Related
So, I'm pretty new w/ Android. Just flashed with voodoo lag fix D02-Kernel-LV-1250 using Dirrk's instructions. This means that I did the following:
- Rooted (was already done)
- Installed CWM (from instructions here)
- Downloaded D02-Kernel-LV-1250 and put on SD card
- Rebooted to CWM and did a backup
- Booted into recovery and flashed kernel
- Rebooted
Now, I see that DJ05 is released. (I even see stuff about voodoo lag fix for it...didn't know that was available.) So, now I wished I hadn't installed voodoo lag fix, because I hear it is difficult to uninstall.
I've tried to do my own research here, but I really don't want to change messing up my phone, so I'm asking for help here. Here are the threads I have sifted through:
- http://forum.xda-developers.com/showthread.php?t=805052
- http://forum.xda-developers.com/showthread.php?t=804784
- http://forum.androidcentral.com/fascinate-roms-hacks/34819-how-go-back-stock.html
- http://www.fascinateforums.com/foru...oms/685-instruction-remove-voodoo-kernel.html
- http://www.fascinateforums.com/foru...everything-you-wanted-know-about-kernels.html
Questions
What is the trade-off b/w D02 and DJ05?
If DJ05 really has the lag fix, is there any benefit of staying on D02?
For future reference, how do I know what kernel version I am using (Voodoo4 vs Voodoo5)?
Understanding what I've done above, what do I need to do to get to DJ05?
Do I really need to flash to stock and lose everything to get there?
And if so, can I use the backup I made in CWM?
If not, and I have Titanium Backup installed and all apps/data backed up, does it matter if I have to go back to stock?
Sorry for the newbie questions for help, but I really want to make sure I do it right. Any help is greatly appreciated.
FYI, this is what I've looked through for the new stuff available (should I go with the last link?):
- http://forum.xda-developers.com/showthread.php?t=869990
- http://forum.xda-developers.com/showthread.php?t=872378
- http://forum.xda-developers.com/showthread.php?t=874809&highlight=voodoo+lag+fix+vs+dj05
Thanks for any help you can give!
1. D02 is just the kernel version and DJ05 is a firmware update so there is really no comparison here.
2. updating to dj05 is worth it because it fixes several issues with the phone.
3. the only way to tell between voodoo 4 and 5 is to read which one you are downloading
4. it's a good idea to do a full wipe of the phone before updating to dj05 and your nand backup before the update will not work properly because the new kernel doesn't work with the old firmware.
5. if using ti-backup then yes wipe
to remove voodoo go to the voodoo folder on you sd and make a TEXT file called disable_lagfox.txt and reboot then LET IT FINISH COULD TAKE UP TO 20 MIN IN SOME CASES so wait it out don't pull battery no matter what.
when you update use the stupidfast kernels if your afraid of messing up your phone don't use voodoo it really is more of a power user option. didn't answer everything on order I know lol but think I coveted most of it
Sent from my SCH-I500 using XDA App
I'd like to add that in some cases the disable_lagfix method might not work. (It's supposed to be disable_lagfix, not .txt and not lagfox lol). In my case, it ran for nearly two hours without doing anything. Don't worry, if it takes that long just pull the battery and use ODIN to return to stock (from Adrynalyn's thread). But obviously make backups before you try to disable voodoo.
lol yea disable_lagfix sry swype error haha and the .txt will be added guess I just was thinking about doing it pc side I'm use to putting my own extension sometimes.
Sent from my SCH-I500 using XDA App
Thanks for the info! I've run out of time to do it before I leave for Christmas, but I'm going to do this first thing when I get back!
DJ05 fixed my GPS to the point of locking nearly instantly.
That's the kicker for me
everything else is gravy
I'm a relative newbie and not very tech-oriented, and I appear to have screwed up big time. I'd appreciate any help that can be offered. To cut to the chase, when I attempt to boot up my Fascinate, it gets stuck indefinitely on the Samsung logo.
Here's what I did to screw it up. I rooted my phone when I first got it last year and did a lagfix. It unrooted with the update to JD05. Yesterday I attempted to root it again using two different 1-click methods, neither of which worked. I then followed the instructions in the "Modified CWMrecovery for Odin" thread, not having it work until finally succeeding in getting root using CWM Red. The phone rebooted and was rooted, and everything seemed fine, so I used Rom Manager to Boot to Recovery. This did something strange--it took 15 minutes to get to the recovery screen, with a digital voice periodically telling me how much longer it would take. When I got to the recovery screen the first thing I did was to perform a backup. I think this effort to be safe did me in, because the phone must have already been screwed up then and I think I backed up the screw-up.
I then attempted to reboot and since then all efforts get me stuck on the Samsung logo. I've tried almost all options from the Recovery screen: reboot system now, apply sdcard update.zip, wipe date/factory reset, wipe cache partition, install zip from ascard, and restore. All bring the same locked up phone.
I'd appreciate any ideas to bring my Fascinate back to life!
First off the only way to get to red CWM is to install a voodoo 5 kernel. I'm thinking the voodoo kernel and the one click lag fix don't play well together. I'm sure someone else will step in with more info however I would start by looking for a thred called how to completely remove voodoo. Then try odin to restore. Good luck.
Edit. I read your post again and not sure if u did one click lag fix or just an older voodoo kernel. Either way same result u have to disable voodoo 4 and one click to install voodoo 5. Odin it. The voice u hear was the voodoo kernel converting your system to ext4 if this was the first time you've heard this I think your first lag fix may have been the one click.
Sent from my SCH-I500 using XDA App
Yes this happed to me too. If i take it to the Verizon store will they know my phone is rooted and moded? i need help ASAP
Search the forums on how to properly removed the voodoo lag fix. Then you need to reflash dj05. Voodoo doesn't really do much except for show you a higher quadrant score and limit to what roms/themes you can install. Same thing happened to me. Just do a quick search, I think its in the development section. The easiest way to remove it is with and. Hope this is somewhat helpful.
so fresh and so superclean.
Don't bring it to verizon because you would be defrauding them for your mistake. see if you can access your sd card through the computer and put either a file or folder in the voodoo folder called disable_lagfix and try booting again. If that doesn't help (it is probably too late for that) then you need to flash back to stock through odin. find the thread in development on how to do that. Good luck. Your phone is not broken. Breathe.
Sent from my sch-i500 using dl09 supah clean
Here is the ODIN back to stock if you don't want to bother with removing Voodoo. That should fix your phone with or without Voodoo. It's always worked for me.
THANKS SO MUCH its back to normal i cant thank you enough
Many thanks for all of the help.
Hello all,
Been rambling around the forums in ninja mode trying to gain enough knowledge to not mess up my phone before trying to mod it but alas best laid plans....
Anyhoo I was working to put the Froyo leak on my phone and everything was good till I did a cwm wipe of the phone and wammo it had problems. I managed to use Odin to get it back to barebones stock, lost my high score in Angry Birds too dang it.
Now that I am back to this point I tried to run the Verizin updates and it downloads and goes into install mode on reboot and it dies at Updating Modem section. At that point I saw I was rooted so I removed that and tried again, no dice amigo. Did a factory wipe, nothing. Cleared the cache, fail again.
If it helps its trying to do a dh12 to di01 update. Got any ideas?
When you went to stock did you flash the stock kernel and stock recovery as well? I had to do this when I updated to dl09
Good question and yes I believe I did, I followed this: http://forum.xda-developers.com/showthread.php?t=782204&highlight=return+stock thread to get the job done. Let me try it one more time.
Also I load the PIT file with each md5 correct?
Looks like I fixed it on the second time around. Not sure what I missed but the update went through. No worries. Might pay someone to hand hold my through getting DL30 on my phone cause even as an IT guy I'm missing something every time.
Strong thing is, once the DI01 update happens it actually doesn't find any other updates...wifi is off.
VZW pulled the DL09 update due to the e911 bug until it is fixed
Makes good sense. Sooo anyone wanna tutorialize me on how to de-crappify my phone? Its worth a donation from me.
You're on di01 right?
I would odin the dl09 package, then use cwm to flash super clean 2.2. Clean, debloated froyo goodness
Sent from my SCH-I500 using XDA App
Sounds good. The problem lies in me somehow fudging up the process at some point and having to set my phone back to stock again.
Where did you see this?
"VZW pulled the DL09 update due to the e911 bug until it is fixed"
Have any sources on this one? I really would like to see them.
Not doubting you, I have just been rebooting and *228 for 3 days trying to get this update only to see this quote...
VZW sent a message to all Fascinate owners the other night acknowledging the bug and a fix being in the works. Why would they continue to push it out after that?
Sent from my SCH-I500 using XDA App
Well...
0123456789
New EA update is being pushed out.
Verizon told me to go to a store as some phones will not accept OTA updates. Seems stupid and like a lie, but whatever...
Atst44 said:
"VZW pulled the DL09 update due to the e911 bug until it is fixed"
Have any sources on this one? I really would like to see them.
Not doubting you, I have just been rebooting and *228 for 3 days trying to get this update only to see this quote...
Click to expand...
Click to collapse
He's right. Google the source if you need it. Please don't take this response as me being snarky, I don't mean it that way.
I think the biggest issue people are having is not being careful and following the directions perfectly.
I was new two days ago and did this with only one hiccup.
1. I followed the Beginner's thread in this forum to get me rooted. First pass with Odin failed as the one click code didn't recognize the phone. 2nd pas worked. Trick was to just turn on USB debugging and plug in phone, do not then click the mount notification. Leave that off as USB debugging was all that was needed.
2. I installed Mod Manager and Titanium backup right after. This was part of the main directions and Titanium (though not mentioned) allowed me to save all my specific apps that had important data, like my 100% completed Angry Birds.
3. I then followed the directions in the developer forum for the How To.. install DL30 for Froyo. This scared me at first because the CW recovery stalled when wiping data. I waited over 30 minutes before getting the courage to pull the battery and start over. Figured its only deleting user data, should be ok. It was and then it worked the 2nd time without fail. I did reboot in normal recovery, but running the update.zip put it back into CW.
4. After that, I rebooted numerous times, checked all stock apps, upgraded firmware in camera, and used Titanium to add back my apps I bought or downloaded as well as restored my bookmarks and memo notes.
In the end I've had no bugs/issues as others have reported. Only functionality not tested is bluetooth as I don't use it for anything.
I hope this helps and if you are walking through it all again, I would be glad to help specific questions based on my experience.
I was DL09 stock OTA at first. I'd recommend getting rooted and using Odin to get the stock DL09 from these forums flashed before you try to put DL30 on. As a developer myself, it just makes sense to always put on builds that are in order of each other. So DI01, then DL09, then DL30.
0123456789
superchunkwii, thanks for the feedback. When I booted into cwm recovery mode it hung too. I think my fatal mistake was I booted in regular recovery mode and did my wipe....sad. I should have just rebooted and went back in cwm like you did.
As far as freezing apps I did not know freezing angry birds would save its data. Boy was my wife is mad (she plays it the most).
I did everything else on cue so I will try again and see how she goes. IT CAN BE TAUGHT! As the genie says.
On another note I did download the EA28 update today, can I install the DL30 Rom or do I need to "downgrade" to DL09 to get this done? Anyone try?
dlmcclou said:
superchunkwii, thanks for the feedback. When I booted into cwm recovery mode it hung too. I think my fatal mistake was I booted in regular recovery mode and did my wipe....sad. I should have just rebooted and went back in cwm like you did.
As far as freezing apps I did not know freezing angry birds would save its data. Boy was my wife is mad (she plays it the most).
I did everything else on cue so I will try again and see how she goes. IT CAN BE TAUGHT! As the genie says.
On another note I did download the EA28 update today, can I install the DL30 Rom or do I need to "downgrade" to DL09 to get this done? Anyone try?
Click to expand...
Click to collapse
1. Not freeze.. that makes it so app won't run. Backup with Titanium Backup is what you need I think.
2. What is EA28? I don't think the fascinate has had that build.
Just got an update EA28 any ideas what it does
Sent from my SCH-I500 using XDA App
EA28 build is the update to fix the emrgency dialing bug in DL09. As I understand, it is otherwise the same as DL09. I am by no means an expert though.
EA28 build is the update to fix the emrgency dialing bug in DL09. As I understand, it is otherwise the same as DL09. I am by no means an expert though.
Click to expand...
Click to collapse
Cool. Can anyone confirm this?
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
What are you running? It may be a permissions problem. Have you tried uninstalling it and reinstalling it?
I'm having a similar issue. Help!
jpolzner said:
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
Click to expand...
Click to collapse
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
I'm thinking it has something to do with flashing either the De-Binged browser or the new market update. Maybe something in the framework-res is getting hosed up?
I just did a wipe and reflashed plain old EB01 and I'm not going to flash any changes and see if the problem comes up again.
emortio said:
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
Click to expand...
Click to collapse
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
brettdacosta said:
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
Click to expand...
Click to collapse
I wonder if it has to do with the type of EB01 we're using or the CWM. I flashed CWM red via Odin, rather than updating via Rom Manager or update.zip. Also I used the EB01 Walkthrough in the fascinate developers section, the link is:
http://forum.xda-developers.com/showthread.php?t=948722
***UPDATE***
I resolved the problem... I think. I noticed there was a difference in the file names of the EB01 Modem in the walkthrough link I provided on the last line of the paragraph above and the EB01 Modem given in the original EB01 stock thread (http://forum.xda-developers.com/showthread.php?t=948679). I flashed with the eb01a_modem.tar given in the stock thread and then upgraded to Super Clean with Voodoo (v. 2.4 as of this writing). The market DID restore all the apps, before I was able to stop it, but after I restarted, there were no force closes nor were there any loss of preferences. I hope the modem issue was what was wrong...
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
I think it's a dbdata partition issue. I can't say how to fix because it's above my paygrade, but you may have to wait until it is officially released.
jpolzner said:
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
Click to expand...
Click to collapse
Try the Odin back to stock...DI01, wipe everything. Reroot and and get cwm. Then ODIN EB01 Modem Tar followed by super clean 2.4 install through cwm. Be sure to wipe data and cache before flashing super clean.
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
jpolzner said:
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
Click to expand...
Click to collapse
I suggest that typically before anything else b/c it seems to help most. I've never experienced these issues but many suggest this is a viable method to remedy certain problems. Don't see why you couldn't try the odin DL09 all-in-one and wipe the hell out of it and try again. Good Luck.
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
jpolzner said:
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
Click to expand...
Click to collapse
I believe it's currently inconclusive. There is speculation about exactly what causes it hence the reason I suggest wiping everything and then flashing the most recently provided stuff. That way it'll narrow things down. Someone can correct me, but if you odin back to stock, I'm 99% sure super cleans 2.4 voodoo kernel includes the new cmw. I was on green cmw unitl I flashed the seperate voodoo kernel posted by jt. I haven't had any issues.
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
I've never run Voodoo on my phone, but I did my initial install of EB01 with one of the older "Green" CWM versions.
adrynalyne said:
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
jpolzner said:
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
Click to expand...
Click to collapse
No...are you running voodoo? And what rom are you using?
EB01 Fully Bloated, Non-Voodoo Kernel
Baseband version: S:i500.04.V.EB01
Kernel version: 2.6.32.9
Build number: SCH-I500.EB01
http://forum.androidcentral.com/ver...roms-w-root-new-clockwork-updated-2-15-a.html
Try This...
This will hopefully repartition and clean dbdata corruption. BTW, I couldn't get 2.2 to run on my phone until I odin flashed a ROM which allowed me to then flash Adrynalyne's 2.4.
DI01, DJ05, DL09 did not work for the fix. Eclair worked fine, but Froyo would not work until I flashed a 2.2 odin.
Do I need to check the "Re-Partition" option in Odin when flashing or does it do it automatically?
I flashed from TW Bionix-v 1.21 to Trigger 2.1.1 and though the flash went great and the rom seemed to work perfect, my data is all messed up. It seems stuck on E now where before I was always on H. Speedtest has gone from 4000kbps down to 120kbps down. I flashed back to Bionix and even flashed in the KA6 modem that I had the best results with before and the problem still persists. In Boinix it will show the data speed as H, but as soon as I try to access the internet or use Speedtest, it drops to G, then to E. I'm lost as to where to go from here. Any help is greatly appreciated.
What about flashing back to stock using odin then reflashing the rom
Sent from my SGH-T959 using XDA App
Woah, wait up don't flash back to stock or anything. Follow this thread, it has all the modem software in it. I suggest using Odin...it's real simple, just dl the file extract it and load it into the phone section in odin and hit start....BAM you got a new modem. Do tests with JL5, it's a good modem.
I was thinking of flashing back to stock but I've never done it before. Is there anything I need to do differently because of Voodoo? I may just go the AIO Toolbox method if that's ok.
I won't be doing anything until later tonight. I've flashed a few modems in the modem thread, but none have fixed this problem. I may just flash back to stock (I really don't mind), but I'm just nervous about doing it because of having Voodoo on my phone right now. Can I just flash back to stock using the AIO Tools, or is this ill-advised?
Always best to disable lag fixes, I do it even if I don't have to. If the problem is persisting through different modems I dunno what's up....maybe hardware related? Maybe try one of those cell reception mods. That'd be the absolute last thing I'd do though, try every modem if you can.
I really don't know what happened. It may have even been a bad flash with Trigger, that's when things went bad. Honestly I wish I'd have just stayed put with Bionix. The phone was working perfectly with it. Oh well, I think I'll try flashing back to stock, then going back to Bionix.
Try this:
Settings-->Wireless and Network-->Mobile Networks-->Network Mode
I have mine set to WCDMA only. I only use Auto mode when I travel outside of town. Works great and keeps me out of the edge network.
kbohip said:
I was thinking of flashing back to stock but I've never done it before. Is there anything I need to do differently because of Voodoo? I may just go the AIO Toolbox method if that's ok.
Click to expand...
Click to collapse
DUDE, if you haven't ever flashed back to stock, I recommend it now then reflash the new rom. It will totally clean up in ghost data in the phone.
Remember the sequence is Backup everything 1st, then disable the lagfix, Then flash the froyo that does not brick (do not check the repartition box), then flash Stock JFD (this time check the repartition box) Then Root, then, the flash your new rom then Download Rom manager and titanium backup and you are good to go.
BTW, you most likely got a corrupted bit of software in the flash or already it was on the phone but there is no way of knowing, THAT is why you should do this.
kbohip said:
I won't be doing anything until later tonight. I've flashed a few modems in the modem thread, but none have fixed this problem. I may just flash back to stock (I really don't mind), but I'm just nervous about doing it because of having Voodoo on my phone right now. Can I just flash back to stock using the AIO Tools, or is this ill-advised?
Click to expand...
Click to collapse
Sorry to hear that man. I've had this problem before... looong ago. I had just flashed a new release of a TW ROM and all the sudden my data was stuck on E. I was freaking out just like you haha. I odined to stock and reflashed at least 3 times and the problem persisted.
I just left the phone on overnight and it seemed to work itself out by morning. Maybe it was T-Mobile doing maintenance or maybe the phone was just being retarded...
Either way, I'd suggest flashing back to stock at least once to clear things up. Check back in the AM and see if it's fixed or not
oka1 said:
DUDE, if you haven't ever flashed back to stock, I recommend it now then reflash the new rom. It will totally clean up in ghost data in the phone.
Remember the sequence is Backup everything 1st, then disable the lagfix, Then flash the froyo that does not brick (do not check the repartition box), then flash Stock JFD (this time check the repartition box) Then Root, then, the flash your new rom then Download Rom manager and titanium backup and you are good to go.
BTW, you most likely got a corrupted bit of software in the flash or already it was on the phone but there is no way of knowing, THAT is why you should do this.
Click to expand...
Click to collapse
I've never flashed back to stock, and of course all of these excellent custom roms have me flashing like a madman. I think I've flashed at least 5 different roms in the last month at least. I think I understand what you mean by "ghost" data. It's like the old days in Windows 98 where an upgrade install was never as good as a clean install. Flashing back to stock is sort of a clean install for Android I'm guessing?
birgertime said:
Sorry to hear that man. I've had this problem before... looong ago. I had just flashed a new release of a TW ROM and all the sudden my data was stuck on E. I was freaking out just like you haha. I odined to stock and reflashed at least 3 times and the problem persisted.
I just left the phone on overnight and it seemed to work itself out by morning. Maybe it was T-Mobile doing maintenance or maybe the phone was just being retarded...
Either way, I'd suggest flashing back to stock at least once to clear things up. Check back in the AM and see if it's fixed or not
Click to expand...
Click to collapse
Ok, this is strange. It looks like this is exactly what's happening. I'm now getting 4000+kbps down again on H. All day though the phone has been bouncing down to E every time I access the internet, go to market, etc. Upload is still quite a bit lower than it used to be though. Still, in the back of my mind though I feel like what oka said above is probably not a bad idea. For peace of mind I'm going to flash back to stock using AIO Vibrant Toolbox, then root, then flash either Bionix or Trigger back on.
Btw, for the short amount of time I had Trigger installed on my phone, I can tell you that it's a VERY nice rom. It looks great and is at least as fast, if not faster than Bionix. Great, great work.
I was having this problem earlier today too on Bionix. I was downloading Quadrant and I was stuck in E for a couple of hours. Must be something wrong with Bionix. Either way it's working now and I hope you solve your problem!
3g
Sent from my SGH-T959 using XDA App
kbohip said:
I flashed from TW Bionix-v 1.21 to Trigger 2.1.1 and though the flash went great and the rom seemed to work perfect, my data is all messed up. It seems stuck on E now where before I was always on H. Speedtest has gone from 4000kbps down to 120kbps down. I flashed back to Bionix and even flashed in the KA6 modem that I had the best results with before and the problem still persists. In Boinix it will show the data speed as H, but as soon as I try to access the internet or use Speedtest, it drops to G, then to E. I'm lost as to where to go from here. Any help is greatly appreciated.
Click to expand...
Click to collapse
Maybe you did something wrong,i also move from Bionix V to Trigger 2.1 and my data is working well,the only thing i notice is that 3g works like edge now,very slow and when on H it fly.