Related
have we gotten any new updates for it???
there was only one update that I know of, maybe a month ago? anyway it sucked, had some extra adds or some crap I can't remember, so I went back to the old one, it still works fine.
Does the old one work with CM7?
I'm wondering if there's been any recent updates after the last one?.....
oohaylima said:
Does the old one work with CM7?
Click to expand...
Click to collapse
Yes, theres instructions in the aospcm wiki.
sent from my hero, which no longer sucks ass
I know 99% of users have had success with wiki method #2 (install the apk, and use TB to restore data only) but for me that only worked for the 1st time I went to the vvm app. Subsequent attepts and reinstalls I get an error that simply states "cannot play message". I'm not too concerned and haven't really tried to find a solution. But I will try again after I flash the newest ROM update. I'm ashamed to admit I'm currently running AOSPCMod dated Feb 5. What can I say, I've been busy! Runs good though, after applying the GPS tweaks that were solved around Feb 18. But Ive got time now so I'm ready to see if the last month of updates will have me printing money...they did finally get that merged, right?!
Sent from my HTC Hero CDMA using XDA App
The Fer-Shiz-Nizzle said:
I know 99% of users have had success with wiki method #2 (install the apk, and use TB to restore data only) but for me that only worked for the 1st time I went to the vvm app. Subsequent attepts and reinstalls I get an error that simply states "cannot play message".
Click to expand...
Click to collapse
I'm in the same boat. I used method two, and I can compose fine, but playing messages is a no go. The only time it worked fully was when the first batch of CM7's came out.
So when I try method 2, it does not give me an option to restore after I install vvm...Pretty new to all this jive so any help would be appreciated
Titanium backup works great
Sent from my HTC Hero CDMA using XDA App
Method # 2 worked for me...
just make sure to follow steps as indicated
Followed the directions on the wiki for method #2. I tested the functionality composing and sending a vvm to myself. Works flawlessly. However, when anyone else leaves a message I can see it but I get the error " Unable to play message."
MY problems ditto post # 9796 in [ROM] aospCMod | AOSP 2.3.3 / CM7 (Gingerbread) [03/10/2011] thread.
Guidance for a noob?
sponger1 said:
Followed the directions on the wiki for method #2. I tested the functionality composing and sending a vvm to myself. Works flawlessly. However, when anyone else leaves a message I can see it but I get the error " Unable to play message."
MY problems ditto post # 9796 in [ROM] aospCMod | AOSP 2.3.3 / CM7 (Gingerbread) [03/10/2011] thread.
Guidance for a noob?
Click to expand...
Click to collapse
I don't know. I followed that wiki to the letter, and still get what you're getting. We may be the unlucky few that the voicemail refuses to work.
When on CM6 I flashed vvm apk and had no issues. Granted, going to GB is a big switch but WHY would a similar fix (such as in the AOSP wiki) not work? Can it be explained in a nutshell?
Thank you to anyone that can humor my curiosities.
sponger1 said:
Followed the directions on the wiki for method #2. I tested the functionality composing and sending a vvm to myself. Works flawlessly. However, when anyone else leaves a message I can see it but I get the error " Unable to play message."
MY problems ditto post # 9796 in [ROM] aospCMod | AOSP 2.3.3 / CM7 (Gingerbread) [03/10/2011] thread.
Guidance for a noob?
Click to expand...
Click to collapse
oohaylima said:
I don't know. I followed that wiki to the letter, and still get what you're getting. We may be the unlucky few that the voicemail refuses to work.
Click to expand...
Click to collapse
I haven't use aosp but i try method 2 on RC2 and currently running on Nightlies #17 is working fine with no problems.
might be an issue with the rom ? not sure.
"Unable to play message" work around
EL_G15 said:
I haven't use aosp but i try method 2 on RC2 and currently running on Nightlies #17 is working fine with no problems.
might be an issue with the rom ? not sure.
Click to expand...
Click to collapse
Thanks for that.
See previous post, I get "Unable to play message" notification but have found this to work, although rather cumbersome to get a VM.
It's not clean and obviously not optimal for checking VM.
Open VM app > Menu > Settings > Personalize voicemail > OK > 1
Does this work for anyone else? If so, what can be done to alleviate pushing buttons monotonously?
Don't know. I'll give that a shot once I'm on break.
sponger1 said:
Thanks for that.
See previous post, I get "Unable to play message" notification but have found this to work, although rather cumbersome to get a VM.
It's not clean and obviously not optimal for checking VM.
Open VM app > Menu > Settings > Personalize voicemail > OK > 1
Does this work for anyone else? If so, what can be done to alleviate pushing buttons monotonously?
Click to expand...
Click to collapse
Hey, I can check them now. Woohoo!! Yeah, it is a little rugged, but at least I can hear them now.
Just wanted to say that I flashed 17 today, and it finally worked!! Woohoo!!! I love the nightlies; always making my hero better, and better.
Since brianlili has joined us at XDA he is now posting this himself. Please see his thread here:
http://forum.xda-developers.com/showthread.php?t=1332410
Bravo 2.2 v1.7 by brianlee
brianlili said:
Change log for bravo2.2-V1.7
Battery charging progress indicator by media leds.
Choose network operator menually function.
Fix ussd service unavailable issue.
Fix browser crash issue when visitting "https" website.
Linux ext4 partition supported(thanks mz's support).
Default language english, default local USA.
ps: details about charging progress, 5%-40% camcorder led turn on; 50%-80% camera, camcorder leds turn on; 90% three of them turn on; 100% three of them trun off, charging finish.
Click to expand...
Click to collapse
Downloads
v1.7
- Link - Thanks biranlili in post #484
EPM Update for 1.7
Attached to post #530 by brianlee
Instructions
Download 1.7 from the link above.
Download the Update from above (if you want enhanced power menu).
Extract the contents of the 1.7 download.
Copy the contents of the 2sdcard folder to the root of your sd card. (You can skip the OpenRecovery files and just copy the nandroid folder if you already have OR/AOR installed).
Copy the update ZIP file into /sdcard/OpenRecovery/updates
Reboot into OpenRecovery
Nandroid > Restore > bravo2.2-brian
Apply Update > epm-patch-bravo1.7.zip
Wipe Cache, Wipe Dalvik, Factory Reset (You should be able to skip this step if already using Bravo).
Let me know if there are any problems with this info, thanks!
Old info;
Downloads
v1.6
- Link 1 - or - Link 2 - Thanks to gn01222116 and LibertyMonger for re-uploading.
Update for 1.6
Download (by brianlee and Mioze7Ae, see this post and this post for more info. (Updated 2011.10.05)
Now up to v1.6, see post #47 in this thread for download links. Thanks to gn01222116 for the update this time.
Edit: Just a quick note, apparently the author of this ROM (Brian Lee) is now on XDA with username brianlili - thanks Mioze7Ae.
v1.5 is out, see post #33 in this thread.
Thanks to patejlice for keeping us updated.
See post #32 for 1.4b:
http://forum.xda-developers.com/showpost.php?p=17307255&postcount=32
Update, 08/30, v1.3
There is a new version of this ROM out for anyone interested, see original link in OP. I did end up trying this briefly before, I will give it another shot this weekend I think.
Maybe some changes can even be merged with XDA Special.
From what I understand the "T Roaming" menu was removed/changed - this is something I asked about when we first started working with WanHu ROM.
Also a message I get all the time about network time not being set has been removed.
And there is mention of the radio volume being fixed.
Not sure what else has changed ....
Original Post v1.1:
http://translate.googleusercontent....1.html&usg=ALkJrhiBqSrDMFLum-H24idHFH1BoUH1ew
I can't seem to make it through the registration process to download this as even with the Google translation I am missing something on the registration page.
If anyone has more luck can you post the download here so we can try it?
Thanks!
Click to expand...
Click to collapse
###translation post from brianlee in http://bbs.mfunz.com/thread-163142-1-1.html###
v1.1
download link removed please see link 6 for mirror
download>root>openrecovery>nandroid restore>wipe cache>wipe dalvik cache>wipe user data>reboot
update
livewallpaper and market apkclick here
install to system/app
everything smooth to be very fast 169mb available internal storage, has no build in keyboard, supported language english (default), korean, simplified chinese, traditional chinese
setting>language and keyboard>user dictionary (force close)
confirmed time sync is working
###
original post from brianlee
Rom featrure v1.1:
1. Stock froyo UI, after boot has about 60mb ram, included motoblur launcher
2. fix chinese txt problem and loud fm volumn
3. fix korean number format, removed "-" in between numbers
4. hardware perfection media button is working, switch sequence as normal(also work as screen on)wifi gps edge all working
5. support hardware decode for h.264, galley camera record app are official moto apps all works good
6. better battery management idle time up to 72 hrs, better than 2.1
7. swap and app2sd supported, simply fastboot with fjfalcon's kernal
8. can use "system application remover" to uninstall some program such as google map, ocr, and bala bala trash
9 this rom does not allow manua input for apn (so i guess the default apn are set for china unicom or china mobile) some people report time doesnt sync but it seems to be working
###
heres some screen shot by author
Is this rom based on motoroi like wanhu? how about the haptic feedback, tv-out and other features of wanhu, are those things supported in this rom?
Man too much stuff going on for XT720..!
I think this one will be on hold as all our Devs are working simultaneously working on 2 ROMs as of the moment.. But i would be interested on how this differs from the other ROMs that we've had..
like another version of wanhu 2.2.1 rom, haptic feedback is working good, havent try tv out dont have 3.5mm cable here
dont have pre-installed keyboard and fc on market whenever i try to run it
korean ocr
claim fm radio is working but i didnt try it
media button is working and switching between camera and video recorder normally
number format in dialer is correct but does not support ussd
dannyfly said:
download link http://www.kat-intl.com/Bravo2.2-V1.1.rar can someone please make a mirror i'll del this file tonight
Click to expand...
Click to collapse
Haven't tried it yet, but I re-uploaded it here:
http://www.multiupload.com/O42Y6D8EMN Edit: This is now old version (v1.1)
Interested to see if any modifications of Settings menus have been done in this one vs. Wanhu's - like if the SKT menus are gone.
dannyfly said:
like another version of wanhu 2.2.1 rom, haptic feedback is working good, havent try tv out dont have 3.5mm cable here
dont have pre-installed keyboard and fc on market whenever i try to run it
korean ocr
claim fm radio is working but i didnt try it
media button is working and switching between camera and video recorder normally
number format in dialer is correct but does not support ussd
Click to expand...
Click to collapse
How about the performance and speed? in comparison with wanhu and cm6 rom? what do you think?
How about telephony from SKT Mobile?
USSD? APN settings in settings.apk?
"included motoblur launcher"
Ported to non-motoblur or just HeLauncher with the MotoBlur-skin?
abet1017 said:
How about the performance and speed? in comparison with wanhu and cm6 rom? what do you think?
Click to expand...
Click to collapse
its very fast since it only got minimal apps installed, theres no market, g search, g map
i have tried cm6 yet but i think the speed it's same as wanhu
fjfalcon said:
How about telephony from SKT Mobile?
USSD? APN settings in settings.apk?
Click to expand...
Click to collapse
no apn in setting, just like wanhu rom
number format is fixed but still ussd not supported
Vistaus said:
"included motoblur launcher"
Ported to non-motoblur or just HeLauncher with the MotoBlur-skin?
Click to expand...
Click to collapse
its ported non-motoblur
There is a new version of this ROM out for anyone interested, see original link in OP. I did end up trying this briefly before, I will give it another shot this weekend I think.
Maybe some changes can even be merged with XDA Special.
From what I understand the "T Roaming" menu was removed/changed - this is something I asked about when we first started working with WanHu ROM.
Also a message I get all the time about network time not being set has been removed.
And there is mention of the radio volume being fixed.
Not sure what else has changed ....
R-D said:
There is a new version of this ROM out for anyone interested, see original link in OP. I did end up trying this briefly before, I will give it another shot this weekend I think.
Maybe some changes can even be merged with XDA Special.
From what I understand the "T Roaming" menu was removed/changed - this is something I asked about when we first started working with WanHu ROM.
Also a message I get all the time about network time not being set has been removed.
And there is mention of the radio volume being fixed.
Not sure what else has changed ....
Click to expand...
Click to collapse
Does this rom work on wind?
R-D said:
There is a new version of this ROM out for anyone interested, see original link in OP. I did end up trying this briefly before, I will give it another shot this weekend I think.
Maybe some changes can even be merged with XDA Special.
From what I understand the "T Roaming" menu was removed/changed - this is something I asked about when we first started working with WanHu ROM.
Also a message I get all the time about network time not being set has been removed.
And there is mention of the radio volume being fixed.
Not sure what else has changed ....
Click to expand...
Click to collapse
have you checked ussd query?
S7icky said:
Does this rom work on wind?
Click to expand...
Click to collapse
Yes.
fjfalcon said:
have you checked ussd query?
Click to expand...
Click to collapse
Don't know of any Wind Canada supported codes to try. Not something we normally use.
Just try to send *100#.
If it will try to call -then ussd not working, if will be "sending ussd" message - than working.
Btw, can you mirror it, cause i can't understand chinese symbols on registration...
From China i downloaded version 1.3 + themes. Not tested!
Good luck. Download it here:
ROM:
http://www.ulozto.cz/10134568/bravo2-2-v1-3-rar
Themes:
http://www.ulozto.cz/10134569/froyo-theme-zip
http://www.ulozto.cz/10134570/touchwiz-theme-zip
http://www.ulozto.cz/10134571/xperia-theme-zip
http://www.ulozto.cz/10134572/gingerblur-theme-zip
fjfalcon said:
Just try to send *100#.
If it will try to call -then ussd not working, if will be "sending ussd" message - than working.
Btw, can you mirror it, cause i can't understand chinese symbols on registration...
Click to expand...
Click to collapse
I couldn't finish the registration in Chinese before either, luckily someone helped then too.
I will give it a try this weekend if nobody has checked before then.
R-D said:
I couldn't finish the registration in Chinese before either, luckily someone helped then too.
I will give it a try this weekend if nobody has checked before then.
Click to expand...
Click to collapse
Usually you can press the button on the bottom right of the "touch the big green alien" screen to select language.
Hello, I was just wondering if there was a flashable apn list / fix? Some roms don't have the Bell APN's loaded, and having something flashable through recovery would be super easy. For some reason I can't manually configure apn's very well.
If you search the Cherryπ ROM forum, Navalynt at one point posted the entire APN lists.
~ Sent from My Unlocked, Rooted, Faux 1.3 gHz, CM7 Atrix 4G ~
drvon said:
Hello, I was just wondering if there was a flashable apn list / fix? Some roms don't have the Bell APN's loaded, and having something flashable through recovery would be super easy. For some reason I can't manually configure apn's very well.
Click to expand...
Click to collapse
Thread needs to be in q&a section.
Don't remember where I found it but here you go.
EDIT: just noticed you asked for Bell, this is AT&T's . Perhaps you can try resetting to default under APNs......
http://forum.xda-developers.com/attachment.php?attachmentid=796952&stc=1&d=1322416588
Thanks found it!
I have enabled native dialer by modifying framework-res.apk in my Nexus 7 3G with JB 4.2.1.
Now my question is, will the native dialer stay if i upgrade to 4.2.2? Did anybody try? Pls share. Thanks a lot.
Are you on a custom ROM?
No, I simply downloaded a dialer-enabled framework-res in this forum and replaced the original one.
btw, is there any place to download dialer-enabled 4.2.2 framework? I had trouble doing this myself
thanks in advance!
Can you post up your framework-res? I will make the small edit for you. As I understand it, it is just a bool edit "<bool name="config_voice_capable">false</bool>", where you change false to true.
hlxanthus said:
Can you post up your framework-res? I will make the small edit for you. As I understand it, it is just a bool edit "<bool name="config_voice_capable">false</bool>", where you change false to true.
Click to expand...
Click to collapse
Hi hlxanthus,
Attached is the framework-res.apk from 4.2.2. Really appreciate if you can help!
Thank you!
Here are some flashable packages, that will work for you within twrp or cwm recoveries. If you would rather you can just crack them open to pull the apk out. One has the one I modded and the other is the original you posted up. Please know that this will ONLY work with the rom you pulled the framework-res from. So if this is a stock apk, then that is all you can use this with.
Please note, that while this should give you access to the dialer, it will not magically enable phone calls on your device (that I know of atleast, let me know if I am wrong LOL). You will still have to use a VoIP service like GrooveIP for example to route said phone calls thru your wifi and 3G radios.
Download - 4.2.2.dialer_enabled.framework-res.tilapia.zip
Download - 4.2.2.restore_framework-res.tilapia.zip
I clicked the system update button and reboot....
But it didn't update successfully and stopped in the middle of the upgrade.
I was asked to reboot and I am still in 4.2.1.
Any idea why? The whole process took only a minute or so.
Is it because mine was rooted?
ingg said:
I clicked the system update button and reboot....
But it didn't update successfully and stopped in the middle of the upgrade.
I was asked to reboot and I am still in 4.2.1.
Any idea why? The whole process took only a minute or so.
Is it because mine was rooted?
Click to expand...
Click to collapse
Might be. Other modifications have you made? You might need to flash a stock recovery back in place at the very least.
Native dialer
Hi there,
I have a Nexus 7 Wifi only and i would love to have the stock dialer to use my SIP account.
Can i flash the file here in this thread?
I'm on Paranoid ROM 3 (4.2.2).
Thks
I have found several values to change based on what I found in the stock APN settings for Boost Mobile that have allowed me to send SMS over 4g while on boost mobile network.
First make sure you have flashed moped_ryder universal boost apn fix.
At the bottom of your build.prop change the following settings.
ro.cdma.home.operator.numeric=310000
ro.cdma.home.operator.alpha=Chameleon
ro.telephony.default_network=10
telephony.lteOnCdmaDevice=1
Notice that on the last line you will only be correcting a typo.
Do not change APN from moped Ryder's fix
zaduma said:
I have found several values to change based on what I found in the stock APN settings for Boost Mobile that have allowed me to send SMS over 4g while on boost mobile network.
First make sure you have flashed moped_ryder universal boost apn fix.
At the bottom of your build.prop change the following settings.
ro.cdma.home.operator.numeric=310000
ro.cdma.home.operator.alpha=Chameleon
ro.telephony.default_network=10
telephony.lteOnCdmaDevice=1
Notice that on the last line you will only be correcting a typo.
Then in /system/etc replace the apns-conf.xml file (back it up first) with the one I have attached that is pulled from Stock Galaxy S5 for Boost Mobile. Reboot, and you are finished.
Click to expand...
Click to collapse
I'm guessing this is for using a rom like lineage? Does this change allow mms as well? That's the only reason I'm not on one of them. I need mms.
I am using aokp mm. And yea, MMS is working. I wasn't even trying to fix that issue just happened to notice the different values. It's now working perfectly.
zaduma said:
I am using aokp mm. And yea, MMS is working. I wasn't even trying to fix that issue just happened to notice the different values. It's now working perfectly.
Click to expand...
Click to collapse
Hmm. I tried those steps on cosmic and I still can't send SMS or MMS. I'll try and see if lineage works. I flashed the APN fix. Made the build prop changes and replaced the config file you posted. I really liked this ROM too. But need SMS and MMS. It's the only thing keeping me on stock.
Nevermind. I can send MMS just not SMS. Now my girlfriend is wondering why I sent a funky image and can't tell her it was a test. Lol!
Kreatur3 said:
Hmm. I tried those steps on cosmic and I still can't send SMS or MMS. I'll try and see if lineage works. I flashed the APN fix. Made the build prop changes and replaced the config file you posted. I really liked this ROM too. But need SMS and MMS. It's the only thing keeping me on stock.
Nevermind. I can send MMS just not SMS. Now my girlfriend is wondering why I sent a funky image and can't tell her it was a test. Lol!
Click to expand...
Click to collapse
I am sorry you do not need to change the apns conf file. I have removed it to prevent further confusion. But I am not sure what would be different between cosmic and aokp but I have working SMS/MMS/data/calls.
Cosmic is Android 7 while I have this working on 6. That may be the difference.
zaduma said:
I am sorry you do not need to change the apns conf file. I have removed it to prevent further confusion. But I am not sure what would be different between cosmic and aokp but I have working SMS/MMS/data/calls.
Cosmic is Android 7 while I have this working on 6. That may be the difference.
Click to expand...
Click to collapse
Yeah figured it might be due to the android version. I'm going to try these steps on aokp n and see if it works. If not I'll switch to aokp mm.
Update: I can now confirm that thus doesn't seem to work on nougat ROMs. At least it didn't on cosmic or aokp. I'll go with aokp mm. I'm super excited to use any non stock ROM at this point. Thank you for sharing this information.
It's no problem, I was having a different issue with data connectivity being disabled at random with a reboot being the only fix. I'm still having that so I went back to stock.
Im having issues with boost Mobile apn too.. Though i got sms,mms,data working on resurection remix 7.1.2 rom by just flashing the apn fix ..sms wont send if i restart my phone ..it remains on sending unless i make a call n hangup right away...weird... But i cannot get data, sms, or mms to work on cosmic rom, dreamux havint tried lineage...but i was really liking the way cosmic n dreamux rom looked.
I am having issues with Fredompop, since it looks like you have dived into the APN side of things, do you know how to view the stock APN settings in the stock rom? If I update the PRL in the stock rom it works fine. So I am guessing I just need to copy the settings to lineage.
The stock rom grays out the APN settings though so I can't view them.
Any way to view them or back them up?