Database Users

Busy tone always through external speaker ?

I have got an O2 trion which has a rather strange feature. When I call a number which is busy at the moment the busy tone is always delivered through the external speaker even though the external speaker is not on. HTC support says they have never heard of this problem and I should send the device in. I hoped that the ROM update HERMIMG_O2_1.25.207.1_SHIP.nbh whould solve the problem but it does not.
Does anybody else have the same problem and is there a solution?
ThankX
Stefan

Yes, I have same problem.

Same here on my V1605. It seems that there is stiill no way of resolving this issue.
See thread: http://forum.xda-developers.com/viewtopic.php?t=61115

I've also discovered that when the engaged tone sounds through the speakerphone I'm no longer able to hear the phone ring - it goes straight to call divert. Will phone CS tomorrow to see if they have any answers.

Hi dIesigner_1,
thank you for the link to the existing topic for this problem. I could not find it before my post.
I also do have the screen alignment problem so I sent the device back to O2. I am looking forward what will happen and if both issues can be resolved. :?:

same issue
hi,
i have the strange busy tone on speaker effect too.
thou hapily it doesn't seem to affect my call routing.
would be interested in the solution, though!
cheers.

I have the same issue on my HTC TyTN, not always but it happens random from time to time. Very strange behavior...

*push*
any solutions yet?
that is anoying as hell!

Hi,
I got a new O2 trion as an exchange device due to screen alignment problems. I also claimed the external speaker bug. Guess what! The screen alignment is ok so far but the external speaker bug is still there. I called the company CS which is responsible for the exchange. They claim never to have heard about the bug and they offered another exchange...I do not belive this will help as long as nobody complains about the problem and HTC is forced to do something.

I get that sometimes too

Found a solution from another thread
workaround update: change "Script" value to "ap" for tone to play only once, and change "Sound" value to "busytone.wav" (comes in rom, at least for HTC TyTN) - it's not loud at all.
Click to expand...
Click to collapse
Thanks to shadowcaster for this tip.
Also if you want to disable the sound just remove the Script key.

elysion said:
Found a solution from another thread
Thanks to shadowcaster for this tip.
Also if you want to disable the sound just remove the Script key.
Click to expand...
Click to collapse
Can anyone explain the remedy for this problem in the most lamens of terms for someone still soaking wet behind the ears regarding my Tytn and WM6 and smartphones in general? Please?

problem whan carring on a belt !!!

Hello,
I use the device and Abaoseniyah subject Venratiq belt.
When I making or receive calls sometimes created a situation disconnects the call and / or passes Autmteat call waiting because the instrument hardware buttons.
my phone locked all the time I was turning off.
I tried the twikes and a few options but I can not find anything .... The idea only costs me at the top of the buttons is a pair of these to another program and the phone thing I did not want to do
Is anyone else experiencing this Evevayyah?
Does someone have an idea what a creative what to do to avoid this ?
Thanks in advance,
Daniel

sombudy.......???

daniel76 said:
Hello,
I use the device and Abaoseniyah subject Venratiq belt.
When I making or receive calls sometimes created a situation disconnects the call and / or passes Autmteat call waiting because the instrument hardware buttons.
my phone locked all the time I was turning off.
I tried the twikes and a few options but I can not find anything .... The idea only costs me at the top of the buttons is a pair of these to another program and the phone thing I did not want to do
Is anyone else experiencing this Evevayyah?
Does someone have an idea what a creative what to do to avoid this ?
Thanks in advance,
Daniel
Click to expand...
Click to collapse
My english is far to bad to understand this. sorry

I had a similiar problem... I installed A_C's S2U2 and seems to help... free program available here... feel free to donate to A_C though... he does GREAT work... http://s2u2.eqvipage.dk/wip.html

u mean slide to unlock ?

No sound when I call someone or someone call me please help !!!!

Hello everyone,
I have a HTC 3G JADE has a problem. I don 't hear anything when I phone someone or when someone phone me.
As against the speaker behind works well because I hear the bell and the player MP3. but impossible to hear anything during a conversation (unless I put in hands-free).
Please help me.
Thank you in advance

Plug in the handsfree again and that plug out.Test it.

svencho said:
Plug in the handsfree again and that plug out.Test it.
Click to expand...
Click to collapse
I do it but the same issue ... I apply to a hard reset and the same too.
Help please !!!

lem91 said:
Hello everyone,
I have a HTC 3G JADE has a problem. I don 't hear anything when I phone someone or when someone phone me.
As against the speaker behind works well because I hear the bell and the player MP3. but impossible to hear anything during a conversation (unless I put in hands-free). Please help me.
Thank you in advance
Click to expand...
Click to collapse
lem91 said:
I do it but the same issue ... I apply to a hard reset and the same too. Help please !!!
Click to expand...
Click to collapse
I think it's quite a serious problem and you may need to send the set to HTC for diagnosis (or replacement if it's still under warranty)

It's obvious that your speaker on the front is broken or has lost contact.
Another possibility is that the headphonesocket ont he bottom is broken.
The only solution after al you have tested is send it for repair.
Hope for you it's still under warranty.

[Q] Replace incoming call screen (andrd sense)

Hy guys, i'm really sick of the slide to answer sense screen that doesn't make any sense at all!
when the screen is off and a call comes in, it is a 99% chance that my pocket will answer or decline that call.
i did figure out a (sort of..) solution, by installing a little app that brings up a buttoned screen for answering\declining a call even when the phone is locked and a call comes in.
but since i installed it i started having issues with robot voice\flicking incall sounds, and other malfunctions SO i decided to reinstall android from fresh, and so this issue persists - i cannot answer a call normally when phone is in pocket.
i know this is NOT an issue only i'm experiencing, isn't there any way of replacing that stupid slider with another incoming answer\decline screen? maybe porting from another device? i'm certainly not a chef, and don't know my way around the android kitchen, but it just sounds really weird that there isn't a simple solution to this.. maybe replace the files associated with the slide answering screen.. i don't know..
I'm sorry if this came out feeling like someone is being accused, i'm just blowing off some steam here fellas..
if anything at all - i appreciate each and every one of you for an awesome job of cooking\testing\sharing\asking\answering\being simply the coolest developers gang on the net.

I am 100 % with you on this. The call answering thingie drives me crazy.. I mean, did htc even betatest this slider?! :/

Damn ppl, i like that slide to answer/reject call screen alot.. )

Laynee1 said:
Damn ppl, i like that slide to answer/reject call screen alot.. )
Click to expand...
Click to collapse
well, it looks good, but it simply doesnt work like it should....

[Q] Need urgent help !!! Mic not working...SW problm with MDJs_CyanogenMod7_v.2.6

I got a strange problem..
If someone calls me , we both can hear..(2 way communication )
But when I call someone they are not able to hear me..my mic is not working..I can hear them..(one way communication ) ..that is not mic problem..something with software..
I found a stupid solution to this.. If I press mute 2 times ,I can speak and and they can hear me,,
Anyone got the same problem with 2.5 or 2.6 version? any solutions?
I am fed up of pressing MUTE always

appoos said:
I got a strange problem..
If someone calls me , we both can hear..(2 way communication )
But when I call someone they are not able to hear me..my mic is not working..I can hear them..(one way communication ) ..that is not mic problem..something with software..
I found a stupid solution to this.. If I press mute 2 times ,I can speak and and they can hear me,,
Anyone got the same problem with 2.5 or 2.6 version? any solutions?
I am fed up of pressing MUTE always
Click to expand...
Click to collapse
Have you tried to disable "Audible touch tones"? Before making a call that is.

The_Tape said:
Have you tried to disable "Audible touch tones"? Before making a call that is.
Click to expand...
Click to collapse
yes i have disabled it..

Are you using clockwork recovery for installing? If so wipe everything and reinstall

rubixhacker said:
Are you using clockwork recovery for installing? If so wipe everything and reinstall
Click to expand...
Click to collapse
im not using clockrecovery...but i have re installed it many times..

I used MIUI ROM with clockworkmode...I am getting this mute issue after 4 days ..It was working fine inititally..