Hello, if i use mtty and enter task 32 and after task 37 there is some (alot) info.
But what does it do ?
Hi,
I am trying to run windows 95 on my HTC TyTN II and i stil get an error that say : No memory available - program will exit.
and in command line it write:
**** No memory! ****
Can't allocate 34217983 bytes
I tried to change value megs in bochsrc.txt but without gain...
I don't know which memory need the program, so if you can help me please reply.
--------------------------
Sorry for my english...
question: what program are you using to boot it? sounds interesting...
problem with run win95 on htc kaiser (TyTN II)
I've followeb steps posted by nmilosev on this page: http://forum.xda-developers.com/showthread.php?t=362344&page=3
I use bochs 2.3.5 for boot.
Hello friends i'm italian and sorry for my english.
I have a problem with my hermes200.
I have flashing on my tytn a rom kitchen using "package tool by bepe" with nb IPL, SPL, Mainsplash, Subsplash, ExtROM and GSM extrated from original rom htc tytn wm6 and a OS.nb extrated from rom kaiser ITA wm6.1.
When the flashing is termined the hermes don't start: push power botton but the screen is black and only green light is ON.
I have flashed original htc hermes wm6 but i have "error 226 flash write" when the process is at 89%.
I have IPL-1.04 and SPL-2.04. CID.
SPL 2.10, SPL 2.20, SPL 2.30 are not possibile to install.
i have try command with mtty tool:
- task 32 -> FF
- task 28 -> format storage success
- task 2a -> fix bad block
- info 8 -> much bad block Os Win CE
I've try to reflash the original rom but the problem is the same
The battery don't possibile to charge and level should be of 40%.
Help me please....
Tanks!!!
Hi everyone,
It happened to me a lot of strange things. I tried to upgrade my herald with a rom from Tribulattifather . The first thing I've done is to install Hardspl. I connected my phone lauched the .exe and it gave me an error by 1%. My phone was freezed with a white screen. I waited a long time and shut it down. From this moment it won't restart and I can only access to the rgb menu:
IPL 1.08.0001
SPL 1.08.0001
When I try to re-install the hardspl or the installer recomended in this post it raised an ERROR [300]: INVALID UPDATE TOOL.
For information I haven't got a SD card and I've done all this by USB cable.
Can enyone tell my how to continue?
Thank you very much,
The Aslan
It seems that nobody can help me?
So as I saw that nobody answered me I bought a microSD card 2Go.
I tried to create a Gold card.
I formated it in FAT32 with a ppc programm installed on an htc TyTn named : storage tools v 2.5.
Did the steps 1-8 sucessfully:
View of Steps 7 & 8:
C:\itsutilsbin>psdread -l
C: - VMware Virtual S
Drive geometry: 0x414 cyls, 255 t/cyl 63 s/t 512 b/s - 8.00Gbyte
disknr=0 fixed disk
D: - TOSHIBA DVD-ROM SD-M1401
Copying C:\itsutilsbin\itsutils.dll to WCE:\windows\itsutils.dll
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
C:\itsutilsbin>perl typhoonnbfdecode.pl -p cardid=00a90045d536008047323055534453
30 -p keys=tornado -p seclevel=0 -d goldcard.img
blversion 1.0.0.0
docuniqueid
entrycount 0
magic HTC$TYPH-666
cardcrc=834ebbec
C:\itsutilsbin>psdwrite -1 goldcard.img 0 0x120
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
CopyFileToSDCard(goldcard.img:00000000, 1, 0x0, 00000120)
I insterted it in my phone... Nothing appens it don't recongnize the mSD.
I tried with RevSkills 2.04.4 and I've the same problem: all is done fine but my Herlad p4350 don't view the mSD when I go into the 3 color screen.
I need help please it is important.
The Aslan said:
It seems that nobody can help me?
So as I saw that nobody answered me I bought a microSD card 2Go.
I tried to create a Gold card.
I formated it in FAT32 with a ppc programm installed on an htc TyTn named : storage tools v 2.5.
Did the steps 1-8 sucessfully:
View of Steps 7 & 8:
C:\itsutilsbin>psdread -l
C: - VMware Virtual S
Drive geometry: 0x414 cyls, 255 t/cyl 63 s/t 512 b/s - 8.00Gbyte
disknr=0 fixed disk
D: - TOSHIBA DVD-ROM SD-M1401
Copying C:\itsutilsbin\itsutils.dll to WCE:\windows\itsutils.dll
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
C:\itsutilsbin>perl typhoonnbfdecode.pl -p cardid=00a90045d536008047323055534453
30 -p keys=tornado -p seclevel=0 -d goldcard.img
blversion 1.0.0.0
docuniqueid
entrycount 0
magic HTC$TYPH-666
cardcrc=834ebbec
C:\itsutilsbin>psdwrite -1 goldcard.img 0 0x120
remote disk 1 has 3842048 sectors of 512 bytes - 1.83Gbyte
SerialNr: 00 a9 00 45 d5 36 00 80 47 32 30 55 53 44 53 30
CopyFileToSDCard(goldcard.img:00000000, 1, 0x0, 00000120)
I insterted it in my phone... Nothing appens it don't recongnize the mSD.
I tried with RevSkills 2.04.4 and I've the same problem: all is done fine but my Herlad p4350 don't view the mSD when I go into the 3 color screen.
I need help please it is important.
Click to expand...
Click to collapse
right it's not recognized, i tried that.... on my Dopod C800/Wing/Herald
is this what you did?
1. Plug the MicroSD card to any working windows mobile phone?
2. Sync the working WinMo to PC.
3. do the perl thing psdread, perl typhoonn, psdwrite, and done right?
4. Copy any RRU/MOD/.nbh ROM to the MicroSD and rename it to heraimg.nbh
5. This time what's inside the MicroSD is the heraimg.nbh only
you tried to boot it, ooohhhhh.. it's not working.. just the 3 color screen.
and this the alternative way to solve.
if you downloaded the heradiag.nbh
1. Remove the MicroSD and plug it to card reader, or to your other WinMO.
2. Copy the heradiag.nbh
3. now there are 2 files your heradiag.nbh and your heraimg.nbh
4. plug again your MicroSD to your brick herald/wing/C800.
5. do the bootloader thing
6. there you go, you will be in diagnose mode.
7. select the flash.
8. the rest is yours to understand.
and your done.
--------------
If you successfully unbrick the phone.
download the HardSPL from Tribulattifather.
http://rghost.net/download/1209299/...609840c3c0331d88971/HardSPL (Wing-Herald).zip
extract all files, and read the PDF file, do what exactly it says.
Thank you SmaRkieS for your answer.
I couldn't post a reply while I had no time this two last weeks.
What you said me didn't work. I bought a MicroSd card reader and created a goldcard with a french topic. Worked well but I've an error when he cheks the SD contents, blue bar, red message : Invalid certificate. I tried with revskills and other heraimg.nbh but it's always the same error.
Did you know already this problem? how can I go on?
Best Regards
The Aslan
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
So, after weeks and weeks searching, reading topcis and trying solutions I've finnaly succeed.
If anyone is interested, here are my steps:
First I read a topic were I found a SPL.nbh in a dutch rom, renamed it in HERAIMG.nbh and with my goldcard flashed it. Then I looked for an original french Herald rom: flashed it. I installed Hardspl (before put the three cabs up on the phone). Finally installed the rom of Tribulattifather.
My herald works fine yet.
Thank you for your replies,
Best regards,
The Aslan
Hi The Aslan
i'm having the same problem & same IPL & SPL as yours ,but i'm still stuck in the bootloader for a week & i can't flash any ROM , so can you plz give me IN DETAILS all what you did starting from the GOLD CARD till the ROM you installed .
I need help please it is important.
Best regards,
elnakah
Hi elnakah,
Here are my steps to unbrick the herald:
First download the dutch rom, take the SPL.nbh out and rename it HERAIMG.nbh. Put it on your goldcard with the heradiag. With the heradiag flash it. ( You will have the IPL at 1.08 and the SPL at 4.1)
Then, do a Hardreset; you can see the message who says : format sucessful or something esle and an image with the logo of htc will appear and desappear very quickly and you will return to the bootloader.(With the heradiag you have the possiblity to format your device in FAT you can do it but it's optional and just to be sure)
Flash an ORGINAL default rom
If it works, install correctly the hardspl.
Flash any rom you want
I hope I've helped you,
Regards,
The Aslan
after upgrading my spl 1 in htc hermes (i mate jasjam) to spl 2.1 then install wm 6.1 the wifi is not working.
I can't turn on wifi. When I touch in switch it do not on. I already made several hard resets and this does not result.
some one solve that problem in this Thread:
http://forum.xda-developers.com/show...490681&page=34
****ok finaly it's all ok
i have read an eeprom good
so here the solution
load in your trinity olipro1.30
open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)
at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00
save file
now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000
reset
and enjoy****
but the problem that this thread for htc trinity and i have imate jasjam
i have maked the same step and when want to convert the "nb" file in mtty i write this command:
lnb trin100.nb 500a0000 400
mtty told me:
unkonwn cmd command!!
some one asked the same qusition and they told him:"you have had olipro1.30 in your mobile" and i can not find olipro1.30 for jasjam
pleas i need your help!!!!!