Hey everyone,
I flashed a new geenik kernal that I found in rom manager. It the 1.5.x kernal that was listed there. It flashed successfully but I lost all vibration for messages, alerts and even Baltic feedback. I can't stand not having that lol.
Any ideas?
ehasley said:
Hey everyone,
I flashed a new geenik kernal that I found in rom manager. It the 1.5.x kernal that was listed there. It flashed successfully but I lost all vibration for messages, alerts and even Baltic feedback. I can't stand not having that lol.
Any ideas?
Click to expand...
Click to collapse
Flash one of the older kernels that's not for DJ05.
I just did a band restore to a back up of the stock kernal. Didn't fix it. Would be cool if it was more obvious that kernal is for dj05...
Lol I digress
Try to flash the correct version of stupidfast again now. Wish me luck
Fixed thanks
Related
Hi, I recently tried updating to the 4.2.2 via a custom recovery (CWM). I was on matrix v5 custom kernel so i flashed to stock kernel. I made a nandroid backup before i flashed the stock kernel. I went ahead and updated and it removed my root and custom recovery, so i re flashed CWM via adb and restored to my nandroid backup9i know i could have just rooted again, but i just wanted to see if there were any big changes in 4.2.2, like otg support).
The problem starts here, my N4 wont rotate, or do anything where the sensors are needed. The phone was working properly at the time of the nandroid backup so its not anything i did before. Any and all help is appreciated. Thank you
desertflame said:
Hi, I recently tried updating to the 4.2.2 via a custom recovery (CWM). I was on matrix v5 custom kernel so i flashed to stock kernel. I made a nandroid backup before i flashed the stock kernel. I went ahead and updated and it removed my root and custom recovery, so i re flashed CWM via adb and restored to my nandroid backup9i know i could have just rooted again, but i just wanted to see if there were any big changes in 4.2.2, like otg support).
The problem starts here, my N4 wont rotate, or do anything where the sensors are needed. The phone was working properly at the time of the nandroid backup so its not anything i did before. Any and all help is appreciated. Thank you
Click to expand...
Click to collapse
This has already been answered...I dont have a link but keep looking through this forum and you will find a fix. Unfortunately if I flash a 4.2.2 rom and flash the fix it seems to break wifi....Im sure it will be resolved soon.
headcreepz said:
This has already been answered...I dont have a link but keep looking through this forum and you will find a fix. Unfortunately if I flash a 4.2.2 rom and flash the fix it seems to break wifi....Im sure it will be resolved soon.
Click to expand...
Click to collapse
Found it, Thank you
Sorry I didn't search, I was just worried I hope there's a fix for the wifi soon though!
desertflame said:
Found it, Thank you
Sorry I didn't search, I was just worried I hope there's a fix for the wifi soon though!
Click to expand...
Click to collapse
EDIT: Fixed. I reflashed 4.2.1 from stock then rooted etc. Then flashed the 4.2.2 update. Everything works properly now.
Just to add something incase other look through this: The 4.2.2 update needs the updated baseband.
From http://forum.xda-developers.com/showpost.php?p=37977813&postcount=3:
4.2.1 Baseband = M9615A-CEFWMAZM-2.0.1700.33
4.2.2 Baseband = M9615A-CEFWMAZM-2.0.1700.48
Not Compatible - 4.2.2 Baseband With 4.2.1 Rom - Reportedly breaks sensors.
Not Compatible - 4.2.1 Baseband With 4.2.2 Rom - Reportedly breaks in-call audio.
Hi
I am currently on root stock 4.2.1 with faux kernel and twrp recovery
Obviously i cannot use the ota update.
What steps should I take if I want to update to 4.2.2 and keeping all my app data and the 4.2.1 radio?
I tried to figure this out by reading but it just got to confusing...
Thanks very much in advance
strikeraj said:
Hi
I am currently on root stock 4.2.1 with faux kernel and twrp recovery
Obviously i cannot use the ota update.
What steps should I take if I want to update to 4.2.2 and keeping all my app data and the 4.2.1 radio?
I tried to figure this out by reading but it just got to confusing...
Thanks very much in advance
Click to expand...
Click to collapse
The easiest way is to download an deodexed rom. Link below.
http://forum.xda-developers.com/showthread.php?t=2010887
Download the deodexed stock 4.2.2 rom and flash it without wiping anything. This will only flash the rom and no baseband will be flashed alongside it.
Butttttttt some people have been having issues using the .33 baseband on the new 4.2.2 update. What issues? When they make a call,you can't speak into the mic and you wont be able to hear the other person. It's just mute. You won't even hear the phone ringing as in when it's dialing/trying to connect to the caller.
I have a question for y'all experts lol :silly: i got my nexus 4 over the weekend and am already rooted with SuperSU, and am running TWRP as my recovery. the problem I am having is with flashing roms/radios. I tried installing toasted marshmallow (here) and had the following problems. after running the awesome wipe script, I flashed the rom followed by infernogapps and rebooted. After waiting about half an hour, the phone was still at the bootup animation. So I shut the phone off restored to the stock image and tried to find out what I was doing wrong. I saw something about 4.2.2 radios and tried to flash the fko1/fko2 radios prior to reflashing. the flash came up FAILED, saying that there was no md5sum and there was an error within the samsung packages? i tried to reflash the rom anyway, once again with no success. ANY ADVICE WOULD BE HELPFUL as I would really like to try out this rom. I'm not new to rooting or flashing roms or anything, however I am no expert and this is my first time attempting to flash roms to this particular device.
--Thanks
Rooted beer said:
I have a question for y'all experts lol :silly: i got my nexus 4 over the weekend and am already rooted with SuperSU, and am running TWRP as my recovery. the problem I am having is with flashing roms/radios. I tried installing toasted marshmallow (here) and had the following problems. after running the awesome wipe script, I flashed the rom followed by infernogapps and rebooted. After waiting about half an hour, the phone was still at the bootup animation. So I shut the phone off restored to the stock image and tried to find out what I was doing wrong. I saw something about 4.2.2 radios and tried to flash the fko1/fko2 radios prior to reflashing. the flash came up FAILED, saying that there was no md5sum and there was an error within the samsung packages? i tried to reflash the rom anyway, once again with no success. ANY ADVICE WOULD BE HELPFUL as I would really like to try out this rom. I'm not new to rooting or flashing roms or anything, however I am no expert and this is my first time attempting to flash roms to this particular device.
--Thanks
Click to expand...
Click to collapse
Here is the radio/modem for 4.2.2 http://www.mediafire.com/download.php?pj0mebqq219cr0q, flash with cwm/twrp.
worked like a charm, thank you
Rooted beer said:
worked like a charm, thank you
Click to expand...
Click to collapse
You`re welcome mate
gee2012 said:
You`re welcome mate
Click to expand...
Click to collapse
Now if i wanted to revert to a rom that is based on 4.2.1, would these radios cause issues? If so could you link me to radios that would work? Thanks
Rooted beer said:
Now if i wanted to revert to a rom that is based on 4.2.1, would these radios cause issues? If so could you link me to radios that would work? Thanks
Click to expand...
Click to collapse
You can find a link to the flashable zip of the 0.33 version radio on this post by efrant... http://forum.xda-developers.com/showpost.php?p=36400943&postcount=1
I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx
Xetalx said:
I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx
Click to expand...
Click to collapse
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.
blyndfyre said:
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.
Click to expand...
Click to collapse
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx
TARs are flashed with Odin or Mobile Odin.
Xetalx said:
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx
Click to expand...
Click to collapse
If you are flashing the STOCK firmware for your specific carrier it will include the STOCK kernel.
If you are using a custom ROM like Mint Jelly or something, I'd say flash Adam kernel after flashing the ROM. You won't want to flash a STOCK kernel with a custom ROM.
Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you
travisobvs said:
Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you
Click to expand...
Click to collapse
Regarding wifi on CleanROM, did you check post #2 here?
bo8 said:
Regarding wifi on CleanROM, did you check post #2 here?
Click to expand...
Click to collapse
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.
travisobvs said:
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.
Click to expand...
Click to collapse
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.
Any updates?
bo8 said:
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.
Click to expand...
Click to collapse
Hey guys,
I am also a 1337m Rogers S4 (MDJ) owner, also a noob as well. I managed to flash my phone with CM and had a pretty good AOSP experience and learned a little bit on the way. I can legitimately say that I miss a couple thing about stock / Touch wiz, mainly the multiwindow support and camera. Cyanogenmod is also acting up and drains battery pretty bad when I am roaming in the states.
What did you guys end up doing? Did you update your base-band to mdk and install CleanRom? Right now that looks like it's my goal but I truthfully have no idea how to do it.
Did you guys go back to stock after changing? Do I just find a stock ROM on the forum and use ODIN to bring it back?
Is switching roms as easy as choosing something in Goo manager or do you need to go into a recovery in recovery mode?
Thank you!
So basically i decided to flash a new ROM which is the MIUI 3.12.6, but when i try to activate my WiFi it seems Luke it cant be turned on.
I tried all the solutions that the developers has written in the original rom post.
I even tried to flash a new modem using odin. But nothing has worked. May i guys be helped by your experience?
Thanks in advance!!
ekheeQ said:
So basically i decided to flash a new ROM which is the MIUI 3.12.6, but when i try to activate my WiFi it seems Luke it cant be turned on.
I tried all the solutions that the developers has written in the original rom post.
I even tried to flash a new modem using odin. But nothing has worked. May i guys be helped by your experience?
Thanks in advance!!
Click to expand...
Click to collapse
if u installed a custom kernel it could happen, i got it to work when going back to stock with nandroid backup... also got it working with goldeneye rom (GE-i9505-XXUEMKE-15).. havent tested anything else so far...
hagall said:
if u installed a custom kernel it could happen, i got it to work when going back to stock with nandroid backup... also got it working with goldeneye rom (GE-i9505-XXUEMKE-15).. havent tested anything else so far...
Click to expand...
Click to collapse
So what would be the solution?
Flashing the original kernel or try to flash custom rom/kernel untill u find it works... also the text saying bla bla seandroid bla bla warranty bla kernel at boot dissapeard when i used my nandroid backup for restore
DrBlaze. i9505 xda-premium app.