Database Users

HD2 not booting after rom install

Hi all ^^
I'm new here, and I just received my HD2 and wanted to flash it with one of the cool ROMs you have on this forum.
I flashed the HSPL with HSPL2 and everything went smoothly. Then I downloaded one of CleanEX DSE Core Rom (the 6.5 Maniless FRE) to be precise.
I flashed it, all was good, at the end the phone rebooted and i was stuck at the boot screen written "HTC CleanEX UDT DsE Series". I thought maybe it was because I didn't do a hard reset yet. So i did one, everything initialyze and when it's done same thing, the phone reboot and I'm stuck at the same boot screen...
I'm starting to get a bit stressed out because if I can't connect to Activesync I can't even put an original Rom or an other twinked one ><
Does anybody know what I did wrong or why it's not working ?
Thanks in advance for your answers.
PS: My phone is a french phone.

radio - go back and reread that roms thread for recommendation, however 2.07.50.x or higher should do it.
boot to bootloader, connect usb, flash radio, phone will now boot

Connect your phone to PC and turn it on while holding volume down, bootloader menu should apear (red,green,blue,white) then you can run Rom flashing tool on your PC
but i recomend flashing newer RADIO because this may be the reason for your current issue.

That was a really quick and effective answer !!
Thanks a lot to both of you !!!! *hugs*

its seriously the radio
DN41

I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.

smrazi said:
I tried to install HSPL but unfotunately it stops & my phone is not working. My HD2 hangs when HTC logo comes. I also try to copy stock ROM in SD card whilst pressing voldown & power keys, tricolour screen appeared & says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Then the phone hangs.
Could anyone tell me what is ROM flashing tool & what version should I install.
Please help me.
Click to expand...
Click to collapse
are you flashing the ROM on a different micro sd card? you cant use a 8GB or 16GB. Try a smaller card like a 1GB or 2GB.
also rename the stock ROM to LEOIMG.nbh.
put that ROM file on a smaller card and go into bootloader should come right up. worked for me when i had to re-install stock to return defective unit.

[Q] Hd2 bricked

I've tried to downgrade my HD2 from 3.14 to 1.66 from SD with leoimg.nbh
But I was wrong and I pressed powerButton instead of pressing volDown.
The result is:
00028002
Not allow
Then because the SPL is changed to 1.42, I've try to reflash 3.14, but the situation now is:
Now in bootloader I have
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
Someone can help me please?
thanks a lot!!
Now if I flash an original ROM I recieved VENDOR ID NOT ALLOWED
Sorry for my poor english...

So you haven't got hspl?
Try holding down both volume up and down and power button that'll do a hard reset
Sent from my HTC HD2 using Tapatalk

Restart the SD Card flashing again with the 1.66 ROM.

Eyy i got some other problem,
when i flashed to SPL-2.08.0000 8G XE
the stock rom didnt start after i flashed it,
i had white screen, then i tried to install radio 2.15.50.14 it gets stuck at 96% and i get ''96%!!'' and now nothings works...
some one any advice? or shall i start a new topic?
Thnx

luca_v3r said:
....
Now if I flash an original ROM I recieved VENDOR ID NOT ALLOWED
Sorry for my poor english...
Click to expand...
Click to collapse
Download the ROM from HTC's website, using your phone's serial number. It may be a stock ROM or one with the telephone company's name on it. You will not be allowed to download one which is not allowed on your phone.

So you haven't got hspl?
Try holding down both volume up and down and power button that'll do a hard reset
Click to expand...
Click to collapse
Now I don't have hspl , hard reset when i press VolUp for restore nothing happened ..
Restart the SD Card flashing again with the 1.66 ROM.
Click to expand...
Click to collapse
The response is not allowed..

pokerfreakje said:
Eyy i got some other problem,
when i flashed to SPL-2.08.0000 8G XE
the stock rom didnt start after i flashed it,
i had white screen, then i tried to install radio 2.15.50.14 it gets stuck at 96% and i get ''96%!!'' and now nothings works...
some one any advice? or shall i start a new topic?
Thnx
Click to expand...
Click to collapse
Download the ROM from HTC's website, using your phone's serial number. It may be a stock ROM or one with the telephone company's name on it. You will not be allowed to download one which is not allowed on your phone.
With the phone off, press and hold the Volume Down button then tap the Power button. You should now be in BootLoader mode.
Connect to your PC and the 'Serial' on the phone should change to 'USB'.
Now you can run the downloaded ROM. Please be patient, sometimes it can sit at 0% or 99% for a good five minutes.

Can i flash it to a android NAND, without a WM Rom? and with a radio 2.05?

You need at least 2.08 Radio. Also, you need HSPL and a Winmo rom to start the MAGLDR install.

Thanks thanks thanks thanks thanks thanks thanks
a lot of ALL!!!!!!
My error is that I try to flash a original ITALIAN rom, but my HD2 is from DE......
I'm very stupid...
Thanks ALL

You need to replace spl with hspl before flashing custom roms
Sent from my HTC HD2 using Tapatalk

[Q] Error After installing maglder

hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.

I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.

i didnt get it yet, its 5 minutes
thanks,

What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.

Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App

Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help

Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.

Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"

[Q] task29 error

Hi, I try to install android nand on my htc hd2. I had SPL 2.08.0000, so i do HARDSPL, everything was fine. Next step was changing radio to 2.15.50.14, I decided to remove windows phone stuff in task29. I did everything according to instructions, and installation was started. I waited few minutes, but progress bar was still on 0%. On hd2 screen, I got notification to press power button to start update or press volume down to cancel. I installed android first time, so I thought that pressing power button was right. Next, phone screen was changed on the htc logo and progress bar. After 4% hd2 was turn off, and i had error on task29 installer. Thats all. Now, I can't do anything. I turn on hd2, and i have 4-color screen with this information:
SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Please help me ;/

It appears the Task 29 did remove your ROM as you said it will only boot to the multi color bootloader screen. But because you got the error message the Task 29 must not have finished completly. It also appears you had a LEOIMG.nbh file on your SD card cause you said the following.
On hd2 screen, I got notification to press power button to start update or press volume down to cancel. I installed android first time, so I thought that pressing power button was right. Next, phone screen was changed on the htc logo and progress bar. After 4% hd2 was turn off, and i had error on task29 installer
Click to expand...
Click to collapse
.
So you see it appears to me that when your HD2 either booted into bootloader mode or was rebooted into bootloader mode it detected the LEOIMG.nbh file on your SD card and asked you if you wanted to flash the update cause that is what the bootloader is programed to do when it detects a LEOIMG.nbh file. And when you pressed the power button you told the HD2 to flash the file. So some how that messed up the Task 29 and the Task 29 messed up the flash of the nbh file.
I would remove the SD card and re run the Task 29 and then flash MAGLDR or cLK wich ever one you want to use for your Android bootloader. You can check out the guide in my sig if you want, it should provide some guidance to you.

When I remove sd card, progress bar(on installer and hd2) stuck on 0% and task29 shows error 262. After removing battery and turning of the phone again, on screen appears notification "Software update failed. Please try again". I still have SPL-3.03.0000. Maybe HSPL4 will help?

flamner said:
When I remove sd card, progress bar(on installer and hd2) stuck on 0% and task29 shows error 262. After removing battery and turning of the phone again, on screen appears notification "Software update failed. Please try again". I still have SPL-3.03.0000. Maybe HSPL4 will help?
Click to expand...
Click to collapse
Yeah if you have SPL version 3.03.0000 then you have to use HSPL 4 to flash HSPL that SPL version is why HSPL 4 was created by the DFT because HSPL 1 through 3 are not compatible with SPL version 3.03.0000. Go here for HSPL 4.
Also Task 29 wil not work without HSPL being on your HD2. I bet when you flashed via SD card it removed HSPL and that is why your Task 29 will not work.

Thanks for help. MIUI nand was installed

[Q] Hd2 flashing problem

Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..

ejjjjj said:
Hello everyone, I was trying to install new rom by using hd2 toolkit, first I did a task29 then I flashed radio. I mixed the steps and installed hspl, so after that I am not able to install anythink on my phone. First I tried installing Magdlr but it wouldn't passed 0%, then I tried task29 again and 0% again. Then I think the problem would be hd2 toolkit but no, I tried task29 standalone and no work, flashing a radio rom and no work. What can I do now? Thanks in advance..
Click to expand...
Click to collapse
Don't you read things carefully before doing something like this? If you had another phone, there's a chance you could have bricked it by doing something stupid like that.
Are you able to enter the bootloader? What SPL version does it show there? Have you tried flashing a stock ROM via the SD card?

First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50

I even tried installing stock rom but still no good! It stucks at loading... screen, help me please!!

hi, check the link Below, does it show the same SPL?

nope, mine is SPL-2.08.0000, but I can change it with hspl4, but can't downgrade it!

ejjjjj said:
First task29 was completed, then radio rom installed, and then hspl. All done by hd2 toolkit. After that I couldn't able to flash anythink like rom, task29 or else. So my phone only enters when i open it with volume button, else it only displays htc logo.
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
U mixed up the sequence mate, the guide says that 1st install HSPL then Task29 then Radio.
Did u still have connection between your phone and computer?
if not try hit reset button while holding down the volume key.

yep, i mixed it. i can reset it but without any rom update or any update (it won't pass 0%) it has no meaning to reset the phone. I have connection between computer via usb in bootloader mode only!

If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.

thamlim said:
If u can connect the phone to your computer via boot loader that's a good new's mate. There's still hope to fix your phone.
So u currently has SPL 2.08 right?
and please check if u has radio ver 2.15.50.14?
if u has both of this and u still cannot install MAGDLR.
I used to has this problem. After i decided to switch to cLK it Fixed everything.
may be u should try too .
U can do it via HD2tool kit. by connect phone to your computer under bootloader mode (the red green white blue screen)
** Dont' for get to chosing cLK partition that's match your ROM requirement **
after install cLK then install Recovery then Flash the ROM.
Click to expand...
Click to collapse
Please, if you don't know exactly what you're talking about don't give out incorrect information. It is NOT possible to install cLK without HSPL, and thus the Task29 won't work either.
@OP, have you tried installing a stock ROM from the SD card? I'm not sure exactly how to do this (see, not giving incorrect info ) but if I'm not mistaken the procedure is to rename the stock ROM to a .zip extension, unzip it, copy RUU_signed.nbh to the SD card and rename it to LEOIMG.nbh, then enter the bootloader and follow the onscreen instructions. However, please check somewhere else that what I've said is correct as well. From here, you can just flash HSPL then MAGLDR, CWM and a zip ROM.

Problem solved, thanks for your answers!