Database Users

ipaq 614 boot keys

Hi,
just my findings on the ipaq 614 boot keys:
LL=low left
ML=middle left
UL=upper left
LR= low right
T=top
LL Clean Boot
LL+ML HSDPA_CAL wait for modem on
LL+UL Download image
LL+T SD Loader
or LL+LR
ML Modem on
ML+LR boot with usb kitl
UL Download qualcomm image
UL+LR Format
If someone comes up with the latest rom for the 614 series would be great or with a newer rom than 0.52 radio and 0.34 OS.
thanks

hw6915 That is my last drive of that company. More will not buy from them never. They do not have software support. Never anymore HP. No WM6 for my device. Never anymore HP.

I agree, though the 614 is very nice, but old rom is a bit slow!

Hello where can I find the last rom for the Ipaq 614c.
Thanks

yes, would also be interested in the latest FW !!!
does anyone have experience with qpst and uploading a new os/fw using the dnw software or using RNDIS KITL drivers via USB ???????
I have a older fw and trying to upgrade the device but not enough experience.
thx
saxxon

yuga said:
Hello where can I find the last rom for the Ipaq 614c.
Thanks
Click to expand...
Click to collapse
You guy's are just a bunch of crying babies. This machine is just about 1 month on the market, and you're already crying for a 'new' ROM.
It has WM6 build 18125.0.4.2 ; ROM version MP-1.00.01 ; Bootloader MP-1.00.01 ; BT Radio = BlueCore 4.7.3 ; WLAN Radio = 9.7.3.10 ; Phone = MP-0077-140108
I don't know what you kids think but half the world is still waiting to get it.
If you have any issue with it, go check here http://www.modaco.com/category/172/HP-iPaq-iPaq-MoDaCo-com/
Cheers

Thanks a lot, saxxon.
After install a IME application from storage card My IPAQ 614c don't work. I have called the HP support. They todl me: mail the phone and reflashing ROM. The guy from don't no the money and time?
I do clean boot cording to instrution above. and the phone work again.

hi
i just got a 614c and i installd swedish keybord. and wen i reset the phone it starts but the screan just gos black. i dont understand wath hapend.
and i dont understand how to use the boot keys can someone help me please
i had own the phone 30min and den i broke.

turn off your device by having along press on power or remove battery
then press voice comm +SR+power
you will see the device do a clean boot
good luck

Hi,
Does anybody have an English ROM for the 614c? I'm with an italian one and i want to change it. I tried with the kitchen rom but i received an error during the upload. Anyone who can share his original one?

LR+T calc checksum's

????
saxxon said:
Hi,
just my findings on the ipaq 614 boot keys:
LL=low left
ML=middle left
UL=upper left
LR= low right
T=top
LL Clean Boot
LL+ML HSDPA_CAL wait for modem on
LL+UL Download image
LL+T SD Loader
or LL+LR
ML Modem on
ML+LR boot with usb kitl
UL Download qualcomm image
UL+LR Format
If someone comes up with the latest rom for the 614 series would be great or with a newer rom than 0.52 radio and 0.34 OS.
thanks
Click to expand...
Click to collapse
What does it mean?!
LL=low left
ML=middle left
UL=upper left
LR= low right
T=top
?????

iPAQ 614c Keys

"LL+UL Download image"
What are the other things to do to start "download image"?

So I've made it...I will post my original ROM. Its a German HP iPAQ 614c with standard applications...
Greets
chucknican
------------------------------------------------------------------------------
ORIGINAL MESSAGE:
"LL+UL Download image"
Click to expand...
Click to collapse
If I do that, it goes and goes and goes and ...
But nothing happens for 20 minutes!!!!! Another try ran 8-10 hours without an effect...
So what have I to do that it downloads the image?
I've got HP 614c and a 2GB Memmory Card --> SD Loader runs with updates from it....
Greets
chucknican

Italian rom wm6 for hp 614c wanted
Hello i'm looking to find an ita rom for my hp 614c,can anyone help me thanks
enrico

ROM ITA
stanimir komitov said:
hi,
does anybody have an english rom for the 614c? I'm with an italian one and i want to change it. I tried with the kitchen rom but i received an error during the upload. Anyone who can share his original one?
Click to expand...
Click to collapse
could you please give me you ita rom ?!!!thanks vey much if you can!!!enrico

qtek20202 said:
could you please give me you ita rom ?!!!thanks vey much if you can!!!enrico
Click to expand...
Click to collapse
i've theenglish for sd flashing!!

Download image
chucknican said:
So I've made it...I will post my original ROM. Its a German HP iPAQ 614c with standard applications...
Greets
chucknican
------------------------------------------------------------------------------
ORIGINAL MESSAGE:
If I do that, it goes and goes and goes and ...
But nothing happens for 20 minutes!!!!! Another try ran 8-10 hours without an effect...
So what have I to do that it downloads the image?
I've got HP 614c and a 2GB Memmory Card --> SD Loader runs with updates from it....
Greets
chucknican
Click to expand...
Click to collapse
Try "LL+UL + Power Button" I use quite a bit these days!\
Sunday

chucknican said:
So I've made it...I will post my original ROM. Its a German HP iPAQ 614c with standard applications...
Greets
chucknican
------------------------------------------------------------------------------
ORIGINAL MESSAGE:
If I do that, it goes and goes and goes and ...
But nothing happens for 20 minutes!!!!! Another try ran 8-10 hours without an effect...
So what have I to do that it downloads the image?
I've got HP 614c and a 2GB Memmory Card --> SD Loader runs with updates from it....
Greets
chucknican
Click to expand...
Click to collapse
download image is to be used when you are unable to update rom via SDloader from SD card (e.g. card is broken, bootloader is crashed...)
you surely need utility running on PC which will upload ROM image from PC to ipaq in "download image" mode
see post http://forum.xda-developers.com/showthread.php?t=459123
for the solution of updating ROM on ipaq with crashed bootloader.

Flashing the Radio / modem on ipaq 614 - first ideas

Hi,
Hp just released an update for the 614, only for englisch.
I have a german 614
I dont care about the OS part since I use a cooked 6.1.
But the update also contains a modem / radio update to version 0.88.
Currently out there i think there are 0.77 and 0.81 depending on language.
I believe the radio fw is language independent when it comes to functionality. But the hpruu says wrong language.
With the current universal hpruu tools you can only update the OS which is of no use.
I know you can update the radio by booting with the key combination:
lower left key on the side (record button) and the camera button.
Then turn on ... it shows : SD loader for modem
(similar on how you update the OS)
I also know that the radio update files are in the update.
They are called
amss.mbn
amsshd.mbn
maybe also partition.nbf
But I am not sure about this.
It might work with just copying the file to a non HC SD card and using the key combination.
There might be some file renaming involved.
I someone out there to try that and let us know how it worked ?!
Thanks
sax

hi, imho theoreticaly you can update
1) .mbn files with qualcomm loader(SD Loader for modem) iam tryied it but no luck , .mbn files from hp 1.01.04 update have bad format not usefull for flashing from sd card :/
2) .nbf files from eboot loader(SD Loader), no luck bad format too :/
other way you can use QPST tools from Qualcomm or QC BS Firmware Analyzer(avaliable on xda forum)
small how-to connect ipaq614c for using with this tools
1) put ipaq to modem mode (push ML and power on)
2) connect ipaq to pc
3) install MotoQdrivers.zip (dont forget to adjust speed for COM ports)
i have included Qualcomm MSM6280 loader for QPST - NPRG6280.ZIP (ipaq 614 have this chip for radio)
sorry for this chaotic text i hope that is usefull

Saxon,
File partition.nbf is for IpaqFileStore update.
Maybe you should try with the following way:
- extract the whole package from HP side
- remove from the obtained directory the OS file (the larger one)
- put your device into SDloader state (voice recorder + mute + power on)
- connect your device into PC via USB
- launch RUU utility
In my opinion there is a big chance it will work.
Such way (using the SDloader) was working for one polish case where the upgrade of firmware failed due to PC crash. The only chance to flash again was to use SDloader + HP tool.
Good luck.

Z!L0G80 said:
hi, imho theoreticaly you can update
1) .mbn files with qualcomm loader(SD Loader for modem) iam tryied it but no luck , .mbn files from hp 1.01.04 update have bad format not usefull for flashing from sd card :/
2) .nbf files from eboot loader(SD Loader), no luck bad format too :/
other way you can use QPST tools from Qualcomm or QC BS Firmware Analyzer(avaliable on xda forum)
small how-to connect ipaq614c for using with this tools
1) put ipaq to modem mode (push ML and power on)
2) connect ipaq to pc
3) install MotoQdrivers.zip (dont forget to adjust speed for COM ports)
i have included Qualcomm MSM6280 loader for QPST - NPRG6280.ZIP (ipaq 614 have this chip for radio)
sorry for this chaotic text i hope that is usefull
Click to expand...
Click to collapse
I used the qpst already and it worked that way that i could upgrade but phone didnt boot afterwards. so i am very careful with this tool now.
I am just wondering why your sd loader (the OS image) update didnt work. because i had no probs with it so far. also from the hp orig files.
did you try the qpst update ???
if yes did it work if yes can you send a step by step ?
thx a lot

hi , try my patched ROMUpdate.dll mayby it could help , i dont try QPST because i have succesfully update my 614c with hpruu utility --> http://rapidshare.com/files/139300161/ROMUpdate.dll.html

did you also try the cooked wm6.1 os on it already ? does it work with the new fw0.88 ?
thanks !

yes, when i update fw i reflashed my own 6.1 based on yevg001 v1.4 and works ok

Z!L0G80 said:
yes, when i update fw i reflashed my own 6.1 based on yevg001 v1.4 and works ok
Click to expand...
Click to collapse
No success ... either with the romupdate.dll oder with the other tools.
A bit stuck now ... anz other suggestions ?
thanks !

forwarded
29 Jul 2008 release on HP Official Site HP iPAQ 612c WM 6.0en OS 1.01.04 FW 0.88
HOW TO USE:
1. Download the FILE to a directory on your hard drive.
2. Execute the downloaded file and follow the on-screen instructions to unpack the ROM update files to a directory. (NOTE: This directory should not contain any file or folder from any previous ROM upgrade)
3. Establish an ActiveSync connection between the iPAQ device and the host PC using a USB connection.
4. The ROM Update Utility (hpRUU.exe) starts automatically. Follow the on-screen instructions to complete the ROM upgrade.
NOTE: Once the update is complete, the FILE downloaded in Step 1 can be deleted, if desired
Download Link: http://www.mediafire.com/?sharekey=a65dc2a6e56aea29d2db6fb9a8902bda

Thats correct
But thats for english devices.
I have a german one where it doesnt work, and I am looking for a workaround.
Any suggestions ?

Get Hp Sp38905.exe http://h20000.www2.hp.com/bizsuppor...swLang=18&mode=2&taskId=135&swItem=hh-59339-1
Use winrar to unpack it.
You'll find an Eboot.nbf. This Eboot.nbf is language and SKU id independent.
Replace the file header of all .nbf files from hp 1.01.04 update by the header of this Eboot.nbf file.
The header is just the first 3424 bytes of .nbf files.
You do not need to change .mbn files.
Then you can run Hpruu.exe to update. The file names shown during updates are wrong, but results are right.

@kkwy
And what if, like in my case, sp38905 is reporting the same error.
product id: FB136AA#ABB

Just try to find one .nbf file that you can flash.
Then replace header file with the header file of that .nbf file.
The header seems to be useless (solely for checking) so you can replace then at will.

http://rapidshare.com/files/139300161/ROMUpdate.dll.html mayby now working ,try
EDIT> link updated

@ Z!L0G80
Yes, It works.
Thanx

Sucess!!
Now I have os 1.01.04, fw 0.88.
It takes a long time for radio firmware to flash, but, be patient.
Thanx again Z!L0G80

Thanx Z!L0G80's
It works for me to on the Dutch 614.
Strange thing is, that in de system config it stil says Dutch version of the mobile device (but it's UK now).
Very nice again.

ok great .... works ! thanks a lot !
would it also work with the 914 ? anybody tried ?
thx

My PDA already came with 1.01.04, fw 0.88 Rom, however I used the HP rom update utility to see if the rom would update without issues.
The rom update worked fine, however unfortunately something annoying is happening with this rom update. Now every time I try to do a clean boot, the first time the PDA turns on, after marking the screen, it would try to do some HP software update and right after the update I am forced to do a Reset, then I can use the PDA.
Previously I didn't have to do this, when I did a clean boot, the pda worked straight away after marking the screen, and I wouldn't need to reset it.
I think the reason for this maybe because this rom comes with extended rom, is there anyway of taking it back the way it was, or getting rid of the extra applications like the streaming player
This is the Rom I used
Type: BIOS
Version: 1.01.04 (22 Jul 2008)
Operating System(s): Microsoft Windows Mobile 6
File name: sp40097.exe (53 MB)
http://h20000.www2.hp.com/bizsuppor...3048-1&prodTypeId=215348&prodSeriesId=3544358
Am I the only one experiencing this issue, is there another rom that doesn't do this?
Thanks

anyone tried Sd loader modem with success?
what if the Activesycn not work?
I have tried copy the amss** files on SD, then sd loader modem. And wait so long time, 2 hours, and stay with the screen "write amsshd.mbn". I dont think it is working.
Anyone tried ?

914C and wrong flash...

Hi all,
I flased that device, unfortunatly with wrong flash.dio... now my ipaq starting but only with HP logo, then logo disappear and all screen is white. I can enter into SDLoader mode (using volup+ok+reset), SDLoader is written on screen for abount 15seconds then screen is white.. How can I repear it ??
THX for help !
Regards, David.

d.kaluza said:
Hi all,
I flased that device, unfortunatly with wrong flash.dio... now my ipaq starting but only with HP logo, then logo disappear and all screen is white. I can enter into SDLoader mode (using volup+ok+reset), SDLoader is written on screen for abount 15seconds then screen is white.. How can I repear it ??
THX for help !
Regards, David.
Click to expand...
Click to collapse
Hi David,
i have also an iPAQ 914c, and i have already upgraded ROM to change language, so that, my iPAQ has the same problem as yours. if you have fixed it please tell me what i have to do. (because im a nobiew)
thanks in advance
Rgds,

congtiger said:
Hi David,
i have also an iPAQ 914c, and i have already upgraded ROM to change language, so that, my iPAQ has the same problem as yours. if you have fixed it please tell me what i have to do. (because im a nobiew)
thanks in advance
Rgds,
Click to expand...
Click to collapse
Hi,
How about getting the CORRECT flash.dio and restart the complete procedure ?
,
Dirk

@dirlan2001:
hi, so do you have the correct flash.dio for hp ipaq 914c WWE?
i just download the original ROM from hp site
extract the flash.nbf
and cut 3432 bytes (the new file starts at E9)
but I can't use it to flash my hp 914c.
Don't know why.

dirlan2001 said:
Hi,
How about getting the CORRECT flash.dio and restart the complete procedure ?
,
Dirk
Click to expand...
Click to collapse
Hi dirlan,
i have made file *.dio as everybody in this forum did (downloading flash.nbf from hp site, then cuted the first 3432 of it away, and saved name as flash.dio. finally flashed but the result is as i told above). if you can make file .dio for me? i really would appreciate your kindly assistances

try this method: http://forum.xda-developers.com/showthread.php?t=459123

vragon said:
@dirlan2001:
hi, so do you have the correct flash.dio for hp ipaq 914c WWE?
i just download the original ROM from hp site
extract the flash.nbf
and cut 3432 bytes (the new file starts at E9)
but I can't use it to flash my hp 914c.
Don't know why.
Click to expand...
Click to collapse
Wrong. The E9 is the 3432th byte... the file should start at FD
Dirk

dirlan2001 said:
Wrong. The E9 is the 3432th byte... the file should start at FD
Dirk
Click to expand...
Click to collapse
oh man,
how do you know about it?
i just thought that 91x and 61x have the same architecture.
can you show me why?
thanks man

i just checked it again
actually the 3432th byte is EC
=>if you cut 3431 bytes from beginning, the new file must start from EC
=>if you cut 3432 bytes from beginning, the new file must start from E9
=>if you cut 3433 bytes from beginning, the new file must start from FD
warning:
this is the nbf file of WWE ROM of ipaq 914c from the hp site.
i'm confused,
don't know which 's right or wrong,
maybe i will try to patch the dll up update it but don't know where to start.

vragon said:
i just checked it again
actually the 3432th byte is EC
=>if you cut 3431 bytes from beginning, the new file must start from EC
=>if you cut 3432 bytes from beginning, the new file must start from E9
=>if you cut 3433 bytes from beginning, the new file must start from FD
warning:
this is the nbf file of WWE ROM of ipaq 914c from the hp site.
i'm confused,
don't know which 's right or wrong,
maybe i will try to patch the dll up update it but don't know where to start.
Click to expand...
Click to collapse
If take a look at the screenshots below, u'd see in the first what bit i looked up... and in the second u'll see what bit it exactly is if u need to cut 3432 first bytes u need to include that 3432th bit also....It might even be necessary to cut some bytes more letting the new file start at 00, cos if u look in the rightpane, u'll see that these 00 are placeholders for MSFLASH50.....
Cheers,
Dirk

@dirlan2001:
can you upload the bigger images, I can look at them clearly.
thanks man

@dirlan2001:
still waiting for your pics

FIXED! Bricked iPaq 910 it's now alive!!!
Hi all,
I will post this solution on all forums I visited. I could be useful for some other desperate person who's ipaq 910 is bricked o that wants to change the language of the device.
I consider myself a noob on this, I don't know how to support any other iPaqs, I don't know how if this will work on all iPaqs. I just fixed mine, I'm happy about it, and I feel I have to share this experience. Sorry if you have questions that I can't answer.
This process also works to change the language from anything else to English. I'm not sure if it will work 100% due to hardware diffferences, but it worked to change it from Spanish firmware (original one) to English WWE
First, I followed the procedure specified by Paloma on the link:
http://forum.xda-developers.com/showthread.php?t=459123
Now, I will re-write the procedure created by Paloma, to a more clear version:
1- What's needed:
- iPaq 910
- Necessary software
- In case you want a different firmware, go to the HP site and download it. I just found the English one, I don't know is that available in other languages.I dowloaded the English WWE version.
- I used WIndows Vista SP1. It should work on Windows XP.
2- Decide which file you want to use:
- Download the necessary software from these links:
http://rapidshare.com/files/201661070/Fixed_bricked_iPaq_910_-_Change_device_language.zip
or
http://www.megaupload.com/?d=V4LVJ5SP
- If you want to use my file, go to Part 4, if you want to edit your own in your desired language, continue reading to edit the file.
3- Editing the downloaded file from HP site.
- Download the file from the HP site. The link I used was:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?
lang=en&cc=us&prodTypeId=215348&prodSeriesId=3551665&prodNameId=3544441&swEnvOID=4036&swLang=13&mode=2&taskId=135&swItem=hh-63897-1
- Execute the install. Notice that after installing, it will run the update utility.
Cancel it
- Go to the folder that the installer left the files, in my computer it was C:\iPAQ\SP40181, then you will notice that the file FLASH.NBF is there
- From the necessary software download, look for XVI32 and execute it, then open the file FLASH.NBF
- Click on the menu "XVIscript" then "Editor"
- In Editor, type: DEL 3432 then click on the "Execute" button
- It will ask you to save the script, it's not necessary
- Then Save the file as Flash.DIO.
4- Transfering the file FLASH.DIO to the iPaq
- Now that you have your Flash.DIO, either using my file, or the one you edited, you need to transfer it.
- From the necessary software package, go to DNW, open DNW.exe, [Configuration] => [Option], change [Download Address] from 0xc000000 to 0x3000000. You can keep the application open.
- Rename FLASH.DIO to FLASH.nb0
- Bring your Device to "Download image" mode. To do this, press the OK + VOLUME DOWN + Reset
NOTE: Please notice OK buton is the one below the track wheel, on the right side, not the one in the QWERTY keyboard.
- Plug your device to PC. I used Windows Vista drivers and I did not need to use other drivers. In case the drivers are needed for you, then manually select driver to install (files are in SEC folder, on DNW)
- Back to DNW application, click on menu on [USB Port] => [UBOOT] => [UBOOT] and select Flash.nb0. After this, you should start seeing a progress bar, indicating that the file is being transfered.
After the transfer is complete, the screen will display # signs for the progress while the firmware is installed. It takes a while. After it's finished, the iPaq will reboot and do a Clean Boot by itself. It takes a while again. After it's finished, it will start to boot and you will see the green Windows Mobile 6.1 boot screen.
I hope I made it easier for anyone out there. Give the credit to Paloma for providing this tool. At the end I just followed the instructions from the post, bricked my iPaq by using the wrong file, but now it's fixed and I changed the language

Great set of instructions - however, if you try to apply the updated ROM from HP, the file exits with the error stating your phone is FRA, and the update is WWE...?

hi, please help. sorry for my english. i was flashing my ipaq 610c, original español. but, the new rom, was in english. now only screen logo hp, and "clean boot", but is ony this. nothing more. is screen ice. please help.!!!!!

[TUT] HP 91x ROM update (fix bricked ipaq and change from any language to english)

Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal

Good job, thanks!
Will try it out later!

is it still compatible even though my device SKU IDs is not compatible with the update?
Last time i tried i almost bricked my device.

In theory, yes
Actually, like I wrote above.
My ipaq 914c is Italian version.
It means that the SKU IDs of the phone is not not compatible with the update. ( I mean the official update!)
But we all know that there is no difference in the hardware between the ipaq 91x.
So any language ROM versions can be used on the another ipaq 91x phone.
=> WWE ROM can be used on any Ipaq 91x phone.
My Ipaq now is in English. But the SKU IDs still show that it's in Italian.
By the way, I forget to thank: Z!L0G80.

i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx

AbsolutBenz said:
i just tried to update my 912c using HP update utility that i downloaded from mediafire.
but it failed it gave me Code 402 : Cannot Communicate with device. and the device stuck at boot screen with RUU... on top of the screen.
- i already Hardreset the device
- i'm using Benjaminries Motherload ROM
- i'm using Windows XP
please tell is there somethings wrong?
i really want to try the update. should i try using SDbootloader? can you helping find some solution?
many thx
Click to expand...
Click to collapse
Hi,
As it was given like that, I think you should check the usb cable. Sometimes the cable is not working well. I use the original cable, because the last time I use another there was an error when it was flashing. (I'm not sure if the active syn is necessary. In my case, I have the active syn on my laptop. XP enviroment.)
If you want to try the SDBootloader you can find in this forums some instructions about cutting some bytes to obtain the flashdio.nb0
But I really don't recommend that way. Because the last time when I find the way to change the language by flashing the english Rom following those instruction. My phone was bricked. So I tried to find another way.
And this is it.
I think this method is the safest way for newbie. As I wrote above. The first time I bricked my phone. But I did the same procedure again. And it worked.
Just check the procedure again.
Good luck,

For the SDloader update (Which works very very well on my German 914c):
download the file below (I already cut the first 3432 bytes from it), put it on a newly formatted SD-card (not SDHC!) and hold down volumeup+OK button (the one on the right side) while pushing the reset button, hold the mentioned sidebuttons until you see SDloader. Then wait for a few minutes, and the update will finish!
If the updater does not find the file, you have to re-format the SD-card to either FAT or FAT32!
Rename the file to FLASH.DIO when you copy it onto the SD-card!
http://rapidshare.com/files/236053650/FLASH.DIO.html

vragon said:
Hi everyone,
I offer you a safe way to recover your bricked ipaq or just change language into English.
I use the lastest official english ROM download on Hp website.
I saw some members have the ideal to patch the ROMupdate.dll to bypass the check the language of the phone ipaq 61x.
It means that we can update the phone with any languages.
I do exactly the same with Ipaq 91x.
So I upload the file for you.
Just download, extract and run hpRUU.exe
Follow the instruction and after about 20m.
You have the phone
P.S: I used this method to change my phone language from Italian to English successful. And recovery my friend's bricked phone.
But notice that I'm NOT responsibility for any damage with your phone.
Good luck
Download the rom here
http://www.mediafire.com/download.php?jyzy00y2yal
Click to expand...
Click to collapse
Hi Everybody,
@vdragon
1- what a great job, guy!
2- in reality, i have already flashed your ROM successfully for my ipaq 914c, which is a native italian version. Since the incompatibilites of different versions were resolved perfectly.
3-Grazie tanto di nuovo

I'm pretty new with this and I've been trying to update my 910 with original ROM but for some reason it gets stuck and the only way to bring it back is with a SDLoader I downloaded from here but that one is very simple and I'd like one with all the programs.
Is there a way to load yours on it through the SD card?

you can follow the instruction to cut the 3432 bytes and flash your phone with SD card.
I see that many people prefer to use the sdloader method than this one.
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.

vragon said:
...
But the positive point of this method is that it updates all your firmwares include OS, WAN, Radio... to new version. Not only OS.
Click to expand...
Click to collapse
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?

congtiger said:
Hi all,
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Anybody has idea on the contrary?
Click to expand...
Click to collapse
sure

congtiger said:
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
Yes it is true!
Using vragon's patched Updater the following is updated:
OS (=ROM)
Bootloader
Pre-Bootloader
Radio&Modem
This update takes about 20minutes, so be patient, do not remove any cables during update!
The flashing of FLASH.DIO with an SD-card "only" updates the OS (=ROM) and is done within less than 10minutes.
Thanks vrago for patching the Romupdate.dll!

You can also see it in the bootsplash screen. Before the update (even after SDloader updates) it always showed FW 1.04.
Now it is 1.09 - and yeah, it works GREAT and quick!
I can recommend it!! (I do not take responsibility though)
Should be a sticky!!

I've been trying this file, and I get an error at 51% of update. Any ideas?

I think it's about your cable. Be sure that you use the original cable with the anti-noise hub.
If you didn't success the first time. Try it again.
Do as you did the first time.
And just be patient. Don't move anything.
The first time I used this method, at the middle of flashing, I kicked my cable and it just stopped. And I did it again carefully.
So that's it

Actually, I think I figured it out. It seems that Vista treats USB partnerships differently than XP, so after a certain amount of time, it "refreshes" the relationship with the USB device. If you are trying to flash your phone, that stops the flash/update.
I just used my XP system, and it worked fine. After a few registry tweaks for ring volume and battery life, it's working fine.
Are you really sure that the method of using SDloader has NOT updated Modem, Radio ...so on ?
Click to expand...
Click to collapse
I'm positive the SD Loader method isn't as thorough as this method. This method takes 20 minutes or so, and you can see that it's updating the pre-loader, modem/radio, etc. The SD method only updates software.

Problem using HP 614c from original ITA rom
I am a stupd guy
I am a stupd guy
I am a stupd guy
Hy vragon, i have used your method to upgrade my device 614c (and not 914) from an original Italian ROM. All process is ended correctly, all upgrade are finished without errors.
The update utility has made the update of that:
Software - From Version - To Version
Bootloader - 1.00.07 - 1.01.01
Windows Mobile 6.1 Professional - 1.00.07 - 1.01.01
Pre-Bootloader - 1.00.07 - 1.01.01
iPAQ WAN Radio Firmware - 0.81.00 - 1.09.00
But after the upgrade, at the end the display was black(not really black i can see the leds of the entire display are ON but das not appear nothing), and after some minutes abouth 20, i removed the battery and restart the device but nothing has changed. The led over the screen and the sound working.
I have try also to do a hard reset with a flash.dio on an SD card inserted to replace the Rom, but dose not work!
The device after that will work properly, and das not appear to have any problem.
CAN SOMWONE HELP ME !!!

@ilconte81:
just go to hp site.
find a ROM update for 614c.
download it.
using winrar to extract everything in the exe file.
copy the ROMupdate.dll from my file to replace the file in the folder which is extracted from exe file.
run the rom update again.

Tanks for reply vragon,
i have tryed to do what you wrote, but the device will not be right recognized from the OS (will appear USB device not recognized) and the update utlity after a long time in "Plese wait while the device state is verified" give the comunication error Code 402, Cannot comunicate with device.
I use the original cable and try these on different OS like Win XP and Win 7.

[HTC Blue Angel] Windows Mobile 6.1 WWE by Ham3r

Windows Mobile 6.1 WWE by Ham3r
final version!
Windows Mobile 6.1 (build: 21042.1.6.1)
OS: WM6.1 WWE
Free RAM after SR: ~105 MB.
Screen's:
Software:
- ArcSoft MMS 5,
- 1-Calc,
- Jbed,
- FileExplorerEx,
- full Office (without ppt),
- Network Wizard,
- Comm Manager
- SIM Manager from Iolite.
After flash:
After flash, please make HR. After align screen, run ExtROM, please make SR!
Download:
- 4shared
Please don't make mirrors!

hi
good work,nice to see a new developer here,for me i prefere wm 6.5, thnx and good work.

Plain???
Is this so vanilla isnt it?
Yes as homan say, welcome a new developer on Blueangel...
Keep it up!

+ Que PPC said:
Is this so vanilla isnt it?
Yes as homan say, welcome a new developer on Blueangel...
Keep it up!
Click to expand...
Click to collapse
Yes, is it Vanilla, but with useful, standard apps (Java, MMS, Calc). i cooking new WWE ROM, no vanilla, but Vanilla Creamy (more software)

hi, i am new flashig my SPV M2000, Could you tell me how to fix my phone???, I ran your software(hamer 10) and i turned it off(yes, i know!!!), now i only get "serial/usb v2.06", and when i push on/off, record and reset buttoms nothing happen. Could you help me???

sorry, i don't understand.. maybe reflash rom?

flash it in windows xp

Thank you very much!!

at last, ham3r, at last you decided to share your product here.
good idea.
guys, he is good rommaker(he made great roms for wizard, too).

downloaded this rom, today will test it on ba

managed to restore my bricked BA, had to use vista32 bit, the given drivers for BA and this rom by ham3r.
Mm, current I'm using a manila2D on it, works well.
Btw, any ideas on how to make the start menu of the WM6.1 change it colors? I prefer black, matching with the manila2D darkness.

Noted and thanks!

What does this mean ?
Sorry for the display of my ignorance, but I do not know what the following means -
>After flash:
>After flash, please make HR. After align screen, >run ExtROM, please make SR!
What do I have to do, please. I know about aligning sreen, but "make HR" and "run ExtROM, please make SR !" does not mean anything to me.
Thank you for your help

HR = Hard Reset (Push Camera Button + Voice Record and Resetbutton. Change the values KILT = NO, the rest yes. Change the values with die Voicerecord and Camerabutton. When finish Press the Mailbutton
ExtRom= Mostly runs automati when this folder is on your storage card, there are some extra programs for windows.
SR = Softreset (Press the reset Button with the Stylus)

Problem with HTC Touch mobile signals
Hello,
I have HTC Touch here are the details of my model. I am facing problem with mobile signal. Give me some solution for this.
lVersion ROM
Version 3.07.720.03 WWE
ROM Date 10/25/2008
Radio Version 03.34.90
Protocol Version 4.1.13.71
Hardware CPU OMAP850
Speed 201 MGz
RAM size 128 MB
Flash Size 256 MB
Data Bus 16 bits
Storage size 110.30 Mb
Display 240X320
Colors 65536
Bluethooth Version 2.0
Bluethooth Address 00:17:E896:89:7B
Identity Model No: ELF0100
Thanks,
Purushoth

hi,this thread for HTC Blue Angel only.

how do i bypass the country code error?
every wm 5 & 6 rom i tried still gives me the error...
please help me fix it!

Why don't you applied patch for certs?

Thanks for the posting and files...
HTC BA - PH20B1 (Siemens SX66 for cingular USA)
Please help...
I was able to update to 6.1 but stuck at the end
1. Did not get the screen alighnment option.
2. Screen alignment is missing, not able to click properly
3. Not able to see the programs
3. WIFI is not working
4. Sync is not working
5. Not able to run EXTROM
I appreciate your prompt response.
Thanks!
Ham3r said:
Windows Mobile 6.1 WWE by Ham3r
final version!
Windows Mobile 6.1 (build: 21042.1.6.1)
OS: WM6.1 WWE
Free RAM after SR: ~105 MB.
Screen's:
Software:
- ArcSoft MMS 5,
- 1-Calc,
- Jbed,
- FileExplorerEx,
- full Office (without ppt),
- Network Wizard,
- Comm Manager
- SIM Manager from Iolite.
After flash:
After flash, please make HR. After align screen, run ExtROM, please make SR!
Download:
- 4shared
Please don't make mirrors!
Click to expand...
Click to collapse

always make hardreset after flashing
press camera+record+reset during some seconds
in the open menu keep 1st line at no and select yes for 2nd and 3th lines
record change line and camera change yes/no
after that click mail button
if your mail button don't work (broken or something) use multi-port tty 1.42
search more info at forum