Database Users

[q] help! Bricked samsung intercept!

Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.

I have the same problem! Please help!

When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.

The phone doesnt come on at all

see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.

Nope, it doesnt work, thx though

Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.

I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?

noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...

well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.

Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!

Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app

Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards

it just froze up, I reset a couple times, then tried power+vol up then..

Not sure what the heck happened to my device. I was using it when it just froze up outta nowhere. I tried resetting it a couple times but it wouldnt get past the android screen. Hard Reset, nothing. So I tried going into APX mode, power+vol up(idk why) then, it wouldnt get past the 'Acer' screen after that. So I let it charge overnight now it doesn't show anything at all. The power button does light up, but thats it. what the heck just happened?
NOTE: I lent out my sdcard with the update.zip in it. would putting my sdcard back in fix the problem or is it bigger than that?
is this thread a possible solution to my problem? problems seem similiar
http://forum.xda-developers.com/showthread.php?t=1874345
can someone please help me find out what happened with this, I really dont wanna call Acer n send it in if I can fix the problem myself

500tab said:
Not sure what the heck happened to my device. I was using it when it just froze up outta nowhere. I tried resetting it a couple times but it wouldnt get past the android screen. Hard Reset, nothing. So I tried going into APX mode, power+vol up(idk why) then, it wouldnt get past the 'Acer' screen after that. So I let it charge overnight now it doesn't show anything at all. The power button does light up, but thats it. what the heck just happened?
NOTE: I lent out my sdcard with the update.zip in it. would putting my sdcard back in fix the problem or is it bigger than that?
is this thread a possible solution to my problem? problems seem similiar
http://forum.xda-developers.com/showthread.php?t=1874345
can someone please help me find out what happened with this, I really dont wanna call Acer n send it in if I can fix the problem myself
Click to expand...
Click to collapse
Eh, well, need to know the condition of the tab. Sounds like it is stuck in APX mode. (Black display, white PWR light). Is this the case?
Generally, you might be able to PWR down, by press and hold the pwr button for several seconds. Then try to boot it normally.
Oh, BTW, Pwr and Vol+ is not how to get it to APX. That usually gets the stock bootloader which really isn't much of anything unless you have an update.zip on your ext sd card.
Were you completely stock? (not rooted or custom rom)
MD

Yes that's the condition, black screen white pwr light. It is rooted, thats it. Running ICS 4.0. I wont be able to get my sd card until wednesday so if I need that update.zip file I'll have to wait a few more days. Its completely off right now, I tried powering on and off a few times and I got nothing just a blank screen. Im unsure, what to try next??

500tab said:
Yes that's the condition, black screen white pwr light. It is rooted, thats it. Running ICS 4.0. I wont be able to get my sd card until wednesday so if I need that update.zip file I'll have to wait a few more days. Its completely off right now, I tried powering on and off a few times and I got nothing just a blank screen. Im unsure, what to try next??
Click to expand...
Click to collapse
Yeah, you're going to need an SD card. And make sure the tab is charged.
In the meantime, you can try a couple things just to see it you can get a different response. However, understand this.
1. You can probably forget any personal data that's stored on it. Photos, downloads, music, etc. Just to prepare you.
2. You probably have a corrupted bootloader partition. How it happens, with a normally functioning tab, nobody really knows.
You can try doing a data wipe. Usually we would wait till you get an SD card, but I'm curious if you can get anything on the display. To do this, with the tablet off, Press and hold PWR, while at the same time, continiously cycle your rotation lock left and right, quickly until you see "erasing user data" or something similar on the display.
Another thing, manually put it into APX mode. This involves using a paper clip, and press and hold the "reset" button near the USB port, then press and hold PWR. Count to 4 and release PWR, and 1 second later release the paperclip. Then plug your tablet into the PC, and see if the PC loads the drivers for it. You should already have installed the Acer USB drivers. If not, get them from the Acer site.
Understand, your chances of getting it going again, are less than 50/50. But, we all will give it a shot.
MD

This is exactly the situation I'm in... Black screen, White power light...
I was in the middle of an app, when tablet rebooted, wouldn't boot back up..
I was able to get into CWM recovery... investigated, and found that /system wouldn't mount... So, I was prepared to re-flash, so I first went to do a nandroid backup of my data folder... I also had an old nandroid backup, so I decided to restore that... After I did that, I couldn't even get into recovery anymore...
I've tried setting my tablet into apx mode, and trying to flash, but they always seem to freeze at "uploading image" (both with afterota unbrick and blackthund3r's tool)
Now, blackthund3r's tool will actually get the acer logo to show up, with "Entering download mode...", so that leads me to think the tablet isn't completely shot? It just gets stuck during the upload image...
Tried the erasing data as suggested by MD, but no luck, just black screen...
What is the sdcard method that you are speaking of? Is there anything else I can try?
Thanks in advance
---------
Edit:
Tried placing update.zip on sdcard for flashing, tried turning on the tablet with volume down...No joy
Hopefully someone has some other ideas for me? Thanks again in advance.
---------
Edit 2:
After a day of searching, finally came across this post.
Fixed and saved my tablet... Whew!

[Q] First boot loop, now wont turn on, 7 vibrations?? HELP!!

Hello, I have the HTC tmobile mytouch 4g and it is acting up. Stock phone, no roms or rooted.
Three days ago, at night, doing some browsing and then everything froze, would not respond. I removed battery, and then it did a boot loop so i kept trying for a while, taking out battery, and turning on but still boot loop, so then left it alone.
The next morning i held the power and home button and it turned on and it worked normally for the whole day! until about the same time two days ago. Doing a little reading and browsing before bed (same website too, but i didn't download anything and the site works fine on a computer) and it froze. Did the same routine except it didnt work in the morning again. I removed sd and sim card too, left everything out for a long time, but whatever i tried it wouldn't work.
Yesterday i tried all day and then I read online I should do a wipe cache partition from the recovery menu. So i did that, but it was still a boot loop. After a few tries, it stopped turning on. Now the screen doesn't even turn on, but the phone vibrates 7 times when power is pressed, then will not respond at all unless i take battery out, then it will do the 7 vibrations and etc.
All htc said is to try a factory reset, but it wont even go to that menu. I can send it to them, but will probably lose everything on my phone ( like messages, contacts, and app data?) BUT I'm convinced there is another way, since it fixed itself the first time.
Just recently, now it has started blinking the charging light when charging (i charged it about 10 hours ago and it didn't blink)
I don't really know much about how these things work, but I have been reading some stuff about pd15??.jzip and putting it on the sd card (i have access to a micro sdcard reader) Also about a stock image or something. I don't know much so please give a simple-ish answer.
IF THE SOLUTION YOU WILL PROPOSE HAS A LOW SUCCESS RATE OR HAS A POSSIBILITY OF FURTHER DAMAGING THE PHONE, PLEASE LET ME KNOW... If it is too difficult/ too much work/ or dangerous, then I don't mind losing whatever i have on the phone

The PD15IMG.zip is the "stock image." It has to be installed in the bootloader, and you WILL lose all of your data. Usually you can get to the bootloader by holding volume down while booting. It will scan for the file there. Can you get into your bootloader?

sigh
cannot turn on no matter what i hold.
I think the blinking last night meant that it isn't charging the battery anymore. wont even vibrate now unless it is plugged in. its not an issue with the battery is it??
if this stock image is going to delete everything anyway, i might as well send it to htc. i just hoped i might be able to save my messages because i have some really hilarious ones, but oh well.
Can you please tell me exactly what ill lose? so,
bookmarks on the browsers
contacts and messages
all apps (they're on my phone) and app data? (like will i lose my progress in temple run 2, lol)

myTouch 4g HELP said:
cannot turn on no matter what i hold.
I think the blinking last night meant that it isn't charging the battery anymore. wont even vibrate now unless it is plugged in. its not an issue with the battery is it??
if this stock image is going to delete everything anyway, i might as well send it to htc. i just hoped i might be able to save my messages because i have some really hilarious ones, but oh well.
Can you please tell me exactly what ill lose? so,
bookmarks on the browsers
contacts and messages
all apps (they're on my phone) and app data? (like will i lose my progress in temple run 2, lol)
Click to expand...
Click to collapse
I don't have this phone with me ATM.but I seem to remember when you press volume UP: and POWER it if i remember correctly would do the blinking light and vibrating a few times .Anyways to get in recovery You Press Volume DOWN and press POWER at same time should bring you to recovery and if running a custom recovery such as CWM or 4EXT you can try the wipe cache and wipe dalvik cache to see if fix issue or try if using a custom ROM you can try installing the ROM again without wiping data and system first.I Read your post and the replies and correct me if I am wrong it sounds like this might work and sounds like you are able to get to recovery from reading your post I think.I would try and confirm that you are or are not able to try these suggestions before you try the boot-loader suggestion with the PD15IMG.zip or whatever it is called ,these are assuming your rooted with a custom recovery such 4EXT if not and I read wrong again I apologize. Good Luck!

alternatively you could use adb if u installed it
1. connect ur phone via usb cable.
2. run cmd from ur android-sdk folder (or whatever you named it). by running in folder I mean, ur path in cmd should be C:/whatever-is-your-sdk-folder path
3. type this in cmd window "adb reboot bootloader" (without ")
it should load your phone in bootloader from where u can get more options like factory reset or install new rom (u can mount ur sd card in recovery & put new rom to flash on sd card)

Help Exposed Installation gone wrong

Hey, so I have had my phone rooted for a long time. I have a Galaxy S5 6.0.1 Marshmallow.
I decided I wanted to get Framework installed so I downloaded the right files and flashed it in TWRP.
My phone took way longer than 10 min to reboot into system so I thought I was stuck in a bootloop and decided to run my phone through TWRP again.
I tried rebooting but that didn't work. I have my phone's backup saved onto a micro SD so I did a factory reset and then tried rebooting.
I got past the rebooting logo and actually got to my lock screen where it asks for my password.
From there, I've been getting spammed with 3 different messages, one saying that IMS service is down, com.sec.vsimservice is down, and WfcService is down.
After I press ok to all 3 of the messages, my phone is still in the lock screen asking for my password but the phone doesn't recognize that im touching the screen to type. After letting the phone stay like that for a few minutes, the lock screen that asks for my password goes away and all I can see is my wallpaper background (no notification panel either) but now the phone recognizes me touching the screen ( I know that because the LED lights up for the windows button and back button )
So basically I decided to go into TWRP and flash my recovery that I had saved on the microSD.
After that didn't work, I've just been going through a series of factory resetting my phone and wiping Dalvik files and then flashing my recovery. My phone is getting unrealistically hot too.
Btw I never downloaded the Exposed Uninstaller from the forum so I tried downloading it onto my pc and then sending the file over to my phone through download mode using Odin so that I could flash the uninstaller through my TWRP but that didn't work because the PDA in Odin does not recognize the uninstaller file.
Please, I really need help and thanks to anyone who tries, it would mean a lot if someone could figure out what I can do. Thanks.

Since you've tried restoring your backup and everything seems to have failed (it sucks, I know) you should try to install a completely stock firmware which you can download from here: http://live.samsung-updates.com/index.php?device=SM-G900I Just make sure you select your exact phone model from the dropdown menu at the top right side as you didn't mentioned which of the 40 S5s you have lol. And after you flash stock firmware and successfully boot up try to restore your backup. If it's still bugged - flash stock again and start off fresh. Let me know how it turns out. I'll help with installing xposed later as well, first let's get your phone running again

Turned this phone into a brick and I need to fix it!

Hi, so, I got this phone from a friend, and he told me that the phone was working prorperly, but after someone factory resetted it, he wasn't able to set it up. Constant force close pop-ups where showing up while setting it up, and you weren't able to accept terms and conditions (button grayed out). Also, one thing I noticed. The phone got into "Factory Mode". Idk what that is, but it wouldn't let me to enable wifi or bluetooth. That little Factory mode thingy got me really confused. Also, I wanted to boot into recovery mode, and I wasn't able to do so. After turning the phone off, and doing the key combo to boot into recovery, the phone rebooted itself (very showrtly after doing the startup vibration) and after that, it seemd to get into recovery, but it stayed at the android logo with an exclamation sign and after 3 seconds it rebooted itself to system.
After that I said, "well, last thing to try is flashing stock rom again". And I did so. Using the Frija software to download the latest version of android for this phone (and using the corect CSC for this phone (CTI)). I used odin 3.12.7 (wich I knew it works because of previously using it with other phones) to flash the stock rom again. I made sure that only Auto-reboot and F.reset time were checked, and started flashing. After it finished, it got to the samsung logo, but got stuck there. Nothing happened (I left the phone there for like 30 min). I decided to hard-reboot the phone and try to factory-reset it, but after shutting it down, it started to be really hard to make the phone turn on. I had to unplug the battery and wait like 10 mins to try again, and I still wasnt able to boot into recovery mode. It just got stuck at the "Galaxy Core 2" logo.
After that first boot, the phone never got passed the "Galaxy Core 2" logo. Just stuck there. After that, things just begun to get worse. It was also hard to get the phone to get into download mode, most of the time it just stayed at a blackscreen (im not shure if the phone ever turned on, but it never vibrated) and did nothing. I decided to try other versions of odin. Tried with 3.09 and 3.04. Nothing, and after every flash, it got harder and harder to make the phone boot.
At this point, I can hardly get the phone into download mode, and if I do so, sometimes I get the odin complete write operation failed error, wich the only way that I've found to solve it is to reboot again the phone into download mode.
I know that the battery is working, I have another core 2 (same exact model) and battery is ok. At this moment I don't know what else to do. Please, help me to get this brick of a phone back to working conditions, I dont want my friend to buy a new phone just to use it to recive calls and charge it.
Some extra notes:
As i've read, sometimes this can be caused by the replacement of the digitizer/screen. This phone seems to have one or both of them replaced, since I can see glue residues on the corners of the glass, where it touches with the plastic frame.
If there is anything hardware related thing to try, I can try to open the phone. I have some experience doing so.

EDIT: As I continued reading through this forum, I found out that some people had luck with Odin3_v3.13.1_3B_PatcheD, so I decided to try it out and see. Still, nothing changed. As today, I can only use this phone to charge the battery (it dosent actually show the percentage, only the battery icon with a loading icon inside) and boot into download mode
Although, I have to say that after flashing the stock rom with that version of odin made the phone not that hard to start in download mode. I think that it could be something that got corrupted on the eMMC module and it has to repartition it all again...? Does anyone know how to do so?
Regards

Well, tried almost everithing I know. Downloaded rom again with binary nature, tried with odin version 3.12.7, 3.13.1_3b patched and 3.13.3, but nothing. Extracted the PIT file from the CSC file, did repartition, NAND wipe, and nothing changed. I have to say that its certaily easier to get the phone in download mode, but thats almost it. One thing to note, when i select the NAND wipe, it dosent seems to do anything. I mean, in odin Log screen some things appear related to NAND wiping and such, but its really fast and there are only 2 or 3 lines dedicated to that. Is that OK?
Anyway, please, any recoomendation or thing to try would be great, since this phone is now trash, it dosent matters if it starts to get worse, or even unusable (more than it is rn).
Regards