I brick my wife phone I installed 2.2 that was fine then I add one of those 2.2 themes after it rebooted it is stuck right after the vibrant theme disappears, I tried every single way but still can't get into the download screen.
after I pull up the cmd screen what do I do next.
Reflash your rom from cwm it well start you all over again but you won't be bootlooping anymore
V5 custom vibrant
I'll love to but it freezes after the virbrant logo.
Turn off the phone then hold power and volume keys when the samsung screen comes up twice let go of the buttons this should take you to clowork recovery then go to reinstall packages if it goes back to the same screen select reinstall packages again then select choose zip from sd then navigate to where your rom is select that and you should be good to go
V5 custom vibrant
drew2jr said:
I brick my wife phone I installed 2.2 that was fine then I add one of those 2.2 themes after it rebooted it is stuck right after the vibrant theme disappears, I tried every single way but still can't get into the download screen.
after I pull up the cmd screen what do I do next.
Click to expand...
Click to collapse
to get it into the download screen, take out your battery, sim card, and microSD. plug your phone into your computer's usb. hold the volume up and volume down buttons while putting the battery back in, and you should see an android digging with "downloading..." underneath. after that, you can re-flash your phone. good luck!
Nothing is working I tried everything.
drew2jr said:
Nothing is working I tried everything.
Click to expand...
Click to collapse
Try going to http://forum.xda-developers.com/showthread.php?t=848737
i don't know much cause im new to android phones. that thread is dedicated to helping people fix their bricked vibrant. try asking him instead, he worked wonders with my phone =P
Thanks for all the help guys I got it fixed, I went to captivate site and someone there showed me how to get into the Adb and that's what work so again THANKS for all the help.
Related
I have a N1 and its worked fine for a while then i noticed when i turned it on it just stays at the "X" boot up screen.. I have already tried to reset the phone, clear storage, reboot,, and nothing fixes it. What can i do.. i know there has to be a way to load software back onto it or fix whatever is wrong with this thing. please help and thanks for our time.
can you get into the bootloader menu? by holding trackball and power button?
if yes then follow
http://forum.xda-developers.com/showthread.php?t=623496
wow,, ive done some programming and flashing to phones before but trying to follow those instructions and make sense of it all, isnt working with me. Thanks for the advice but that thread doesnt help me to much. i tried downloading everything it says i need and i cant figure it out.
rustynuttz said:
I have a N1 and its worked fine for a while then i noticed when i turned it on it just stays at the "X" boot up screen.. I have already tried to reset the phone, clear storage, reboot,, and nothing fixes it. What can i do.. i know there has to be a way to load software back onto it or fix whatever is wrong with this thing. please help and thanks for our time.
Click to expand...
Click to collapse
another app2SD thing after flashing a new rom?
well then you know more then me. If you can get into bootloader you should be able to get into recovery mode. You can also toggle USB mode, so you can be connected to your comp. In that case you can push a recovery image.
http://forum.xda-developers.com/showthread.php?t=611829
you can also wipe
etc
its all in that thread or somewhere else on this forum
rustynuttz said:
I have a N1 and its worked fine for a while then i noticed when i turned it on it just stays at the "X" boot up screen.. I have already tried to reset the phone, clear storage, reboot,, and nothing fixes it. What can i do.. i know there has to be a way to load software back onto it or fix whatever is wrong with this thing. please help and thanks for our time.
Click to expand...
Click to collapse
Any updates? same thing happened to me.
If in doubt then reflash everything again;
boot
system
and recovery
and start afresh.
see thats the thing,, i can click recovery from the bootloader screen and nothing happens. It will restart and just sit on the same "X" screen. Its very simple to put a phone into a DFU mode or recovery mode for Iphones,Motorolas,blackberry,nokia,samsung,Lg, and a few more i cant think of at the moment. When these phones become corrupt ive learned how to whatever firmware or software i want on dumb thing.. But this HTC is giving me a hard time and i know its something simple.. Most phones have a desktop software that will allow you to mess with phones programming, Itune-iphone/Blackberry-BB desktop Manager/motorola-RSD lite....ect. BUt i cannot find anything really for the HTC or just this N1. A lot of these programs for other brands, once you plug your phone in, will notice that the phone is in a recovery state and offer to do an update or a restore. Now why doesnt the N1 or do they, does google offer something like evryone else does?
rustynuttz said:
see thats the thing,, i can click recovery from the bootloader screen and nothing happens. It will restart and just sit on the same "X" screen. Its very simple to put a phone into a DFU mode or recovery mode for Iphones,Motorolas,blackberry,nokia,samsung,Lg, and a few more i cant think of at the moment. When these phones become corrupt ive learned how to whatever firmware or software i want on dumb thing.. But this HTC is giving me a hard time and i know its something simple.. Most phones have a desktop software that will allow you to mess with phones programming, Itune-iphone/Blackberry-BB desktop Manager/motorola-RSD lite....ect. BUt i cannot find anything really for the HTC or just this N1. A lot of these programs for other brands, once you plug your phone in, will notice that the phone is in a recovery state and offer to do an update or a restore. Now why doesnt the N1 or do they, does google offer something like evryone else does?
Click to expand...
Click to collapse
hmmm I understand your frustration. What did you do before it got to the 'X' splash screen?
I'm assumimg you've tried to reflash a different ROM in recovery mode?
rustynuttz said:
Most phones have a desktop software that will allow you to mess with phones programming, Itune-iphone/Blackberry-BB desktop Manager/motorola-RSD lite....ect. BUt i cannot find anything really for the HTC or just this N1. A lot of these programs for other brands, once you plug your phone in, will notice that the phone is in a recovery state and offer to do an update or a restore. Now why doesnt the N1 or do they, does google offer something like evryone else does?
Click to expand...
Click to collapse
The SDK can do that
like the others said, try get into recovery and reflash everything
SDK? i just turned the phone on and its stuck on the "Splash" screen just a big ol "X". I press volume down and power and pull up the bootloader menus.. i scroll down to recovery and press enter. and it reboots and stays at the damn "x" screen again. I've chosen everyone of the options it offers in that menu and nothing changes.. You know how when u first open that menu it will scan the SD card? Well it shows up for a second then goes away, and in the split second the green lettering is on the screen i swear it says "no splash image" or something like that. UHHHHhhhg!
Hmm I forgot how to get to get to recovery using physical buttons, sth like: power + trackball, or volume down + trackball i guess, so try that
So it looks like your phone is not rooted and you don't have Amon_Ra recovery maybe you have not even turned on USB debugger? tough luck friend
All is not lost if you can get into fastboot mode trackball and power together then using adb reflash boot,system and recovery images.
Or call Customer Service and trade in for a new Nexus One
if not you have to download the SDK http://developer.android.com/sdk/index.html
find stock images and reflash like the above post said
duylong186 said:
Or call Customer Service and trade in for a new Nexus One
if not you have to download the SDK http://developer.android.com/sdk/index.html
find stock images and reflash like the above post said
Click to expand...
Click to collapse
agreed....if you haven't "unlocked" the bootloader then i wouldn't bother with any of the suggestions....Call customer care and get a new one before you un-lock it and this mysteriously happens again...THEN, you'll be S-O-L!!
EDIT: Then with the new one, follow all the threads for un-locking, flashing recovery, nand,flash cyan, flash gapps LALALA
DOUBLE EDIT: Althought it sounds all you've done is messed up the recovery image, which you could re-flash. Then you could get into recovery and flash Cyan, having a functioning phone again
I am new to the android world, I have a vibrant that I rooted using the update.zip method. Then I went to apply the LAG FIX using the same method from the RyanZA thread. Now all I get is a boot sound and a black screen along with the buttons on the bottom glowing. I have no Idea where to even begin to recover this. I have a mac, any suggestions would be helpful. Thank you in advance!
Fathom0195 said:
I am new to the android world, I have a vibrant that I rooted using the update.zip method. Then I went to apply the LAG FIX using the same method from the RyanZA thread. Now all I get is a boot sound and a black screen along with the buttons on the bottom glowing. I have no Idea where to even begin to recover this. I have a mac, any suggestions would be helpful. Thank you in advance!
Click to expand...
Click to collapse
That's a boot loop. In your case, being new and all, it might be better to re-install the ROM and try again. You might need to give it a while as well, I don't know the details of the zip you used, but it might be copying large amounts of data, which will look like a stall in the boot process.
Get ADB and open a terminal window and do "adb logcat" it should let you know where you are stuck in the boot. Post the log and someone here should be able to help you.
Also, get boot camp and/or Virtualbox going so you can use Odin, which requires Windows. If you mess something up, you can use Odin to get back to a stock setup. Sucks that it requires Windows, but that's just how it is for now.
Oppps mis-read this phone is complete black no noise just heat
Moved your thread to general section.
Had the same problem when I tried to install that FixLag update.zip. Lucky for me, I did an Anroid Backup before I attempt it.
Hold down Vol+ & Vol- and power it up, do a Wipe.. when its done, restart your phone. When its booting up, its gonna act the same without the Tmobile Flash and still missing the Samsung Galaxy S logo. Just wait for your phone to VIBRATE. Then your phone should be working. I dont know what happen in that update.zip but it deleted the Graphic at the beginning when you first boot up your phone. After that I went back and did a Recovery and got everything back too normal.
kiddiosky said:
Had the same problem when I tried to install that FixLag update.zip. Lucky for me, I did an Anroid Backup before I attempt it.
Hold down Vol+ & Vol- and power it up, do a Wipe.. when its done, restart your phone. When its booting up, its gonna act the same without the Tmobile Flash and still missing the Samsung Galaxy S logo. Just wait for your phone to VIBRATE. Then your phone should be working. I dont know what happen in that update.zip but it deleted the Graphic at the beginning when you first boot up your phone. After that I went back and did a Recovery and got everything back too normal.
Click to expand...
Click to collapse
It worked!! Thank you so much! I am back up and running. No boot screens, however funtional and root maintained. Is there a way to recover the boot screens?
I was just searching through the forums for the answer to the last post in this thread - "is there a way to reinstall the boot animation? Well, is there? Mind, I DO NOT want the horrible tmo portion, just the S.
Thought?
Droidicus said:
I was just searching through the forums for the answer to the last post in this thread - "is there a way to reinstall the boot animation? Well, is there? Mind, I DO NOT want the horrible tmo portion, just the S.
Thought?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=7663822&postcount=38
I just did this to my phone like the ones stated above..... Blank screen then vibrate and im in the Android OS and it changed the Audio but still no graphics....... Kinda disapointing but until someone finds hwo to actually finx this I'm stuck.
So my Vibrant has been turning off randomly. I think its because of the loose battery or maybe it's just over-heating. But a few days ago, after turning it on there is only a black screen and lit capacitive buttons at the bottom.
It boots up normal, with the vibrant name, t-mobile animation, and the Galaxy S boot animation, then black screen! This started to happen after a few reboots, and now it won't rebbot properly, just black screen. It seems like I have to restore my phone, but the problem is I cannot get the phone into recovery or download mode! Please advise.
Samsung Vibrant, Eugene Eclair v6 custom rom with lag fix
First of all, there's no such thing as semi brick, there's brick or not. Try installing your Rom again..
Dan0zone don't be rude man,.backup your apps, enter recovery more delete all user data, if after that you have the same problem restore, or keep trying to enter download mode, try different methods
Sent from my SGH-T959 using XDA App
iwillkillyou said:
Dan0zone don't be rude man,.backup your apps, enter recovery more delete all user data, if after that you have the same problem restore, or keep trying to enter download mode, try different methods
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
dude, he cant back up if he cant access the homescreen. neither can he use rom manager..
cant use the hardware buttons to get into dl or recovery either... read op guys...
2010ngojo said:
[Q] Need help with semi/soft brick!
So my Vibrant has been turning off randomly. I think its because of the loose battery or maybe it's just over-heating. But a few days ago, after turning it on there is only a black screen and lit capacitive buttons at the bottom.
It boots up normal, with the vibrant name, t-mobile animation, and the Galaxy S boot animation, then black screen! This started to happen after a few reboots, and now it won't rebbot properly, just black screen. It seems like I have to restore my phone, but the problem is I cannot get the phone into recovery or download mode! Please advise.
Samsung Vibrant, Eugene Eclair v6 custom rom with lag fix
Click to expand...
Click to collapse
Do this bro... just tested it myself, works fine...
get adb installed on your computer, should already have it if your rooting but if not get it, youll find it in the stickied thread for informative links in the development section.
get a cmd prompt open on your computer and type in
>adb devices
let it start up deamon and it will tell you device not found, its ok.
now type and have ready...
>adb reboot recovery (do NOT press enter yet)
start your phone like normal. before its even finished with the boot up tmobile animation and the galaxy s (but after the plain vibrant text/picture) logo press enter. if it says error: device not found then wait all the way till galaxy s only you did it too early...
screen will go black and reboot into standard recovery... hope to goodness you had a working clockwork recovery installed and nandroid ready for this next part...
go down using your volume keys and select reinstall packages using the power key
now in clockwork recovery go down to nandroid
now go to restore
go to your earliest back up and restore it.
there you go.
I would start fresh get odin set up and reinstall the original rom at this point as something may still be corrupted, reroot, install latest clockworkmod, latest vibrant 9 rom (im using and see no bugs and runs better then the vibrant 6 rom i had) and DONT install the lag fix until the newest "TRUE" lag fix comes out with the new file system and kernel that JAC is working on and has almost ready.
good luck and pm me if any of these steps need further explanation.
Pypanys thanks for that post, I learn something new but he said its bootsup normally, but it goes to a black screen after the boot logo he can enter recovery mode, same thing happen to me. I was opening maps and it crashed, it frooze the phone, to I restarted the phone and enter recovery amd deleted user apps, and it did the fix,
Sent from my SGH-T959 using XDA App
iwillkillyou said:
Dan0zone don't be rude man,.backup your apps, enter recovery more delete all user data, if after that you have the same problem restore, or keep trying to enter download mode, try different methods
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
iwillkillyou said:
Pypanys thanks for that post, I learn something new but he said its bootsup normally, but it goes to a black screen after the boot logo he can enter recovery mode, same thing happen to me. I was opening maps and it crashed, it frooze the phone, to I restarted the phone and enter recovery amd deleted user apps, and it did the fix,
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
hes just stated man that he cant even get into recovery, my guess is hes locked out using the volume up/down keys like many new phones are (which btw is a known defect, spend 10min on the phone with tmobile doing thier trouble shooting to show them it doesnt work and they send you a replacement..) sooooo I gave him a way to get into recovery without the buttons and not having to wait till he gets to a black screen where possibly its frozen and he cant use adb commands.
I was just making mention to you also that he cant even back stuff up NOW (hopefully he already archived all his apps and data) and hes better off starting fresh since hes getting problems using his current rom/lagfix....
Thanks for the quick reply p()()pypants, but i will have to try your method later. It's late and I have class (college) tomorrow, but i will post my results soon. Thank you again.
Edit 1:
Btw, is there a way to back up my current rom? Like the way rom manager back up roms? I know my current rom works before so that's why I want to back it up.
Edit 2:
Actually i did not use adb to root my phone, just used the one click method. So can you please give me more detailed instructions on how to install/use adb?
Okay, I typed in "adb reboot recovery" and press enter as my phone booted up during the t-mobile animation and at the Galaxy S boot animation. Neither time work. Then I reentered it again after the black screen. That did not work either. CMD keeps on returning "error: device not found" and the phone stays on with the black screen.
2010ngojo said:
Okay, I typed in "adb reboot recovery" and press enter as my phone booted up during the t-mobile animation and at the Galaxy S boot animation. Neither time work. Then I reentered it again after the black screen. That did not work either. CMD keeps on returning "error: device not found" and the phone stays on with the black screen.
Click to expand...
Click to collapse
Do you have the right drivers installed? You can check here: http://forum.xda-developers.com/showthread.php?t=728929
Another very stupid question, just to cover all bases - your phone is plugged into the computer, correct? When you install the new drivers, try plugging the phone into a different USB port on the computer than you've been using, so it will hopefully pick up the new drivers without much extra effort.
If that doesn't help, just keep trying the command while the phone boots up. Maybe you'll get lucky and it will work. Sorry I don't have any real solution for you :\
I'm fairly sure I have the right drivers, otherwise I wouldn't be able to root in the first place. Yes, the phone is plugged in also. I'll try a different USB port and see what happens...
Update: Trying different USB ports does not help.
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
umm
Anyone??
Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.
hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.
nope
didn't work ;.(
Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}
Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)
Today I was finally able to get my phone rooted, install SafeStrap and get into TouchWiz. Thing is, I dislike TouchWiz so I downloaded CyanogenMod for note 3. I put the CyanogenMod zip in my downloads folder on my Note 3. I went into safestrap, clicked install, found the .zip and swiped to flash. After that finished I clicked reboot and I got black screened. I then took the battery out and then the **** hit the fan. I booted the device and the SafeStrap splash screen came up along with the stock bootloader android bot image and my screen was displaying all of these colors and tripping acid. I now have taken the battery out and am hoping I can save my device. For some information on the device, It's a Galaxy Note 3 on Verizon running 4.4.2 rooted. I cant even get into ODIN mode... I've been getting tons of views and no reply's so that's leading me to believe it's something major. If it is please don't be afraid to respond and if you need a clearer explanation please PM me so I can get this fixed. I need my phone for work and I picked a really bad time to start tinkering with my phone haha. Thank you so much for reading! :cyclops:
No sure but it sounds like you hard bricked your device ( no acces to download/odin mode or recovery).
"my screen was displaying all of these colors and tripping acid" sounds like a display error.
Put in the battery and keep trying to acces odin mode if the screen is working ( Hold power + home button + volume down) .
zat0x said:
No sure but it sounds like you hard bricked your device ( no acces to download/odin mode or recovery).
"my screen was displaying all of these colors and tripping acid" sounds like a display error.
Put in the battery and keep trying to acces odin mode if the screen is working ( Hold power + home button + volume down) .
Click to expand...
Click to collapse
What should I do if that doesn't work? I've tried a few times already but I'll keep going at it. The screen has now shifted from "Tripping acid" to a white fuzzyish screen that shows the SafeStrap splashscreen kind of outlined.
Have you tried to boot into recovery? That is assuming you have a backup saved.
Put battery in...hold down power, volume up and home key...when you see Samsung logo let go of the power key only...hopefully it might boot into recovery. Just one idea...
brojoe11 said:
Have you tried to boot into recovery? That is assuming you have a backup saved.
Put battery in...hold down power, volume up and home key...when you see Samsung logo let go of the power key only...hopefully it might boot into recovery. Just one idea...
Click to expand...
Click to collapse
OMG I GOT INTO RECOVERY!! I did make a back up but I did it in SafeStrap. It dropped me in the default BootLoader with a dead android with its chest opened up. Idk if this means something haha.
If it won't let you load the backup, you might could use kies software on a desktop or notebook to recover you device back to stock. Just another idea. Sometimes with enough persistence you can recover a semi bricked device. I sure hope you get it going. A messed up phone will make you pull your hair out....
brojoe11 said:
If it won't let you load the backup, you might could use kies software on a desktop or notebook to recover you device back to stock. Just another idea. Sometimes with enough persistence you can recover a semi bricked device. I sure hope you get it going. A messed up phone will make you pull your hair out....
Click to expand...
Click to collapse
Thank you so much! :fingers-crossed:
brojoe11 said:
If it won't let you load the backup, you might could use kies software on a desktop or notebook to recover you device back to stock. Just another idea. Sometimes with enough persistence you can recover a semi bricked device. I sure hope you get it going. A messed up phone will make you pull your hair out....
Click to expand...
Click to collapse
When I plug the phone in, Kies isn't recognizing it... Thoughts?
TheCottonKid said:
When I plug the phone in, Kies isn't recognizing it... Thoughts?
Click to expand...
Click to collapse
have you tried to boot in to bootloader? Take battery out and press Vol down + home button then power button. If you get in there you can use odin 99% to flash an other rom or stock firmware
TheCottonKid said:
Thank you so much! :fingers-crossed:
Click to expand...
Click to collapse
You are welcome. Hope you got it going. :highfive:
TheCottonKid said:
Today I was finally able to get my phone rooted, install SafeStrap and get into TouchWiz. Thing is, I dislike TouchWiz so I downloaded CyanogenMod for note 3. I put the CyanogenMod zip in my downloads folder on my Note 3. I went into safestrap, clicked install, found the .zip and swiped to flash. After that finished I clicked reboot and I got black screened. I then took the battery out and then the **** hit the fan. I booted the device and the SafeStrap splash screen came up along with the stock bootloader android bot image and my screen was displaying all of these colors and tripping acid. I now have taken the battery out and am hoping I can save my device. For some information on the device, It's a Galaxy Note 3 on Verizon running 4.4.2 rooted. I cant even get into ODIN mode... I've been getting tons of views and no reply's so that's leading me to believe it's something major. If it is please don't be afraid to respond and if you need a clearer explanation please PM me so I can get this fixed. I need my phone for work and I picked a really bad time to start tinkering with my phone haha. Thank you so much for reading! :cyclops:
Click to expand...
Click to collapse
You must clarify if you can get into download (Odin) mode:
- if you can not there is some major flash corruption going on, not much you can do
- if you can get into download mode you need to write your stock ROM.