mt htc p3452 is not starting properly.i have upgraded its rom after flashing its cid.first tym it is working properly but after one restart it is showing only smart mobility and then it shuts down.....what to do now????????? big prblm..plss help....
dude even i'm havin the same problem....
amitav said:
mt htc p3452 is not starting properly.i have upgraded its rom after flashing its cid.first tym it is working properly but after one restart it is showing only smart mobility and then it shuts down.....what to do now????????? big prblm..plss help....
Click to expand...
Click to collapse
alanjayakar said:
dude even i'm havin the same problem....
Click to expand...
Click to collapse
How can you get help if you don't state all the info available like:
what did you do step by step until you got bricked?
what kind of cid unlock you used?
what rom you flashed?
tito12 said:
How can you get help if you don't state all the info available like:
what did you do step by step until you got bricked?
what kind of cid unlock you used?
what rom you flashed?
Click to expand...
Click to collapse
try resetting....by pressing.....red and green hard buttons togther with power button above....hope it will work.....
amitav said:
mt htc p3452 is not starting properly.i have upgraded its rom after flashing its cid.first tym it is working properly but after one restart it is showing only smart mobility and then it shuts down.....what to do now????????? big prblm..plss help....
Click to expand...
Click to collapse
try resetting....by pressing.....red and green hard buttons togther with power button above....hope it will work.....
sir i have htc touch p3450 (elf0100)....i had flashed itz original rom (wm6.1) using flashing tool(ELF_USPL-v1) and upgraded its rom to wm6.5 (onyx_6_release13).i just flashed it nd started upgrading tool nd it is successfully upgraded and i m enjoying my wm6.5 but when i switched it off to insert my sim card it does not start..it just displays "smart mobility" and then it gets off..now what to do?????
See this post just below yours http://forum.xda-developers.com/showthread.php?t=860121 and try the solution.
If I understand well he means to flash a shipped rom, then cid unlock, then a cooked rom.
Read this too http://forum.xda-developers.com/showthread.php?t=379318
Related
Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..
Hi all, im thinking of getting a Touch 3G (Jade) as a second phone, my first being a touch Diamond 2, and am thinking of buying one from E-Bay orange branded.
My question is if i get one, it seems i can get it sim unlocked easy enough, but once i get it sim unlocked can i dol the hspl and flash any rom i want as i have been doing with my diamond 2? Or will being originally a branded Orange one prevent me from doing this?
Thanks in advance.
You can easily SIM unlock it via ebay, i did it this way. And after that when you do HSPL you can put whatever ROM you want.
Thanks for the reply, yeah i thought that but i think i will get it unlocked by Olipro/Olinex from the link in the hard spl thread, i feel i could trust their service more
Hi again. Ok i have bought a Touch 3g that was Orange branded, i have purchased the sim unlocking utility from Olinex, got hard spl running and tried a few roms to see which suits me, but whichever rom i use i am still getting the Orange start screen before the rom loads up. Not to big a problem really but if possible i would like to remove it, any ideas guys n gals ?
Shambolicuk said:
Hi again. Ok i have bought a Touch 3g that was Orange branded, i have purchased the sim unlocking utility from Olinex, got hard spl running and tried a few roms to see which suits me, but whichever rom i use i am still getting the Orange start screen before the rom loads up. Not to big a problem really but if possible i would like to remove it, any ideas guys n gals ?
Click to expand...
Click to collapse
hi
i think it is called a bootloader screen their is a solution to change the same u need to search as i dont remember the thread look in windows development thread and development and hacking thread im sure u will find what u want
goodluck
I'm using an Orange branded Touch, after flashing a 6.5 rom it changed the boot picture to the HTC one, then I went back to a 6.1 rom because I like the start button at the top.
mitch1974 said:
I'm using an Orange branded Touch, after flashing a 6.5 rom it changed the boot picture to the HTC one, then I went back to a 6.1 rom because I like the start button at the top.
Click to expand...
Click to collapse
hi
u also have 6.5 with start button at the top chek tommys 1.7 series they have top start buttom
haree said:
hi
u also have 6.5 with start button at the top chek tommys 1.7 series they have top start buttom
Click to expand...
Click to collapse
Thanks for that, I think I'll try that and PDAVIET V31, they're both built on the same core, but each cook put their own touches on them.
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
almost 50 views and no help
somebody please help me out
Goshdarn invalid vendor id
megagprime said:
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
Click to expand...
Click to collapse
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
ookba said:
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
Click to expand...
Click to collapse
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
sorry about the late reply
i have tried the willow spl (that was my original path)
didn't work can get my spl hard lol
still need help, i think she is bricked
i got the ceda100 boot loader up and cant flash willow or cedar hard spl.... or anything and it doesnt even boot up into windows or anything anymore possibly shes a nice shiny brick
ariesq said:
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
Click to expand...
Click to collapse
hey i got another snap and am ready to flash again but dont really want another paper weight, all i really need help with is usb tethering that doesnt use pam/let my carrier know i am tethered....
i need internet connection sharing like my snap needs a hard spl
different computer, cables, compatibility modes, etc
nothing works
My friend
i have the exact same problem
Bieng researching for the past few days, spent hours on this
Did u find a solution?
I could really use some help right now
Thanks
Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Hi,
have you flashed a new ROM before ?
In this case its a Radio Problem -try to update to (min) version 2.10. 50.08_2
http://forum.xda-developers.com/showthread.php?t=611787
good luck
I have installed the new Flash from the offical HTC HD2 site but that was with the installler.
Do these work the same way??
Greets
Ben
you have to do a HardSPL before -than you can flash Radios via the SDcard-method and via CostumRUU (like the Installer from HTC)
read this TUT for futher questions:
http://forum.xda-developers.com/showthread.php?t=609477
Rupesh
bdiepeveen said:
Hello,
I have a major problem with my HTC HD2.
I checked the forum but i coulnd find a good answer.
The problem with my HD2 is that when i start it the screen stays white.
I can do a hard reset and even do a factory reset.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
but i dont know how i can fix this.
Worst case its bricked???
Any help is appreciated
Greets.
bdiepeveen
Click to expand...
Click to collapse
===================
Hi Friend,
I also had the same problem, i took it to HTC Service center and found problem in the motherboard, they replaced the motherboard and its working fine from me. (my device is under warranty )
bdiepeveen said:
The problem with my HD2 is that when i start it the screen stays white.
Click to expand...
Click to collapse
usually happens when you flash a cooked rom that needs a different radio.
I can do a hard reset and even do a factory reset.
Click to expand...
Click to collapse
factory and hard reset are the same thing.
But the phone wont boot up any furter.
I can get to the white red blue(or whatever colour it is)
Click to expand...
Click to collapse
red white and blue is 'bootloader'.
So, boot to bootloader, see what it says next to spl.
it says SPL-1.66.0000 XE
What can i do with that??
(Sorry for the obvious noob questions i'm new to the HTC HD2)
*************
Update :
oke i've gotten a bit further now.
I've installed HSPL
So now i must use a ROM suitable for my phone correct??
Agian sorry for the obvious question
**************
Update:
For some reason it booted fully ,
got the screen white screen with HTC then my provider screen that took a while then the screen turns black.
*remove please*
well i've manged to install HSPL,
and installed a ROM.
now the rom starts up but it shuts down after passing the HTC screen.
Rom i installed is Artemis NLD
I tried rebooting then i get the windows screen wich keeps on for a long while nothing happends
I have no idea what to do next
what radio do you have exactly?
and do you mean THIS rom?
thxx all..
samsamuel said:
what radio do you have exactly?
and do you mean THIS rom?
Click to expand...
Click to collapse
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
bdiepeveen said:
Yes thats the rom i installed,
Hate to ask this : where can i find which radio i use??
Click to expand...
Click to collapse
when the phone tries to start, do you get the small writing, bottom left?
there are three lines, one is the radio (i think the 'r' one, but im not sure, lol)
if you arent sure, you can always pick a radio from the ROM thread, he mentions three or four he tests with, get one of them and flash it from bootloader.
Hard reset dude....
Good luck...
oke my Radio rom is:
2.07.51.22.~2
So i need to flash the radio rom to a newer version?
I've got it working agian
I took the following :
Leo_RADIO_15.37.50.07U_2.10. 50.08_2
Atermis Rom
And now its working again
Thanks for all the assistance.
Just a quick question tough,
Wich rom would you advise??
glad its working. i won't recommend a rom,i recommend you try a few and see what works best for you.
hi guys,i've a problem with my htc touch. i tried to install a cooked rom,but now the phone doesn't work,when a try to switch on it,the words "smart mobility",but after few seconds the phone shut down,i've tried to send it on bootloader mode but without success,what should can i do =( ?
i'm sorry for my english but i'm italian lol thanks to all
Hi
Did you cid unlock your device before flashing a rom ?
tito12 said:
Hi
Did you cid unlock your device before flashing a rom ?
Click to expand...
Click to collapse
yes,in a first time the phone seemed to work,but on the windows rom screen it crashed,now,it doesn't go further the smar mobility screen =(
Try a hard reset, if not read this http://forum.xda-developers.com/showthread.php?t=406721 , I know it's a lot, but if your device is bricked you might find a solution.
By the way I'm near Verona on a vacation
tito12 said:
Try a hard reset, if not read this , I know it's a lot, but if your device is bricked you might find a solution.
By the way I'm near Verona on a vacation
Click to expand...
Click to collapse
i've tried hard reset too but nothing =( thanks for the link =) really? very beautiful city verona,i'm from como,in the north of italy,near switzerland =D
EDIT
ok i followed CyZeeK's guide (i can't post the link)
i found that my device id it's ELF010050 and the CID ID it's HTC__405 but i have 2 problems:
first,che only rom compatible with these ids it's for an elfin,when my phone it's an elf;
second,ruupdate sad that this elfin's rom it's corrupted (and it doesn't say that it isn't compatible =/ ),and now according to ruupdate all the rom's i downloaded are corrupted =/
what can i do??? thanks to all =)