'm able to use USB MassStg
Click to expand...
Click to collapse
This is also good because you can transfer any needed files to your SD card using this.
keetsy said:
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
I assume you are using a Android ROM because you said you can still use AD recovery. I suggest you read the first couple of post in the thread for the ROM you are using to find the suggested partition size you need as you may not have the right partition size if that is the case you will need to re partition your device but without being able to use USB flasher you will not be able to flash a new recovery with your new partition size. But you you should be able to edit a recovery and use it with AD sd, look in my guide linked in my sig for more infor on using recovery from SD card.
Also you can try to do a wipe of your cache and delvik cache and see if that helps. You can also try to make a backup of your ROM and re flash the Android ROM to see if that helps.
But to be honest with you your situation is odd because it did not happen right after you flashed a ROM. This sorta leads me to beleive you may have hardware issues.

LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM

keetsy said:
LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM
Click to expand...
Click to collapse
I watched the video and I gotta say I think you have hardware issues. I would recommend you find someone to take a lookk at you volume buttons and the hardware buttons to see about fixing them. Both sets of buttons are replaceable.

I'll try to take care of that.
Thank you really much !

key combination won't work for download mode

No matter how many times I have tried, the combination of Vol Down+Home+Power together does nothing, the phone just continues to load normally, I cannot access download mode.
My S5 (G900F) is on Android 6.0.1, which was the last software update for the phone, I would like to try 7(Nougat) but can't get anywhere near rooting or flashing.
The phone functions fine as it is, but for the last ?? Years I have used Windows Phones so android of quite alien to me but more preferable than apple. I would like to check out what's available in different builds.
anyone any ideas why it won't let me in, USB is enabled and it is in developer mode.

It can be a bit fiddly to do when you're starting off. What I normally do is press and hold in order volume down, home and then power. The boot wont start unless you press the power button so what this does is ensure that the other 2 are pressed by the time you press the power button. Only stop holding all 3 buttons down when it boots into download mode. Hope this helps

Eggleston11 said:
It can be a bit fiddly to do when you're starting off. What I normally do is press and hold in order volume down, home and then power. The boot wont start unless you press the power button so what this does is ensure that the other 2 are pressed by the time you press the power button. Only stop holding all 3 buttons down when it boots into download mode. Hope this helps
Click to expand...
Click to collapse
It doesn't work, That is what I have been doing, The Galaxy s5 screen appears, I keep holding, it disappears, vibrates and re-appears, I keep holding and it disappears again, vibrates and re-appears, it does this 5 times before I get fed up and release the power button and then the other 2, it then goes into the Samsung screen and continues loading, sometimes it goes to the "Optimising Apps" mode with the two spinning cogs before finishing the load sequence.
Thanks for the suggestion but it's not playing as it should.

comuscomp said:
It doesn't work, That is what I have been doing, The Galaxy s5 screen appears, I keep holding, it disappears, vibrates and re-appears, I keep holding and it disappears again, vibrates and re-appears, it does this 5 times before I get fed up and release the power button and then the other 2, it then goes into the Samsung screen and continues loading, sometimes it goes to the "Optimising Apps" mode with the two spinning cogs before finishing the load sequence.
Thanks for the suggestion but it's not playing as it should.
Click to expand...
Click to collapse
Weird...
Plan B - Do you have ADB installed on your computer? link: https://forum.xda-developers.com/showthread.php?t=2588979 (for windows install just in case you don't have it - if you have a Mac or Linux, you'll have to look for it).
Get familiar with ADB if not already: https://www.androidpit.com/how-to-install-adb-and-fastboot
Open command prompt (on windows), enter the command "adb reboot recovery" . It should boot into recovery.
The usual disclaimer is that I am not responsible in the unlikely event that something goes wrong to your phone or computer. Hope this helps

Eggleston11 said:
Weird...
Plan B - Do you have ADB installed on your computer? link: https://forum.xda-developers.com/showthread.php?t=2588979 (for windows install just in case you don't have it - if you have a Mac or Linux, you'll have to look for it).
Get familiar with ADB if not already: https://www.androidpit.com/how-to-install-adb-and-fastboot
Open command prompt (on windows), enter the command "adb reboot recovery" . It should boot into recovery.
The usual disclaimer is that I am not responsible in the unlikely event that something goes wrong to your phone or computer. Hope this helps
Click to expand...
Click to collapse
Thanks for the help, now we have a tale of woe. some things were best not touched, after following a fairly well detailed account of updating to Android 7 the screen filled with line after line of red text and froze.
I had to remove the battery to turn it off, now I have a brick that will not boot. I get the Samsung Galaxy S5 flash screen with a little yellow "Set Warranty Bit : kernel" at the top of the screen.
I think I had better post a new thread about this.

comuscomp said:
Thanks for the help, now we have a tale of woe. some things were best not touched, after following a fairly well detailed account of updating to Android 7 the screen filled with line after line of red text and froze.
I had to remove the battery to turn it off, now I have a brick that will not boot. I get the Samsung Galaxy S5 flash screen with a little yellow "Set Warranty Bit : kernel" at the top of the screen.
I think I had better post a new thread about this.
Click to expand...
Click to collapse
Questions that will help in assisting you: Can you still boot into download or recovery mode? What nougat ROM did you flash? What steps did you take to flash the nougat ROM? What happened?
If you can enter download mode, then you can reflash a stock ROM via odin to hopefully save your S5, you can find one on Sam Mobile. Without the right info, that is the best general advice I can give.
You can try posting a new thread to hopefully recruit more help. If you decide to do so, include the answers to the questions I have posted above. Otherwise, I am happy to attempt to assist you in recovering the functionality of your S5 on this thread.

Eggleston11 said:
Questions that will help in assisting you: Can you still boot into download or recovery mode? What nougat ROM did you flash? What steps did you take to flash the nougat ROM? What happened?
If you can enter download mode, then you can reflash a stock ROM via odin to hopefully save your S5, you can find one on Sam Mobile. Without the right info, that is the best general advice I can give.
You can try posting a new thread to hopefully recruit more help. If you decide to do so, include the answers to the questions I have posted above. Otherwise, I am happy to attempt to assist you in recovering the functionality of your S5 on this thread.
Click to expand...
Click to collapse
No, I can't get into download or recovery, I have tried with the 3 key combo and using ADB, the first still refuses to work and the ADB doesn't find the device.
Smart Switch won't connect nor will Odin.
Lineage 14-1. and open-gapps-arm-6.0-micro.
I had opened a new thread before I got your reply, how do I include your answers into that tread? "Bricked after attempted Update: Help".