Related
I initially installed 2.2 leaked version. Now how do I officially move to ota version? There's just too much info out there and its confusing. I don't want to brick my phone so I an just scared. Also, I didn't see a how to for this when I searched.
Thanks in advanced.
Sent from my DROIDX using XDA App
I'm new to android but as I understand you have to flash back to 2.1 and and be sure you haven't installed themes or deleted factory apps then you can install the OTA froyo
Sent from my DROIDX using XDA App
if you are running the 2.3.15 leak than you have the same system as the ota. the only thing you dont have is the kernel (which is said to not have any significant changes), a changed bootloader with no improvments other than to try and lock the phone down more, and an updated baseband which is a minimal update and you dont need if you don't have any signal issues. That being said heres your answer
You need to use rsd lite and the 2.1 .sbf file to restore your phone to stock 2.1 then you can update. If you made a backup of you 2.1 system you can restore it AFTER using the 2.1 .sbf file. or you can re enter your stuff again.
after you have 2.1 with stock (i beleive rooted is fine but not sure) you can then got to settings, about phone, check for updates and download the update and install it.
At this time i don't think there is an easier way or direct way to go from leak to ota. I would suggest you use titanium backup or some other backup to backup all your apps and data so you can restore them once your on OTA 2.2 and rooted. remember not to restore any system files or apps (example: text messages or accounts) it will cause constant sync icon in notification and only way to remove is to wipe and start over.
Im on the original leaked 2.3.9. Can I just flash the 2.3.15 leaked update.zip and be done with it? Or will I still have to flash 2.1 and update?
I havent removed any bloatware or any thing else. Just 2.3.9 stock rooted.
Thanks guys for the directions.
megaman81 said:
Im on the original leaked 2.3.9. Can I just flash the 2.3.15 leaked update.zip and be done with it? Or will I still have to flash 2.1 and update?
I havent removed any bloatware or any thing else. Just 2.3.9 stock rooted.
Thanks guys for the directions.
Click to expand...
Click to collapse
install the 2.3.15 leak and your good to go.
Any help is appreciated, I'm still fairly new with Android, but trying to learn my way around.
When the OTA update for 2.2.1 came out, I decided to do a factory reset because I'm just picky like that, and I like to be fresh coming out of OTA updates. Prior to the factory reset, I was running stock 2.2, though I was rooted using the manual (D2) method through adb, I had bloat frozen with Titanium Backup, and I had Droid X Bootstrap installed.
I unfroze the bloat and did the 2.2.1 update prior to factory reset. I did not unroot prior to the OTA. After the OTA I did a factory reset. I expected the bootstrap to go as well. It didn't, and I noticed immediately because I was booting into its recovery every other reboot because I was no longer rooted.
I still had the superuser icon (ninja) in the app drawer, however was no longer rooted of course, so I loaded z4root and let it "unroot" me, and then let it root again, which fixed the Bootstrap recovery issue.
Here's my problem. Obviously the factory reset did not wipe everything because bootstrap was still trying to load. My phone is definitely more sluggish than it was prior to the factory reset. Different types of screen lag are very noticeable and the phone really lags later in the day if I don't reboot. I loaded less apps after the reset than I had prior to, but otherwise did nothing different. I want to try to remove the bootstrap too, as well as anything residual to try to figure this out, even if I do have to factory reset again, because it's definitely not stable the way it is. Is it possible to remove it, and how so?
I'm aware that this may not fix the problem, and to me it doesn't even make sense that it would, but I definitely feel something "off" here and for my own peace of mind I'd like to remove it at least for now just to see. I've done factory resets before and the phone always feels much snappier once it's back up and running. This time it's worse than when I started.
Any assistance would be greatly appreciated.
You would have to flash a stock sbf. Correct me if I am wrong but I think that stands for system boot file. That should take care of everything. I am sure u can find the thread on the forum on how to do it. Just to mention I think that all the boot strap does is hijack your normal boot process by interrupting it allowing u access. It doesn't actually replace the boot process.
Sent from my DROIDX using XDA App
Info on the bootstrapper can be found here:
http://www.koushikdutta.com/2010/08/droid-x-recovery.html
Basically it replaces the logwrapper.bin file which gets executed very early in the boot process. This allows bootstrapper to control the rest of the boot sequence.
To *just* remove bootstrapper, I think there is a backup of the original logwrapper executable stored in /system, so you could just replace the exploited version with the original.
However, if you are having issues, I would suggest you just go ahead and flash back to complete stock:
http://rootzwiki.com/index.php/Main-Page/Droid-X-Full-2.2-SBF.html
Make sure you are still on the 2.3.15 version before using this. Once you take the OTA (to 2.3.340) I don't think this SBF will work any longer.
So the sbf flash method wont work if u took the update?
Sent from my DROIDX using XDA App
sorry to hijack this thread. But I am having major issues with bootsrap. I accidently moved it from my sd card to internal storage. How do I move it back. It wont allow me.
crxin said:
So the sbf flash method wont work if u took the update?
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
The .340 update "upgrades" your bootloader to 30.04. I've read that the 2.3.15 SBF will not work with this bootloader.
There are some SBF files produced by Team Black Hat (at Leaked 2.3.320 and patch files to put you to 2.3.340), but I've not used them.
I think you can find more info on those at mydroidworld (or you can support TBH by buying their app in the marketplace and downloading direct from there)
jaynyc22 said:
sorry to hijack this thread. But I am having major issues with bootsrap. I accidently moved it from my sd card to internal storage. How do I move it back. It wont allow me.
Click to expand...
Click to collapse
I'm not sure what you mean?
Try uninstalling from Manage Applications and re-install?
Do you mean the DroidXBootstrapper UI or the logwrapper exploit?
Hey guys, just sharing this with everyone. Maderschramm over at droidforums and droidxforums has packaged an update zip for 2.3.340. It can be used as an alternative to SBFing or to update you if you haven't already.
Install- Make a backup first
1. Download zip
2. Boot into clockwork recovery
3. Install zip from sd
4. Reboot
5. Activate phone
IMPORTANT
BE SURE TO REBOOT AFTER INSTALLING ZIP. DO NOT DO ANYTHING ELSE IN CLOCKWORK RECOVERY PRIOR TO REBOOT. YOU WILL BRICK.
You will lose root, but you will also still have all apps and contacts.
Read this thread prior to doing the install. There's some helpful tips from Maderschramm.
http://www.droidxforums.com/forum/droid-x-hacks/15666-maderstcok-ota-2-3-340-update-zip.html
Mirror 1
http://ubuntuone.com/p/XAk/
Mirror 2
http://www.megaupload.com/?d=4AO672L1
good find. I am going to download and store away for a rainy day ota update. I hate sbf and rsdlite. And although I appreciate all that the black hat does - having to do like 20 (exaggeration) installs in clock work makes me a little nervous.
so good on ya mate.
that's why after i SBF 2.3.320 i always go straight into Android recovery before booting up and Factory Reset there, then boot up. But i guess everybody has there own way of doing things.
Ya, this is an easy alternative to get everyone to a clean 2.3.340. If you're on 2.3.15, 2.3.320, or 2.3.340 this will definetly come in handy.
Wonderful. I just left a stock rom literally today and realized I lost corporate email access with Gummy. That is a deal-breaker and obviously I didn't research it well enough before doing it. I NEED to get back to stock regardless of how painful it is. So this will unroot me, just Z4 again afterwards I take it?
Correct it will unroot and remove bootstrap. So after rebooting then use z4 and grab bootstrap again.
Very nice, thank you! Hopefully I never need to use it!
Sent from my DROIDX using XDA App
Hopefully we wont need to use it, but at least we will feel better about doing this rather than an SBF.
Droid-Xer said:
Ya, this is an easy alternative to get everyone to a clean 2.3.340. If you're on 2.3.15, 2.3.320, or 2.3.340 this will definetly come in handy.
Click to expand...
Click to collapse
I don't know about 2.3.15 When I did it on that, I bricked and ended up having
to SBF to .320 and using the patches to get to .340
forever29 said:
I don't know about 2.3.15 When I did it on that, I bricked and ended up having
to SBF to .320 and using the patches to get to .340
Click to expand...
Click to collapse
Reasons for bricking:
Installing zip as an update.zip
Doing anything else in bootstrap after installing zip
Soft brick (factory reset will bring it back)
Thanks This has saved me more than once while working on cracking the bootloader
Hrmm I ran this directly from having Apex and it didnt like it. Seemed to not fully wipe the phone at all. Im guessing I didnt read something all the way. I simply went to clockwork and loaded the file and rebooted. When it came back my system was still intact, but everything was force closing.
r3dlined said:
Hrmm I ran this directly from having Apex and it didnt like it. Seemed to not fully wipe the phone at all. Im guessing I didnt read something all the way. I simply went to clockwork and loaded the file and rebooted. When it came back my system was still intact, but everything was force closing.
Click to expand...
Click to collapse
Doing a factory reset seemed to put it back to normal
It will update or bring you back to clean 2.3.340. You will lose root and bootstrap, but you will keep all apps and setup.
does anyone have any alternate DL links? it keeps hanging no matter which link I use.
Got it going. Honestly though, who uses Megaupload anymore?
Sent from my DROIDX using XDA App
i won't try to install until file size matches
r3dlined said:
Hrmm I ran this directly from having Apex and it didnt like it. Seemed to not fully wipe the phone at all. Im guessing I didnt read something all the way. I simply went to clockwork and loaded the file and rebooted. When it came back my system was still intact, but everything was force closing.
Click to expand...
Click to collapse
You didn't wipe cache and factory reset before install
Sent from my DROIDX using XDA App
If you don't wipe data/cache prior to install then you will have the same setup and apps, only you will have lost root and bootstrap. If you want a clean start then wipe data/cache then install zip.
WOW Droid X saver
Man this saved my Droid X from sure bricking, thankyou very much uploader
So I originally rooted using SuperOneClick, then I got an OTA that broke root. I then found gingerbreak and rooted using that method. I have done a few cool things, like change the boot animation and lock/unlock sounds, enabled sideloading, etc.
Anyway...
With rumors and speculation about Gingerbread coming out in the coming months (hopefully), I am wondering if the boot animations, lock sounds, and/or SuperUser access will deny the OTA from installing. Is it a good idea to return the ROM to stock to avoid any bugs?
Second,
Specifically on the Atrix, if I performed a factory reset, I assume I won't lose root access, but would I lose the boot animations, and lock/unlock sounds? Let's say I wanted to return it to a 100% stock ROM (un-root, stock boot animation, EVERYTHING) before the 2.3 update comes, how would I do it? I feel as though if I perform an OTA with the mods I've done to it, some unknown bugs/issues would appear (I've seen PLENTY of bugs as is). Can anyone shed some light on this? Call me paranoid, but I've seen too many software issues with this phone, and I'm hoping 2.3 will address them, and I hope I don't introduce any new bugs by updating a modded phone.
You should definitely go back to stock. I doubt that you'll even be prompted if you're rooted, so you won't get the update to Gingerbread. Instructions to return to stock can be found on Motorola's website, by Googling, or from Android Central.
If I do a hard reset using Android Recovery, will that effectively unroot and restore EVERYTHING to the factory image? I know if I do a soft reset through the OS, I will still have root access. I realize I can just unroot using SOC, but there have been issues where busybox is still installed along with the superuser icon, even though the phone doesn't have root access. I just want a clean slate.
rytymu said:
If I do a hard reset using Android Recovery, will that effectively unroot and restore EVERYTHING to the factory image? I know if I do a soft reset through the OS, I will still have root access. I realize I can just unroot using SOC, but there have been issues where busybox is still installed along with the superuser icon, even though the phone doesn't have root access. I just want a clean slate.
Click to expand...
Click to collapse
Try this.
Motorola
brewstermax said:
Try this.
Motorola
Click to expand...
Click to collapse
I have 4.1.83, and this will not work for it.
I would be interested in learning more about this too
Sent from my MB860 using XDA Premium App
This is a thread I commented on over at the Motorola forums. I actually got the forum manager to comment on the issue:
"rytymu
What do I do if I'm on 4.1.83 and want to return to stock (rooted)? The software given just says my device is up to date...
Mark (Forums Manager)
With next update/upgrade you will go up to next stock version. You have to
wait til then.
rytymu
So if I understand right:
I most likely will not get an OTA notification because of the root access, so when I run the Motorola Software Update program after the next update comes out, it will then flash a 100% stock image as if I just pulled it out of the box? This includes removing/wiping busybox, root access, boot animations, and EVERYTHING else?
Mark (Forums Manager)
If you are on 4.1.83 but modded you will get ota notification but will
likely fail on install. If MSU is made available you can update /upgrade to
that version. Root and other sideloaded things will be removed. Stock ATRIX
Att software. Not AOSP Android."
I guess this is what I'm looking for, unless someone interprets otherwise...
brewstermax said:
You should definitely go back to stock. I doubt that you'll even be prompted if you're rooted, so you won't get the update to Gingerbread. Instructions to return to stock can be found on Motorola's website, by Googling, or from Android Central.
Click to expand...
Click to collapse
OTA update should be fine if you have not deleted any of the original Moto files/bloatware, or leave any of the original Moto bloatware frozen. The updates only throw up at you when there are missing or frozen Moto apps and/or files.
If you are on 4.1.83, (or any firmware), and rooted only, you will get the update fine, but will lose root.
If you have flashed for example GladiAtrix, you will more than likely have to flash back to stock first.
If you have rooted on any version and then frozen any apps, thaw those apps and you will update fine, but again lose root.
Every time you update you lose root.
So I have frozen all bloat, but I did uninstall swype and reinstall a newer version. Is this going to be a problem for the next ota? Am I going to have to do a fresh sbf flash or is there a way to reinstall the stock version of swype? I'm not sure I still even have that file...
Sent from my MB860
beazie0885 said:
So I have frozen all bloat, but I did uninstall swype and reinstall a newer version. Is this going to be a problem for the next ota? Am I going to have to do a fresh sbf flash or is there a way to reinstall the stock version of swype? I'm not sure I still even have that file...
Sent from my MB860
Click to expand...
Click to collapse
If you installed a newer version of the same Swype, this should I imagine be the same as updating Swype. I'm thinking this would allow you to just unfreeze all the bloatware and update OTA. Only thing I can think of is that you try the OTA when it's available, and if it balks at you, flash back to stock.
I just followed another thread on XDA, and flashed to 1.26. After about 40 minutes, I had a fresh install. I then did a factory reset, as I was told that some user data and caches aren't touched by flashing (?). I did it just for good measure. I then went into the menu and updated to 4.1.57. I was tipped off (in an above post, actually) about some Motorola Softare Update program that will flash you from 4.1.57 to 4.1.83. The forum manager at Motorola instructed to do this to basiclly restore your phone if you had modified it (to clear the OTA check). Again, just for good measure, I used this to flash from 4.1.57 to 4.1.83 to be 100% sure I had a bone-stock phone.
Sent from my MB860 using XDA App
rytymu said:
I just followed another thread on XDA, and flashed to 1.26. After about 40 minutes, I had a fresh install. I then did a factory reset, as I was told that some user data and caches aren't touched by flashing (?). I did it just for good measure. I then went into the menu and updated to 4.1.57. Now, I'm actually in the "soak" beta feedback over at the motorola forums, and I was tipped off (in an above post, actually) about some Motorola Softare Update program that will flash you from 4.1.57 to 4.1.83. The forum manager instructed to do this to basiclly restore your phone if you had modified it (to clear the OTA check). Again, just for good measure, I used this to flash from 4.1.57 to 4.1.83 to be 100% sure I had a bone-stock phone.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
The Moto Software Update is not needed, and Mark, or whoever over on the Moto forums did not "tip" you off to this. This is no secret, and is well known. (BTW, you are breaking the NDA just by saying you are in beta, (soak feedback forums are down in any event as they are always taken down between betas), but that's another story, and being in beta doesn't make you more knowledgeable either).
You have made this sound more complex than it is.
To go back to stock (and the instructions are all over the forums BTW) --->
Flash 4.1.26, OTA to 4.1.57, OTA to 4.1.83!..............Done!
Or ------------>
Flash 4.1.57 sbf, OTA to 4.1.83!..................Done!
People who were having the OTA notification issues, (continually popping up), were those who flashed the 4.1.83 sbf which is floating around, and that's why they were told to flash 4.1.83 through the Moto Update portal.
(Edited above statement)
Sent from my MB860 using XDA App
What's going on guys? I've had my Play for a while and for the most part I love it...def could be faster but thats ok.
So, the problem. I'm rooted, but stock rom and kernel. I was using go launcher, go sms and have alot of apps, a 32gb sd card thats almost full. I installed go locker a couple nights ago and it was running great. Then, the next day, I have no clue if it relates to go locker...but now my phone is like on life support or something!
75% of apps force close upon opening, the phone is deathly slow if it doesnt close...like I'll open up "settings" and it will either FC or take 2 minutes to load up...then it loads and I click something and it FCs. SOMETIMES an app will open fine, play fine. Like muffin knight, sometimes it opens and plays 100%. other times it instantly FCs over and over. Every single app no matter how complex is subject to the same problems in the same way.
I honestly have no clue wtf is wrong. It feels analgous to a computer virus. Everything is bogged and broken. I tried cleaning my phone. I uninstalled every launcher and theme app, and then uninstalled about a dozen apps I dont use alot. I left mself with the bare minumum....Id then open the "messaging" app and it would crawl open to greet me with a force close. It doesnt seem to be a problem with any specific app.
I checked battery use....very normal stuff. I don't know whats going on!! but my phone barely works....someone will call and it will take 10 seconds for me to be able to slide the slider and accept the call...
Anyone have any direction for me? I don't want to flash any kernels or roms yet (waiting for 100% stability) and I'm busy right now w tests and I just want my phone back to how it was a few days ago. I'm using adw launcher now and its the same as with the go launcher or without anything....slow, force closes everywhere, hang ups everywhere...
thanks SO much for any help from anybody...I really appreciate it.
What device are you running? R800x? R800i?
Is your bootloader unlocked? What firmware/android version are you on?
Sent from my R800x using XDA App
Leraeniesh said:
What device are you running? R800x? R800i?
Is your bootloader unlocked? What firmware/android version are you on?
Sent from my R800x using XDA App
Click to expand...
Click to collapse
r800x, unlocked bootloader through hardfix with Alejandrissimo....and most current Verizon firmware so 2.3.4 (right?)
since I rooted it I haven't messed it with it much, just took the liberty of using apps like root explorer and stuff
Dyelon said:
r800x, unlocked bootloader through hardfix with Alejandrissimo....and most current Verizon firmware so 2.3.4 (right?)
since I rooted it I haven't messed it with it much, just took the liberty of using apps like root explorer and stuff
Click to expand...
Click to collapse
If you have CWR installed I'd try to wipe the cache and dalvik cache. I've had weird things like that happen and wiping them fixes it.
Sent from my R800i using Tapatalk
Clienterror said:
If you have CWR installed I'd try to wipe the cache and dalvik cache. I've had weird things like that happen and wiping them fixes it.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
I don't think I do....I'm really noob when it comes to the in depth rooting stuff but I don't even think I have a nandroid backup...
I can boot to that orange screen and I did save my state when I initially rooted...
How do I clear the caches for that stuff? Davlik, can that be done thru titanium backup?
and what about the other cache? How do I see if I have clockword recovery? (I never intentionally installed it so I don't think I have it?)
Okay so I wiped the davlik cache (like 24mb) thru titanium backup....and then I reinstalled the market (one of the more troublesome apps to open)...and then rebooted.
Tried opening a few apps in succession upon boot, and for the first time ever the phone froze and rebooted itself!
What the hell is going on?? Lol my phone was fine a few days ago and now its just insufferable!!
Any more ideas as to whats going on?
I never dled clockwork mod so I don't think I can wipe that cache?
Deleting dalvik-cache via Titanium Backup only deletes "unneeded" caches. You need to delete every dalvik-cache by going into data/dalvik-cache and deleting every file in it. Then reboot, which will rebuild the caches (first boot will take a while)
jacklebott said:
Deleting dalvik-cache via Titanium Backup only deletes "unneeded" caches. You need to delete every dalvik-cache by going into data/dalvik-cache and deleting every file in it. Then reboot, which will rebuild the caches (first boot will take a while)
Click to expand...
Click to collapse
I deleted every file in the davlik cache folder...rebooted.
No change. Takes 10 seconds to open the phone...everything is slow/force closing.
Sigh. My phone is possessed and/or dying.
Then I suggest backing up your user-apps (if still possible) and doing a factory reset
Do a nandroid backup, then factory reset. Then install apps one by one testing for stability after each. If an app is causing problems that will identify it. Or provide us with a list of your apps and we could help determine if one of them may be the culprit.
jacklebott said:
Then I suggest backing up your user-apps (if still possible) and doing a factory reset
Click to expand...
Click to collapse
Wouldn't factory reset erase my root? Or no?
I paid for that root haha that would be disappointing
Dyelon said:
Wouldn't factory reset erase my root? Or no?
I paid for that root haha that would be disappointing
Click to expand...
Click to collapse
I assume you paid to unlock the bootloader (reset does nothing to this). Root is much more easily obtained
http://forum.xda-developers.com/showthread.php?t=1312859
It won't. factory rest doesn't wrote the system partition where root is located.
Factory reset.
Please dont be scared of losing root, just use the search bar and type in doomlord zergrush. His script has to be the easiest most automated way to get root on any xeria firmware ever
TheCraig said:
Factory reset.
Click to expand...
Click to collapse
Just want to thank you guys alot. I backed up everything i cared about in Titanium and did a factory reset...everythings running 100% now and I have all my apps back in place...
I really appreciate the help