can anyone explain the procedure?? I did a search and couldnt find the instructions
Just go here (or pick any Radio version you want), download, unpack, install.
ftp://ftp.xda-developers.com/Magician/Radio/MagicianRadio 1.12.10.rar
Once you unpack it, you can just run the install program and you should be all set.
If you have the entire ROM set (OS, Ext_ROM, radio), you'll have 3 .nbf files in the folder. The radio.nbf is obvious. The other two can be renamed and they won't install if you don't want them to.
Greeting from the boonies of Maine.
Phone: HTC Touch Vogue (US Cellular) w. coke 2.31 and a Rom I cooked in the PPCKitchen
The first one I created did weird things I did not like, so went back to Factory ROM from HTC website (I have a copy on my computers)
I then tried to pick and choose what I wanted in the PPCKitchen, but some thing happened there too. 1- no longer connects to the internet via #777
I wanted to go factory again so as to restart with using cabs instead so I can check 1 by one the items causing weird stuff to happen.
Connected to my desktop and got a can not communicate message -- it says Remote Network Error (Error 608) - anybody have a clue what I can do now - my laptop said the same thing.
If I can not connect through the desktop or laptop then I can not restore what needs to be restored.
Any assistance greatly appreciated.
Maine Notary Net
Firstly, have you tried to hard-reset the phone? (red+green+stylus in reset hole) Ive always noticed with flashing a ROM a hard reset immediately helps with weird issues that may occur
If that doesnt help, then you can always connect your (less than 2GB) SD card, the original works great for this into your PC and copy over the ROM you want to use onto it XXXfilenameXXX.nbh file, once there or before you copy it either way, rename it to VOGUIMG.nbh and then attempt to flash/reflash via bootloader mode (power+camera+stylus in hole)
Sometimes you can start bootloader then plug it in via USB, but its just easier to have the ROM on a SD card for future emergency flashes if needed
Hope that helps
Detroit Doug
Hard reset didn't work as it still uses the rom you just flashed.
I have the sd card to use but the file on the htc site for the shipped uscc rom is an exe file which includes the RUU so that I do not thing would auto run in the same way.
Any other ideas.
Download a custom ROM from around here for your carrier once you open the file (usually a .rar file) you will find the .nbh file there - rename that file to VOGUIMG.nbh and copy it to your SD card and use bootloader method to flash (BTW the ROM coming down from whatever site your original ROM is your getting is most likely just a compressed executable so you can probably use WinRAR or WinZip to extract to a folder and find the nbh file there)
Once it is up and running, connect via USB and attempt to synch and go from there
Detroit Doug
[Solved - sort of]
Thanks for the clues Detroit_Doug (referring to the first post).
I was able to place the phone in bootloader (bottom would read [serial]) then plugged in the phone (changed to [USB]) and ran the exe file. That worked. So now I am back to stock.
QPST does not recognize my phone so how can I get the rom backed up as just the vogueimg.nbh file.
I use Vista and it has its own extract the nbh file -- right click on an exe does not include extract. I really do not want to have to have another program to do what vista has built in as it takes over all kinds of compressed files when you install it.
But my original problem is solved. Going to try to find cabs for just the items I want so I can use remove programs when things go wonky again.
Thanks again
Kevin M Carman
Maine Notary Net
mainenotarynet said:
QPST does not recognize my phone so how can I get the rom backed up as just the vogueimg.nbh file.
Click to expand...
Click to collapse
Simple answer: you cant
that is if Im reading your request correctly, you want to back your phone up into a .nbh file? if that is correct see simple answer.
ROMs are created to flash to a device, not like Ghost or Ateris that makes an image of the phone you can just restore the image in its entirety.
Your closest you can hope for is to install PIM or SPB backup solutions that will allow you to backup contacts, mail, texts, etc but unfortunately not apps or the OS.
mainenotarynet said:
I use Vista and it has its own extract the nbh file -- right click on an exe does not include extract. I really do not want to have to have another program to do what vista has built in as it takes over all kinds of compressed files when you install it.
Thanks again
Kevin M Carman
Maine Notary Net
Click to expand...
Click to collapse
Vista (like XP and Windows 7) has its version of compression software and will allow the compression and extraction of SOME compressed files although Windows will see an .EXE as just that an .EXE and may or may not recognize it as a compressed executable and therefor wont open it.
Your best bet is to use a small app such as WinRAR or even 7-Zip, with those during the install you can select to allow Windows UI integration as well as what file extension you want it to be associated with and which ones you dont (zip, rar, iso, etc)
Hope that helps and glad your back up and running
Detroit Doug
I'm looking for the Radio that was shipped with the 1.5 cupcake for Eris..
Looked in "All Radios" didn't think I seen it in there..
download a 1.5 rom and take our the radio from there.
Sent from my Eris using XDA App
Last time I looked, the MR2 RUU was still up on PCD's site.
If you can not find a MR1 or MR2 PB00IMG.ZIP file someplace else, just download the RUU, and run it right up to the point where it is ready to do the install to the phone.
Then, search for "rom.zip" inside the temporary files unpacked under one of the Temp folders underneath
C:\Documents and Settings\<your user name here>\ (You may need to tweak your Windows Explorer to "show hidden files and folders" before you run the search.)
rom.zip is the the name of the PB00IMG.ZIP file that the RUU utility uses after it unpacks everything.
bftb0
This is a guide on how to downgrade the LG Vortex from 2.2.1 to 2.2 and get root back
How TO Downgrade To 2.2
This is a guide on how to downgrade your phone if you updated to 2.2.1 and lost root.
First you will have to get files from here
Extract it to your desktop
The file "LGNPST_General_v1.2_Lab_Version.msi" must be run first. this installs the program but it will be unusable. Take the file in the "LGNPST LAB 1.2" folder and copy and paste it into "C:/LG Electronics/LGNPST/".
Make a shortcut on your desktop for this file as it is the one needed to make the program work.
Than install the Companent and Generic files From here
This will install all versions of the .dll's from 1.0 to 5.0
Next create a folder named "Model" and "LGVS660" in "C:/LG Electronics/LGNPST/".
Now extract the KGVS660.rar and put the "tot', SCR and the dll file into the "LGVS660" Folder.
Now open up the run program and put this in there (regsvr32 "C:\LG Electronics\LGNPST\Model\LGVS660\VS660.dll") without the ()
From there open LGNPST from your shortcut. If your phone is plugged in it should recognize it immediately. If it doesn't click "File" then "Select DLL then choose MS690.dll from the list.
Make sure that where it says "Provision" it is set to "Upgrade". Do not ask about any of the other modes because I have no idea what they do or how they work.
Where it says "BIN file" click the folder icon and type in *.* where it says file name then click "Open" then choose the "MS690ZV3_36.S3_36.P3014.tot" file.
Put a check mark in "SCR file" and add the "Common_UserSCR_00.scr" file
Once that's done you're set for a complete restore and back on the path of 2.2 and get rooted again.
Download files and view pictures here
http://www.breakneckmod.co.cc/downgrade.html
I'm trying to follow the instructions to flash a LG 900k to remove the demo software (Its a work phone that we'd like to use as a loan device) from: http://forum.xda-developers.com/showthread.php?t=935605. But when I run LGDP2_V36_UMTS I get DLL cannot be found. I'm using Windows 7 Pro 64bit. What am I doing wrong?
DeanoMajik said:
I'm trying to follow the instructions to flash a LG 900k to remove the demo software (Its a work phone that we'd like to use as a loan device) from: http://forum.xda-developers.com/showthread.php?t=935605. But when I run LGDP2_V36_UMTS I get DLL cannot be found. I'm using Windows 7 Pro 64bit. What am I doing wrong?
Click to expand...
Click to collapse
There are two files required when you are flashing. One is a .dz the other is a .dll
Same thing happened to me when I first tried. I had forgotten to select the .dll file.
The C900K .dz I used was called LG-c900kAT-00-v10b-TEL-AU-SEP-29-2010+0_DZ.dz
There should also be a DLL file that is specific to allow flashing from a C900B to a C900K. Choosing the correct file is important, The one I used was called LGC900KB_100927_MP
This DLL file allowed me to change the firmware from C900B to C900K. Without the special modified file then you can't cross flash.
Here's the thread that you need for cross flashing:
http://forum.xda-developers.com/showthread.php?t=1508150