Related
Hi all,
for to get ROM from Magican you have:
-make a backup of your device with xbackup (it is a program in your MDA Compact).
-insert a sd card on your device,
-press and hold power and camera button and do a soft reset
-connect your device to your PC with the USB cable and disable USB on Active sync
-run MTTY.exe and select USB
-press enter, type d2s and press enter again (these command should backup ROM in to SD)
-when finish (you'll see it by device display) get the SD and insert it to a cards reader
-for to copy the file in SD Card to your PC you have to use NTRW and run it with this command: c:/ntrw read MDAc.nb1 x: (x is your card reader so replace with the letter of your card reader) and get NTRW in C:
-after that you should have in C: a file called MDAc.nb1
Now would be nice to upload it to FTP site or some where else.
For more information you can see here:
<http://www.xda-italia.com/modules.php?name=News&new_topic=5>
<http://forum.xda-developers.com/viewtopic.php?t=2110&highlight=mtty>
<http://forum.xda-developers.com/viewtopic.php?t=4557&highlight=bootloader+commands>
<http://www.xs4all.nl/~itsme/projects/xda/bl-ii-usage.html>
Ciao,
Gibbo.
"d2s 0" for dump bootloader (required for change language)
Xetra said:
"d2s 0" for dump bootloader (required for change language)
Click to expand...
Click to collapse
Thanks for the information!
how do you do to backup also the extended rom and the radio rom ?
thanks
Hi, when you backup the rom, the extended rom must be also included.
what do you mean by "must" : it's done when you enter "d2s" under Multi-Port/USB TTY ?
And for the radio rom ?
Thanks
jpa said:
what do you mean by "must" : it's done when you enter "d2s" under Multi-Port/USB TTY ?
And for the radio rom ?
Thanks
Click to expand...
Click to collapse
"d2s 0" to dump boot loader (required for language change)
Can you use the XDArit or SDCardTool GUI utilities to copy the ROM from the SD card to the computer?
aristobrat said:
Can you use the XDArit or SDCardTool GUI utilities to copy the ROM from the SD card to the computer?
Click to expand...
Click to collapse
I don't think so!
Anyway seems that nobody is able to dump the ROM of their English MDA Compact!!!
I have an English ROM from Dutch MDA Compact (Locked to T-Mobile) available for those who want it. Please PM me. (IMG file for use with Jeff's XDA Tools)
Wiz said:
I have an English ROM from Dutch MDA Compact (Locked to T-Mobile) available for those who want it. Please PM me. (IMG file for use with Jeff's XDA Tools)
Click to expand...
Click to collapse
Thanks Wiz.
Could you post your image to xda FTP site?
ftp://xda:[email protected]
Cheers.
@Wiz : your rom image was not good. You sent me a file with a size of 3 Mo on your last email.
Are you sure that Jeff Tools are ok for a magician ?
Thanks to try again maybe with mtty ?
MTTY gives the same result. Also 3Mb ... appears that the tools are not compatible with the Magician
with my german rom, when i use jeff tools the size of my image is 32 243 712 octets.
SD size
Wiz said:
MTTY gives the same result. Also 3Mb ... appears that the tools are not compatible with the Magician
Click to expand...
Click to collapse
The size of SD image should be the same size of the SD Card (if you use NTRW).
Wich command on bootloader are'u using for dumped the ROM to SD?
Any body knows the rights strings?
Thanks.
I am now uploading the English ROM dump from my Dutch T-Mobile MDA Compact to ftp://xda:[email protected]/Magician. The filesize is (zipped) 172Mb, so bear with me please, should be finished in 1 hour or so ...
thanks. I opened it with winhex. I am not a expert but something seems still strange. There is 256 Mo of data (and no blank) ?
Has the extended been posted yet? I really want that cool screen rotation app that sits in the system tray.
take note that the magician os rom is 36Mbyte.
see MagicianRomLayout in the wiki for more info.
the old xda-1 'jeff tools' will give you a very truncated rom.
outz said:
Has the extended been posted yet? I really want that cool screen rotation app that sits in the system tray.
Click to expand...
Click to collapse
hi,
it's not a cab since it's already instaled even if you don't let autoconfig run after hard-reset.
and it doesn't appear anywhere in the compact folders(windows, programme, etc...)!
guys thi is my 02 xda mini
rom version:1.11.00 WWE
rom date: 03/14/05
radio version: 1.12.10
protocol version : 1337.42
ExtROM:1.11.922 WWE
guys do i need to upgrade my system? or this is a newer version?
im sorry to all cause im am newbie on my device...
kindly explain what available version on 02 xda mini,and suitable for this device
thanks to all guys..
Hey it's not the newest in the world, but might be in your country. The 1.13WWE from T-Mobile is newer, but than you'll loose all O2 extra's. & upgrading what's it worth to you? It always is the case of 'if it ain't broken, don't fix it'.
For howto's & rom links visit the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
Cheers, M
That's strange. The O2 update for Asia I downloaded and installed carries the 1.11 radio version. Did you buy that unit new?
Anyway, except for the radio version, that's the most current ROM available for us.
hi oltp thanks for the info...i want to upgarde coz i want experience upgrading xda mini but its to risky he he he may ive change my mind...
hi oliver..ill bought it at 2nd hand...what version dou you have?is my rom version is newer?
There's always a risk in upgrading, see all posts with dead or help! in the title.
But it can be done & in your case make a good back-up of the ext-rom cab-files before going to think about upgrading to 1.13WWE from T-Mobile.
Regards, M
siapelbo said:
hi oliver..ill bought it at 2nd hand...what version dou you have?is my rom version is newer?
Click to expand...
Click to collapse
Ahh, that explains it. Your radio is more current, I think. If you're not having any trouble with that setup, I sugget you leave it alone.
Anyway, does your phone already have the Big Storage hack applied? What's the size of your Storage (Settings -> Memory -> Storage)?
I see...thanks oliver for the info
i have 57.41mb total storage
im gonna upgrade it to big storage/hows the procedure?
thanks
He meant what size is your internal storage folder? When you view the memory there's a tab to see the size of your SD/MMC-card. That tab can display the internal storage too.
M
i see....now i know oltp thanks
its 7.60mb
guys please teach me to do the upgrade of my storage..
if i get to upgarde my storage to big storage my xda mini will have extra speed?
thanks
No extra speed in the sence of Mhz. But you can store more programs there instead of in RAM & that speeds up your magician.
As always there are riscs in this :!:
Instructions:
- get ntrw.exe from the ftp
- Download romupdate from: http://forum.xda-developers.com/download.php?id=7510
- Download Hexedfull from the ftp
- get a SD-card > 64MB
- make backup of everything you want to keep from your magician & SD-card. everything will be wiped!!
- fully charge your magician
- uncheck usb connection in Act.sync on your PC
- put your magician in Bootloader (camera & power & soft-reset at the same time for a few seconds) wait till screen fades & reads 'serial v1.0x'. Screen is very dark since backlight is of.
- connect usb, now the screen reads 'usb v1.0x'
- start romupgrade on your pc
- pick the magician connection in the listbox, wces something I belief
- now a screen pops up
- type d2s in this screen
- follow progress on pc & magician
- wait till checksum finishes
- get SD from the magician & put it into a cardreader. DON'T FORMAT!!!
- put ntrw in C:\
- start a command window
- type on commandline: ntrw read myrom.nb1 [sd driveletter]:
- follow progress
- error at the end is normal
- make a copy of myrom.nb1
- open myrom.nb1 with the hexeditor
- Replace pattern for bigstorage in myrom.nb1:
locate twice the 02 00 00 80 00 20 and change 80 00 to b8 01 in both occurences
(use binary search for this!!)
- save it to mybs.nb1
- type on commandline: ntrw write mybs.nb1 [sd driveletter]:
error at the end is normal
- put the SD in your magician
- now it should read 'press power to flash'
- press the power button
- watch it reaches 100%
- checksum will always fail
- reset & hopefully enjoy the BIG Storage rom
Cheers, M
wow :wink: thanks otpl for the full step by step procedure...
im having 2ng thoughts to do it coz its so risky
anyway thanks for the help
Store the steps for later use & if you ever find a shipped-rom (rom upgrade in exe format from a telco) that you like, then follow the wiki link & use that method to obtain BIG Storage. With a shipped-rom a BS patch is exactly the same as a normal upgrade.
Regards, M
Hi,
I have installed the latest MorphGear 2.3.0.2.
When I start MorphGear, I get the following error:
Destiny: Exception in e:\dev\spicypixel\destiny\src\gapi\gapidisplay.cpp at line 355
Has anyone had the same problem and found a way to fix that?
Can anyone help so I can get it to work?
I have already tried installing to Memory, Storage Card, Hard reset starting from the beginning again and only installed Morphgear but I still get the same error. Thanks a lot
My device is:
Universal (T-Mobile UK - MDA Pro)
OS: Windows Mobile 5
Runningthe latest I-mate ROM
Fresh installation
Windows Mobile 5 no longer supports GAPI. Instead programmers need to use ExtEscape.
hello
i have a HP6815 with WM5 and i would like to know if it's possible to put WM6 .
thanks a lot
JB
me too
waiting for wm6
Hi,i`m new here,i would like to now if there is any rom wm6 for my rw6815,thanks
I'va a HP 6815 with WM5 and I want know if it's possible to work with WM6, thanks.
hi, there are no wm6 rom!
and 6815 isnt 6915\6515 , understand?
6815 like xda atom
no rom for my pocket pc?
This is pre-release WM6 for HP rw68xx based on ATOM_EXEC_WM607AWWE_20071117A1WWE_8MBPP from jiggs:
ATTENTION! You do this to your own risk!
For HP iPAQ rw6815:
ATTENTION! For best results recommended to use 128 Mb - 1 Gb miniSD cards by Transcend, Kingmax, Kingston 512 Mb and smaller
diskimg.rar (40,6 Mb) - main OS, decompress this archive in SD Card root directory
Cabs.rar (843 Kb) - default packages, installing automatic after flashing. Put needing packages into '\Cabs' directory on SD Card
pda-hack.net_rw68xx_ExtROM_emul.cab (3,97 Mb) - some applications needs ExtROM, this package can emulate it. Install after flash or put it into '\Cabs' directory before flashing for autoinstall
SdkCerts.cab (4,59 Kb) - certificates for patches
pda-hack.net_hp_rw6815_camera_patch_rus.rar (594 Kb, russian interface) or pda-hack.net_hp_rw6815_camera_patch_wwe.rar (594 Kb, english interface) - patch for camera (start old HP application), install AFTER certificates
To flash press & hold soft-keys, then push reset, after HP logo is appear, release soft-keys and don't touch anything. After flashing device automatic reboot in hard reset.
For HP iPAQ rw6828 you must skip steps 5, 6 (tested by Roma), for HP iPAQ rw6818 not tested.
Updated 12/30/2007:
- WiFi blue LED blinking when WiFi turned on
Don't use this topic for discussion, english discussion in this topic.
http://pda-hack.net/forum/index.php?showtopic=50
http://forum.xda-developers.com/archive/index.php/t-333165-p-2.html
ATTENTION! You do this to your own risk!...
What about rw6815
once you updated to Windows Mobile 6 it gonna work well or some functions need to be patched
Soft keys
Can you please tell me where are the "soft-keys", and can I use 2 Gb card?
Has anyone tried this and if so how does it seem to work and what problems did you run into
shkumbin said:
Can you please tell me where are the "soft-keys", and can I use 2 Gb card?
Click to expand...
Click to collapse
If you're asking a question like "where are the 'soft-keys'?", I'd have to say I'm sot sure you're up to flashing (and possibly bricking) your own phone... but anyway!
The 'soft-keys' are the two [-] keys on the phone... called "soft" because their action changes depending on what is on the screen at the time (i.e. what is written above them).
Samon said:
If you're asking a question like "where are the 'soft-keys'?", I'd have to say I'm sot sure you're up to flashing (and possibly bricking) your own phone... but anyway!
The 'soft-keys' are the two [-] keys on the phone... called "soft" because their action changes depending on what is on the screen at the time (i.e. what is written above them).
Click to expand...
Click to collapse
Thanks Samon,
I managed to flash my phone, and it's working perfect. I am very happy with it.
Hi shkumbin,
did you flash an HW6815 or HW6915 with WM6 successfully ?
Regards... Lionel
spgi said:
This is pre-release WM6 for HP rw68xx based on ATOM_EXEC_WM607AWWE_20071117A1WWE_8MBPP from jiggs:
ATTENTION! You do this to your own risk!
For HP iPAQ rw6815:
ATTENTION! For best results recommended to use 128 Mb - 1 Gb miniSD cards by Transcend, Kingmax, Kingston 512 Mb and smaller
diskimg.rar (40,6 Mb) - main OS, decompress this archive in SD Card root directory
Cabs.rar (843 Kb) - default packages, installing automatic after flashing. Put needing packages into '\Cabs' directory on SD Card
pda-hack.net_rw68xx_ExtROM_emul.cab (3,97 Mb) - some applications needs ExtROM, this package can emulate it. Install after flash or put it into '\Cabs' directory before flashing for autoinstall
SdkCerts.cab (4,59 Kb) - certificates for patches
pda-hack.net_hp_rw6815_camera_patch_rus.rar (594 Kb, russian interface) or pda-hack.net_hp_rw6815_camera_patch_wwe.rar (594 Kb, english interface) - patch for camera (start old HP application), install AFTER certificates
To flash press & hold soft-keys, then push reset, after HP logo is appear, release soft-keys and don't touch anything. After flashing device automatic reboot in hard reset.
For HP iPAQ rw6828 you must skip steps 5, 6 (tested by Roma), for HP iPAQ rw6818 not tested.
Updated 12/30/2007:
- WiFi blue LED blinking when WiFi turned on
Don't use this topic for discussion, english discussion in this topic.
http://pda-hack.net/forum/index.php?showtopic=50
http://forum.xda-developers.com/archive/index.php/t-333165-p-2.html
ATTENTION! You do this to your own risk!...
Click to expand...
Click to collapse
where is the link to download wm6
please
shkumbin said:
Thanks Samon,
I managed to flash my phone, and it's working perfect. I am very happy with it.
Click to expand...
Click to collapse
Which steps you took exactly. Can you writedown a step-by-step detailed manual?
Thanks!
dj_713 said:
where is the link to download wm6
please
Click to expand...
Click to collapse
PDAVIET ROM for HP iPAQ rw68xx by NHOCBANME™
http://forum.xda-developers.com/showthread.php?t=358704
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
xda-graphite said:
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
Click to expand...
Click to collapse
Sell your Toshiba, and buy a HTC.
xda-graphite said:
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
Click to expand...
Click to collapse
Hi,
I don't know what you can do replacing such files, ( I think you must first make a dump of the rom, reconstruct it with the new files and then repack an flash again ) anyway you can try to extract gwes.exe and gwes.exe.0407.mui from the localized emulator on Microsoft web site... search with google for that if you don't have the link, I don't remember it now...
Really hope this help
Do you try to do a hardreset?
Surely you could use pput from ITSUTILS to drop the replacement files in, and then do a soft reset?
As for the files themselves, you'll just have to hope someone sends them to you
a majority of these errors was not caused by gwes.exe itself, i think. if you installed any software recently, uninstall them and try again
Hey guys, thank You for Your help. Never expected this resonance after the first reply
@[email protected]
you can try to extract gwes.exe and gwes.exe.0407.mui from the localized emulator on Microsoft web site...
Click to expand...
Click to collapse
just extracted it from WM5, but complete crash after replace
@THEVK
Do you try to do a hardreset?
Click to expand...
Click to collapse
a few times with no success
@Aquilo
Surely you could use pput from ITSUTILS to drop the replacement files in, and then do a soft reset?
Click to expand...
Click to collapse
just replaced the files with pput, but after soft reset complete crash of the phone.
@dandycheung
a majority of these errors was not caused by gwes.exe itself, i think. if you installed any software recently, uninstall them and try again
Click to expand...
Click to collapse
after a hardreset just installed tomtom -> crash
TomTom 5.21 / 5.20 both worked on my old xda graphite with WM5 but with another AKU version, i think 2.xx (don'T know bc. it's in the cellphone-heaven)
Don't know further, i have no ideas, maybe you guys
sell this and DO NOT buy htc!
gwes.exe is device dependant, so your phone wil never work with another device's version.
gwes.exe is device dependant, so your phone wil never work with another device's version.
Click to expand...
Click to collapse
no. it's device independent, but can have different components.
Also you can't replace it directly.
just extracted it from WM5, but complete crash after replace
Click to expand...
Click to collapse
it contains relocations. Do you fix it?
Also it must be signed.
Maybe this is interesting for someone:
left software button + power on
RUU update!
Waiting USB Connection ......
connecting usb cable
Updating
Receive call + power on
Factory update!
udc_enable
usb connect
Error occured, usbdev ep0 stalled!
and on Windows -> Driver installer -> TFW USB Download DR/V -> no driver found
(1 + power on) or (vol + power on)
PB Update!
Connecting...
INFO: Trying to initialize USB RNDIS...
HostMINIlnit:: !!
Rndis:: initialization: with addr=0
Rndis:: initialization!
Rndis:: Get MAC address yyyy,yyyy,yyyy
Rndis:: initialization: Fail!
ERROR: Failed to initialize Bulverde Rnd is USB Ethernet controller.
ERROR: Failed to detect and initialize Ethernet controller.
usb connection + 1 + battery connect
PB Update!
Connecting...
INFO: Trying to initialize USB RNDIS...
HostMINIlnit:: !!
Rndis:: initialization: with addr=0
Rndis:: initialization!
Rndis:: PDDInit Success!
Rndis:: Get MAC address XXXX,XXXX,XXXX
xxxx -> maybe device specific numbers
.
.
and on Windows -> Driver installer -> Microsoft RNDIS KITL for Intel PXA27x no driver found
.
.
Rndis:: initialization: Fail!
ERROR: Failed to initialize Bulverde Rnd is USB Ethernet controller.
ERROR: Failed to detect and initialize Ethernet controller.
4 + power on
KITL Enable...
Cellphone remains in "Toshiba Startscreen"
* + power on
SDCard update!
.
.
TFW Windows Mobile PDA SW DOwnload!
Initilization T-FLASH Card... SD Card CMD: Card Response timed out: 0x2142Initlization card fail!
Initilization T-FLASH Card... SD Card CMD: Card Response timed out: 0x2142Initlization card fail!
with MiniSD Card in slot:
* + power on
SDCard update!
Sectors per cluster: 32
First FAT Sector: 98
FatSectors: 31
First Dir sector: 160
First Data Sect : 192
Root DIR Entry Count: 512
...Dirctoy listing...
Search root dir fail!
fat search sector: Fail (fat_locate)
Find file fail!
Open file Error
Upgrade Fail!
0 + power on
------------------------
Xloader Version: MDOC4(mcp25) V1.00
Eboot Version: Eboot-1.02-00
(1) Download with USB_RNDIS
(2) Boot from IPL KITL enable
(3) Boot from IPL KITL disable (default)
(4) Test Key Value
(5) Test Memory
(6) Run ULDR. default FALSE
(7) Clean Reboot
(8) Abnormal Reboot
(9) Goto Sleep
----------from oallog------------
-----------------------------
Enter your selection:
This is your bootloader menu. All devices have some version of it.
Though all manufacturers put an option to upgrade in to their devices (just in case and for internal test purposes) few bother actually releasing updates.
There is no way to just replace gwes.exe and have the system working. What you need is a whole new ROM, so unless you can find someone cooking one I guess you are out of luck.
Thanks levenum,
i agree, there is no way just replacing it.
Just spoke to Toshiba support.
I asked for a hardware reset -> he searched and searched -> and told me "on this phone no way to do a hardware reset"
I ask myself WHO is working on toshiba support?
Why couldn't he say: press "0" + power on and then press 7
Does somebody know how to backup the rom e.g. on sd-card.
Flashing from sd card is possible with * + power on, but i don't know the filename the phone is requiring, and dont have one. Maybe after rom-dump the file will be known.
Toshiba also upgrades the G900 modell only by sending it in. There is no rom-update on the net. Maybe if someone tries (and knows) to backup the G900 rom maybe there is a chance to kook to WM6 for the G500.
Toshiba G500 Call outgoing problem
Toshiba G500 Call outgoing problem.But Idid formeted it "Format user partition" system. After have same problem & all incoming call ok.
any 1 will can give me solution for this problem ?