3 btns mode after froyo update - Galaxy S I9000 General

Hi guys
I have two Galaxys. After the Froyo update on one phone the 3 btns combination is not working, on the other phone when I try to use it, it displays a screen saying Downloading... and it gets stucked. It doesnt enter in recovery mode. It is the same screen as when you update the phone via Kies.
My questions are:
1. Do you guys have the 3 btn mode enabled after the update?
2. How to fix the problem on the second phone?
Sent from my GT-I9000 using XDA App

ludovicianul said:
My questions are:
1. Do you guys have the 3 btn mode enabled after the update?
2. How to fix the problem on the second phone?
Click to expand...
Click to collapse
1. All Froyo updates (so far) via FUS/Kies are High versions, they do not contain boot or sbl, so cannot touch 3BM.
2. Try Update it again, it sounds like the NANDINFO Block did not get updated and the phone is booting into DLM.

Related

finally from Samsung How to Solve the Black screen (death screen )

after mailing SAMSUNG by Mr.Alzubair
from ce4arab website
about the Death screen
this is the answer :
-----
Dear Alzubair ,
Thank you for contacting Samsung Electronics.
Reference number:2104286715
Regarding your case, kindly note that the image you have displayed on
the screen of your phone, indicates that the device has entered the
Recovery Mode. The reason this happened, is because you have tried to
update the device’s Firmware, which isn’t actually released yet, and
that’s the reason why the Software crashed as well.
In order to get out of the Recovery Mode, please follow the steps below:
Recovery Process
1.Remove the battery and reinstall it. Power On your Phone
- Phone display “Connection picture for Phone to PC”
2. Recovery Mode in Kies
If upgrade failed in upgrade step, you can see next Pop-Up
- Select "Yes”
Firmware Upgrade program progress to recovery mode.
3. Select "Recovery" button.
4. Read the caution and check “all information has been verified”
- After this, it’s same with Firmware update Process
5. Click “Next”
- Firmwareversion display
- Firmware file is downloaded to PC
6. Firmware update
- After Firmware downloaded, Click “Next”
- Firmware update start
Caution
- Never disconnect or turn off the
device in thisstep
- If so, recover the phone refer to
recovery section
7.Complete
- After Firmware update complete, the device reboot
automatically
- Click “Next” Button
To do this manually instead of using Kies, please click on the Power
button, the Volume down button and the middle button all together all at
the same time. The phone would flash for 2 times, and on the 3rd time,
please remove your hands fromthe phone, and it should boot up normally.​
I hope this has been of some assistance to you. If you do have any
further queries, please do not hesitate to contact us quoting your 210-4286715
reference number.
Kind Regards,
Aya Smith
Samsung Electronics UK
Customer Communication Centre
Tel.: 0845 726 7864 (All calls charged at Local Rate)
Homepage: samsung.com
[Product] GT-I9000
The reason this happened, is because you have tried to
update the device’s Firmware, which isn’t actually released yet, and
that’s the reason why the Software crashed as well.
Click to expand...
Click to collapse
Bwahahahhaahahahahh!!
cheetah2k said:
Bwahahahhaahahahahh!!
Click to expand...
Click to collapse
LOL XD
at least they help me
I just tried it ( by the Manual way ) and it Works
so this works on the semi-bricked, no 3-button combo enabled phones ??
.. let's say, after a bad/failed bootloader flash ?
someone please confirm ?
later edit:
from what I understand after reading this, Kies can force any (Phone--!--PC) SGS into recovery and/or download mode?
if so, can we "extract" this feature and make it into a stand alone solution for half-bricked phones?
That's not a real black screen, I got one and my phone got the BSOD: No possibility to power on, no charging, nothing.
The "phone ! computer" is just a semi brick, get back to download mode and reflash with odin...
But thanks for the info indeed.
franklin01 said:
The "phone ! computer" is just a semi brick, get back to download mode and reflash with odin...
Click to expand...
Click to collapse
Some SGSs can't access download mode from that screen because of the proper bootloader that's missing. (3 button combo fix needed, not so safe)
wish samsung also adds a feature to kies that fixes the IMEI =D
franklin01 said:
That's not a real black screen, I got one and my phone got the BSOD: No possibility to power on, no charging, nothing.
The "phone ! computer" is just a semi brick, get back to download mode and reflash with odin...
But thanks for the info indeed.
Click to expand...
Click to collapse
2day i triad it two times and it works
but from what i understand same thing happened to me today ..
i did the 3 times flashing way :
BE SURE THAT YOU disconnect THE CABLE!!
To do this manually instead of using Kies, please click on the Power
button, the Volume down button and the middle button all together all at
the same time. The phone would flash for 2 times, and on the 3rd time,
please remove your hands fromthe phone, and it should boot up normally.
Then its work and downloading mode appear i installed an official Ver. by odin ( check on Re-Partition ) then it will work (work for me after the same thing that happened : No possibility to power on, no charging, nothing. )
Does this means that the phone has a secondary bootloader or what I dont get it, I already sent my phone to samsung so I cant try, I had my phone bricked stuck at a black screen after the S logo.
hang on... so it sounds like samsung is saying that phones that dont go into download mode straight away from vol-down, home and power need to keep holding the power button until the power cycles 2 times, then let go on the third?
i cant test it now because after i bricked my phone (black screen no power on or charge) i sent it back and i got a new motherboard with 3-button enabled... but this does make sense because when i had a 3-button disabled phone previously i did manage to get it into download mode from the phone-!-computer screen by trying different timings. it took a long time but eventually worked.
so it would seem if this is the case, that it is just a different boot loader and a different key combination to access download mode, but working nevertheless?
can someone test this?
Cant believe it, if the phone does has a secondary bootloader then it cannot be bricked forever.
Sent from my GT-I9000 using XDA App
stephengoo said:
Cant believe it, if the phone does has a secondary bootloader then it cannot be bricked forever.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
We already knew it had a secondary boot-loader...
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Partitions
This is what is patched to hotfix the 3BR in disabled phones.
3 times flashing way wont work for me, and at Recovery in Kies i cant see my Device!
Absolutly no USB!!!!
Sorry Guys!
So this forced download mode can be possible...
This guy here tried hard to explain same thing:
http://forum.xda-developers.com/showthread.php?t=812933
do you think it will work with korean version galaxy s?
No-Exit said:
3. Select "Recovery" button.
4. Read the caution and check “all information has been verified”
- After this, it’s same with Firmware update Process
To do this manually instead of using Kies, please click on the Power
button, the Volume down button and the middle button all together all at
the same time. The phone would flash for 2 times, and on the 3rd time,
please remove your hands fromthe phone, and it should boot up normally.​
[Product] GT-I9000
Click to expand...
Click to collapse
"all information has bee verified" means put phone in download mode and connect it to PC (can't do it without working 3 buttons combo).
"manually instead of using Kies" = same thing, doesn't work without 3 buttons combo.
This doesn't works if you didn't have 3 buttons combo enabled. I used heat trick instead and then patch aires P-SBL.
I sent my phone back because of this black screen of death. I could get into Download mode, and the other (vol-up) mode too, but no upgrading or changing firmwares worked to fix it. And Kies didn't see it, though Odin eventually did.
Wondering now if the Black Screen of Death was fixable after all, but then would Kies have to recognize it first?
I have a phone ! pc bricked phone right in front of me, I've tried this and a million other combinations, nothing works. I'm not being super pessimistic or anything it really doesn't work. I've left it with a phone repair store overnight and they couldn't fix it either. Im going to visit samsung/optus tomorrow.
edit:
I also want to point out that that message contains some horrible english supposedly from samsung UK
d47:
I am exactly in your shoes. Even with the overnight leave at a GSM repair booth-thingy. Im also considering handing it back to the retailer, but havent tried the heating up trick yet... Maybe its worth a try ?

[Q] Galaxy Tab hangs on Galaxy Tab Logo after firmware upgrade

Hello, I have upgraded my galaxy tab (pda jj3-phone jid - csc jj2) to roto jmi firmware with odin 1.7. all the process seems to be ok, no error message.
After rebooting, the device hangs on galaxy tab samsung logo. factory reset is no longer possible. Does anybody have a idea?
Many thanks in advance.
ZK
Ever heard of "if it ain't broke dont fix it"? So, there you go
sure... sure but now it is
Try using volume UP rocker + power button.
This should put the phone into recovery.. Then you select reset to factory defaults. That should do the trick.
thx kragebein, unfortunately my device won't to go in recovery mode
Are you sure you are doing it right? Hold down the up volume rocker and the power button at the same time until you hit the recovery screen? Optionally you could try to see if you get it in download mode, and reflash your phone.. i had severe problems with mine, but got it fixed today by using roto-jma rom..
Sent from my GT-P1000 using XDA App
Yes, I think I dit it right. Download mode can be activated with volume down & power, but not recovery mode with volume up & power. I have tried to load the firmware again without any error message, but no way.
zolakero said:
Yes, I think I dit it right. Download mode can be activated with volume down & power, but not recovery mode with volume up & power. I have tried to load the firmware again without any error message, but no way.
Click to expand...
Click to collapse
Same here. Whatever I do (flash) I don't get past the Samsung Boot screen.
zolakero said:
Hello, I have upgraded my galaxy tab (pda jj3-phone jid - csc jj2) to roto jmi firmware with odin 1.7. all the process seems to be ok, no error message.
After rebooting, the device hangs on galaxy tab samsung logo. factory reset is no longer possible. Does anybody have a idea?
Many thanks in advance.
ZK
Click to expand...
Click to collapse
You need to flash a complete rom, like Roto JME FULL v.4 with the tab in download mode. He gives complete instructions.
Some releases are just upgrades, so start with a complete rom.
rangercaptain said:
You need to flash a complete rom, like Roto JME FULL v.4 with the tab in download mode. He gives complete instructions.
Some releases are just upgrades, so start with a complete rom.
Click to expand...
Click to collapse
I have tried that and either it fails to upload the primary bootloader (boot.bin) or it stays the same after flashing: it doesn't go beyond the first Samsung Screen. No adb connection possible.
How can I flash a primary bootloader without protection? With JTAG only?
A forum member, Rotohammer used a Jtag box to fix the bootloader issue. He doesn't recieve PM's, but someone he collaborated with to solve the bootloader issue is a fellow named Chainfire. Perhaps you can contact him for the procedure.
But when you flashed the JME did you use the hidden .pit file with repartition selected?
If I was in your spot I would
1. turn off the tab (push power button for 10 sec)
2. then push power and volume down to go to download (yellow digger screen or phone and pc screen)
3. Connect to pc with odin3 already opened, wait until the yellow box shows the connection
4. Load the p1_hidden.pit and check repartition
5. Flash that, then power off, go into DL again, load and flash JME v4 full rom
6. Now flash a modem
hi guys im thinking that u guys may have flash a lock bootloader rom
or u actually already have a lock bootloader rom
try load a roto jme v4 full version see if it works~
1. download odin 1.7
2. download Addon-JME-Modem.zip / P1_add_hidden.pit / Roto-JME-Full-v4.zip from http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
3. and follow the instruction here http://forum.xda-developers.com/showthread.php?t=895827
I wish i said that.
zolakero said:
Yes, I think I dit it right. Download mode can be activated with volume down & power, but not recovery mode with volume up & power. I have tried to load the firmware again without any error message, but no way.
Click to expand...
Click to collapse
It is there u just cant see it. Try to flash jj4 bootloader and see if u could go to recovery mode
Sent from my SGH-I987 using XDA App
The bootloader mentioned above is in a thread about the black screen and white line you are experiencing. It has the link to that jj4 file.
rangercaptain said:
But when you flashed the JME did you use the hidden .pit file with repartition selected?
Click to expand...
Click to collapse
Thanks, but this didn't help. I think it may be a hardware issue (e.g. the kernel can't be loaded, panic or something). I will return my tab tomorrow.

[ISSUE] Black screen after stop & start

Hello,
After many search on internet I guess I am faced to a strange issue.
I just stop/start my phone like normal and I got always a black screen although my phone seems to boot correctly and start until the main menu BUT:
No more Galaxy S screen logo and no way to get recover or download mode.
Any idea how to debug this ?
Not I had upgraded to Froyo 2.2.1 2 months ago and never have this problem.
BR
Have you tried factory reset after backing up data .
jje
I am open to any ideas.
How can I factory reset my SGS without display. I am blind, my mobile don't have any display, stay black screen, so I have to go until factory reset menu being blind.
Are you on stock rom and is it possible to startup the rom ? If this is possible then you can reinstall your rom and don't forget to flash the correct boatloader (with working 3 button combo) in it.
I think if you keep power button held down it factory resets .
Download mode = recovery jig from front page .
But i would be taking phone to service centre .
jje
Are you on stock rom and is it possible to startup the rom ? If this is possible then you can reinstall your rom and don't forget to flash the correct boatloader (with working 3 button combo) in it.
Thanks but I can not flash it, I dont succeed to get either recovery or download mode and Odin does not detect my phone either Kies.
I can not naviguate until USB debugging mode to enable ADB and work.
My mobile start but I am blind, I am looking for a solution that may enable adb or bring me download or recover mode ?
Yesterday the screen display during 1 2 second when I press I dont remember Vol Up + power... Never succeed to make it again.
Are you sure that the phone isn't actually in download mode and that u just couldn't see it? Try pulling out the battery and going.into download mode and see if Odin sees it. If ya running stock not rooted I would take the phone back.
Sent from my GT-I9000 using XDA App
Unfornately I am sure it is not in download mode because:
1) Start the phone
2) Vibrate 1 time then 2 times
3) A ring is played then showing the phone receive mail or SMS (GPRS is on)
When I touch the screen I can unlock it and click, sound is played so phone always start normally.
Problem:
- No SGS logo at boot, black screen always
- No way to boot in recovery or download mode
- No way to configure either Kies connection when USB is plugged (with Kies I thought I can upgrade the SGS to Gingerbread firmware) or enable USB debugging in order to connect using ADB.
I have ordered a JIG cable, maybe I will succeed to get the download mode ?
Thanks for your help.
I succeed to get the screen temporarly and flash using new firmware 2.2.1 but problem appeared, I flash with 2.3.3 and the same so I guess my phone is broken.

[Q] Galaxy S4 i9500 stuck on home screen for no reason

Hi guys,
I did a research regarding my problem, found a couple of threads but none of them helped and I noticed my situation is a bit different from most users having this problem.
I live in Brazil, went on a trip to USA for 15 days, kept my SIM card and SD into the phone, just used it to access WiFi, watch videos, make a couple of Viber calls, send messages via WhatsApp, etc. Everything was fine, no problem at all.
Today, when I landed in Brazil, I turned on the phone, entered my pattern and since then my phone just displays that initial screen "Samsung Galaxy S4" and keeps rebooting like crazy. In these last 15 days, I didn't make a single change on the phone. Absolutely nothing. It just decided not to work anymore
My phone is not rooted, runs the latest updates.
I tried initializing in safe mode (power+home+volume up), it shows the android green robot at a glance and then reboots again. I can't even read what is written on the screen, so fast the reboot takes place. I also tried pressing the menu button repeatedly, but no luck as well. Tried removing the battery, turning on without SIM & SD, nothing. When I connect it to a power source, the red led doesn't even light. My computer doesn't recognize it either.
Any suggestions on what to do? Returning it to the shop is not an option as well, cause I bought it out of Brazil...
Thanks a lot, colleagues!
VIDEO: http://www.youtube.com/watch?v=_0A_D5Od9LM
maykonsantini said:
Hi guys,
I did a research regarding my problem, found a couple of threads but none of them helped and I noticed my situation is a bit different from most users having this problem.
I live in Brazil, went on a trip to USA for 15 days, kept my SIM card and SD into the phone, just used it to access WiFi, watch videos, make a couple of Viber calls, send messages via WhatsApp, etc. Everything was fine, no problem at all.
Today, when I landed in Brazil, I turned on the phone, entered my pattern and since then my phone just displays that initial screen "Samsung Galaxy S4" and keeps rebooting like crazy. In these last 15 days, I didn't make a single change on the phone. Absolutely nothing. It just decided not to work anymore
My phone is not rooted, runs the latest updates.
I tried initializing in safe mode (power+home+volume up), it shows the android green robot at a glance and then reboots again. I can't even read what is written on the screen, so fast the reboot takes place. I also tried pressing the menu button repeatedly, but no luck as well. Tried removing the battery, turning on without SIM & SD, nothing. When I connect it to a power source, the red led doesn't even light. My computer doesn't recognize it either.
Any suggestions on what to do? Returning it to the shop is not an option as well, cause I bought it out of Brazil...
Thanks a lot, colleagues!
Click to expand...
Click to collapse
You could try this take the battery out for at least 12 hours , I read somewhere that can work for your kind of problem
I had this with Note 2.
No other option but to factory reset and flash official samsung firmware from sammobile.com
After that we were back to normal. Try that.
sounds not that bad..
try booting on download mode then flash some official firmware from sammobile.com
NOTE: don't flash XXUMH8 or any MH firmware for it contains new bootloaders with the samsung KNOX crap.
I really wish I could solve that without having to install everything again... but anyway
I'm sorry for this newbie question, but how can I flash a new firmware if my computer doesn't recognize my phone?
And what software do I need in order to do that?
Thanks a lot!
Just one more question...
if I really have to install a firmware, isn't it better to flash one from another country?
It seems like Brazil is always one of the latest to get the updates
Which country would you recommend?
Thanks a lot again, colleagues.
maykonsantini said:
I really wish I could solve that without having to install everything again... but anyway
I'm sorry for this newbie question, but how can I flash a new firmware if my computer doesn't recognize my phone?
And what software do I need in order to do that?
Thanks a lot!
Click to expand...
Click to collapse
This is how you flash official firmware on your phone.
http://forum.xda-developers.com/showthread.php?t=2265477
This topic also has some troubleshooting guide.
maykonsantini said:
Just one more question...
if I really have to install a firmware, isn't it better to flash one from another country?
It seems like Brazil is always one of the latest to get the updates
Which country would you recommend?
Thanks a lot again, colleagues.
Click to expand...
Click to collapse
Well... just tried to access download mode here, but no sucess.
Phone reboots after the warning. =( I can't get the message "Downloading… Do not turn off target" after I press volume up, it reboots.
Any suggestions?
maykonsantini said:
Well... just tried to access download mode here, but no sucess.
Phone reboots after the warning. =( I can't get the message "Downloading… Do not turn off target" after I press volume up, it reboots.
Any suggestions?
Click to expand...
Click to collapse
Well if u are able to boot the device u should surely be able to go to download mode
Can u try multiple times if possible
Power off device unplug it
Press -> volume down+Home+power button all together till it shoes option there volume up and u should be at download mode and then try flashing A firmware using Odin and once its done Reset the device from the phone back up and reset option all should be fine :fingers-crossed:
try avoiding any backup restore as there myte be some issue with some bad file also
123hiten said:
Well if u are able to boot the device u should surely be able to go to download mode
Can u try multiple times if possible
Power off device unplug it
Press -> volume down+Home+power button all together till it shoes option there volume up and u should be at download mode and then try flashing A firmware using Odin and once its done Reset the device from the phone back up and reset option all should be fine :fingers-crossed:
try avoiding any backup restore as there myte be some issue with some bad file also
Click to expand...
Click to collapse
Hi,
download mode doesn't work indeed. It reboots before I'm able to press volume up...
I have tried several times.
Any ideas?
maykonsantini said:
Hi,
download mode doesn't work indeed. It reboots before I'm able to press volume up...
I have tried several times.
Any ideas?
Click to expand...
Click to collapse
Sorry this is little weird but can u you try and see of you have original Samsung s4 as there are some clones available
Just search on this forum there are some example how to find out or Google it
Sent from my SM-N900 using XDA Premium 4 mobile app
123hiten said:
Sorry this is little weird but can u you try and see of you have original Samsung s4 as there are some clones available
Just search on this forum there are some example how to find out or Google it
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm totally sure it is genuine.
I mean, I can go to download mode.
When I press power+home+volume down, it works.
But when I click volume up in order to continue to download mode, the phone reboots.
It can't stay stable for more than 3 seconds, let's say.
maykonsantini said:
I'm totally sure it is genuine.
I mean, I can go to download mode.
When I press power+home+volume down, it works.
But when I click volume up in order to continue to download mode, the phone reboots.
It can't stay stable for more than 3 seconds, let's say.
Click to expand...
Click to collapse
I m too little confuse actually may be try doing reset hard reset and also factory reset going to stock recovery see what option can work else service centre myte be the option
Sent from my SM-N900 using XDA Premium 4 mobile app
123hiten said:
I m too little confuse actually may be try doing reset hard reset and also factory reset going to stock recovery see what option can work else service centre myte be the option
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, but in order to perform a hard reset, I need to press power+home+volume up at the same time, right?
That doesn't work either.
When the small green android robot is shown, the phone immediately reboots. I can't even read if there's something written, so fast it reboots.
Are there any options left or just sending to Samsung?
maykonsantini said:
Ok, but in order to perform a hard reset, I need to press power+home+volume up at the same time, right?
That doesn't work either.
When the small green android robot is shown, the phone immediately reboots. I can't even read if there's something written, so fast it reboots.
Are there any options left or just sending to Samsung?
Click to expand...
Click to collapse
B4 giving the phone to service just go to link stock firmware in my signature and ask there his user I'd is samersh72 he myte be able to help you
Sent from my SM-N900 using XDA Premium 4 mobile app
123hiten said:
B4 giving the phone to service just go to link stock firmware in my signature and ask there his user I'd is samersh72 he myte be able to help you
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok! Thanks a lot for your help
Try removing your sd card before going to download mode, maybe it's trying to finish a failed update. Try using someone else's empty sd card
Sent from my GT-N7100 using xda app-developers app
Rebooting issues are battery related sometimes. Try another S4 battery and see if it helps
Sent from my GT-I9505 using XDA Premium HD app
Thanks MaryAnna and Obagleyfreer. I've already tried what you just suggested.
No luck
I tried to give it to Samsung, and look what I've got:
They told me to look for support in the country I bought the phone.
This is ridiculous. It's a shame.
That's when I regret changing my iPhone for a Galaxy.

Samsung A20 semi-hard bricked

Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
sammiev said:
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
Click to expand...
Click to collapse
Thanks solved
sarthak.whenever said:
Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Click to expand...
Click to collapse
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
haiise said:
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
Click to expand...
Click to collapse
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
sarthak.whenever said:
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
Click to expand...
Click to collapse
Ohh glad to hear that you fixed your phone
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
sh_amuel said:
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
Click to expand...
Click to collapse
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
sarthak.whenever said:
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
Click to expand...
Click to collapse
I do know how to enter in download mode, but even when I upload the TWRP again and start over the process it get into the same black screen. I was wondering if Samsung Knox is blocking this action.
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
MrMusti53 said:
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
Click to expand...
Click to collapse
try to flash original software
haiise said:
try to flash original software
Click to expand...
Click to collapse
Any program can't see the device and the pc only saw it for a second
MrMusti53 said:
Any program can't see the device and the pc only saw it for a second
Click to expand...
Click to collapse
can you go to download mode ?
haiise said:
can you go to download mode ?
Click to expand...
Click to collapse
No, phone's no reaction
MrMusti53 said:
No, phone's no reaction
Click to expand...
Click to collapse
konudan bağımsız türk müsün la
Translated by GT: independent of the subject are you turkish
sarthak.whenever said:
Thanks solved
Click to expand...
Click to collapse
it didnt work for me , is there any other combo

Categories

Resources