Related
Hey guys, i have a epic 4g, and i have it rooted with a custom recovery. I loaded the Epic Experience Rom on it with the Mixup Kernel and everytime it boots up it freezes. So i than i thought it was the ROM, so i installed the AM_TrulyEpic_DK28_v2.06.12.10. This ROM doe not freeze, but i do not pick up signal on it. so than i went back to the Epic Experience and now it freezes at the samsung screen. So i'm guessing something with the boot and the ROM isn't compatible? can somone please tell me what i'm doing wrong?
tanks
Your flashing a dk28 rom without the dk28. Why not try reading the op of roms for install requirements and instructions
Sent from my PC36100 using XDA App
well the thing is i dont really care about the dk28 rom, the reason i installed that one was just to test if my phone was bad thus freezing or if the rom was not compatible with the build. I ultimately want to use the Epic Experience ROM with the epic. Is that ROM not compatible with certain builds?
You can install the eclair version of epic experience on 2.1, and its an ok rom, but if youre on 2.1 the syndicate rom is the best. But if you want the epic experience on froyo (aka the one thats updated) you need to flash DK28 uusing odin
I did flash the Eclair one first, but i will definately try to do the dk28 and see what happens. but for future references, is there a way i can find out if a phone is dk28/dl18? so i dont mess it up?
thanks
eric303 said:
Hey guys, i have a epic 4g, and i have it rooted with a custom recovery. I loaded the Epic Experience Rom on it with the Mixup Kernel and everytime it boots up it freezes. So i than i thought it was the ROM, so i installed the AM_TrulyEpic_DK28_v2.06.12.10. This ROM doe not freeze, but i do not pick up signal on it. so than i went back to the Epic Experience and now it freezes at the samsung screen. So i'm guessing something with the boot and the ROM isn't compatible? can somone please tell me what i'm doing wrong?
tanks
Click to expand...
Click to collapse
What you did wrong the first time was try to run a 2.1 kernel on 2.2 and now that you flashed a new rom that had the right kernel, you need to flash three dk28 modem. This needs to be done with a program called Odin. Search for odin dk28 modem and you SHOULD be able to find it.
Sent from my SPH-D700 using XDA App
eric303 said:
I did flash the Eclair one first, but i will definately try to do the dk28 and see what happens. but for future references, is there a way i can find out if a phone is dk28/dl18? so i dont mess it up?
thanks
Click to expand...
Click to collapse
Go to setting about phone and look at the baseband if ur on froyo it will end in dk28 if ur on eclair it will end on di18
sent from my Epic S
Dear All
before i restore my last eclair stock rom by red cwm, what should i do??
right now i using 2.4 voodoo with enable lagfix.
Do i have to :
1. go to cwm, disable lagfix
2. wipe all
3. restore eclair backup
4. reboot, flash by odin di01modem.tar
5. that's it
is it work to get me back my eclair stock rom??
or i just follow this Link
Odin Restore files to get you to stock
or
[ODIN] Full DI01 ODIN Package
Thx
Odin for full di01 will do the trick, no need for anything else.
Sent from my SCH-I500 using XDA App
To add to this post, disable voodoo and restart phone to let it disable add
Gurm said:
Odin for full di01 will do the trick, no need for anything else.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Rocking dj05 and jt's voodoo 5
It is my understanding that if you run the complete odin package it will overwrite even voodoo.
Sent from my SCH-I500 using XDA App
i have killed my phone 3 times not disabling voodoo correctly when flashing roms. and each and every time adrynalyne's full di01 restore package has overwritten the whole thing for the win.
so if you are going back to bone stock, unrooted, full bloated eclair, (ie because you need to bring the phone back to verizon for warranty work) then that is your best bet. it will indeed wipe any and all voodoo whatnot from your phone.
Isn't it fine just to bring it back to stock DL09 Eclair, since that's the latest official OTA release? I don't see why you need to go back all the way to DI01 if you're planning on returning it. But I guess in the end of the day it won't really matter either way.
It doesn't really matter, all of the all in one vzw fascinate odins will work.
You technically don't _need_ to odin anything but the modem though.
For me, there was no lagfix and I had a working cwr/rom manager, so I did it in three quick steps.
1. Nandroid restore my DL09 setup.
2. Odin DL09 modem over EB01.
3. install a DL09 kernel from clockwork recovery and wipe the cache.
I was exactly where I was before with no headache.
Nandroid doesn't flash modem nor kernel.
However the all in ones may be faster if you are building from scratch (and absolutely the fastest route to stock). You should pick an all in one with the modem and kernel you want or you will have to do steps 2 & 3 either way.
Swyped w/ XDA App. A clean tie attracts the soup of the day.
trully guys, do you happy with leak froyo right now??
for me battery issue thats why I have to go back to eclair.
fascinate with eclair has the speed,powerfull n stable, its the same like I feel when use leak froyo.
there were no freeze or stuck either on both OS.
Sent from my SCH-I500 using XDA App
capunkjd said:
trully guys, do you happy with leak froyo right now??
Click to expand...
Click to collapse
I am happy, its Freakin' FROYO
for me battery issue thats why I have to go back to eclair.
Click to expand...
Click to collapse
For me, Froyo has been MUCH better with my battery. Have you wiped your Battery Stats?
fascinate with eclair has the speed,powerfull n stable, its the same like I feel when use leak froyo there were no freeze or stuck either on both OS.
Click to expand...
Click to collapse
I agree, but Froyo does make is a little more faster but with leaked ROMs they aren't fully tested, so that's why they are a little buggy, and thats why we have great devs here that fix em as soon as we find em
Sent from my SCH-I500 using XDA App[/QUOTE]
capunkjd said:
trully guys, do you happy with leak froyo right now??
Click to expand...
Click to collapse
I found that turning of gps when not in use(I never use it) stopped the battery drain.
I also want to go back to eclair and cant find it anywhere. I have my phone on metro and I cant get my web and mms to work, also my phone shows only 1.47 g internal memory. I bought this phone used so who knows what was dont to it. Anyone have an idea where to get eclair???
Edit- Installed this via odin as instructed. worked great took me back to 2.1 update 1 which is what i had when i got the phone. Will continue to work on the mms and web issue. Oh and still have the memory issue
pinkmini said:
I also want to go back to eclair and cant find it anywhere. I have my phone on metro and I cant get my web and mms to work, also my phone shows only 1.47 g internal memory. I bought this phone used so who knows what was dont to it. Anyone have an idea where to get eclair???
Click to expand...
Click to collapse
http://forum.androidcentral.com/verizon-fascinate-rooting-roms-hacks/53549-how-flash-full-package-dl09-stock-di01-via-odin.html
Cant restore eclair
Guys i have a bit strange problem. I'm trying to restore stock Eclair on my x8 but for some unknown reason i cant do it. Tried flashing it, tried with SEUS and no result plus it wont go into recovery wso i cant access root menu im running out of ideas help pls. Btw im running GingerDX v 0.26.
I got it to work. Sorry for disturbing guys. Thanks.
My evo gets stuck on ##3282# on stock 4.12 i cant get into edit mode or anything im a noob at this would anyone be able to help?
You need to be on a Sense ROM or nandroid back to Stock/Rooted
HipKat said:
You need to be on a Sense ROM or nandroid back to Stock/Rooted
Click to expand...
Click to collapse
its stock 4.22 i messed up on the 4.12 its should be 4.22
And if you're gonna do a ##data you need an msl. If its provisioning related, do a ##scrtn. That will knock the provisioning out completely and make the phone start up and hands free activate. Just make sure you're in good Sprint PCS coverage. Doesn't work if you're roaming.
Sent from my HTC Supersonic. Made by HTC tuned by cyanogen.
youtube.com/watch?v=3FoO3ms8fdE
Mine is doing the exact same thing and I am bone stock with the new OTA rooted.
Probably removed access
Sent from my PC36100 using XDA Premium App
So I'm now own a fascinate after owning a Droid 1, epic, ascend 2, Droid x, and now this... I was wondering if anyone could help me with finding cm7, which recovery, how to properly install it. I so far have the Samsung drivers and Odin 3 but my first attempt cm7 it worked fine minus no 3g and gapps wouldn't flash/install, so than I tried going back to stock and it bricked on me " thanks to mobilecomm man" I now have my phone back but I think I'm running 2.1 is their anything newer like 2.3 ? It would be great if someone could help me out
Sent from my galaxy s fascinate using xda premium
Get cm7 rom from here:
http://forum.xda-developers.com/showthread.php?t=1190668
use this guide to install it:
http://forum.xda-developers.com/showthread.php?t=1212239
So I did it fallowed what was posted and it worked but I had no 3g so when I tried to go back to stock I bricked my fascinate, I found a Odin3 back to stock I think its a DL09 2.1 something like that ant
Yhow it works fine but is their any stock or stock rooted 2.3 anything to fringe my device up to date
Sent from my SCH-I500 using xda premium
Did you repartition when you were installing cm7?
FDro said:
Did you repartition when you were installing cm7?
Click to expand...
Click to collapse
He should have... the guide I posted in the 2nd link clearly states to repartition. Usually if you add the pit file, repartition auto checks itself anyways.
---------- Post added at 10:41 AM ---------- Previous post was at 10:38 AM ----------
qblk said:
So I did it fallowed what was posted and it worked but I had no 3g so when I tried to go back to stock I bricked my fascinate, I found a Odin3 back to stock I think its a DL09 2.1 something like that ant
Yhow it works fine but is their any stock or stock rooted 2.3 anything to fringe my device up to date
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
There is no official 2.3 update yet... but there is a powerwashed gingerbread rom in dev section thats a official mezmerize build. Its basically a stock gb rom thats rooted/debloated/ bing free/ deodexed.
http://forum.xda-developers.com/showthread.php?t=1242747
you need to odin this just like a stock package. use the going back to stock section of this guide below. Just replace the file in step 1 with powerwashed gb.
http://forum.xda-developers.com/showthread.php?t=1238070
I agree PW GB is very good except when I try to play 3d games (Guerrilla Bob) the touch screen freezes and does not allow any movement.
I currently have a rooted vibrant my buddy has a fascinate it has been ota updated to 2.2.1 is there a root method or do I need to Odin his phone back to eclair? Thanks in advance hope I'm posting in the right area. I've got cm7 #85 and the new Neo 17 would like to find something similar for his fascinate.
Sent from my SGH-T959 using XDA Premium App
Rayn1328 said:
I currently have a rooted vibrant my buddy has a fascinate it has been ota updated to 2.2.1 is there a root method or do I need to Odin his phone back to eclair? Thanks in advance hope I'm posting in the right area. I've got cm7 #85 and the new Neo 17 would like to find something similar for his fascinate.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Just use the guide I posted in the 2nd link. It will put his phone on powerwashed ed05 2.2.2 froyo. It's basically a stock rom thats already rooted, debinged, debloated, otb fusion 1.6 voodoo kernal...etc. No point in just rooting anymore with these enhanced stock roms that ccompos put together for us.
Thanks will do
Sent from my SGH-T959 using XDA Premium App
[/COLOR]
There is no official 2.3 update yet... but there is a powerwashed gingerbread rom in dev section thats a official mezmerize build. Its basically a stock gb rom thats rooted/debloated/ bing free/ deodexed.
http://forum.xda-developers.com/showthread.php?t=1242747
you need to odin this just like a stock package. use the going back to stock section of this guide below. Just replace the file in step 1 with powerwashed gb.
http://forum.xda-developers.com/showthread.php?t=1238070[/QUOTE]
I did this on my Fascinate. I went from Super Clean 2.8 back to stock, OTA updated to Verizon 2.2 and then Odin'd Powerwash Gingerbread 2.0 beta 3. No complaints here, PWGB is great!
Ok well now my phone. Keeps saying E: cant mount/ cache/recovery/command
Logs
System
Data data
And so on......
This sucks i did the back to stock odin file dl09 file but its not working.... im just tryimg to get to an updated rom can someone point me in the right direction
Sent from my Wifes M865 using XDA Premium App
qblk said:
Ok well now my phone. Keeps saying E: cant mount/ cache/recovery/command
Logs
System
Data data
And so on......
This sucks i did the back to stock odin file dl09 file but its not working.... im just tryimg to get to an updated rom can someone point me in the right direction
Sent from my Wifes M865 using XDA Premium App
Click to expand...
Click to collapse
Odin eb01 with the atlas 2.2pit file and repartition checked then boot the phone fully...that will get you a working phone although eb01 is not an official release follow the directions in this link
http://forum.xda-developers.com/showthread.php?t=1124391
Sent from my SCH-I500 using XDA App
qblk said:
Ok well now my phone. Keeps saying E: cant mount/ cache/recovery/command
Logs
System
Data data
And so on......
This sucks i did the back to stock odin file dl09 file but its not working.... im just tryimg to get to an updated rom can someone point me in the right direction
Sent from my Wifes M865 using XDA Premium App
Click to expand...
Click to collapse
thats because the version of cwm you are running supports ext4 only, not rfs that powerwashed gingerbread is built on. Make sure you have cwm 2.5.1.x red recovery. There is no need to go all the way back to eb01. the stock ed05 package is fine.
I just had a shift 2.3.3 and spent a day or so bringing it back to 2.2 with root and the clockwork boot manager.
But how do i get a 2.3.3 or newer ota or as close to factory rom as possible to work with root?
I saw a rom called synergy which looks similar.
Sparksco has a rooted ota ROM in ROM manager 2.3.4
mik 2.1 executive edition
turkbot said:
Sparksco has a rooted ota ROM in ROM manager 2.3.4
mik 2.1 executive edition
Click to expand...
Click to collapse
newSENSE is based off the latest 2.3.4 ota... Synergy is old and dead...
Sent from my PG06100
drob311 said:
newSENSE is based off the latest 2.3.4 ota... Synergy is old and dead...
Sent from my PG06100
Click to expand...
Click to collapse
If your going for the stock look NewSENSE is where its at, and thats the actual rom im running on my speedy now
Sent from my myTouch_4G_Slide using Tapatalk 2
If you want the newest OTA 2.3.4 just rooted. Then Sparksco has the newest Rom in Rom Manager, as turkbot stated. Although if you go that route you will not have WiFi / USB Tether. You will just be on the Newest OTA 2.3.4 and Rooted. If you want a Rom that's based off the newest OTA but very close to Stock. Then newSense is what you want. Very close to Stock with extras, and very reliable. MikShifted G , not Stock. Many extras, and very reliable.
drob311 said:
newSENSE is based off the latest 2.3.4 ota... Synergy is old and dead...
Sent from my PG06100
Click to expand...
Click to collapse
Lmao yup and so is x99's 2.3.3 rom.
turkbot said:
Sparksco has a rooted ota ROM in ROM manager 2.3.4
mik 2.1 executive edition
Click to expand...
Click to collapse
It's the closest to stock sense you can get with root
Thank you guys.
What if you can't get the newest rooted OTA through Rom Manager...
Dogan
Honestly the only thing its done right for me is clockworkrecovery flash
The link is in my sig which you can view on pc.
https://docs.google.com/document/pub?id=1kWewyOf4WYpeFwaeXtUG8kn6Xk_w_eG9Yv4-dNoQOlk
Sent from my PG06100 using xda premium
There are instructions here too:
http://forum.xda-developers.com/showthread.php?t=1357157
Ignore this post Wrong thread.