Hi I got my tab today I use z4root everything went fine few hours later my tab switch it self off now when I switch it on it just stays on the samsung logo please helo
Sent from my GT-I9000 using XDA App
Have you tried plugging your Tab into the Mains electricity supply and powering it on?
I still got battery if that's what you mean
Sent from my GT-I9000 using XDA App
No... sorry what I am referring to is plug your Tab into the elecrtic mains as if you were charging it and try switching it on.
It has been known to 'wake up' the Tab on machines that are stuck. This is because you can not perform a battery removal trick on the Tab.
Beards said:
No... sorry what I am referring to is plug your Tab into the elecrtic mains as if you were charging it and try switching it on.
It has been known to 'wake up' the Tab on machines that are stuck. This is because you can not perform a battery removal trick on the Tab.
Click to expand...
Click to collapse
Yeah tied that it just stays on the samsung logo
I got it from t-mobile uk do you know where i can get there stock firmware please
The last I heard (2 weeks past) was T-Mobile have not released their stock ROM out.
Have you tried going to samfirmware.com and looking for the ROM file there?
It would mean using Odin but to be frank I prefer Odin to Kies.
Kies bricked my SGS and Odin with samfirmware's ROM file sorted my bricked phone.
Yeah been to samfirmware got some firmware tried them but still no luck, im sure im doing right with odin can you give me some instructions just to make sure im doing right
If you want some instructions on using Odin have a look at this titled 'How to use Odin to Upgrade the SGS to Froyo'.
I know it's for the SGS but the principle is still the same.
b.t.w. I have got to shoot out for an hour.
Leave any messages and I'll get back to you later.
Ok thanks for your help
ownhd2 said:
Yeah been to samfirmware got some firmware tried them but still no luck, im sure im doing right with odin can you give me some instructions just to make sure im doing right
Click to expand...
Click to collapse
Did you went into restore mode yet and did a factory reset?
How do i do that please
ownhd2 said:
How do i do that please
Click to expand...
Click to collapse
Place your finger on the home button, push the volume up button and hold it together with the home button. Now while you push those two buttons, push the power button. Hold all three buttons together until you see the first screen. At that moment release all three buttons.
Select the option wipe data/factory reset in the menu that will be presented to you (use volume buttons to go up and down) and than either press the home button or the power button (can't remember which one) to confirm your choice.
Still no luck flashed new firmware still get samsung logo on the screen im stuck in what to do now
I tried to flash the latest firmware
Because of stupidness this was not really successful and my TAB didn't start after the flashing...
also pressing the power + volume down show's no effect.
the display turns on only when it's powered by the charger displaying 2 icons of a phone and a computer
Yes, the two icons are stating the Tab's awaiting connection to a PC but that does not help your predicament given you have already tried to flash another ROM.
Looking at the problem your only option now would be to contact your nearest service centre and explain the situation.
Bear in mind, Samsung got fed up of users rooting their phone's and sent a newsletter to all centres informing them if they receive any phones that had been rooted they were not to treat them under warranty.
You can read that newsletter here ~ Samsung Newsletter to Service Centre's ~ Rooting Voids Warranty
Give them a call anyway and see what they say. There should be one near you, I have three near me in the UK.
When I had a problem with my SGS I telephoned them, they told me to bring it in and would check it out there and then.
ownhd2, I had the same problem and I solved with this http://forum.xda-developers.com/showthread.php?t=854300
1) Download the the file HERE and extract the it
2) Inside the ZIP you will find Odin 1.7 + PIT file + PDA +Modem + CSC files.
3) Open Odin, select the PIT file + PDA + Modem + CSC into their respective places.
4) Make sure repartition is CHECKED.
5) put the phone in download mode and connect it to your computer. start flashing.
6) The device will reboot. If you are getting tons of FC's on boot, reboot into recovery and do a factory reset.
Done.
Thanks for the info will try it tomorrow. Thanks again
Sent from my GT-I9000 using XDA App
Related
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
there was a thread about that issue, turn off your phone, unplug the usb cord, plug the usb cord. hold vol up and vol down and the power button. it will come on but when it goes off release the power button and keep holding down the vol up and vol down. should go into auto download mode. then u can reload it via odin.
xsilvercivicx said:
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
Click to expand...
Click to collapse
this is normal just continue to download mode as normal.
http://forum.xda-developers.com/showthread.php?t=741027
you can save your device through odin, plug your phone in to your computer and try to go into download mode may take a couple tries, and flash the stock ROM you can find on these forums
i have already tried the sequence to get it into download mode... it doesnt work... tried adb and nothing registers....
anymore ideas? looks like im going to have to do a warranty exchange.
The only way I can reliably get to download mode is: power off, remove battery, replace battery, hold both vol buttons, plug in usb. works every time though.
Sent from my SGH-T959 using XDA App
update
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
sorry
hey guys thanks for all the help and suggestions... at first i just thought i would post in a development sections for some reason that made sense to me.. and im sorry if i posted in the wrong section....
xsilvercivicx said:
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Click to expand...
Click to collapse
are you using a .pit file? and if so is it the right 512 .pit file?
if both those are yes, delete the one on your system and re-download it.
I had this same exact problem a few weeks back Odin would hang on the pit file, just redownloaded and it worked like a charm.
and just a quick reminder of everything out for the Vibrant right now
Only stock firmware use the 'PDA' option a pit file, and re-partition
froyo firmware use the 'PDA' option and a pit file, no re-partition
JACs kernels use the 'CSC' option and no pit file, no-repartition
i have a Bell Vibrant and all the methods don't work. i tried the 3 button (remove batt,place in batt, plug USB, wait for the the ''star" to appear, hold VOL+/- and POWER and wait for the screen to turn off, release POWER, but it just goes back to recharging screen. tried it 40 times
tried the power off, remove battery, replace battery, hold both vol buttons, plug in usb. no go as well.
ANything else? I'm stuck at the boot screen (the 'S' glowing part).
This is what always works for me.
Unplug your USB from your phone
Makes sure ODIN is ready to go on your PC
Hold down the Down Volume and Power until the download screen comes on
Then plug your USB back into the phone
fire up odin
pull your battery
connect phone to pc WITH THE BATTERY OUT
hold volume up+down and power
put battery in while still holding those buttons
the screen will light up with....something. Wait for the screen to blink and then release the buttons.
You are now in download mode!
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Deliximus said:
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Click to expand...
Click to collapse
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
mesajoejoe said:
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
Click to expand...
Click to collapse
Dude, the Vibrant is new to us all. None like it. So dev wise its harder to explain and understand when we are used to coming from a one press method, now were using Odin, and Thor's hammer to flash our phones, which is god awful, no pun intended.
Dont flame your fellow Vibrant user cause he doesent understand the 613 steps it involves, and every other way to do so. Help the kid.
I am also in this position, just using a finger in the socket method, if its on it'l shock me, know what i mean. Just try it all. I have a feeling its getting harder and harder to brick phones because the manufacture is not retarded, they fix them right back, and ship them back out to customers who need replacements. I know this as a friend works at an AT&T shipping warehouse.
So cant we all just hit a bong, or get a long? And help?
If someone could explain all this 512PIT, PDA, and CSC, and Phone. It would help so much, sometimes a picture is worth a thousand words. Just sayin.
"Oh man, I am so high right now, i have no idea whats going on."
-Towelie
aloxotls said:
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
Click to expand...
Click to collapse
Yeah man, i'll try it again!! And when do I start typing (sending out the adb command) when the power turns on? Thanks.
Question is: when i press power+vol Down, the boot splashscreen comes on (Galaxy S etc etc).....
I am sorry you have a Bell Vibrant, it is a little different than my phone. I found this hope this helps
HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
I also read that some of the Bell Vibrants had their Download/Recovery mode disabled.
http://forum.xda-developers.com/showthread.php?t=754673&highlight=bell
As far as the adb command I would start as soon as it powers on. It will say "error:device not found" at first, but just keep on hitting arrow up and hitting the enter in the command window until it accepts the command.
Good Luck
So I installed this (Android 2.2 build i9000XXJPH) on my Tmobile Vibrant and it worked beautifully, but then I went to root my device through "one-click" and when it got to the part in recovery mode, i tried pressing the power button to apply the update but nothing happened and now I'm stuck in recovery mode all the time, as soon as I plug the phone in to charge, or plug it in the computer via usb, or push the power button, the damn thing goes into recovery mode and stays there. I can use the volume buttons to navigate up and down through the options and if I hold the power botton down long enough the phone will turn off and back on again. But if I press the power button once (as in select an option) it doesn't do anything. I tried every single option out there to get into download mode with the battery out and usb in and volume buttons then put bat in....etc nothing works. I need to get into download mode
anyone?................
drhusamali said:
So I installed this (Android 2.2 build i9000XXJPH) on my Tmobile Vibrant and it worked beautifully, but then I went to root my device through "one-click" and when it got to the part in recovery mode, i tried pressing the power button to apply the update but nothing happened and now I'm stuck in recovery mode all the time, as soon as I plug the phone in to charge, or plug it in the computer via usb, or push the power button, the damn thing goes into recovery mode and stays there. I can use the volume buttons to navigate up and down through the options and if I hold the power botton down long enough the phone will turn off and back on again. But if I press the power button once (as in select an option) it doesn't do anything. I tried every single option out there to get into download mode with the battery out and usb in and volume buttons then put bat in....etc nothing works. I need to get into download mode
anyone?................
Click to expand...
Click to collapse
Try holding volume -+ then plug in the usb at the same time this should go into download mode.
P.S. dont touch the power button for nothing.
Try these steps:
1. Take out your battery
2. Hold vol up and vol down, continue to hold
3. Insert USB while still holding down the vol buttons
That should get you into download mode (it did for me)
thanks but I already tried that, doesn't work still goes into recovery mode
Does adb work in recovery?
Sent from my SGH-T959
nope it says device not connected
Try the same procedure with the USB cable plugged in. I go into recovery if the cable is unplugged and I go into download mode if the cable is attached. Buttons are always the same. Vol +/- then power until I see the screen show something. Then release power.
Well my friend, u flashing the i9000 rom to ur fone is the problem. They button set up is different they have a big menu button in the middle and we dont. That y u cant move it at all.
Sent from my SGH-T959 using XDA App
make sure your phone can get into download mode before flashing a i9000 rom. If your phone is able to get into download mode before flashing a i9000 rom then it's general impossible to brick your phone by flashing a i9000 rom. After flashed to a i9000 rom, to get to download mode, you hold "volume down" + "soft home key" + "power button" for 3 seconds. If "volume down" don't work, try holding "volume up".
I have done it many times with i9000 roms...the "soft home key" is the touch home icon on the bottom of our Vibrant.
trashcan said:
make sure your phone can get into download mode before flashing a i9000 rom. If your phone is able to get into download mode before flashing a i9000 rom then it's general impossible to brick your phone by flashing a i9000 rom. After flashed to a i9000 rom, to get to download mode, you hold "volume down" + "soft home key" + "power button" for 3 seconds. If "volume down" don't work, try holding "volume up".
I have done it many times with i9000 roms...the "soft home key" is the touch home icon on the bottom of our Vibrant.
Click to expand...
Click to collapse
dude I could swear I did this a million times before and it did not work but it just did I'm in DOWNLOAD MODE FINALLLYYYYYYYYYYYYYYYYYYYYYYYYYY
Thank You Thank You Thank You
Thank You again
and again
and again
ok so thanks alot for all the help guys but i have one more question. How do I get it to original stock.. i flashed it like 4 times now and none of the roms I got seem to be the right one. The phone works fine but the volume buttons are flipped, when u press up it goes down and when u press down it goes up, so I know thats not the right one.. anyway i got those firmwares from here "http://www.samfirmware.com/WEBPROTECT-i9000.htm" btw u need to make an account to be able to see them. so my question is, can anyone tell me where to get the original stock firmware to flash with odin? oh and I did try Kies from samsung but the phone will not connect with that for some reason.. anyway any help is very much appreciate it
thaks
drhusamali said:
can anyone tell me where to get the original stock firmware to flash with odin?
Click to expand...
Click to collapse
the search box can, or reading the stickies. but since i'm feeling generous i'll save you the five seconds it took me: http://forum.xda-developers.com/showthread.php?t=734475
chui101 said:
the search box can, or reading the stickies. but since i'm feeling generous i'll save you the five seconds it took me: http://forum.xda-developers.com/showthread.php?t=734475
Click to expand...
Click to collapse
I honestly searched for it, and did find few posts but everytime I flashed the phone, it just didn't feel like the right one, so thats why I asked for help here.
Thanks for the link though, much appreciated.
same issue
So i am having the same issue...gonna try to get it into download mode and go back to stock. You (original poster) said you had the Android 2.2 build i9000XXJPH working in your device? I did'nt get that far, that is what has me stuck in this recovery limbo...how did you originally get it to work? And also assuming I work for T-MO, assume that 2.2 is coming out NO time soon!! This kind of is a bummer, I love the vibrant but I think I need to go back to a true android, I can't keep feeling left behind because Samsung cares more about friggin avatar then updating their phones.
Flash the froyo that dont brick your phone (search the forum), and after that flash the stock vibrant.
If you flash a ROM not meant for your phone I'm surprised you made it this far.
~SB
toast
Yea i was suprised I made it this far too....BUT now my vibrant is toast!! I had it back to stock, woke up this morning and accidentally accepted the J16 OTA from TMO, and now my phone is done done done....I cant get it to do anything, no lights, camera or action. So having no way to get back to download mode I think Im screwed. This was a problem from the gate, cause Samsung gave me the phone from a learning seminar and the 1st J16 MR soft bricked me. So at this point I have searced every forum I can find and I think Im screwed. NOw if I could only get ahold of my Samsung rep to see if they replace it for me....IF anyone has any strokes of genius to maybe help me out please....
I tried applying [110% SAFE] 3-Button Combo FiX for Selected/ALL Firmwares
It failed and now I had a Phone ! PC logo. I can get a USB JIG but will it still boot to download mode? If it does, what should I flash it with? stock 2.1? stock 2.2? Please help!! Am I still able to get into DOWNLOAD mode with JIG?? THANKS!!!
P/S Flash this fix on my friend's i9000 and it worked. No Idea why didnt worked on mine =(
Any help please????
Your bootloader is fine if you get the PC-phone blinking icon. Best bet is to send your phone for warranty.
What was your original OS before flashing, 2.1 or 2.2?
You should flash the full package of whatever OS you were on by using the jig to get to the donwnload mode then flashing with Odin.
I will try to make a USB JIG and get in to download mode. Will flash stock firmware and see. Thanks! So if there's still Phone ! PC icon, bootloader still intact?
I'd you still have download mode, I have found that holding all three buttons and when galaxy logo comes up releasing all it works?
Open Odin. In PDA add a new kernel ie voodoo. Put phone in download and connect to Odin. Press start and in 20 seconds all should be good. Always works for me. Just a kernel file though. No repartition. auto reboot checked. Good luck
Sent from my GT-I9000 using XDA App
xchasa said:
I'd you still have download mode, I have found that holding all three buttons and when galaxy logo comes up releasing all it works?
Open Odin. In PDA add a new kernel ie voodoo. Put phone in download and connect to Odin. Press start and in 20 seconds all should be good. Always works for me. Just a kernel file though. No repartition. auto reboot checked. Good luck
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The phone has no 3 button combo, that's why I tried applying the 3 button fix but it brick. So I hope as long as it still shows Phone ! PC logo, it's still able to get into download mode using usb JIG.
Yes, the JIG should put the phone in download mode... its a very useful tool so look after it.
then when your in download mode, i personally would flash 2.1 with all 3 files and PIT. also check the re-partition box in odin. and start again good luck.
yvliew said:
The phone has no 3 button combo, that's why I tried applying the 3 button fix but it brick. So I hope as long as it still shows Phone ! PC logo, it's still able to get into download mode using usb JIG.
Click to expand...
Click to collapse
Ok. Sorry. Some people think they've got no 3 button combo when in fact they only have no recovery.
Sent from my GT-I9000 using XDA App
xchasa said:
Ok. Sorry. Some people think they've got no 3 button combo when in fact they only have no recovery.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Very true !!! happened to me on my Galaxy Spica, had the Phone ! PC sign, thought it was bricked..... I laid a brick.... But download mode worked so i fixed it and give it to the misses
http://forum.xda-developers.com/wiki/index...#Bricked_Screen
Bricked Screen
(A.K.A. phone-!-pc or Black Screen of Death)
For reference, this is what a bricked Samsung Galaxy S looks like. To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death
A fully bricked phone (as shown on the screenshot) will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
http://www.youtube.com/watch?v=Y8nlJTWV7Nk...player_embedded
have u try this???
Hold down Vol UP+Vol Down+Power
Vol up vol down cannot be both held its a rocker switch .
jje
I think I posted in i9000 forum?? Your method is for vibrant???
enaleni said:
http://forum.xda-developers.com/wiki/index...#Bricked_Screen
Bricked Screen
(A.K.A. phone-!-pc or Black Screen of Death)
For reference, this is what a bricked Samsung Galaxy S looks like. To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death
A fully bricked phone (as shown on the screenshot) will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
http://www.youtube.com/watch?v=Y8nlJTWV7Nk...player_embedded
have u try this???
Click to expand...
Click to collapse
yvliew said:
I tried applying [110% SAFE] 3-Button Combo FiX for Selected/ALL Firmwares
It failed and now I had a Phone ! PC logo. I can get a USB JIG but will it still boot to download mode? If it does, what should I flash it with? stock 2.1? stock 2.2? Please help!! Am I still able to get into DOWNLOAD mode with JIG?? THANKS!!!
P/S Flash this fix on my friend's i9000 and it worked. No Idea why didnt worked on mine =(
Click to expand...
Click to collapse
I used the same method for getting 3 button down mode, and my I9000 brick same like yours !!
And I bought JIG cable, but even JIG did not help me, I9000 is totaly DEAD and GONE !!
Do not use this method!!
EDIT : I've fixed it with JIG... Thanks!!!
danc00 said:
I used the same method for getting 3 button down mode, and my I9000 brick same like yours !!
And I bought JIG cable, but even JIG did not help me, I9000 is totaly DEAD and GONE !!
Click to expand...
Click to collapse
yvliew said:
EDIT : I've fixed it with JIG... Thanks!!!
Click to expand...
Click to collapse
making (or maybe buy) a JIG is the way to get back to live the phone, even the screen shows nothing.
i had the same problem , while trying to "unlock " the 3 button combo my galaxy s managed to become a brick , so i made the jig and flashed it again with 2.2
i still lack the 3 button combination but whenever i need to get to donwload/recovery mode i use ADB
easier and safer
good luck mate
@danc00: no phone is dead. i know people with a riff box who give this phone life for only 30€.
you only need a jtag / riff box
http://www.youtube.com/watch?v=T7edUXE7jLg
if you want to send it to germany to give it life again give me a message.
first you should search smbdy who has this box in your country
@kako: if the first and the second bootloaders are damaged only a jtag/riff box can help your phone ah or samsung itself i dunno what they use for it
cheers
Hello i tried to flash the new 2.3.4 android in my galaxy s ii
when it was on screen Downloading , do not turn off the target
after 30-40 mins waiting for odin to flush the firmware, nothing happened
so i decided to remove the usb and turn off my galaxy.
Now the phone does nothing cant open it .
Anyone know how i can fix this?
I think your best bet is a jig, check out this thread: http://forum.xda-developers.com/showthread.php?t=819551
Enyan said:
I think your best bet is a jig, check out this thread: http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
My phone when i press power on doesn't do anything (neither shows White Samsung Logo), so Jig solution doesn't work
Have you tried to put it in download mode? Press volume down, home button and sleep button at the same time. Then flash with odin
Sent from my GT-I9100 using XDA
This happened to me as well I managed to put it back into download mode and flashed again and it worked
Sent from my GT-I9100 using XDA App
immunity said:
My phone when i press power on doesn't do anything (neither shows White Samsung Logo), so Jig solution doesn't work
Click to expand...
Click to collapse
Would make more sense to read the instructions on the recovery jig rather than say it does not work .
jje
JJEgan said:
Would make more sense to read the instructions on the recovery jig rather than say it does not work .
jje
Click to expand...
Click to collapse
Well i just copied what the instructions say "If ur phone doesn''t display white Logo and its always black screen then sorry this fix cant help you"
When i tried to flash the unofficial 2.3.4 firmware my device was not rooted (was officially updated to 2.3.3) dont know if that make a matter.
I remove battery, insert it then i press and hold Volume Down + "Home" and press for 1 sec the Power . Nothing happens (but after a while my phone get warm up like it is working backgroundly) screen is always black
immunity said:
When i tried to flash the unofficial 2.3.4 firmware my device was not rooted (was officially updated to 2.3.3) dont know if that make a matter.
NO
I remove battery, insert it then i press and hold Volume Down + "Home" and press for 1 sec the Power .
Hold down home and power and Vol Down until phone boots to download mode ..
If that fails remove battery replace battery put USB recovery jig into usb socket phone should now boot . If not you need a service centre .
#
jje
Click to expand...
Click to collapse
JJEgan said:
immunity said:
When i tried to flash the unofficial 2.3.4 firmware my device was not rooted (was officially updated to 2.3.3) dont know if that make a matter.
NO
I remove battery, insert it then i press and hold Volume Down + "Home" and press for 1 sec the Power .
Hold down home and power and Vol Down until phone boots to download mode ..
If that fails remove battery replace battery put USB recovery jig into usb socket phone should now boot . If not you need a service centre .
#
jje
Click to expand...
Click to collapse
Thanks Jje
Click to expand...
Click to collapse
immunity said:
My phone when i press power on doesn't do anything (neither shows White Samsung Logo), so Jig solution doesn't work
Click to expand...
Click to collapse
Well, if your read through the thread you will probably find people who have/had the same or a similar problem and you might find the solution there. Also it is still your best bet...
i will Enyan thanks
I had the same problem. I couldn't get it out of download mode - although pressing the power button for a few seconds did switch it off, which reset the progress bar.
In my case the solution was to reflash using Odin on my laptop rather than my desktop PC. It worked fine from the laptop.
Good luck.
Sounds like you failed to kill ALL Kies processes properly thus making Odin fail to flash. Just a hunch.
Sent from my GT-I9100
d3l1 said:
Sounds like you failed to kill ALL Kies processes properly thus making Odin fail to flash. Just a hunch.
Sent from my GT-I9100
Click to expand...
Click to collapse
Ye :/ i had killed 2 processes while there were 3. I will have to wait till tommorow so i can make a jig and fix my phone (hope it work for me)
I'm pretty sure I just bricked my **@#*& phone trying to Flash the Semaphore 1.6.0Bm kernel
It failed the first time around when I tried to flash it via Odin.
So I took the battery out like I usually do then went to put it back into download mode... To my surprise I cannot get into download or recovery mode anymore.
I've tried all button methods and none worked. I can't get past the screen that has the cell --- computer screen.. Looks like I may need a jig now...?
Any other ideas that I might be able to try?
Thanks.
What happens when you three finger boot and just keep holding it? Same screen you have now?
Sent from my SCH-I500 using XDA App
efan450 said:
What happens when you three finger boot and just keep holding it? Same screen you have now?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You mean holding the Vol up & down, Home and power button?
Same thing.
I've left the battery out for over 20 minutes, tried it while plugged into the computer, the adapter and not plugged in at all.. Still nothing.
This sucks..
if the phone doesn't do anything at all you can probably take it in to your service center and tell them it wont turn on but it didn't get wet or anything... ubless they have some magical way to get it into download then they'll replace it if you're under warranty.
Sent from my MIUI SCH-i500
Load up Ubuntu or something and load up heimdall command line. There should be an option to kick it out of the connect to PC screen.
Sent from my ADR6350 using XDA App
Thanks for your responses.
I tried the OneClick.jar heimdall method but it seems to not recognize that the phone is even plugged in.
I did just purchase a USB jig off ebay, I'm guessing that this is my last option before having to bring it back to Telus for a replacement
have you heard of One-Click UnBrick?
I have seen that screen a few times. This worked for me every time to get it back into recovery...
http://forum.xda-developers.com/showthread.php?t=1153310
studdyhalllooser said:
have you heard of One-Click UnBrick?
I have seen that screen a few times. This worked for me every time to get it back into recovery...
http://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
Thanks for the Link but I gave this a try and unfortunately the phone isn't picked up by any of my computers (XP, Mac OSX & Ubuntu), when connected Via USB. Failed everytime
iwebsource said:
I've tried all button methods and none worked. I can't get past the screen that has the cell --- computer screen.. Looks like I may need a jig now...?
Any other ideas that I might be able to try?
Thanks.
Click to expand...
Click to collapse
I got this same problem when I installed CM7 on my T959d for the first time and Odin hung after clicking [Start]. Rebooted my phone and was greeted with a nice soft-brick screen. What a scare that was.
Here's what I did:
1. Take out the battery from the phone.
2. Plug the phone via USB to the PC (odin was open)
3. Hold down [VOL -] key
4. Hold down [POWER] key
I don't remember if the SGH-GTI9000 screen popped up, but if it does, wait for it to switch back to a black screen and then release just the [POWER] key, keeping [VOL -] pressed.
That put me back in Download Mode. Fired up ODIN again and the flash was successful this time around.
edit: Also, the Semaphore kernel i see in i9000 is for JVS roms. I'm not sure how that would affect darkys, since it's a JVR rom.