Related
Is it possible to make a small program that allows to toggle charge on and off ?
as far as i know...charging our Diamond isnt nothing positive toward battery life .
I know you can enable or disable charging in system/power
but it would be awesome if someone would write small program/script to do that so we can place shortcut in programs menu to toggle
There is a setting that allows you to chose to charge or not to charge when synced.
Kueh said:
There is a setting that allows you to chose to charge or not to charge when synced.
Click to expand...
Click to collapse
He already mentioned that.
He's looking for some softkey or software/shortcut that can toggle that setting.
WhiteCell said:
as far as i know...charging our Diamond isnt nothing positive toward battery life .
Click to expand...
Click to collapse
As far as I know... it doesn't matter with actual batteries.
If I look at my notebook (which is over 2 years old) where I charge and uncharge all the time - the battery works still fine.
I'm not sure if it's worth the work - if the battery life sucks after a few month (years..?) - you just buy a new one for a few Euro/Dollar. (Man! You don't have an iPhone...lol)
I've never had a mobile phone for more than a year - so I wouldn't care!
(But I'm pretty sure the actual batterys don't care either!)
Li-Ion batteries don't suffer from the memory effect in the same way as Ni-MH batteries do, so theoretically it won't harm to charge the battery whenever you want to, regardless of it's charge level at the time. They do have a limited amount of cycles though, a cycle is when it goes from full charge to full discharge. It's eventually going to wear out no matter how you treat it.
salada2k said:
Li-Ion batteries don't suffer from the memory effect in the same way as Ni-MH batteries do, so theoretically it won't harm to charge the battery whenever you want to, regardless of it's charge level at the time. They do have a limited amount of cycles though, a cycle is when it goes from full charge to full discharge. It's eventually going to wear out no matter how you treat it.
Click to expand...
Click to collapse
so basically what your saying is Li-Ion batteries cannot over charge and then eventually start to decrease in total battery life?
If so, does that mean my T-mobile Wing's battery just crazy?
It would have exploded if it could "overcharge".
li-ion has a limited battery life by itself, which doesn't depend on usage/charging.
but charging can shorten the battery life if done wrong. charging cycles vary depending on how empty the battery was. it looks something like this: (see wikipedia/google for specific numbers)
95% 1000000 cycles
90% 100000 cycles
70% 10000 cycles
50% 1000 cycles
30% 100 cycles
10% 10 cycles
0% 0 cycles
actually you can never reach below 30% because the battery or phone will protect itself whenever that point is reached and turn itself off.
conclusion: charge whenever you can!
ps: li-ion for cars only discharge to 70%, so the battery can actually be used for longer than 2 years unlike a cell phone battery, where it can be discharged to 30%.
Guys, this is silly. The battery will work with no problems for 2-3 years. Then you can buy another one or, more probably, another phone. There is no point whatsoever to not charging it when connected to the computer. As a matter of fact, this will only reduce its lifetime.
Is it just me or everyone else that is experiencing a super long time in charging their phone to full battery? I am running the froyostone latest build and I have already followed all the guides in this forum to save battery life. The issue I am having is that it takes many hours to recharge the battery to full when connected to a wall charger.
It took 5 hours to go from 30% battery to 90%.
*no i wasn't charging the phone with the phone turn off*
Zythyr said:
Is it just me or everyone else that is experiencing a super long time in charging their phone to full battery? I am running the froyostone latest build and I have already followed all the guides in this forum to save battery life. The issue I am having is that it takes many hours to recharge the battery to full when connected to a wall charger.
It took 5 hours to go from 30% battery to 90%.
*no i wasn't charging the phone with the phone turn off*
Click to expand...
Click to collapse
I have a stock battery, which I can charge from 25% or less to 100% in about 30 minutes to an hour. I think there is something wrong with your charger.
its actually not taking that long, it probably got to 90% VERY quickly, you just checked on it later... they're false numbers... what you need to do is this; run your battery all the way down.. then charge it for about 1-2hrs, until it gets somewhere in the 90's then, while plugged in, shut the phone down, remove the battery, put the battery back in, boot up the phone (the phone should remain plugged in) then load up WM, load up android with the hard buttons backlight on, then once it boots you should show higher than what you had before (if not 100%) from this point android will remember your charge and you will be able to go to 100% all the time now. (until you load a new rom)
10507 said:
I have a stock battery, which I can charge from 25% or less to 100% in about 30 minutes to an hour. I think there is something wrong with your charger.
Click to expand...
Click to collapse
I got stock battery also. No idea why it taking so long.
javolin13 said:
its actually not taking that long, it probably got to 90% VERY quickly, you just checked on it later... they're false numbers... what you need to do is this; run your battery all the way down.. then charge it for about 1-2hrs, until it gets somewhere in the 90's then, while plugged in, shut the phone down, remove the battery, put the battery back in, boot up the phone (the phone should remain plugged in) then load up WM, load up android with the hard buttons backlight on, then once it boots you should show higher than what you had before (if not 100%) from this point android will remember your charge and you will be able to go to 100% all the time now. (until you load a new rom)
Click to expand...
Click to collapse
I have already tried this but still no luck.
10507 said:
I have a stock battery, which I can charge from 25% or less to 100% in about 30 minutes to an hour. I think there is something wrong with your charger.
Click to expand...
Click to collapse
What kernel are you using?
Sichroteph said:
What kernel are you using?
Click to expand...
Click to collapse
I am using hastarin r8 kernel, but I was experiencing the same issue with previous versions and the default kernel.
I just tested the charging rate by connecting my HD2 to a stock charger from HTC which I borrowed from a friend. Charging was a lot faster.
Since I bought my HD2 used, the charger that came with it, is not the stock charger from HTC.
But I still don't understand what is causing the charging to be very slow.
How to calculate charging time
Charging time = capacity of battery x 1,4 / charging current
HD2 stock battery= 1230mAh x 1,4 / 1000mA = 1,7 hours
Best
leehobin
Two things on charging batteries:
1) First, make sure none of the pins in the battery compartment is bent. This dramatically slowed charging for me once.
2) Android keeps battery stats in a file that gets loaded with your build. THese stats are often wrong. Be sure to fully charge under WinMo, then with power still attached, boot into Android. This will adjust some of the stats and charging in Android should be fine then. There's a thread somewhere on more details here if you want to tweak your stats. The battery slows down its charging when it gets close to the full state. If for some reason your charger thinks the temperature is getting too high or the state is getting near full it dramatically slows the charging rate. Both of these could be erroneous interpretations of the battery data. Also, if you have an extended battery, make sure to use a Kernel that is compatible with extended batteries, like Hastarin 7.x.
Zythyr said:
I just tested the charging rate by connecting my HD2 to a stock charger from HTC which I borrowed from a friend. Charging was a lot faster.
Since I bought my HD2 used, the charger that came with it, is not the stock charger from HTC.
But I still don't understand what is causing the charging to be very slow.
Click to expand...
Click to collapse
Not all chargers are built the same. Some usb charger provide more juice while others provide less. Maybe your non stock charger came from a non smart phone...
Zythyr said:
Is it just me or everyone else that is experiencing a super long time in charging their phone to full battery? I am running the froyostone latest build and I have already followed all the guides in this forum to save battery life. The issue I am having is that it takes many hours to recharge the battery to full when connected to a wall charger.
It took 5 hours to go from 30% battery to 90%.
*no i wasn't charging the phone with the phone turn off*
Click to expand...
Click to collapse
Current Widget from the Market can tell you how many mA your phone is getting when it's charging.
this is just an approximation formula. a lithium ion battery charger is more sophisticated than this. it first brings battery voltage up to 20% safely (because any voltage below this is the harmful zone of operation), then it stuffs the battery at full capacity upto 80%. then in the 3rd stage, the current drops linearly with time.
over the past year, my stock battery gives me the following profile:
20-80% -> 1 hour (800-820ma constant, unless phone is awake)
80-100% -> 1 hour (800 -> 0ma)
by 100% i mean 0ma charge current. not 100% on the battery icon. you should be aware that the battery is still charging even after the indicator reaches 100%. but the current is insignificant (10-20ma)
even though the charger is rated at 5v 1A, it supplies only 820ma current at the maximum. this is normal. also for a lion battery the safe operating regions are around 20-90%. by safe i mean prolonging battery life. this roughly corresponds to 3.6v - 4.0v. avoid overcharging your battery frequently.
also someone mentioned current widget as a good approximate tool to study battery performance. you might also want to delete batterystats.bin and condition your battery once (i.e. fully discharge and fully recharge). this will force android to re-determine the new 0% and 100% levels. search the android forums for this.
hope this helps.
leehobin said:
Charging time = capacity of battery x 1,4 / charging current
HD2 stock battery= 1230mAh x 1,4 / 1000mA = 1,7 hours
Best
leehobin
Click to expand...
Click to collapse
silenced3 said:
this is just an approximation formula. a lithium ion battery charger is more sophisticated than this. it first brings battery voltage up to 20% safely (because any voltage below this is the harmful zone of operation), then it stuffs the battery at full capacity upto 80%. then in the 3rd stage, the current drops linearly with time.
over the past year, my stock battery gives me the following profile:
20-80% -> 1 hour (800-820ma constant, unless phone is awake)
80-100% -> 1 hour (800 -> 0ma)
by 100% i mean 0ma charge current. not 100% on the battery icon. you should be aware that the battery is still charging even after the indicator reaches 100%. but the current is insignificant (10-20ma)
even though the charger is rated at 5v 1A, it supplies only 820ma current at the maximum. this is normal. also for a lion battery the safe operating regions are around 20-90%. by safe i mean prolonging battery life. this roughly corresponds to 3.6v - 4.0v. avoid overcharging your battery frequently.
also someone mentioned current widget as a good approximate tool to study battery performance. you might also want to delete batterystats.bin and condition your battery once (i.e. fully discharge and fully recharge). this will force android to re-determine the new 0% and 100% levels. search the android forums for this.
hope this helps.
Click to expand...
Click to collapse
wow ! thanks alot !
Is it bad to let my charge over night overnight? I thought it would stop charging when it got full to avoid overhanging.
Sent from my HTC Inspire 4G
Since I have access to a a battery simulator and charger... the best way to recondition a battery is:
1. Create a low battery scenario by lowering the input voltage to just a hair above 2.7 volts (I had to create a shim to get to the battery receiver leads).
2. Boot with full 4.2 and in ClockWork remove battery stats
3. Drain and Charge battery to 4.2
I get enterprise email and I get a lot of mail daily that I have to read and respond to (150 or more -- no I don't respond to all of them), plus the phone calls, RSS reading and some texting plus a pic here and there and maybe a couple of you tube videos. I get more than 24 hours until the 15 % comes up. 50 hours would be nice but that did not even happen in my black berry with Edge only.
Mine improve 3 fold from sub 7 hours to 24 plus (yes I sleep late so probably the phone gets a 6 hour rest but the enterprise email and text is pushed down even then as I work with folks from Asia and Europe as well.
logdrum1 said:
Since I have access to a a battery simulator and charger... the best way to recondition a battery is:
1. Create a low battery scenario by lowering the input voltage to just a hair above 2.7 volts (I had to create a shim to get to the battery receiver leads).
2. Boot with full 4.2 and in ClockWork remove battery stats
3. Drain and Charge battery to 4.2
I get enterprise email and I get a lot of mail daily that I have to read and respond to (150 or more -- no I don't respond to all of them), plus the phone calls, RSS reading and some texting plus a pic here and there and maybe a couple of you tube videos. I get more than 24 hours until the 15 % comes up. 50 hours would be nice but that did not even happen in my black berry with Edge only.
Mine improve 3 fold from sub 7 hours to 24 plus (yes I sleep late so probably the phone gets a 6 hour rest but the enterprise email and text is pushed down even then as I work with folks from Asia and Europe as well.
Click to expand...
Click to collapse
How do I create a low battery scenario by lowering the input voltage to just a hair above 2.7 volts?
hiltun said:
Is it bad to let my charge over night overnight? I thought it would stop charging when it got full to avoid overhanging.
Sent from my HTC Inspire 4G
Click to expand...
Click to collapse
Yes, the "charger" that you plug into the wall is just a power supply, the actual "charger" is in the phone, and when it detects the battery is full it stops charging.
Is this the definitive way to do it?
http://hemorrdroids.net/battery-calibration/
Those steps came from here, xda devs.
1. Run the device down until it turns itself off.
2. Turn it back on and wait for it to turn itself off again.
3. Remove the battery for 10 seconds.
4. Replace the battery, but leave the device off.
5. Charge the device until full and then for another hour.
6 **Root users only** Using a Terminal Emulator, type “su” enter, followed by “rm /data/system/batterystats.bin”
7. Run the device’s battery down until it turns itself off.
8 .Turn the device on and charge for at least 8 hours.
9. Unplug the device, turn off, then charge for another hour.
10. Unplug the device, turn on, wait 2 minutes.
11.Turn off again and charge for another hour.
12. Restart and use as normal.
Quite a performance! Does it preserve battery lifespan, or is it more to do with slowing down battery drain and does it really work?
He mentions 2 interesting things:
"Generally charge them before they get lower than 50%". I didn't know that, so it's actually better to charge more often and not let it drain down?
"USB charging is actually better for the battery and you may get up to 1 hours more standby time." So you gain an hour standby but it takes twice as long to charge the phone.
Nice manual
Will try it
Sent from my GT-I9100 using Tapatalk
Some will say that its complete nonsense .
Overcharge for 8 hours ??? how does the battery not turn charging off at 100%
Recharge 50% the accepted figure is not to go below 20% to often .
They may be right or wrong their are so many contrasting views on battery charging .
jje
Discharging battery and then reloading it fully, it's the normal procedure for battery calibration for almost all the devices in the world (including computers, etc.).
Step 8 to 11 seems quite a bit strange however.
hm, just seen a different way to calibrate the battery. basically, you drain the battery, take it out for a couple of minutes, put back in, then try to turn it on to make sure it's completely flat.
then you charge it fully, then boot to recovery and wipe battery stats then drain and fully charge. so... which one is more likely to be the better?
that guy also advises to repeat that 12 step, 1-2 day long tedious procedure "every month or so".
it is lunacy honestly speaking
does it work? did he died ?
LOL I dont understand .... I just read in another day that NEVER LET BATTERY GO LOWER THAN 15% and know I read "drain drain drain" Oh welll ...
I also thought that at 100% the charging process stops.
Although this thread is about battery calibration, these questions about battery charging always pop up.
Battery calibration is the process by which you set your device with your battery data.
Every single battery is slightly different. Although there are minimum stantards to every spec of the battery, each battery is different.
Calibrating your battery is nothing more than setting your phone to the real specs of your own battery (since the phone comes configured with the battery factory standards). For example, your phone may be set to use a battery which maximum charge is 1650 mAh, but your battery has a maximum charge of 1625 mAh. That may be within the acceptable factory standard, meaning you have a normal battery, but that also means that your phone will never indicate a 100% charge after you unplug the charger.
If you calibrate that hypothetical battery, you will "tell" your phone that its maximum charge capacity is actually 1625 mAh, meaning from that on your phone's battery indicator will be more accurate.
For that reason, it is necessary to fully discharge and fully recharge your battery for the calibration process, since your device must read the actual specs (minimum charge, maximum charge, charging current, etc) of the installed battery.
I don't know about how many times this full cicle (discharging and recharging) must be performed, but that is the reason why it must be performed for the calibration to succed.
A DIFFERENT THING is the normal discharging and charging process during normal use of the phone.
In this case, you should NEVER let your battery go under 20% and, what few people know, it also should never go over 95%. This stresses the battery and diminish its life time.
Also, and there's a lot of doubts about this, the lower the charging voltage, the slower the charging process, but the longer the battery life.
High charging voltages (like the one used by the charger sold with the phone, which is around 5V) stress the battery, diminishing considerably its life time.
That is true for all lithium-ion batteries!
Therefore it is better to charge your phone through USB (which uses around 4,3V) than to do it using the charger provided with the phone.
You may be asking "If the charging voltage of the charger provided by the manufacturer stresses the battery, why does the manufacturer provide such charger?"
For purely commercial reasons! Higher voltages mean shorter charging cycles, which please the consummer. Moreover, the battery capacity loss with the factory provided charger is around 15-20% a year (considering "normal" to "heavy" use). That is to say that after a year your battery will only reach 80-85% of the maximum charge it used to reach when it was new. And by that time your manufacturer expects you to consider buying a new phone, with more features.
Summing it up:
- calibration is just the process by which you "tell" your phone what the real specs of your battery;
- in normal use, charging your phone through USB is better than doing it with the manufacturer provided charger;
- try not to let your battery charge go under 20% nor above 95%;
- if you're interested, read more about it at batteryuniversity.com
Spin three times in clockwise direction with left middle finger on your nose while blinking your eyes with the phone plugged in.
Jump in the air 3 times.
Unplug phone.
Thats some messed up instructions.
Do you have any idea what kind of strain you're putting on the battery while doing all that?
All you're gonna get is some extra minutes, maybe an hour but is it really worth it because you're just reducing overall battery lifespan by doing that procedure over and over.
Specially when you constantly keep the battery at 4200mV (full charge) for a long time. You're practically killing it by overcharging.
Transmitted from a Galaxy far far away via XDA telepathy.
m2smoe said:
Spin three times in clockwise direction with left middle finger on your nose while blinking your eyes with the phone plugged in.
Jump in the air 3 times.
Unplug phone.
Click to expand...
Click to collapse
that made me chuckle
Never done a calibration on a battery and most of the time i even didn't let battery to discarge very much and then load it again. Never had a problem with battery life it last how long it should last every time and i've used that battery for years. So the battery "calibration" are kinda useless.
Matriak31 said:
that made me chuckle
Click to expand...
Click to collapse
Well then, my job here is done
m2smoe said:
Well then, my job here is done
Click to expand...
Click to collapse
it is indeed...i should follow you just to have more laughs like that cheers
RenatoN said:
Although this thread is about battery calibration, these questions about battery charging always pop up.
Battery calibration is the process by which you set your device with your battery data.
Every single battery is slightly different. Although there are minimum stantards to every spec of the battery, each battery is different.
Calibrating your battery is nothing more than setting your phone to the real specs of your own battery (since the phone comes configured with the battery factory standards). For example, your phone may be set to use a battery which maximum charge is 1650 mAh, but your battery has a maximum charge of 1625 mAh. That may be within the acceptable factory standard, meaning you have a normal battery, but that also means that your phone will never indicate a 100% charge after you unplug the charger.
If you calibrate that hypothetical battery, you will "tell" your phone that its maximum charge capacity is actually 1625 mAh, meaning from that on your phone's battery indicator will be more accurate.
For that reason, it is necessary to fully discharge and fully recharge your battery for the calibration process, since your device must read the actual specs (minimum charge, maximum charge, charging current, etc) of the installed battery.
I don't know about how many times this full cicle (discharging and recharging) must be performed, but that is the reason why it must be performed for the calibration to succed.
A DIFFERENT THING is the normal discharging and charging process during normal use of the phone.
In this case, you should NEVER let your battery go under 20% and, what few people know, it also should never go over 95%. This stresses the battery and diminish its life time.
Also, and there's a lot of doubts about this, the lower the charging voltage, the slower the charging process, but the longer the battery life.
High charging voltages (like the one used by the charger sold with the phone, which is around 5V) stress the battery, diminishing considerably its life time.
That is true for all lithium-ion batteries!
Therefore it is better to charge your phone through USB (which uses around 4,3V) than to do it using the charger provided with the phone.
You may be asking "If the charging voltage of the charger provided by the manufacturer stresses the battery, why does the manufacturer provide such charger?"
For purely commercial reasons! Higher voltages mean shorter charging cycles, which please the consummer. Moreover, the battery capacity loss with the factory provided charger is around 15-20% a year (considering "normal" to "heavy" use). That is to say that after a year your battery will only reach 80-85% of the maximum charge it used to reach when it was new. And by that time your manufacturer expects you to consider buying a new phone, with more features.
Summing it up:
- calibration is just the process by which you "tell" your phone what the real specs of your battery;
- in normal use, charging your phone through USB is better than doing it with the manufacturer provided charger;
- try not to let your battery charge go under 20% nor above 95%;
- if you're interested, read more about it at batteryuniversity.com
Click to expand...
Click to collapse
You should post the source for your info, cause I am seeing a lot of incorrect information in here.
If you guys want to learn about your battery, visit the site Battery University
The OEM replacement battery is worth about $10.
Save yourself the stress....use it...charge it when you need to...if the battery ever fails cough up $10.
Sent from my GT-I9100 using XDA App
The way I would calibrate my batteries is a bit different. Lithium ion batteries don't need to be drained then charged to full AFAIK, and I even remember reading somewhere that draining it is actually only for NiCad batteries. It used to be relevant when phones were using NiCad but not anymore.
Read: http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
As such I have read that the universal way to 'calibrate' batteries is by charging to full, using for a couple of mins and charging again.
What I have been doing is:
1. Charge to full when phone is switched off (doesn't matter if it's from 0% or 99%).
2. Switch on the phone, use for 5 mins.
3. Switch off then charge until full.
4. Repeat step 2 once more
That's it! It seems pretty simple but it seems to have worked for me.
The way i do it is different. Firstly i have the battery calibration app from the market by Nema..then i fully charge my phone and when it says its fully charge i go into the app. There it gives me the instructions on how to calibrate...First i wait till i charge the phone without any interruptions. then click on the app and wait til the battery goes to 4200MV and then i press the calibrate button and then the app does it for me. Then i drain the battery again without any interuptions or breaks during that time and then charge it again once battery dies down and thats it.
there are so many ways being touted on the forums you really dont know which one to go for...but whatever works for each person then who are we to tell someone different just thought i share that
If my battery dies, or gets significally lower capacity after 1 or 2 years of usage, I'll just buy a new one if I plan to keep the phone longer.. Going through these rituals and painstakenly monitor my battery % so that it never goes below 20 % or above 95 % is just not worth it.. Doesn't increase the life THAT much anyway.. I use the phone until I hear the beep for low batt, and from there until I have a charger available.. Most of the time it's before it reaches 10 %, thats good enough for me.. Once in a while it might even go so far that it dies.. Then I charge it till it says 100 %.. Most of the times I plug it when going to bed, and let it charge over night.. This is normal usage and what the battery should be designed to handle, and so far it does..
So I rooted and installed a custom rom for my dad on his evo and as a good habit I always calibrate the battery with "battery calibration" app from the market. The evo and the epic both have stock 1500mah batteries. I ran the app on the evo and once it got to 100% it read a solid 4200mv.. but whenever I flash a rom on my epic and calibrate it afterwards, fluctuates from 4188 mv to 4194. Its pretty annoying that the battery isn't fully charging. My stock battery is 7 months old.
Sent from my SPH-D700 using Tapatalk
just curious, why is that annoying? do you think 12mv is going to do anything for you? besides i seriously doubt whatever is reading the voltage off the battery is accurate to a mv. If it was you would be able to see it run down in 1mv increments.
also not charging your battery to 4.2v will make it last longer and perform better.
You should use an actual DMM to read the battery not an app....4.2 volts and 4.192 volts really isn't that big of a difference anyway..... I have an associates degree in electronic engineering tech and I can tell you its not enough to notice a difference in batt. life
Yeah I know it's not a huge difference at all but i just wanted to read an explanation of why the case is. I know nubecoder released a patch for a more complete charge.. the app was the control, the phones were the variable so i don't think the app is misreading. I remember reading somewhere that if u leave your phone on charge after 100%, it starts draining?
Sent from my SPH-D700 using Tapatalk
I don't think that I've ever seen above 4185 on my phone, but as others have said it's of no consequence, and may increase the useful life of the battery and prevent early damage and loss of capacity, since the most damage is done to LiIon batteries when they are almost fully charged and almost drained.
The stock Froyo charging routine seems to fast charge to about 97%, then the blue light comes on. It then slow charges to 100% and stops charging. When the battery drains to about 95% it slow charges back to 100%. Lather, rinse, repeat until you unplug the phone. This seemed to change a bit in Gingerbread, where it seems to display 100% over a wider range of voltages.
theres many reasons why: first your phone cuts off voltage when it reaches 4.2v. so even if everything else was perfect you'd only see 4.2v for a small window. after then there is re-engage limit where it will trickle charge.
other reasons..
software to measure voltage isnt accurate to .001mv, batteries get uncalibrated, internal resistance grows over time, charging circuit would be really expensive to make if it was accurate to .001mv...
I never seen any patch for a more complete charge (closer to 4.2v). Someone might have made a patch that starts the trickle charge at a higher limit, but like i said before keeping your battery at 4.2v isnt good for it.
excuse me, but how close to 2700mv should it be before it should say 0% ?
mine says 100% at 4192mV but 1% at 3634mV
The highest mine's ever gone is 4192mV.
Urban Vendetta is one of the few roms I have had a full charge. It is all different on each rom and phone
Hello,
I am doing an experiment since few days ago. I noticed that if you disable the Fast Charging, and (most importantly) use a proper, thick 2A USB cable (I use a Kindle Fire original cable) then the battery lasts around 15-20% longer.
How to recognize that you got a proper USB charging cable ? With fast charging disabled and the battery empty, the phone should tell you that there are around 2 hours until full (instead of the usual 7 hours or so with fast charging disabled). That's when you know that you are using the proper cable. I bought a original Kindle Fire cable from Amazon and that is very solid, much thicker than the standard cable. See attached screenshot. With the standard cable this seems to be a hit and miss, you sometimes get the 2 hours message and sometimes the 7 hours message.
I repeated the experiment 3 times and each time I got significantly better battery life than before.
You may want to try it to see if it works for you.
PS: Attached is my latest battery life screenshot (APC8 firmware), which is the third charge since the experiment. 2 days 6 hours of stand-by with 5h SOT on a mix of 80% Wi-Fi, 20% 4G with nothing disabled (even Bluetooth is permanently connected to the LG smartwatch). Almost no videos played, only web page browsing which is quite demanding on battery.
Look if new software update is possible.
Yeah, I noticed that my battery life was worse when I used a ****ty 1 Ah Sony charger when I displaced the original Samsung charger. It took about 3 hours to charge it up to 100%, but then I noticed that the battery life would be worse than before. I found the original charger again, and battery life is back to being good again. I never use fast charging, unless it's in the middle of the day and I'm heading out or something.
None of the things mentioned above should (technically) have any impact on battery life once unplugged? I mean, stored electricity is stored electricity, so if someone QUALIFIED could give an explanation here, it would be cool.
Nothing new, I've always noticed that if I charge the phone with the original charger and fast charging disabled it will last much longer.
https://www.amazon.com/Amazon-Kindle-Micro-USB-Cable-Tablets/dp/B006GWO5NE
This cable? Which AC adapter do you use?
None of this solutions should impact battery life Oo. Energy is energy, no matter where it comes from?!
Would be nice, if someone qualified could tell us more..
Do you have the newest android version installed?
By the way, I only charge with original charger and cable, fast charge disabled (battery life is longer?!)
Battery life depends on how well you follow charging & discharging cycle. I usually fully discharge my battery (so that phone will shut down by itself after dropping below 1% charging), then charge it fully keeping it switched off & then use it.
I always had far better battery life than most people complain about.
BTW, I also tried charging battery keeping phone switched on at 10-15% charge remaining, battery definitely performed weaker for my use.
So that confirmed my theory based on my usage over last 7 years..
thegame2388 said:
https://www.amazon.com/Amazon-Kindle-Micro-USB-Cable-Tablets/dp/B006GWO5NE
This cable? Which AC adapter do you use?
Click to expand...
Click to collapse
Yes, this is the exact cable I am using. A bit expensive, but for me it was the only cable that consistently worked at 2A over time.
J.Biden said:
I mean, stored electricity is stored electricity, so if someone QUALIFIED could give an explanation here, it would be cool.
Click to expand...
Click to collapse
BigDoun2011 said:
Would be nice, if someone qualified could tell us more..
Click to expand...
Click to collapse
I wonder if Qnovo is qualified enough ? Their technology is employed in many charging solutions. Here is what they say:
"Add fast charging - it gets noticeably worse. It turns out that the simple way batteries are charged today causes most of the damage that leads to shorter daily battery life and reduced lifespan."
Cst79 said:
Yes, this is the exact cable I am using. A bit expensive, but for me it was the only cable that consistently worked at 2A over time.
I wonder if Qnovo is qualified enough ? Their technology is employed in many charging solutions. Here is what they say:
"Add fast charging - it gets noticeably worse. It turns out that the simple way batteries are charged today causes most of the damage that leads to shorter daily battery life and reduced lifespan."
Click to expand...
Click to collapse
So you're saying that Kindle Fire cable extends battery life? Isn't 100% battery life from one cable the same as 100% battery life from another cable? Energy is energy.
thegame2388 said:
So you're saying that Kindle Fire cable extends battery life? Isn't 100% battery life from one cable the same as 100% battery life from another cable? Energy is energy.
Click to expand...
Click to collapse
In no way I am saying this. I am just saying that you need a cable that reliably supports 2A charging, so the charger shows 2 hours to full instead of 7 hours to full, even with fast charging off.
Cst79 said:
In no way I am saying this. I am just saying that you need a cable that reliably supports 2A charging, so the charger shows 2 hours to full instead of 7 hours to full, even with fast charging off.
Click to expand...
Click to collapse
Ah okay. I went ahead and bought one!
It ' also the logical thing. With fast charging , the battery holds less charge than the "normal . " He just spoke in various forums of this.
Anyway , great idea.
How to maintain max battery life span (reliable source):
Perform shallow discharges. Instead of discharging to 0% all the time, lithium-ion batteries do best when you discharge them for a little bit, then charge them for a little bit. The table below, from Battery University, shows that discharges to 50% are better for your battery's long-term life than, say, small discharges to 90% or large discharges to 0% (since the 50% discharges provide the best number of cycles-to-usage ratio).
·Don't leave it fully charged. Similarly, lithium-ion batteries don't need to be charged all the way to 100%. In fact, they'd prefer not to be—so the 40%-80% rule you heard is a good guideline. When possible, keep it in that range to prolong its life as long as you can. And, if you do charge it to 100%, don't leave it plugged in. This is something most of us do, but it's another thing that will degrade your battery's health. If you need to charge it overnight, use something like the Belkin Conserve Socket to stop it from charging after it's full.
·Fully discharge it once a month. This may seem contradictory, but hear us out. While lithium-ion batteries shouldn't be discharged regularly, most modern batteries are what's known as "smart batteries", which means that they can tell you how long you have until your battery dies (e.g. "2 hours, 15 minutes remaining"). This feature can get miscalibrated after a lot of shallow discharges. So, manufacturers recommend fully discharging your battery once a month to make sure this stays accurate.
Cst79 said:
In no way I am saying this. I am just saying that you need a cable that reliably supports 2A charging, so the charger shows 2 hours to full instead of 7 hours to full, even with fast charging off.
Click to expand...
Click to collapse
But you stated that it increases battery life.
thegame2388 said:
So you're saying that Kindle Fire cable extends battery life? Isn't 100% battery life from one cable the same as 100% battery life from another cable? Energy is energy.
Click to expand...
Click to collapse
What he's saying is that a slower charge equals a longer lasting battery between charges.
But maybe that doesn't apply to Li-ion batteries, according to this link here.
Outbreak444 said:
What he's saying is that a slower charge equals a longer lasting battery between charges.
But maybe that doesn't apply to Li-ion batteries, according to this link here.
Click to expand...
Click to collapse
You can try it for yourself (if you have an S7/Edge) and report the results here. I posted my results, I'm not an expert, I just tried this. I also tried the 7-hour slow charge (with a different charger) and it didn't work as well as the 2-hour charge. The 2 hour charge seems to work best.
Yeah, If you use fast charging the battery dies a little bit quicker. I recommend fast charging if you are in hurry.
I only use fast charge when I'm in hurry.. Nice feature! I try to charge my phone between 25-80%...
p2kin said:
Battery life depends on how well you follow charging & discharging cycle. I usually fully discharge my battery (so that phone will shut down by itself after dropping below 1% charging), then charge it fully keeping it switched off & then use it..
Click to expand...
Click to collapse
Worst thing you can do for the lifespan of an Li battery.
meyerweb said:
Worst thing you can do for the lifespan of an Li battery.
Click to expand...
Click to collapse
I disagree, even though it switches off itself, it still has charge, don't go by it says 1%.. so it's not fully discharged... besides my method served a good battery life to me over the years with earlier phone models