I'm looking for the Radio that was shipped with the 1.5 cupcake for Eris..
Looked in "All Radios" didn't think I seen it in there..
download a 1.5 rom and take our the radio from there.
Sent from my Eris using XDA App
Last time I looked, the MR2 RUU was still up on PCD's site.
If you can not find a MR1 or MR2 PB00IMG.ZIP file someplace else, just download the RUU, and run it right up to the point where it is ready to do the install to the phone.
Then, search for "rom.zip" inside the temporary files unpacked under one of the Temp folders underneath
C:\Documents and Settings\<your user name here>\ (You may need to tweak your Windows Explorer to "show hidden files and folders" before you run the search.)
rom.zip is the the name of the PB00IMG.ZIP file that the RUU utility uses after it unpacks everything.
bftb0
Related
can anyone explain the procedure?? I did a search and couldnt find the instructions
Just go here (or pick any Radio version you want), download, unpack, install.
ftp://ftp.xda-developers.com/Magician/Radio/MagicianRadio 1.12.10.rar
Once you unpack it, you can just run the install program and you should be all set.
If you have the entire ROM set (OS, Ext_ROM, radio), you'll have 3 .nbf files in the folder. The radio.nbf is obvious. The other two can be renamed and they won't install if you don't want them to.
I see people had good comments on the wm5 rom.
in WWW.PPCGEEKS.COM
Go To www.ppcgeeks.com open the ftp site go to my folder
From the homepage
PPCgeeks.com
Click QLINKS
From drop down menu select Open FTP site (need to register to see it)
Select TITAN folder
Then USERS folder
Then SAMPSON folder
Then REVISION 01 folder and download file... WM5_Clean_Rev_01.rar
Back out to ftp://up.ppcgeeks.com/Titan/RUU/ and download RUU_TITAN_SPRINT_WWE_2.09.651.3_1.32.00_SPCS_NV124_new_Ship folder contents into a folder of your choice on your computer i.e. RUU or otherwise. Delete the RUU_signed.nbh file from the folder and replace with the samsons nbh file. Then run ROMUpdateUtility.exe from the folder after first making sure your mogul is synced via activesync and has a fully charged battery. further details can be found in the Mogul Forum sticky for ROM updates at PPCGEEKS.
I'm so sorry about this. I really have spent over an hour searching and Googling and reading the Wiki but I just can't seem to find this simple thing.
My O2 XDA Orbit is dead so I thought I'd try one last attempt to rescue it by re-flashing the factory ROM (WM5). I found this thread via the wiki http://forum.xda-developers.com/showthread.php?t=306904 and am following the instructions for bricked devices. I downloaded the O2 Orbit WWE Wm5 factory rom from rapidshare, I have my device in the bootloader and it shows "USB" in the bottom left and the PC reacted and recognised the device when I plugged it in (but doesn't see it in Activesync).
The step I'm stuck on is that Meschle's instructions say "flash factory rom. (run rom executable or RUU updater from pc)". The rom is an nbh file so I suppose I need the RUU updater for PC. Where do I get this from? I just can't find it.
- Julian
dude if you downloaded the file the ROM you are talking about then you got ur self sorted - the package u have has the RUU or ROM Update Utility
when u go to bootloader, plug ur ppc to the pc and when u see the usb sign in the ppc screen just start the package u got from rapidshare it will do everything auto!!
let us know how you get on?
best luck with your 'surgery' it will be fine just dont worry
Maybe he downloaded simply a ROM file and not the complete package as usual. Download one of Meschle's or Tom's ROMs for example and delete the .nbh file inside the folder and replace it with yours.
Registerme said:
Maybe he downloaded simply a ROM file and not the complete package as usual. Download one of Meschle's or Tom's ROMs for example and delete the .nbh file inside the folder and replace it with yours.
Click to expand...
Click to collapse
true - Download any rom and delete the .nbh file inside the folder and replace it with yours. if u have ur rom on *.exe u can extract the ruu using winrar by right clicking and following the extraction!!
Direct download - a RUU
http://www.zshare.net/download/657626275df642/
this is a rom update utility - i got it from my files its only the ruu no rom is included so add ur *.nbh file to the extraction folder
BTW why dont u get artemis touch 3.01 rom its the best
http://forum.xda-developers.com/showthread.php?t=342298
So thus far I have had no luck extracting an NBH of the Sprint Hero RUU installer. I have tried 7zip and NBH_Extract, and I'm beginning to think that Android is a little bit different. I will go ahead and provide a link to the RUU and see if anyone can get rocover an NBH out of it. If it is not possible, would it be possible to somehow repackage all of the contents from a temp directory into a signed NBH form. But I would assume once it leaves the the installer it wont be signed anymore.
ftp://xda:[email protected]_2.73.405.5_WWE_release_signed_NoDriver.exe
Thanks for any help on this one.
This is a guide on how to downgrade the LG Vortex from 2.2.1 to 2.2 and get root back
How TO Downgrade To 2.2
This is a guide on how to downgrade your phone if you updated to 2.2.1 and lost root.
First you will have to get files from here
Extract it to your desktop
The file "LGNPST_General_v1.2_Lab_Version.msi" must be run first. this installs the program but it will be unusable. Take the file in the "LGNPST LAB 1.2" folder and copy and paste it into "C:/LG Electronics/LGNPST/".
Make a shortcut on your desktop for this file as it is the one needed to make the program work.
Than install the Companent and Generic files From here
This will install all versions of the .dll's from 1.0 to 5.0
Next create a folder named "Model" and "LGVS660" in "C:/LG Electronics/LGNPST/".
Now extract the KGVS660.rar and put the "tot', SCR and the dll file into the "LGVS660" Folder.
Now open up the run program and put this in there (regsvr32 "C:\LG Electronics\LGNPST\Model\LGVS660\VS660.dll") without the ()
From there open LGNPST from your shortcut. If your phone is plugged in it should recognize it immediately. If it doesn't click "File" then "Select DLL then choose MS690.dll from the list.
Make sure that where it says "Provision" it is set to "Upgrade". Do not ask about any of the other modes because I have no idea what they do or how they work.
Where it says "BIN file" click the folder icon and type in *.* where it says file name then click "Open" then choose the "MS690ZV3_36.S3_36.P3014.tot" file.
Put a check mark in "SCR file" and add the "Common_UserSCR_00.scr" file
Once that's done you're set for a complete restore and back on the path of 2.2 and get rooted again.
Download files and view pictures here
http://www.breakneckmod.co.cc/downgrade.html