i cant turn it on or charge my vibrant bt when conected to usb mounting error shows think should use a jig to try to get to download mode?then odin back to stock ?
Related
hi i just tried to upgrade my friends galaxy s from eclair to gingerbread bt it failed at odin n its stucked on black screen of death ie phone-!-pc .Now i cant set it back to download mode neither pc recognize it . i m in delimma heard abt usb jig bt i cant get it here since i m in hostel is there any other way to boot it back to download mode?
thankx
kensheen said:
hi i just tried to upgrade my friends galaxy s from eclair to gingerbread bt it failed at odin n its stucked on black screen of death ie phone-!-pc .Now i cant set it back to download mode neither pc recognize it . i m in delimma heard abt usb jig bt i cant get it here since i m in hostel is there any other way to boot it back to download mode?
thankx
Click to expand...
Click to collapse
do you have rebootet the pc?
ken2802 said:
do you have rebootet the pc?
Click to expand...
Click to collapse
yes i rebooted my pc n tired on other 2 pc too.also changed the usb cable bt no luck .
and the "downloading" screen doesnt shows up?
just hold the 3 key salute buttons to go back, with the USB cable plugged in, to go back to Download mode
you did keep the usb cable plugged in?
nyloncrack said:
just hold the 3 key salute buttons to go back, with the USB cable plugged in, to go back to Download mode
you did keep the usb cable plugged in?
Click to expand...
Click to collapse
No need to, you can reach download mode with or without the usb cable.
B.
BenjaminX2 said:
No need to, you can reach download mode with or without the usb cable.
B.
Click to expand...
Click to collapse
can u clarify me plz?
:crying::crying:
My galaxy Y when connected to my PC via USB doesnt show up.I have enabled USB debugging but the phone just charges and does not show USB Connected......This happened after I flashed another Doky73 Odin package which was new..but now it wont connect:crying::crying:
-----------------------------------------Edit--------------------------------------------------------------------------
Now my Packet Data doesnt work....It just stopped working this morning..yesterday it was working.
muftiazan said:
:crying::crying:
My galaxy Y when connected to my PC via USB doesnt show up.I have enabled USB debugging but the phone just charges and does not show USB Connected......This happened after I flashed another Doky73 Odin package which was new..but now it wont connect:crying::crying:
-----------------------------------------Edit--------------------------------------------------------------------------
Now my Packet Data doesnt work....It just stopped working this morning..yesterday it was working.
Click to expand...
Click to collapse
Maybe try using another usb
or else
Go to recovery mode and restore your phone to factory settings.
you can also do it by going into settings->privacy->factory reset data
hope this helps:laugh::good:
try to reset the phone via odin,
there are tutorials in the general thread
You haven't installed the drivers. If you have, then they aren't right,
In doky73's thread, move to the second post, there's a link to the USB Drivers.
Hi. I tried to find a thread with my problem but I couldn't so I'm creating this one.
I have a Samsung Galaxy s4 i9500 with a custom kit kat rom (OzcanRom). I tried to revert to stock using odin but I can't make download mode work. When I start the phone in download mode it immediately says "Downloading do not turn off target" altough I haven't connected to the computer yet. The phone does not respond so I have to take the battery to restart. If I connect the phone to the computer, the computer doesn't recognize it. It doesn't even appears on device manager (I also looked for unknown devices and it is not there).
I tried to do a factory reset through recovery but it doesn't work. Odin worked previously so I don't know what it doesn't works now.
alexsaez said:
Hi. I tried to find a thread with my problem but I couldn't so I'm creating this one.
I have a Samsung Galaxy s4 i9500 with a custom kit kat rom (OzcanRom). I tried to revert to stock using odin but I can't make download mode work. When I start the phone in download mode it immediately says "Downloading do not turn off target" altough I haven't connected to the computer yet. The phone does not respond so I have to take the battery to restart. If I connect the phone to the computer, the computer doesn't recognize it. It doesn't even appears on device manager (I also looked for unknown devices and it is not there).
I tried to do a factory reset through recovery but it doesn't work. Odin worked previously so I don't know what it doesn't works now.
Click to expand...
Click to collapse
Hi
The message Downloading do not turn off target is normal when in download mode even if you are not connected to the PC , what you mean the phone does not respond? what do you see in Odin , does Odin acknowledge that the phone is connected?
If Odin does not respond try this:
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
From this thread
http://forum.xda-developers.com/showthread.php?t=2265477
solved
MAX 404 said:
Hi
The message Downloading do not turn off target is normal when in download mode even if you are not connected to the PC , what you mean the phone does not respond? what do you see in Odin , does Odin acknowledge that the phone is connected?
If Odin does not respond try this:
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
From this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
You were right, another usb cable solved the problem. The message "Downloading do not turn off target was misleading". Thank you so much!
My Note 4 is n910cq with Exynos and I downloaded Android 6 from an xda thread and while I try to flash it through odin I got an error. After that the phone stuck with a screen says"firmware upgrade encountered an issue please select recovery mode ın kies and try again". I can put the phone into download mode but not able to get it to recovery mode. I tried to flash older roms but still keep getting error in odin. I tried Samsung smart switch app through upgrade section but no result. So, what to do?
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
tareqjordan said:
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
Click to expand...
Click to collapse
Thanks a lot. I changed the cable and PC and works good.
I can not transfer my file to phone from computer. I try a lot of solutuion for exp USB debbuging... I want to download stock rom with odin mode but olso pc don't see. I try another pc or cable. I think usb is error but ı can charging with adaptor. Can you help me ? I go to service but they said your phone's screen is broken...
When ı acces to recovery mode. ı see " fail to open recovery_cause"
do u have drivers?
try different version of odin from sammobile
use genuine cable - I've had issues with non orginal cables just like yours
try to use needle and get dirt from phone port - I've been through that a few times